Which cutter to remove gel extensions with. How to properly remove gel polish with a cutter. Nail polish removers

Shellac- a long-term nail coating that has gained its popularity due to maintaining its original appearance for several weeks. Many ladies, in the desire to maintain the beautiful appearance of well-groomed hands, use the properties of gel polish. But not all of them know how to remove shellac on their own, as they consider this procedure long, difficult and painful. Today we will debunk false claims about the long and difficult process of removing shellac.

The main thing in the article

How to properly remove shellac at home?

Before starting any work, you need to prepare the necessary materials. In this case you will need:

• Specialized remover;
• Orange sticks;
• Cotton pads;
• Foil;
• File;
• Buff;
• Nail oil;
• A sheet of paper or a towel.

Some tips for self-removal:

• Peeling occurs faster in warm conditions. Therefore, in the cold season, before removing shellac, pre-warm your hands.
• Before applying the product, read the information on the bottle and ensure the exact time of use.
• Apply the product to the disc until it is completely wet, but not dripping.
• The burning sensation is the result of the excess part of the disc touching the skin. To avoid this, use the disc size according to the size of the nail plate.
• You can remove peeled parts of gel polish not only with an orange stick, but also with a pusher or a metal spatula. The main thing in this matter is the correct technique. The movement should be gentle and in the direction of plate growth.
• The time for keeping the plates closed should be specified on the packaging so as not to injure the skin. On average it takes 10 minutes.

How to remove gel polish yourself without harm: basic methods

• are produced by different companies, which affects their operational features. There are samples that last much longer than varnishes from other companies. These are the ones that are more difficult to remove than others.
• The base for gel polish is also important. There are two types of basic funds: liquid And thick. The difference between them is that the thick ones penetrate deeper into the plate, and therefore are more difficult to remove. As for liquid ones, they are much easier to remove, since they do not need to be rubbed in and they do not penetrate so deeply into the nail.

Based on this, there are a number of ways to remove manicure done with gel polish:

1. By using foil And specialized means.
2. With help buffa with high abrasiveness, files or Fraser.
3. By using clothespins or caps.
4. With help alcohol-containing products.
5. With help remover.

How long does it take to remove shellac?

• The time to remove gel polish depends entirely on the chosen removal method. If you use specialized products, then the result will not keep you waiting long. Well, if you decide to use unconventional methods, then you should be patient.
• On average, the work takes from 10 to 15 minutes, provided that you use professional components. But the result may appear much later if you do not use specialized cosmetics - approximately 20 to 30 minutes using regular removal liquid or alcohol-containing substances.

Do I need to remove the gel polish base?

In order to give your hands a renewed, well-groomed look, you need to remove the old coating, which consists of several layers. Basically, this is a base, main color and top coat.

• Top can be removed using corrosive substances, or using a file, buff or framer. The choice of method depends on the density of the product; the denser it is, the more effective.
• Main color removed using a special liquid. The processed plates are placed in a confined space, where they remain for an average of 10 minutes. During this time, the composition applied to the surface begins to act.
• Base removed with a file. After removing the main coating with a spatula, residues of the base are present on the plate. It can be removed using a natural nail file, guiding it along the growth of the plate. Afterwards they should be lubricated with an oily substance.

How to remove shellac at home with a special liquid?

Required:

• Special remover;
• Metal spatula;
• Cotton pads;
• Foil;
• File;
• Buff;
• Oil for nail plates.

Progress:

How to remove shellac with foil?

• Removing a layer of varnish that no longer looks the same as in the first days is possible at home. To do this, use small pieces of foil, measuring 7x10 centimeters.
• Prepare pieces for each phalanx of the fingers. And after applying the moistened cotton pad, begin to envelop each finger in turn.
• Start wrapping the phalanx first, focusing on the middle of the finger. Then twist the tip like a candy. Or you can make a few turns to secure it and wrap it under the inside of the finger.

Is it possible to remove gel polish with regular nail polish remover?

• If you did not have the opportunity to acquire a professional product or for some reason did not find it, you can use the usual nail polish remover. Just know that it will take more time.
• To simplify the procedure, first remove the top glossy layer with a file. And only then moisten the pieces of disks with a liquid solution. Try to saturate the entire surface of the cotton wool.
• Wrap each nail surface in turn and insert your fingers into special caps or wrap them in foil. Wait 15 to 20 minutes and then proceed to mechanical action.

Will liquid remove gel polish without acetone?

• Acetone is an excellent solvent that helps to easily remove solids such as gel polish. Therefore, its presence is necessary in all professional products that are designed to remove varnish.
• If an ordinary liquid without acetone can overcome the presence of regular nail polish, then it cannot remove gel polish. Therefore, the answer to the question that interests many is simple - liquid without acetone will not cope with its removal task .

How to remove gel polish with remover?

• Removers They are different and each has its own purpose. We will look at a cuticle remover, which, thanks to its composition, copes with the task perfectly without injuring the plate.
• To do this, you need to wet part of the disk and place it on the plate. Then wrap it in airtight material: foil or cling film.
• Then wait the time indicated on the bottle and remove any remaining varnish with a stick. Do not forget to treat with a buff and oil substance.

Which side of the foil should you remove gel polish from?

The side of the foil doesn't really matter. The main task of this material is to create a greenhouse effect. Under such conditions, air does not get passage to the plate. The substances that make up the product used do their job.

After a certain time, the foil is removed and the gel polish can be easily removed using a stick or other metal device.

How to remove shellac with acetone without foil?

• Foil can be easily replaced with other available materials. These include adhesive plaster, cling film, specialized clothespins And hubcaps. The principle of working with them is the same as with foil. Their main task is to create favorable conditions for separating the chemical composition from the nail plate. Therefore, you can use any purchased material.
• Can be used vessel filled with acetone. A glass or metal container is suitable for this so that no reactions occur. Place your fingers inside for 15 minutes, after lubricating them with a rich cream for protection. If you skip this step, the dermis around the plate will be dry and flaky.

How to remove gel polish with clothespins?

• Clothespins are a professional new method for removing shellac. These devices allow manicure owners to take care of their hands without problems and constant costs. Also, the clothespins are designed for reusable use, which makes the work much easier.
• Working with them is easy and fast. There is no need to constantly envelop the phalanges with foil or film; just attach a clothespin to the finger covered with the disc and wait the required time. The advantage of this method is that, if necessary, you can see the readiness of the work by easily removing it from the phalanx.
• An alternative to clothespins is caps. The method of using them is no different from clothespins. The only difference is the method of putting it on. They need to be pulled, not pinched. You can purchase them in the same way as clothespins in a specialized department.

How to remove gel polish with alcohol?

The principle of action of alcohol is exactly the same as that of other products. The only thing you need to remember is that the process can take up to 30 minutes.

• To begin, moisten the discs and apply one at a time to the plates, enveloping them with air-tight material.
• Wait 20 minutes and begin removing the material in the order in which you applied it.
• Next, remove the remaining gel polish and treat with an oil mixture.

If necessary, increase the exposure time. It is not recommended to mechanically remove the applied layer to avoid damaging the plate's own layer.

How to remove shellac with a manicure machine at home?

Using a manicure machine, as well as other methods, will help you cope with the removal of gel. However, when using the device, you should take into account practical tips:

• Speed ​​is not always your friend- this procedure already reduces the time of removing varnish, so you need to carefully and painstakingly monitor its removal.
• Fixation is the best way— its integrity depends on the immobility of the hand from which the varnish is removed. The movement of the cutter is very, very fast, so you should be careful when bringing it to the surface.
• Excessive pressure- do not put pressure on the plate to speed up the process. Move carefully and smoothly so as not to damage your own nail plate.
• Movement only in direction- it is very important that the movement of your hand is in the direction of rotation of the cutter. The health of the plate depends on this feature.
• The feelings are right— focus on your feelings; if something bothers you, stop working immediately. If you feel a burning sensation or discomfort, this is a signal that indicates your technique is incorrect. Turn off the device and take a closer look at what you are doing wrong. If you can't, you can always contact a specialist.
• Summarize the work— after hardware work, the plates should be polished with a buff. And to improve health and improve the appearance of the plate, lubricate it with oil.

How to remove gel polish correctly and with what cutter?

The correct technique for working with a particular instrument is the key to beautiful and well-groomed hands. Therefore, when using a manicure device, it is important to be aware of the correct selection of tools.

• A cutter should be used specifically designed for removing gel polish. The most suitable ones are - carbide And ceramic. But many masters vote in favor of the latter. This is due to the fact that its effect on the plates is more gentle than option No. 1.
• In addition, it is necessary to operate the unit correctly. The direction should be smooth, soft and lightly touch the plate. The device itself should move in the direction in which the cutter rotates. This is exactly the kind of work that will be done easily, quickly and safely.

How to remove gel polish using a lamp?

• As you know, heat has a beneficial effect on removing gel polish from plates. If there are no problems with this in the warm season, then in the cold season it can be difficult to remove shellac. To do this, you can use a manicure lamp.
• It emits UV rays, which transfer heat to the surface of the plates and the process of removing the varnish layer will occur faster. Complete all the steps for removing shellac, place your fingers under the lamp for a few minutes and remove the residue with a stick.

How to remove gel polish with a file without damaging your nails?

• If you don’t have any of the above at hand, then you can get by with a regular file. Although this method is not very useful, it is quite effective.
• To do this, simply carefully polish the surface of the plates. Direct the file from side to side, or in the direction of nail growth. There is no need to make circular or diagonal movements. Dust must be removed periodically to ensure full visibility.
• If you still have the necessary materials, then file removal can be reduced by using it only on a glossy surface. And then, using the necessary materials, remove the gel polish in the traditional way.

How to remove gel polish from extended nails?

You can remove gel polish from extended nails in several ways:

• Remover;
• Alcohol solution;
• Vodka;
• Apparatus;
• Specialized liquid.

How to remove gel polish with acrylic powder?

• , used to design and strengthen the nail plate, is widely used in nail art. It is easy to apply and easy to remove. To do this, it is enough to file the surface of the nail plate so that its layer is removed.
• After filing, only a layer of gel varnish remains on the plate, which can be removed using any of the methods described above in the article. Use a file of medium hardness, guide it along the growth of the nail and do not put pressure on the plate when working.

How to remove single-phase gel polish?

• Single-phase gel polishes are notable for the fact that they are quite easy to remove and apply. The specialization of the varnish speaks for itself. After all, this kind of varnish does not require the use of a base and top coat. Its composition contains all the necessary substances, so it is applied to the plates independently.
• It is impossible not to mention that the density of the coating allows the nail plates to receive air and moisture, which has a positive effect on the overall health of the nails.
• Removing single-phase gel polish takes an average of 10 minutes. To do this, use any method with any of the above products, be it a professional liquid or alcohol. The allotted time is waited and the residual material is removed using a stick. Afterwards, an oil-based care product is applied.

How to remove gel polish on legs?

Removing gel polish on the nail plates located on the feet is no different from the procedure for removing polish on the hands. You just need to choose the appropriate method, which we described above, and apply it in your work.

Removing gel polish at home step by step: video

Nail art is a great way to make your hands well-groomed and healthy, highlight your individuality and lift your spirits. You can get well-groomed hands without resorting to salon services, but by solving the problem yourself.

Happy owners of beautiful, but extended nails often ask the question: “How to remove gel nails at home?” Some are interested in this in order to save money, some in order to save time, some in order to master this technique “for themselves”. There are simple rules that both craftsmen, self-taught people, and thrifty young ladies need to adhere to.

What to shoot with?

If you are wondering how to properly remove gel nails, then you should know that the procedure is performed exclusively by filing. This is the biggest disadvantage of gel extensions. Why the disadvantage? Because there is a risk of severely filing the nail if you act “on your own” and not according to instructions and technology.

File

Since the gel is a very durable material, it can only be cut with a hard file for artificial material. Experts recommend choosing an abrasiveness of 80/80 grit, but 100/100 will be enough for beginners. It is very important that the file in the hands of an inexperienced person does not turn into a threat to the health of the nails.

Manicure machine

A manicure machine with a nozzle rotation speed of 10,000 rpm is quite capable of removing gel coating from nails. The disadvantage of this method is the risk of injury due to lack of experience. If you have never dealt with a professional or semi-professional manicure machine before, then you should carefully read the instructions for the device and find out which attachment is intended for what. Before removing gel nails at home in this way, seek advice from the salesperson at the store where you purchased your model of machine, or from a nail technician at the salon. The latter often conduct master classes for free or at a very low price.

Removal stages

Before removing gel nails at home, you need to simplify your work as much as possible - remove the length. For this, a tool called a cutter, or clipper, is useful. These are clippers for artificial nails (nail clippers for animals are not suitable, although they look similar). Using a clipper, pinch off the free edge of the nail. The tool needs to be held at a slight angle to prevent the outcasts from flying too far. After this, the procedure for removing gel nails will go faster. You can save 15 to 45 minutes on the process.

Stage one: top layer

A gel nail consists of several layers: base, builder and finish. The first stage of cutting is removing the top coating, the finish, to be more precise. When performing the procedure with a nail file, it is very important to make all movements evenly and in one direction: from the cuticle to the edge. To avoid damaging the skin, it can be sealed with adhesive tape or adhesive tape. So, the cuticle and side ridges will remain intact, even if they are touched with a nail file. The top coating is removed with a 100/100 grit nail file. When performing the procedure with a manicure machine, you need to choose the right attachment (it is better if it is a disposable sandpaper), and also operate the machine correctly. The movements are similar to “sawing”: from the cuticle to the edge, without touching the skin.

Stage two: building layer

Extended gel nails, reviews of which are contradictory, have one peculiarity when removing: if you overdo it a little, there is a risk of causing irreparable damage to natural nails. Therefore, after the top layer is removed, you need to sweep away all the resulting dust with a brush and evaluate the uniformity of the work. If more material is removed somewhere, then the difference can be evened out using a hard buff for artificial nails. Only after this can you begin cutting down the building layer. Gel nails, unfortunately, cannot be dissolved with anything, which is why there are many negative reviews from their owners. The building layer is removed with a medium-hard nail file 150/180 grit. The movements are similar to the previous stage - from the cuticle. If you use a manicure machine, then the nozzle must be replaced with a softer one.

Stage three: substrate

Since the very first layer of gel is located directly on the natural plate, it must be removed with extreme care. The final health of your nails depends on how careful your actions are. You need to remove the backing with a soft file with an abrasiveness of 200/220 grit or a soft buff. It is designed for polishing natural nails; it cannot be used to saw through plates. If you are using a manicure machine, you will need a very soft nozzle in the form of a circle. She is responsible for polishing the surface of the nails. All movements are as neat and uniform as possible.

If the gel is not completely cut off

Sometimes it happens that, following the instructions, many notice that a thin strip of gel remains on the nails. What to do with it? Nothing. Over time, as natural nails grow, it will fall off on its own. If the gel begins to move away from the surface, creating inconvenience, it can be filed with a soft file or sanded with a buff. Under no circumstances should you tear off the material forcibly, either with orange sticks (photo of gel nails No. 5), or with a pusher, or with sharp objects. There is a risk of tearing off part of the natural epithelium along with the gel. This will make your nails thinner, begin to break, and their growth will slow down significantly.

Conclusion about renting a house

Of course, you can both extend your nails and remove them at home. But it is recommended that such complex procedures be performed by real masters in salons. How healthy your natural nails remain depends on the quality of workmanship. Many negative reviews about extensions are associated with the unprofessionalism of the professionals who perform the procedure. Before removing gel nails at home yourself, you should familiarize yourself with the consequences of poor-quality performance. Firstly, thinning of the nail plates due to improper removal of the material. Secondly, delamination of the surface and cracks on it. Thirdly, susceptibility to fungal diseases. All instruments must be sterilized!

How to remove gel nails safely at home?

• sterilize instruments;
• follow instructions;
• cut off strictly from the cuticle;
• restore nails after removing the material (baths, special products, masks).

The new generation of gel polishes are reluctant to dissolve with special liquids, and therefore many people have the desire to cut off the coating. Performing this procedure is not always pleasant due to the sensations transmitted by coarse abrasive files. In addition, you can injure the delicate skin near the cuticle or accidentally saw through the side roller. And files with finer abrasiveness can cause such friction that it becomes hot. And it will take a lot of time to remove the gel with such a tool. It is much more convenient to do this with a special cutter.

There is a special ceramic nozzle for the manicure machine, which ensures gentle removal of material and does not heat up. This is an expensive thing, its price ranges from 600 to 1000 rubles, depending on the manufacturer. But you will still need to buy additional equipment for it.

What is the name of the device that removes gel polish?

All manicure devices are divided into two large groups: professional and amateur. They differ in power: professional ones are powered from the mains and have a power of 45 W, amateur ones are powered by batteries and have a power of 18 W. At the same time, the rotation speed of the cutter can be the same and reach 25,000 revolutions per second.

While all professional models have standard attachments and a large selection for various operations, the same cannot be said about household appliances. You can only buy a new cutter to replace a broken one with a professional one. Unfortunately, for this reason they often stop using household manicure machines.

In a store, a gel polish remover can be called differently: cutter, milling cutter, machine, drill. The essence does not change from this. For productive and fast work, you need a power of at least 30 W, but 60 W is better. This will come in handy if you eventually want to do a hardware pedicure. A set of professional cutters must include a ceramic nozzle, a reverse function and a speed switch relay. A foot pedal will make the work much easier and free your hands.

To remove gel polish with a machine, only a special cutter is suitable. It must be made of ceramic, have corncob-shaped notches and be of high quality. When working with such a tool, heat transfer is minimized and the risk of burns is eliminated.

To avoid buying a fake, you can focus on the price: good cutters cost about 10-15 dollars. Many companies produce such attachments, but it is better to choose those that produce professional devices.

Safety instructions

Before removing gel polish with the device, you should read the instructions:

1. Before turning on the device, a visual inspection is carried out to ensure timely detection of damage. If they are present, the device cannot be turned on.
2. You should insert the nozzle all the way, only then turn on the device.
3. Periodically during operation, turn off the power and cool the device. Failure to comply with this requirement will result in overload and damage to the device.
4. If unusual vibration occurs, turn off the device and call a repair technician.
5. Do not operate the device in high humidity or with wet hands.
6. Avoid heating the electrical wire from a radiator or direct sunlight.
7. Contact of the device with chemical compounds should be avoided.

During operation, you have to change attachments. This should be done with the power off.

Rules for working with the device

When operating the device, certain rules must be followed to avoid injury. You need to familiarize yourself with them before removing gel polish with the device:

1. The rotation speed is set on the control panel. To do this, use the regulator, smoothly switching it.
2. During operation, the rotation of the cutter is controlled by a pedal. By pressing it all the way, the speed set on the relay is achieved. To reduce it, you can ease the pressure on the pedal or switch the relay.
3. The direction of rotation should be changed in three stages:

• Take your foot off the pedal.
• Wait until the rotation stops completely.
• Switch direction of rotation.

During operation, the rods of the nozzles may become damaged (rust, dirt). Continued use of them leads to wear of the motor bearings.

The device should be stored with the rod inserted and should not be turned on without the attachment.

Instructions for removing gel polish

Before removing gel polish with the device, check its condition, set it to low speed, connect the pedal and insert the ceramic nozzle into the clamp. The working elbow should lie on the table - this will prevent overexertion of the arm and, as a result, careless erroneous movements.

• Work begins from right to left from one finger to the other. The cutter should not be turned too far to reach awkward places. Turn your finger.
• They work with the middle part of the cutter, making movements from top to bottom. The direction of rotation at this moment should coincide with the movement of the hand.
• They don't stop at one point on the nail; the cutter moves all the time. No effort should be made.
• Having removed the material from the center of the nail, move on to the side parts. They bend the roller and remove the coating, slightly tilting the cutter so that it works with the upper part - there are finer notches there.

The video shows how to properly remove gel polish with the device. If operations are always performed in the same sequence, there is less chance of injury to both the technician and his client.

Experienced craftsmen point out the intricacies of the process. Of course, to learn how to work quickly and efficiently, it is not enough to simply understand how to remove gel polish with a machine. It takes practice. Here are some tips to help beginners:

1. To avoid overheating of the nail plate, perform stroking movements with a cutter. It either approaches the nail or moves away from it.
2. If any area overheats, you should move to another nail, and then return to the first.
3. Movements of the hand with the device running should only be in the direction of rotation, otherwise the cutter will come off the nail and may cause injury.
4. The cutters are similar, and it is easy for a beginner to confuse them. Keep the ceramic bur separately.
5. Daily cleaning of the device with a brush and wiping with a soft cloth will maintain its functionality.

Disinfection and sterilization

A gel polish remover can become a breeding ground for infections if sterilization is neglected. Salons use glasperlene sterilizers or dry-heat ovens. At home, you can use the method of soaking the removable parts of the device in a disinfectant solution, which can be purchased at a specialized medical store. Instructions and exposure time are indicated on the packaging.

The instrument, cleaned and rinsed under running water, is wiped and placed in a craft bag. Then preheat the oven to 180 degrees and place the craft bag in it for fifteen minutes. Store the instrument without removing it. It remains sterile for thirty days.

How to avoid damaging your nails

Many people are concerned about the question: how to remove gel polish from nails with a device and not damage them? While the cutter is working, the gel polish is removed from the nail layer by layer. First, the top coat is removed, then the color layer, leaving the base coat. In some cases it is also removed, but this happens extremely rarely.

The artist focuses on the base coat, which usually has a slightly matte, transparent appearance. This layer signals that it is time to stop removing material. If you still need to remove it from the nails, this can be done with a file and a buff, or, if the material is soluble, using an acetone-containing liquid.

The most dangerous place where marks from a cutter can remain is the cuticle area. The nail here is weaker, and even one careless movement can leave a mark, which will then take a long time to grow back. Therefore, some people prefer to work near the cuticle with the upper part of the cutter, where the cuts are very small.

Where to start for a home handyman

When purchasing a kit for applying gel polish, you should also purchase a device for removing it. Often the cost of the device and the cutters for it exceeds all other materials and equipment. But it is important to remember: the purchase is made once, and it is very difficult to do without the device.

There are professional courses that introduce the basics of operating the device. At major exhibitions dedicated to beauty salons, famous professionals provide free consultations. It is better to acquire knowledge before starting work. This applies to operation of the device, coating and various designs.

Then for a beginner there will be no difficulties with how to remove gel polish with a machine at home.

Some gel polishes begin to bend around the cuticle after just a few days. Usually the problem is either in the varnish itself, or in the fact that the nail technician did not degrease the nails enough. You want to tear off this shiny record, but you can’t. The gel penetrates into all irregularities, so by peeling it off, you can turn a small scratch into a full-fledged crack. And this applies not only to the tip of the nail.

Take it from the person who ignored this advice: a crack at the base of the nail is a very unpleasant thing. It's painful, very unsightly and simply unhealthy. And a healthy nail takes forever to grow.

As much as you might like, don't peel off the polish.

The exception is the gel that is not completely dried. Peel it off calmly and wash off the residue with acetone. How can you tell if the varnish is under-dried? It's simple: your nails smell unpleasant, they stick to everything, and your polish smudges.

Once completed, apply pressure to each nail with the pad of your finger and move it slightly to the sides. Don't be afraid to ruin something: if the varnish is dried correctly, nothing bad will happen. If something is done wrong, it will not dry without a lamp. The top layer may be hard, but the colored one is half-baked. This type of coating will not last long.

If you encounter this, feel free to file a complaint with the master. Either he was too lazy to apply several thin layers instead of one thick one, or he didn’t spend enough time drying, or he used a low-quality lamp. In any case, you need to get rid of this as soon as possible, because the varnish can get into your food or stain your clothes.

A simple and inexpensive way for those who don’t want to run to the store for special devices. But it also has a downside: acetone dries out your nails.

Hochu.ua

You will need

• cotton pads;
• nail polish remover with acetone;
• nail file;
• cream or Vaseline;
• foil.

How to remove gel polish

Cut blanks from cotton pads that follow the shape of your nails so that the acetone has less contact with the skin.

File off as much of the varnish as possible with a nail file. This will make it easier for acetone to penetrate the gel, and the duration of the procedure will be reduced.

To protect the skin around the nail from acetone, lubricate it with Vaseline or rich baby cream.

Soak cotton pads well with nail polish remover (you can use it without acetone, but the effect will be worse), apply them to your nails and wrap them with foil on top - this way the active substance will not evaporate.

Well, now the most boring part. Wait 15-20 minutes, occasionally massaging your fingertips to speed up the process.

When the time is up, simply pull the foil and cotton wool off your fingers - the varnish should come off along with them. If that doesn't help, try gently picking up the gel with an orange stick. If it doesn't work, repeat the process.

You can see how to remove gel polish correctly in this video.

A more reliable, faster and gentler method for nails and skin than soaking with acetone. But you will have to acquire a special device and experience in handling it.

You will need

• nail polish remover or several files of different hardness.

Gel polish removers resemble small drills or grinders. On AliExpress you can buy both expensive professional models and simpler ones. For home use, a cheap device is enough: you are unlikely to remove the gel every two days.

Typically, the device comes with several attachments: from harder ceramic or metal ones to those similar to thick cotton wool. Hard attachments should be used to remove the main part of the gel, and soft ones should be used to work near the cuticle, remove polish residues and polish the nail.

Before removing the polish, practice on something you don't mind ruining: false nails or a piece of plastic. This way you will understand at what angle it is more convenient to work.

When you are confident in your abilities, move on to your own nails. All you need to do is gradually file off the gel from each nail, layer by layer. Move as smoothly as possible, keeping your elbows on the table so that your hand does not shake. Do not press on the nail to avoid damaging it. Just gently stroke it with the rotating nozzle until the polish comes off. And then switch to a softer nozzle.

You can also use nail files, but it will take longer and you will have to work harder to get the areas near the cuticles. Plus there is a risk of severely rubbing the skin.

How to remove gel polish with special wipes

Such wipes can be easily found on AliExpress or in cosmetic stores, and then carried with you and used, including for removing regular nail polish. However, gel polish is not always removed on the first try and there is a risk of drying out your nails.

You will need

• nail wipes;
• cream or Vaseline;
• orange stick;
• nail file

Each package contains several individual bags, each of which contains a lint-free wipe soaked in acetone. The inside of the bag is made of a material resembling regular foil.

File off the top layer of gel with a nail file. Treat the skin around your nails with a rich cream. Cut off one edge of the bag, take out a napkin and wrap it around your nail. Now put the bag on your finger and gently press it so that it does not fly off.

Wait 15 minutes and check if the varnish is removed. If it is in place, try to gently pick it up with an orange stick. Repeat the procedure if necessary. Just add nail polish remover to the already used bag and put it on your finger again.

What to do after removing gel polish

After removing the gel polish, your nails can look simply terrible, because there is a high chance of drying them out. Don't be alarmed, just apply a special nail oil to your nails and cuticles. You can find this in any cosmetic store.

If you don’t have it on hand, the usual one will do. The effect will not be so noticeable, but a couple of repetitions - and your nails will be almost as good as new.

And be sure to give your nails a day or two to rest from polish. If the thought of this seems blasphemous, use a clear caring varnish from the pharmacy.

Use oil

The less oil in the nails, the longer the gel lasts. Therefore, before applying varnish, nails are treated with a special drying agent. If you skip this step or do something more radical and apply oil to your nails half an hour before the manicure, the gel will be removed much faster and easier. True, a manicure can go bad at the most inopportune moment.

Use a special database

It will be even easier to remove gel polish if you treat your nails with Peel Off Base Coat (translated into Russian as a peeling base layer) before applying it. The base will protect your nails and eliminate the smell of acetone. But the gel will last less: after two or three days the varnish will begin to break off in large pieces. Especially after a hot shower.

Apply a coat of base and wait until it dries completely. Usually the base will become transparent when it dries, but it is better to check the instructions on the package. Now you can apply gel polish.

To get rid of the colored coating, it will be enough to pick it up with an orange stick. Depending on the quality of the base, the gel will be removed either entirely or in large pieces.

Some people use PVA as an alternative. But the glue is removed only in pieces, takes a long time to dry, and also tends to roll up into droplets on your finger. You can get rid of this effect by diluting the glue with water and applying it using an old varnish brush.

In the modern world, more and more girls strive to create their ideal, unique image, and manicure is an important component of it. Coating with gel polish, (shellac), nail extensions - all this is no longer a luxury, but has become firmly established in everyday life. In addition, you can make your nails beautiful not only in expensive salons, but also at home. However, many people know how to cover their nails with gel polish, but the question of how to remove gel polish at home correctly and without harm remains relevant to this day.

In this article we will tell you how and how to remove gel polish without the help of a specialist, at home, as carefully as possible, preserving the beauty and health of your nails.

In order to remove gel polish you will need: a small container, cotton wool or cosmetic cotton pads, an orange stick, a nail polish remover containing acetone (or a special gel polish remover (remover)), food foil, a nail file.

Methods for removing gel polish

Traditionally, to remove gel polish, it is customary to use a special product (remover), but most often it is not at hand at the right time, in such cases it can be replaced with more accessible means at hand. The most common ways to remove gel polish:

1. regular nail polish remover;
2. soaking nails in a bath of nail polish remover;
3. using a cutter or saw.

Method No. 1 Removing gel polish using nail polish remover and foil

You can properly remove gel polish using regular nail polish remover, which contains acetone; for this you need:

Method No. 2 Removing gel polish using an “acetone bath”

For this method of removing gel polish, you will need a small bowl and acetone-containing nail polish remover.

Before the procedure you should also:

1. cut off the top (shiny) layer of the coating;
2. treat the skin around your fingers with cosmetic oil or rich cream;
3. fill the bowl with nail polish remover, then dip your fingers in the container for about 10-15 minutes;
4. After the coating peels off, remove it using an orange stick.

At the end of the procedure, you should thoroughly wash your hands with warm water and soap and lubricate them with a rich cream to moisturize the skin after exposure to acetone.

It is recommended to remove the gel polish first from the nails of one hand, then from the other, and also remove the foil with the cosmetic disc from each finger in turn, this will help to avoid hardening of the coating and the gel polish will be removed much easier!

In addition, temperature plays an important role in the procedure for removing gel polish; the warmer it is, the better the gel polish is removed. In summer such questions usually do not arise, but in winter they do very often. Therefore, girls who have such a feature as constantly cold hands need to warm their hands by any possible means before the procedure, then the gel polish will be removed easily, without much harm to the nails.

Important! It should be noted that this method is very harmful to your hands and we do not recommend resorting to it.

Removing gel polish from extended nails

These two methods are only suitable if your “native” nails are covered with gel polish. But many girls often have a question about how to remove gel polish from artificial (extended) nails.

Unfortunately, methods using acetone-containing products are not suitable in this case, since they can severely damage the nail, and using products without acetone is useless. In this case, it is best to resort to the help of a cutter or file.

Before the procedure, you must thoroughly disinfect your hands, push back the cuticle, and then begin filing.

Method No. 3 Removing gel polish from extended nails using a cutter or file

The fastest and highest quality way to remove gel polish from extended nails without using a special liquid is to use a cutter, however, this method requires experience, which can be acquired by practicing on tips.

Ideally, it is better to use a cutter with a ceramic coating, which easily and “painlessly” removes the gel, but it is quite expensive; a carbide cutter is quite suitable for extended nails.

We choose a cutter that is solid and has a convenient shape (cylinder, cone, etc.)!

Depending on your ability to use the device, we select the rotation speed, but it should not be less than 1000 revolutions.

Before starting the procedure, you need to push back the cuticle as much as possible, turn on the desktop vacuum cleaner and you can get to work:

Don't be afraid to file your nail through carelessness. Multi-layers of acrylic and varnish will protect the native nail plate from damage, and any “errors” can be easily corrected with further correction.

If the time for correction has not yet come, but a chip has formed on the nail, you can resort to using a nail file.

When choosing a file for cutting, you need to take into account its shape.

High grit files (900/1200 grit) are only suitable for polishing the nail, so a low grit file (100/180 grit) is best for filing off gel polish.

1. We start filing from the cuticle, from bottom to top, with careful, confident movements;
2. file off the gel polish strictly in one direction, avoiding chaotic movements, also avoid contact with the skin;
3. if at the end of the cut no correction is required, but a manicure will follow, then there is no need to cut off the base;
4. At the end of the procedure, shake off the dust from the nails, polish the nail with a soft buff and proceed to the classic scheme of applying gel polish.

What liquids are best to use to remove gel polish?

When choosing liquids for removing gel polish, you need to be guided by what manufacturer’s varnishes you use, what funds you have, and how much time you are willing to spend on the procedure for removing gel polish.

Many manufacturers produce liquids with a gentle composition, for example:

• Match- reasonable price-quality ratio, slightly dries the nail plate. Manufacturer - USA, in 100 ml bottles;
• CND Shellac Power Polish Nourishing- high price, minimal exposure time, practically non-toxic. Manufacturer - Great Britain, bottled in 236 ml bottles;
• "Severina"— dissolves any gel polish well, long lasting effect. Manufacturer: Russia. The volume of bottles ranges from 50 to 1000 ml depending on the composition and purpose of use;
• Yoko- contains a large amount of useful substances, can be easily removed with a napkin, very difficult to get anywhere. Produced in America in bottles of 120 and 200 ml.
• Perfect- easy to use, worth its high price. Manufacturer: Korea. Available in 148 ml plastic bottles;

“Interesting” and convenient devices for removing gel polish

In our article, we talked about the fact that you can remove gel polish using food foil, which acts as a retainer for the cotton pad on the nail. Foil is a handy tool that is found in almost every home. However, the nail service industry has long come up with special interesting devices designed to significantly facilitate the procedure for removing gel polish, and here are some of them:

So, to summarize, let’s highlight several advantages of the above-mentioned devices:

• not a high price;
• durability of use;
• They do not harm the nails at all.

What not to do when removing gel polish from nails

A beautiful manicure and well-groomed nails are what every girl strives for. But, unfortunately, each manicure made using gel polish coating has its own “lifetime”. Our own nails grow back, and it’s time to make corrections by removing the old gel polish. Often there is not enough time to remove gel polish using “traditional” methods, and girls begin to make serious mistakes, after which there is no need to talk about the beauty and health of their nails.

• Under no circumstances should you peel off or pick out the gel polish. Using this method, you will cause enormous damage to your nail plate, after which your nails will become thin, break and peel more often, in addition, weakened and damaged nails are most vulnerable to nail fungus.
• Also, a serious mistake is to remove the entire coating with a file. You can only file off the gel polish down to the base layer, otherwise you risk severely damaging the nail, which will lead to not very pleasant consequences, which will not be easy to eliminate.

How to care for your nails after removing gel polish

As everyone knows, using gel polish is currently the most popular way to give your nails a beautiful and well-groomed look. However, long-term use of gel polish leads to our own nails weakening, becoming brittle and often peeling, so they need time to recover and, of course, careful care.

There are many ways to restore your nails after using gel polish at home. We will tell you about the most popular of them:

• Take strengthening warm baths. Add a little sea salt, chamomile (can be purchased at a pharmacy), a drop of olive oil to warm water, and dip your fingers in the mixture for about 15-20 minutes. It is best to use such baths 2-3 times a week;
• Use vitamin E (sold in capsules in pharmacies). Crush 1 capsule, rub into the nail and cuticle, you need to do the procedure every day before going to bed.
• Rub olive oil into the nails and cuticles, similar to vitamin E.

In addition, you can use professional care products:

• Special oil. It softens and moisturizes the cuticle and nail plate. This product is easy to carry in your purse. Can be used three times a day. Moreover, you can apply this oil even if your nails are painted with regular colored varnish.
• A special liquid absorbent product also restores the nail well. This liquid is only suitable if you are willing to temporarily abandon any varnish coating, since it is easily lubricated. You can also use it throughout the day (2-3 times a day). After application, you must wait until the product is absorbed and dries.
• Special therapeutic varnishes and coatings. There is an opinion that it is better not to use them, since they contain a varnish base, and therefore have no benefit. However, such varnishes and coatings significantly strengthen the nail, which helps to avoid their brittleness; in addition, they perfectly protect the nail from exposure to water and various household chemicals.

When restoring your nails after using gel polish, try not to use various varnish coatings for a while (with the exception of medicinal ones). It is recommended to use both natural products (oils and baths) and professional ones at the same time. In this case, your nails will quickly regain their original beautiful appearance and health.

Dear girls! A beautiful manicure is an important component of your ideal look. Therefore, in order to prolong this beauty as much as possible, you need to take good care of the health of your nails. Don't make blunders that could seriously upset you later. Follow a number of simple rules that we described in the article, and then your marigolds will delight you with their beauty and health for a long time.