If you are tired of classic socks knitted with an elastic band and stockinette stitch, but want some variety that is not too complicated, then this model is for you! A very simple raised stitch pattern made from a combination of knit and purl stitches that looks great on solids and fine section dyed yarns.
Made from plain yarn.
Two colors.
Will be needed.
Thin warm yarn (about 400 m per 100 g)
Stocking needles No. 2 or another size of knitting needles suitable for knitting density.
Knitting density: 36 pet. = 10 cm.
The size is designed for the thickness of an average female leg, the length can be varied.
Relief pattern “Staircase”:
(Repeat from * to *)
Row 1: *K3, P1*
Row 2: knit
Row 3: *K1, P1, K2*
Row 4: knit
Double heel pattern:
Row 1: K3, purl to end of row.
Row 2: P3, *k1, slip 1 stitch* to last 3 stitches, k3.
Row 3: K3, purl to end of row.
Row 4: P3, *slip 1 stitch, k1* to last 3 stitches, k3.
Closer view of the heel.
Note.
Everywhere in the description “remove 1 point.” means that you need to remove the loop, as when knitting purl.
2 persons together. with a slant to the left - remove the loop as when knitting, slip the next loop as when knitting, put both removed loops on the left knitting needle, knit together with the knitting needle crossed (the knitting needle is inserted from top to bottom).
Description.
Rubber.
Cast on 64 stitches, distribute equally (16) onto 4 knitting needles and knit in the round with 1x1 rib for 20 rows.
Elastic band: *K1, P1*
Start of the heel.
Knit on the loops of two stocking needles in the forward and reverse directions; for convenience, you can transfer all 32 loops to one knitting needle.
Knit the double heel pattern for 8 repetitions, which will give 16 loops around the edges.
Rounding of the heel.
Place the work with the wrong side facing you,
remove 1 stitch, purl 16, purl 2 together, purl 1, turn
Track. row: slip 1 stitch, knit 3, knit 2 together. with a tilt to the left, 1 person, turn
Track. row: remove 1 stitch, purl 4, purl 2 together, purl 1, turn
Track. row: slip 1 stitch, knit 5, knit 2 together. with a tilt to the left, 1 person, turn
Track. row: remove 1 stitch, purl 6, purl 2 together, purl 1, turn
Track. row: slip 1 stitch, knit 7, knit 2 together. with a tilt to the left, 1 person, turn
**continue in this manner until all the stitches have been knitted - there should be 18 stitches left on the knitting needle.**
A set of loops along the edges of the heel.
With the knitting needle set aside, cast on 16 stitches along the right edge of the heel, picking up one of the arms of the edge loop. Cast on one additional loop to close the hole that was created on the side between the heel and the top of the sock (set aside stitches that were not included in the heel), place a marker, knit knit on two needles that were not included in knitting the heel.
Place a marker, dial extra. loop to close the side hole between the heel and the top of the sock, cast on 16 loops from the edge loops along the left edge of the heel. Knit them and knit 9 more stitches from the 18 stitches remaining after rounding the heel, transferring them to one needle. Transfer the remaining 9 loops to the next stitch. knitting needle
**there should be a total of 84 stitches on the needles**
Decreases.
Preliminary row.
Knit up to 2 stitches to the marker, knit 2 together. with a slant to the left, retake the marker, then continue knitting with the “Staircase” pattern to the next. marker, re-shoot the marker, k2 together.
Row 1: Knit. to next marker, without tying 3 stitches before it, k2 together, k1, re-slip the marker, knit with the “Staircase” pattern to the marker, re-slip the marker, k1, k2 together. with a tilt to the left.
Row 2: Knit to marker, re-slip marker, knit in Ladder pattern to marker, re-slip marker.
**Repeat these two rows until the total number of stitches is 64 stitches (16 stitches per needle) (17 rows in total, not counting the preliminary row)**
Next, continue to knit on the top two needles with the “Staircase” pattern, and on the sole loops (2 bottom needles) in stockinette stitch up to the tip of the little finger. Knitting in front of the toe should stop after knitting the 4th row of the relief pattern.
Toe.
A number of decreases are knitted as follows:
*Knit 1, knit 2 together. with a slant to the left, knit the remaining stitches on this needle and the stitches on the next stitch. knitting needle, without finishing 3 stitches, knit 2 together, knit 1* - repeat 2 times.
Row 1: Work a row of decreases (15 stitches on each needle)
Rows 2 and 3: Knit
Row 4: Work a row of decreases (14 stitches on each needle)
Rows 5 and 6: Knit
Row 7: Work a row of decreases (13 stitches on each needle)
Rows 8 and 9: Knit
Row 10: Work a row of decreases (12 stitches on each needle)
Row 11: Knit
Row 12: Work a row of decreases (11 stitches on each needle)
Row 13: Knit
Row 14: Work a row of decreases (10 stitches on each needle)
Row 15: Knit
Row 16: Work a row of decreases (9 stitches on each needle)
Row 17: Work a row of decreases (8 stitches on each needle)
Row 18: Work a row of decreases (7 stitches on each needle)
Row 19: Work a row of decreases (6 stitches on each needle)
In the cold season, knitting children's socks with knitting needles is simply necessary. It is so important that the child’s feet are warm. For a year, 2 and 3 years, choose wool yarn or alpaca yarn, with an admixture of artificial fiber, for example, polyamide. When knitting the heel, it would be nice to add a thin bobbin thread. Summer openwork socks are knitted for beginners from cotton yarn. At the end you will find patterns of cats for knitting jacquard.
How to calculate the number of loops for knitting a sock
In order not to start work over and over again, before knitting children's socks with knitting needles, we will calculate the required number of loops. In order for the socks to fit your child perfectly, you need to take into account the height of the leg, the size of the shin and the size of the foot itself.
- There are circumstances when trying on a sock is impossible - then use the formula: X: 3 x 2 = Y, in which X means the shoe size, and Y is the length of the foot. X: 3 x 2 = Y
where X is the shoe size, and Y is the foot size in centimeters. For children's socks with knitting needles you will need 50 g. yarn. - If this seems difficult to you, there are tables that indicate how many stitches to cast on according to the knitting density. It is necessary to knit a “tester” - 10/10 cm in order to calculate the required number of loops.
- Another option for determining the number of loops. It is necessary to take 2 measurements of the baby’s legs: the 1st measurement is the circumference of the instep, it is measured with a centimeter at the widest point of the instep. 2nd measurement – leg circumference, measured above the bone. Next, we find the average circumference: plus the circumference of the volume and the circumference of the leg and divide by 2. See so much and do the calculation for the set of p.
- And the last option. Everyone knows that the anatomy of the leg has its own proportions. Look at the size ratio of the leg. You can't go wrong if you cast on the number of stitches on your knitting needles that correspond to the size: (top of the foot + sole = 100%). This is the size you need for the correct set of loops. Next we will knit beautiful socks with a step-by-step master class.
A set of loops in accordance with the anatomy of the leg.
Size chart for different knitting densities.
We will knit these original socks step by step with knitting needles for a child aged 3 – 4 years. We will knit on five needles in the simplest “grandmother’s” way. Knitting children's socks is something that is suitable for beginners who are just starting to knit. This simple way to knit baby socks will also come in handy for those who knew but forgot this technique.
Abbreviations: p. - loop, r. – row, l. – front, from. - purl, sp. - knitting needles, inm. - together.
To work you will need:
- 5 double needles, 3 mm thick.
- Yarn – wool with polyamide (150 m/50 g) – 1 skein of gray and 1 skein of blue.
- Black and red thread for the cat's face.
- An eraser at the end of each knitting needle is to prevent the yarn from slipping off the knitting needles.
- Pins or markers.
Table number 1, which helps to knit children's socks.
A 3-4 year old child’s foot corresponds to shoe size 26/27 and the foot size is 16-17 cm. We cast on 44 stitches with gray yarn. We focus on table number 1. We distribute all 44 stitches onto 4 knitting needles - on each knitting needle you will get 11 stitches. We will knit an elastic band first, and then circular rows. Mark the place of transition from one river to another. (between the 1st and 4th sp.) – with a marker. An elastic band can be knitted as in the photo (1 knit/1 knit), but, as a rule, such an elastic band stretches out quickly. Therefore, it is better to tie a 2/2 elastic band. Knitted 10 rubles. with an elastic band and move on to the faces. smooth surface We knit as many r., how high you want to make the socks. In this model there are only 6 rubles, usually 10 cm. In this place, patterns and patterns with jacquard are usually knitted.
Next, we will knit the heel wall. We will do this on the 1st and 4th sp. facial stitch. We are not touching the 2nd and 3rd spokes yet. We look at table 1: heel wall – 22 r. (44: 2), heel wall height – 14 r. (4 cm). If you knit the first and last sts in garter stitch, this will make it easier for you to count p.
Next, you need to tie the bottom of the heel. Divide 22 sts into 3 parts (7;8;7). Mark with markers. We got 7 stitches on both sides, and 8 stitches in the middle. We start with the front row: knit 14. sts, k2 together, turn the work over (we don’t knit the remaining 6 sts, leave it like that.
2nd row: 8 p., 2 in. purl, turn over (leave 5 stitches unknitted).
3rd row: 8 persons, 2 vm. faces., turn the knitting over.
4th row: 8 out., 2 in. l., turn the knitting over.
And so on until there are 8 loops left on the knitting needle.
Now we have 8 stitches left. Next, we need to cast on as many stitches from the edges on the knitting needles as we have in table number 1 on both sides (the number of loops for casting on the side edges of the heel is 11, but we will take a little less - 9 stitches. ). In the place where the tail of the thread sticks out, we pick up 9 sts on the knitting needle and knit them, then we have 11 sts, another 11 sts, and again we pick up 9 sts on the knitting needle, knitting their faces. And here we have circular knitting again. There are currently 48 stitches on the needles.
And in this place it would be good to try on the sock on your foot. If it is too wide, reduce it. If the number of stitches suits you, we knit further in the circle, distributing the stitches: 12 stitches on each knitting needle. The beginning of the circular row is in the middle of the bottom of the heel (mark with a marker). We have 48 stitches on our knitting needles. We knit across a row of 2 knits together. Let's focus on the marker. Knitted 8 r. and decreased 4 p. 44 p. left, on each sp. – 11 p. Next, we begin to make the cat’s ears. Our pattern is 32 stitches, which means we add 12 stitches to the pattern, 6 on each side, and start knitting from the ears, from the 30th row:
To ensure that the long blue thread on the inside doesn’t bother you, make 2 blue balls. Gray yarn: 14 knits. p. gray, 1 person. p. blue, 14 p. gray, 1 p. blue, 14 l. n. gray.
29th r.: 13 l. p. gray, 3 l. n. blue, 12 l. p. gray, 3 l. n. blue, 13 l. n. gray.
28th r.: 12 l. p. gray, 5 l. n. blue, 10 l. p. gray, 5 blue, 12 l. n. gray.
27th r.: 11 l. p. gray, 7 l. n. blue, 8 l. p. gray, 7 l. n. blue, 11 l. n. gray.
26th r.: 10 l. n. gray, 9 blue, 6 gray, 9 blue, 10 gray.
25th r.: 44 l. n. blue.
The length of the foot to the toe is 13.5 cm (see table). We knit according to the pattern up to this point. We reach the little toe. Next we begin to make the toe. We make decreases at the end of every 11 stitches (2 stitches together). So we decrease until 2 stitches remain on the knitting needles. We cut the thread. We pull the end of the thread through these loops. We remove the tail.
The second sock is knitted in the same way, only it starts with blue yarn, with an elastic band.
In the video: how to knit children's socks on 5 knitting needles.
Children's socks on two knitting needles - master class with description
Children's socks on two knitting needles - this master class will be useful for those who do not like to knit on 5 knitting needles. We knit socks on 2 knitting needles, three more knitting needles are auxiliary. Then we sew the product with a needle and native thread. The product corresponds to size 22/23, foot length – 15 cm. Socks are knitted for ages 3 years.
To work you will need:
- Yarn – wool or wool blend – 1 skein 50 g.
- Stocking knitting needles 3.5 mm thick.
- The needle is thick.
We knit the upper part of the sock. We cast on 39 sts and plus 2 edge sts, for a total of 41 sts.
1st r.: edge, 1 person. p., 1 p., and so on until the end of the r., at the end - the edge.
2nd r.: chrome, 1 p. p., 1 l. etc., and so on until the end, at the end - chrome.
And so continue with an elastic band for 28 rows.
Next, we make a “tongue”: we knit it at 13 sts, and don’t touch the remaining sts!
1st row: chrome, 26 persons. etc., turn the work around.
2nd row: 13 persons. etc., turn the work around.
3rd row: k13, turn.
And so we knit garter stitch (knit stitches alone) for 34 rows. We got it: 14 sts on the first knitting needle, 13 for the tongue, 14 sts on the second knitting needle.
35th r. already without chrome. p.: knit 2 together, knit 9, knit 2 together.
36th r.: all facial.
37th r: 2 vm. persons., 7 persons., 2 vm. persons
38th r: all persons.
39th r: 2 vm. persons., 5 persons., 2 vm. l.
Next, we knit the circumference of the sock.
We tied the tongue to the end. We have left on the joint. 7 p.
1st r. sock circumference: raise 19 sts along the left side of the “tongue”, knit plus these 19 sts, another 13 sts from the second knitting needle and edge. Knit faces. Turn.
It turns out 7 stitches of “tongue” on a separate needle.
2nd r: chrome, knit 32, plus another 7 p. “tongue” knit. – total 39 p.
In total it turned out to be 71 points plus 2 chrome. (73 p. on the spread).
1st row: chrome, 2 vm. persons., 28 persons., 2 vm. l., 3 l., 2 vm. l., 3 persons., 2 vm. l., 27 faces., 2 vm. l., chrome.
2nd row: chrome, 66 persons. chrome
3rd row: chrome, 2 vm. l., 26 l., 2 vm. l., 2 l., 2 vm. l., 2 l., 2 vm. l., 26 l., 2 vm. l., chrome.
4th row: chrome, 61 persons, chrome.
5th row: chrome, 2 vm. l., 24 l., 2 vm. l., 1 l., 2 vm. l., 1 l., 2 vm. l., 25 l., 2 vm. l., chrome.
6th row: chrome, 56 l. n., chrome.
7th: 2 vm. l., 22 l., 2 vm. l., 2 vm. l., 24 l., 2 vm. l., chrome.
8th: chrome, 51 l., chrome.
Then we sew the top, heel and foot. We hide the end of the thread. Knit another sock like this.
In the video: an easy way to knit socks for 1-2 years old.
Openwork socks are knitted for ages 6-8 years with medium-thick cotton yarn on 5 3 mm needles. Foot length – 20 cm. Size 30-31. We will knit openwork socks in the round. To make it easier for you to knit, check table number 1 in the first master class.
We cast on 48 sts on 2 knitting needles, distribute them across 4 knitting needles (12 sts each) and knit further in the round:
1st r.: entire r. – facial.
2nd row: purl.
3rd: persons.
4th: purl.
5th, 6th, 7th - persons.
8th: purl.
9th: persons.
10th: purl.
11th and 12th: knit.
13th we make small holes for the laces: chrome, yarn over, knit 2 together, yarn over, 2 ins. l., and so on until the end of the river.
14th row: repeat the pattern from the 1st to the 12th row
Next, we knit the heel: 24 sts. Knit 7 cm in height (16 rows) on two sp., the remaining 2 sp. don't touch.
17th row: divide the same 24 sts of the heel into 3 parts (7;10;7) sts. Knit only the middle 10 sts. Start with the front row. So: 6 l., 2 vm. l., 10 l., 2 vm. l., 6 l. Rotate the work.
18th: 5 p., 2 in. purl, knit 10, inm 2 out., 5 out.
Next, we raise the side stitches on one side and the other (see the first master class). You need to raise 12 sts on each side. Distribute the sts like this: 28 sts on 2 sps, 26 sts on the remaining 2 sps. 28 sts are our rapport (see diagram), on these sts we will knit only the pattern (top of the sock).
On the remaining 2 bedrooms. Gradually decrease 6 extra stitches so that 48 stitches remain in the circle. Work 16 cm to the toe and begin decreasing. Decreases should be done like this: divide the entire canvas into 4 parts and do 2 cm after each. (11 p., 2 in., 11 p., 2 in., and so on) knit the toe to the end. We pull the thread through the last stitches and fasten it inside. Openwork socks are ready.
Cats - patterns for jacquard
Interesting jacquards for children will be useful for decorating socks, scarves, mittens, mittens, clothes, and so on. There can never be too many hand-knitted children's things. According to table number 1, you can independently knit socks for a child of 1 year and 2 years, as well as for 7-8-9 years. Children love bright socks with jacquard - now you can knit children's socks with knitting needles.
№ 5
scheme
№ 6
Summer socks model
This model is perfect for a cool summer evening outdoors. We knit openwork socks with 2.5 mm knitting needles from DROPS FABEL yarn with a composition of 75% wool / 25% polyamide, thickness 200 m / 50 g. Schemes for making an openwork pattern are presented below.
Symbols for diagrams.
Face loop:
1 yarn over:
2 together front:
Slip 1 stitch, knit a second stitch and pull through the previous one:
Slip 1 stitch, knit 2 together, pull the resulting loop through the removed one:
For leg size 35-37, you need to cast on 62 stitches on stocking needles and knit two rows with stockinette stitch, then perform 6 circles with a 1x1 rib. In the seventh row, knit the first 11 loops with an elastic band, and the remaining 51 loops with the front stitch, while evenly decreasing 10 loops. As a result, 52 loops remain. In the next row we knit the first 11 loops with a 1x1 elastic band, and the remaining 41 loops with an M1 pattern. When the length of the product becomes 16 cm, you need to leave an elastic band and 8 loops on each side, transferring the remaining loops to a pin - this will be the front part of the sock. Knit the loops on the knitting needles in stockinette stitch another 5 cm up. Place a marker in the center and continue measuring from there. We knit the heel as follows:
First row (knit): knit until the last 7 stitches, slip one stitch, then knit one, pull it through the removed stitch and turn around.
Second row (purl): we knit purl until the last 7 loops, remove one, then purl one, which we pull through the removed one, and turn around.
Third row: knit until the last 6 stitches, slip one, knit one, pull it through the removed stitch, turn around.
Fourth row: we knit purl until the last six loops, remove one, purl one, which we pull through the removed one, and turn around.
We knit like this until there are 15 stitches left on the knitting needles. Then we pick up 13 loops on each side and return the loops from the pin, so there are 66 loops on the knitting needles. We highlight the central 25 loops with a marker on both sides - this is the upper part of the foot. Then we knit the same 25 loops with the M2 pattern, and we knit the remaining loops with stockinette stitch, while it is necessary to make decreases on the sides as follows: 2 knit stitches together before the marker and 2 knit stitches together after the pattern and 2 markers. Make such decreases 8 times so that 50 loops remain. Carry out the pattern up to 18 cm from the center of the heel. Place markers on the sides - 25 stitches on top and 25 on the bottom and knit in stockinette stitch. In this case, it is necessary to make decreases to form the sock 2 stitches before the marker as follows: knit 2 together, marker, knit 2 together crossed. It is necessary to decrease every other row 4 times, then 6 times in each row. Pull and fasten the remaining 10 loops.
We also offer two more openwork patterns that are ideal for beautiful socks:
With a little thought, you can take this pattern as a basis and develop your own model.
Socks are a traditional, affordable item of clothing that you can make yourself by knitting them using knitting needles. It would seem, how can you decorate knitted socks so that they are the most beautiful? There are many options - these are classic braids, and the presence of openwork jacquard patterns of different configurations not only for adults, but also for children. Let's look at the original patterns below and learn how to knit socks with beautiful patterns. Let's make sure that they can be used not only in dress fabric or when designing a sweater.
Knitting socks - several suitable patterns
Today, socks can be decorated with any patterns you like, sew on a balabon, symmetrically divide the color scheme, and also apply other ideas, including your own imagination, or by watching a video on the Internet. As a result, needlewomen receive warm, original socks with an element of openwork or other decors.
When knitting socks with knitting needles, it is possible to use various patterns. Today their availability on the Internet is great and there can be no problems with this. The most beautiful patterns and patterns are provided below. The main thing is to learn how to correctly knit the main elements of this item - the heels and toes. So, in order to knit the warmest and most beautiful socks, you need to build on your own skills, choose the appropriate yarn, the purpose and appearance of the future item.
If you plan to knit socks for children who will serve as foot warmers, then the best option would be thick yarn and a knitted pattern. A decorative model will be made from thinner yarn, using an openwork print or voluminous decoration (pompons, ruffles, appliqués). You can view diagrams and videos below:
Jacquard patterns - beautiful patterns
Jacquard is considered a classic, which is certainly in demand in the winter. But knitting them is a bit related to options with particularly complex ideas:
- you have to work synchronously with threads of different colors;
- you need to learn how to change them in a timely manner;
- create the correct thread tension;
- observe the required knitting density.
The optimal solution in the arrangement of jacquard motifs is stripes with patterns. They can be placed on the cuffs and on that section of the sock panel that is intended for decoration of this place.
To knit openwork socks for children, which are completely covered with a colored pattern, you need to repeat the selected pattern one by one, and so on until the item is completely ready.
The ornament can be alternated with several rows knitted only with facial loops, a single-color thread or other simple patterns. Schemes of the original ornaments are shown in the photo below:
Knitting socks - options for placing a pattern in the sock fabric
There are some options for the distribution of the pattern on the knitted fabric of the sock; they differ in the complexity and speed of the work. Thanks to them, needlewomen create many incredibly beautiful models, including openwork ones:
- ornaments occupying the entire panel;
- patterns on cuffs;
- ornaments for children in the form of elongated stripes.
When knitting socks using knitting needles, the main thing is to choose the appropriate pattern and the most beautiful patterns. Beginner knitters will do better with simple patterns that illustrate elements with a narrow longitudinal report. The vertical pattern will succinctly fit it into the fabric of the sock itself. The report, which is arranged in a checkerboard pattern, is more complex, and often the craftswomen get confused when calculating the loops where the heel begins to be knitted. This option can be used when decorating an even cuff when knitting socks for children. So, we looked at the topic: “Knitting socks, beautiful patterns” and a training video, now you can try to master this type of needlework yourself using a simple example.
1. set of knitting needles of 5 pieces, size No. 3. For knitting baby socks, medium length is enough.
2. Alize Classic knitting threads made in Turkey. Composition: 49% wool and 51% acrylic. The weight of one skein is 100 grams, the total length is 390 meters per skein. To work you will need three colors. The main one is white and two additional ones: dark blue and green. For socks for 3-4 years, you can use leftover threads, because... consumption is minimal (even for the main color, 1/5 of a skein is enough).
3. hook No. 3 (only needed to remove the ends of the threads covering the product itself).
For socks for 3-4 years, size 25, foot length approximately 18 cm, you will need to cast on 52 loops with white thread.
We leave the cast-on loops on 1 knitting needle, and simply remove the second one. Next we distribute 13 loops onto 4 knitting needles. We start by connecting the first and fourth needles. Thus, from 52 loops, evenly distributed on 4 working knitting needles, you should get an equilateral block.
The elastic band consists of three stripes, two white and one dark blue. Knitting begins with white according to the 2x2 pattern, 2 knit stitches x 2. It is more convenient to start the first row with knit stitches. The elastic is knitted 10 rows in white, then 10 rows in blue, the third white strip of elastic - 10 rows. Thus, the height of the elastic band will be 7 cm.
Without adding or subtracting the number of loops after the elastic band, the main part continues with white thread only with facial loops. All 52 loops remain on the needles. 3 rows of transition to the main part is quite enough
Knitting heel:
Prerequisite: the required number of loops is transferred to 1 knitting needle. The rest remain on 2 knitting needles. Work continues only on knitting the heel length.
For work, take 26 loops on 1 knitting needle. Using white thread, knit stitches on the outside, purl when knitting the reverse row. In this way, 7 rows are knitted - this is the main height (approximately equal to 2 cm).
In the following rows, 2 loops are knitted together (on the front side) according to the pattern:
8 row - 8+9 loop and 17 and 18 loop
Row 9 (and all odd ones) – purl all stitches
Row 10 - 7 + 8 loop and 17 and 18 loop
12 row – 6 +7 loop and 17 and 18 loop
14 row – 5 +6 loop and 17 and 18 loop
16th row – 4+ 5th loop and 17th and 18th loop
18 row – 3+ 4 loop and 17 and 18 loop
20 row – 2 + 3 loop and 17 and 18 loop
22nd row – 1+ 2nd loop and 17th and 18th loop
Thus, the heel is closed on the working needle, 9 loops remain
Continue working as follows: based on the length of the heel, you need to cast on 9 loops on each side.
The heel work is finished. The work should be 54 loops. If you made a mistake in the calculation somewhere, it’s okay, the missing loop can always be added at this stage.
Knitting foot:
After all 54 loops are worked, you need to knit 3 rows with white thread. Then we continue with the ornament.
Ornament:
Perform the pattern using facial loops.
A herringbone can be knitted on only one of the socks - this will help parents teach their baby the concepts of left and right if they wear (for example, only on the left leg) a sock with a herringbone. Blue pattern repeats are knitted in the round throughout the whole product, the herringbone is knitted alone on the top of the foot.
