Airplanes flying models made of paper. How to make a paper airplane? From A4 sheet

Paper crafts are a favorite pastime not only for children, but also for adults. The very first thing parents teach their children to do is an airplane. A simple but very interesting toy. Everyone is probably familiar with the classic scheme. But in fact, there are a great many options for paper airplanes. We offer you several original diagrams on how to make an airplane out of paper. With their help, you can easily diversify your children’s leisure time, and you yourself will have fun.

A paper airplane is a classic origami design. If you are new to this technique, then start with simple models. When you get used to the paper, “feel” it, and your planes acquire excellent smoothness and flightability, then move on to complex models. Before any craft, prepare yourself a few sheets of paper so that you can always start over if something goes wrong. Never use wrinkled sheets, otherwise the aircraft will not have the required characteristics. When making the diagram, make sure that all bends are symmetrical. Also, do not forget to wash your hands thoroughly before the procedure, because dirty stains easily remain on the paper. Make several models at home and go outside with your child to launch them. This will bring you a lot of positive emotions.

Simple paper airplane

We all know the classic design of a paper airplane since kindergarten. But, if you forgot or haven’t practiced for a long time, we will remind you of it. A simple airplane can be made in two ways.

Method number 1:

• Take a rectangular sheet of paper, a landscape one will do just fine;
• Fold it in half, then unfold it again, so you get a straight center line;
• Fold the upper left corner to the center line, do the same with the right;
• Bend the resulting upper corner down;
• Then align the vertices again as shown in the diagram;
• Bend the resulting corner upward, it will secure the upper corners;
• Fold the resulting model in half;
• Bend the wings in the opposite direction, they will straighten and the plane will be ready to fly.

Method number 2:

• Fold a rectangular sheet of paper in half lengthwise;
• Unfold and fold the top corners toward the center line;
• Fold the resulting outer corners again to the center line;
• Fold the shape in half and make wing folds in the center. The second simple paper airplane is ready.

Fast paper plane

Many boys want to know how to make a fast airplane out of paper. This model should have a tail folded according to a special pattern. And the nose should be thin and sharp. Then the plane will fly faster.

• Bend the sheet lengthwise, then unfold it;
• Fold in half, fold both edges from the middle down, and then bend their halves back;
• Unfold the sides located on the sides and bend each flap inward - this should be done with the inner flaps, then with the outer ones;
• Bend a small part of the wings so that they look back, then bend the wings from the bottom a few centimeters;
• Secure the fold line by drawing a rigid finger or ruler along it, straighten the wings;
• The resulting bends must be bent parallel to the folds of the wings.

Cool Glider

A glider is a very cool airplane, which is very difficult to make from paper, but quite possible. A little patience and you will have an original paper airplane.

• Fold the paper in half and unfold it again;
• Place the sheet with the fold up, fold the corners inward - you will get a mark in the middle of the sheet;
• Make a fold in the center of the sheet - you will get a sharp nose of the plane;
• The nose must be folded so that it protrudes 2-3 mm beyond the edges of the corner bends;
• Then the paper is folded in the center so that the back side is inside;
• The wings should be bent - experiment with their width, achieving the optimal result.

War Hawk

The Hawk is a famous military aircraft. Aviation enthusiasts will be happy to add it to their paper collection. If you don’t know how to make such an airplane out of paper, we offer our diagram:

• Fold the rectangular sheet in half, then unfold it again;
• Fold the side corners to the center line;
• Fold the top corner with its end towards the bottom line of the sheet;
• Return the corner, fold it back, but with a slight bend;
• Fold the model in half;
• Fold the wings down;
• Unfold the wings and make additional folds at the edges.
  [photo5]

Far flying fighter plane

The fighter plane model is one of the best. It flies well and is quite strong in its structure. It's a pleasure to play with such a plane. Step-by-step diagram for a long-flying fighter plane:

• Take an A4 sheet, preferably a thinner one, this will allow it to fly a little further;
• Fold it lengthwise, then unfold it back;
• Turn the fold up and fold in half along the short side;
• Fold the resulting upper corners overlapping so that the diagonal goes from the center of the top line to its corner in the bottom line;
• Then the upper corners are folded in half again so that their outer edge runs along the diagonal line; be sure to carefully iron all the folds with a ruler;
• Open each side like a bud and bend in half;
• Then, the resulting angles are turned back;
• After this, the upper parts on both sides are folded inward into the aircraft;
• The craft should be turned over and the same procedure done on the other side;
• Both parts need to be opened along the fold line;
• On the other hand, it is necessary to similarly open the extreme parts, you should get an isosceles triangle;
• The resulting figure should be folded in half;
• You need to step back 2.5 cm from the bottom line and mark a line along which the wings will bend;
• Carefully bend first one wing, then the other, do not forget to carefully iron all the lines;
• The final touch is to bend the wings for stability. To do this, approximately in the middle of the resulting plane, you should mark a line parallel to the base;
• Fold the corners up along this line;
• If desired, you can additionally make flaps. The plane is ready.

Spy plane

If you have already gotten your hands on simple diagrams, you can move on to the question of creating a paper airplane of a more complex design. We offer you a beautiful and original reconnaissance aircraft:

• Fold a rectangular sheet of paper as if you were going to make a square out of it;
• Then roll the sheet in the same way on the other side;
• You will get a triangle, bend its upper corner to the bottom line;
• Then turn the corner back, but with a slight bend;
• Fold the resulting figure in half;
• Mark a diagonal line and unfold the wings along it, do not forget to thoroughly iron all the folds. The model is ready to fly.

Liner

Another diagram with which you can make an unusual airplane out of paper. The airliner has an original shape, as well as excellent flying properties. With such a model, all the boys in the yard will simply be jealous. So, the liner diagram:

• As in the reconnaissance aircraft diagram, at the first stage the rectangular sheet should be folded as if you were going to make a square out of it;
• Fold the resulting upper triangle in half;
• Bend the upper corner so that it protrudes slightly beyond the bottom line of the triangle;
• Fold the shape in half, leaving the fold of the triangle inside;
• Next, make an indent from the central fold and bend the wings along it. There will be a small membrane inside the plane;
• The triangle that was bent at first will need to be straightened;
• The upper parts of the wings need to be slightly bent towards the outside of the aircraft;
• Spread the wings and bend the corners as shown in the diagram;
• Decorate the plane with messages and cutouts.

We have described for you 7 different diagrams that easily show you how to make a paper airplane. Each model has its own individual launch and landing characteristics. Make several airplanes you like, experiment with the width of the wings and flaps. This way you will find the most suitable model for your purposes. Or you and your child can create an entire collection; this will be a great alternative to the time your child spends in front of the computer.

Good afternoon

Today we’ll talk to you about origami. Now it’s summer and the kids are asking their older brothers, sisters and parents to make paper figures for them. And if you don’t know how to make them, then don’t despair. In this publication we will show you interesting ideas and schemes. Yes, yes, there are a lot of schemes, so sit down more comfortably, be patient and let’s create Aeroflot together!😁

Of course, our topic today is not just about paper crafts, but we will specifically talk to you about airplanes. Since there are a lot of ideas, and there is an incredible amount of information on the Internet, which we have collected for you in our review. Origami is also a good way to develop hand motor skills, so be sure to involve all your household members in the process, from the smallest to the largest.

Look how beautiful the picture looks, you can feel magic, childhood, and happiness in it. But the time spent together is simply priceless for adults and children. Now you and I will make so many things that we can then organize an exhibition!

So, let's move on to the creative and exciting process of creating flying machines. And of course, the first one will be the simplest template for creativity.

How to make a paper airplane with your own hands

Let's move on from words to action, which we promised, let's start with the simplest template. Anyone can make products, even those who have no idea how to do it. Everything comes with desire and experience. I recommend taking a white background, since then you can color your original product beautifully and creatively. My job is to suggest, and your job is to start crafting.

We need the following supplies for our work:

• A4 paper of any color;
• manual dexterity and alertness;
• The main thing is patience.

Let’s take a sheet of paper and 4 put it in front of us and begin to cast a spell on the child’s toy.😁 Fold the sheet in half in order to see exactly the center of the sheet.

Then we unfold it and bend the sides to the fold line so that we get two identical triangles.

Our next steps are to wrap our triangle as shown in the photo below, and work out all the fold lines with our fingers.

Now we bend the small triangle up.

Take the product and fold it in half. We are working on all the lines.

We bend the wings on both sides. You should end up with a paper product like this.

We spread the wings and the paper toy is ready for the first pallet. As you can see, this is the simplest and most straightforward way to make an airplane. You can make a lot of them and arrange a competition to see whose will fly the furthest. We also offer you other schemes. This model doesn’t fly very well, and most likely he won’t be in the forefront at all. If you are organizing a competition with your neighbors, then the following template is just for you.

A paper plane that flies high up to 100 meters

So, let's make a paper airplane with you that flies far, smoothly and beautifully. Making such a product will also be easy and simple. You can win a competition with him if you arrange them with other kids. So I advise you to take a piece of paper and start tinkering.

All we need is:

• A4 sheet of paper

Let's take a sheet of any color that suits you best; using the example, we will make a toy from yellow.

We place the sheet in front of us and fold it in half exactly the same way as in our photo. As you may have guessed, we will be making crafts using the origami technique.

Then repeat the action again and you should get something like this:

Then we fold the paper where the lines intersect. Look at the photo below. We press well with our fingers so that the line is visible.

Fold the paper along the first top lines. It will look something like this:

And now we bend the resulting corner and place it exactly in the center of the line.

Turn the product over to the reverse side and fold it along a horizontal line.

Again we turn the product over to the other side and place it as in the picture below.

We begin to bend the top along the center line; when we bend, our product will fold, so we must press the paper with our fingers carefully.

We do this on both sides and we will get such beauty, but that’s not all.

Then we fold the two parts in half and we already see that our product is almost ready, just a little bit remains.

Now we bend the wings.

And on the wings we also make small folds.

The final touch and you're done. We open the craft, straighten everything and voila! It turned out beautiful.

The second craft is, of course, harder to make, but this toy flies much faster than the first. Below we will look at another craft that can fly even higher and further. If there is something you don’t understand, then ask in the comments or just follow the pictures. Let's move on to the next paper product.

Paper airplane diagrams

You can't even imagine how many types of airplanes you can make. In this article we will show you diagrams and templates that you can save and print. On the Internet we found just a huge number of examples of how to create such paper crafts. So we’re not only organizing a competition to see who can fly the highest and longest, but we’re also organizing an exhibition on the model. Like this!

So, we won’t describe it in detail, because we have collected for you detailed and step-by-step pictures of how to do everything in order. The first template is the easiest and we described this creative process in detail above, since it is the most popular.

The next version of the step-by-step template.

All products are made using the origami technique, some are very simple, while others are much more complex.

Of course, the trajectory and duration of the pallet depends on many factors, but if you do everything exactly according to the instructions, then success is guaranteed.

Let's look at another flying machine template.

We make products without scissors and glue, and this greatly simplifies the creative process. Look, how do you like this model?

Just look at how many models can be made from paper, just using a template. To be honest I'm shocked! I can only make a standard product and that’s it. But now I’ll definitely try everything! Oh, my guys will be happy.

With these templates and your help, the child will be able to make his own favorite model of a flying toy.

The more complex the model, the more interesting the creative process. The child develops thinking, creativity, and hand motor skills. You can see how many useful points this work has.

We hope that you liked the model templates and you will choose the one you like best. Or maybe you want to make all the models and paint them beautifully, then you will have a large selection of products to play with. Let's move on to another craft template.

How to make a paper airplane that flies 10,000 meters easily and high

And now we will make a paper airplane that flies 10,000 meters and can overcome airspace. Oh, how beautifully it is said, and that childhood is a magical world in which dreams come true. The game develops the child’s thinking; in the game he learns about different situations. Therefore, make different flying models and play with your children. A joint business always brings children and parents closer together.

For the craft we will need paper and our template. Let's get creative.

Take the paper and place it in front of you, then fold it horizontally along the floors.

We unfold and do exactly the same, but now on the other side. Make sure that all cuts are even and that the fold lines are not wrinkled.

Now we unfold the triangle again and carefully fold the corner to the line we just made.

Together with this corner we bend the triangle.

We do exactly the same procedure on the other side of the product. This is what it will look like when expanded.

Then fold the sides to the line in the center.

And bend the triangle in half.

We bend the side triangles along the lines we have already made towards the center.

We bend the tongue up, thereby holding the two sides together.

And we bend small corners of this tongue on both sides towards the center.

Take the product and fold it in half and make wings.

We unfold it and the model is almost ready.

We make the final touches and our product can fly to freedom. We bend small strips upward along the edges of the wings.

Debts fly and such a model flies high. By the way, she looks very pretty. If something is not clear from the description, be sure to look at the pictures. They will help you make everything right.

DIY paper airplane model step by step instructions with photos

Now let's look at the diagrams of a paper airplane, based on pictures. Since we are probably not very good at talking in detail about creativity. Then look at the pictures, your ingenuity will definitely help. The pictures will be clear and understandable.

Fold the sheet in half.

Then, as in the picture, we bend the corners along the lines. And we get the shape of a triangle.

The rest of the steps are quite simple.

We have found a template for you on how to make a flying toy using the picture. Simpler models were also provided. But since not everything is in order with the description, we found a video for you on the Internet that will be interesting to you.

Video on how to make a paper airplane

Watch the video and make such beauty that you can’t take your eyes off it. The origami technique is amazing!

How to properly make (fold) an origami airplane from A4 paper

We probably won’t surprise you with anything, since a lot of models for creativity were presented to your attention. We will now try to tell you how to fold the products correctly so that they fly easily and high. We use the origami technique, although all the crafts are related to paper and are precisely made using this technique.

Take an A4 sheet of paper, fold it in half, then unfold it and bend the corners towards the fold line in the center.

The photo clearly shows how everything needs to be done. Carefully open the sides of the triangles, and then bend them inward. It looks something like this:

Bend the top part outward. And then we bend the corners to the fold line.

Everything seems to be working out correctly so far. We open the formed parts strictly along the contour.

Once we complete the whole procedure, we should get something like the picture below.

We bend our product in half.

We fold the wings and iron the fold lines well. Next, draw lines on both sides of the wings as in the photo.

Bend along the drawn lines.

As a result, we should get such a gorgeous paper airplane. If everything is done correctly, then it will fly long and far.

With such a beautiful craft, we conclude our review. As you can see, there are a lot of models and if you want, you will find an incredible amount of templates and diagrams. We tried to find the most popular and popular models on the Internet for you. Be patient and make a mountain of such crafts. Children will be happy with this activity.

It is very easy to find a topic that interests you on the site. We have everything divided into categories.

Thank you for being with us! Come to our website and find useful ideas for creativity. Good inspiration to you and see you again!

Folding a simple airplane out of paper takes 5 minutes. Models of complex design require more experience and a sufficient amount of free time. Having assembly diagrams makes the process much faster and easier.

What paper and materials will you need?

To fold a paper airplane, all you need is paper. The most common stationery paper, A4 format, is suitable. For large models that are planned to be launched outdoors, you can take an A3 sheet. It is not advisable to take a larger size, since launching and planning such an aircraft is problematic.

Paper thickness depends on the aircraft. For light, floating models, classic printer paper or newspaper is suitable. For rigid, gliding aircraft, paper with a density higher than 100 g/m 2 is typical.

Due to the hardness of the material, it is possible to achieve the necessary flight characteristics.

In addition to paper, in rare cases, scissors or glue are additionally used to better secure the model. Beginners can use a long ruler; it helps avoid crooked and asymmetrical bends. If desired, the finished model can be painted in different colors or covered with stickers.

Classic paper airplane model

The classic version of the airplane model consists of 6 steps:

The model is universal and suitable for launching by both children and adults. This is due to the average flight characteristics – sufficient for moral satisfaction.

Fighter jet

It takes longer to make a fighter jet.

This involves a lot of action during the folding process, but the work itself is not difficult at all:

A fighter jet is capable of flying fast and far when launched correctly. You need to throw the plane hard and at a slight angle of up to 50 degrees to the ground.

Military paper plane

Such a fighter flies smoothly and smoothly. To complete it, you need a landscape sheet and a few free minutes.

Performance:

1. Fold the sheet in half lengthwise to determine the central axis.
2. Bend the upper corners close to the axial fold.
3. Turn the sheet over and fold the corners back toward the center line. The result is a narrow and long “nose” of the aircraft.
4. Straighten the folded top layer of paper from the back side to form a diamond consisting of 2 halves. Fold it in half. Thus, from a rhombus a triangle is obtained with the base at the top.
5. Fold the workpiece in half with the folded layers facing out. Bend the wings at a distance of 2-3 cm from the axial fold.

The plane folds up quickly enough, the diagram is clear even to a child. It is better to take paper that is not very thick, since the nose of the model is already weighted. In flight, a military aircraft is characterized by smooth and long gliding with a smooth descent.

Paper airplane with propeller

To make an airplane with a propeller, you will need an A4 sheet and a paper square measuring 10x10 cm (for the propeller). The square is cut diagonally, not reaching the center 1 cm from each corner. Secure every second corner obtained with a needle in the center. The resulting propeller is finally attached to the nose of the aircraft.

The paper plane is folded according to the following pattern:

Children will like the plane because it is not like other models.

When launching, special skill is required, otherwise it will not fly. For reliability, the propeller can be glued with superglue after fixing; it is important not to get on the propeller itself, otherwise it will stop rotating.

How to make an unusual plane

Any model that does not look like a classic airplane looks extraordinary and attractive.

This original aircraft resembles a passenger airliner, the assembly diagram is as follows:

1. You need to make a square from a landscape sheet by cutting off the excess width.
2. Press two diagonal folds onto the sheet. Fold in half to form a triangle.
3. Fold the sharp corners towards the center to form a rectangle, then fold in half along the fold. You should end up with a right triangle with a folded base at the bottom and 3 independent corners at the top.
4. The two outermost free corners are the wings. They must be bent at a distance of 3 cm from the base of the plane.
5. A tail is formed from the central corner. To do this, you need to make a fold 3 cm wide, which is clamped between the base of the wings. For better fixation, the base is glued with PVA.
6. The tip of the nose is cut from bottom to top at an angle of 30-40 degrees.

Scheme of how to make a boomerang plane

The boomerang plane is made from a landscape sheet of paper.

The scheme consists of the following steps:

1. Fold the sheet in half crosswise.
2. Fold one half in half again and leave folded.
3. Bend the workpiece in half lengthwise (with the folded section inward). Squeeze well and open the workpiece.
4. Bend the resulting angles to the center line on both sides.
5. Fold the resulting “nose” inward along the fold line located on the reverse side.
6. Fold the workpiece in half and press firmly. Open again.
7. Form wings. Bend small corners parallel to the fold existing at the edges of the wings.
8. Fold in half with the small wings folded inward.
9. Bend the large wings at a distance of 2-3 cm parallel to the entire plane.

The model is for the lazy, because with the right design, no matter how you launch it, it will fly back. Children will really like this paper toy. It should be taken into account that the paper for a boomerang plane needs to be thin and light - then various turns and maneuvers are possible during the flight.

Origami paper airplane

A paper airplane, the design of which involves multiple folds and additions, is also called origami. Or rather, aerogi.

One of the representatives of this type of creativity is the following aircraft:

1. The landscape sheet is folded in half lengthwise to determine the central axis.
2. The upper corners are folded close to the central center line on both sides.
3. The resulting acute angle is bent transversely inward. In this case, it is necessary to retreat 2.5-3 cm further from the previously bent corners.
4. The workpiece is turned over. The top edge is turned up half a centimeter.
5. The workpiece is turned over again, and the upper corners are folded towards the central fold.
6. If everything is done correctly, there should be a small triangle at the bottom, which must be folded upward for additional fixation.
7. The almost finished plane is folded in half with the folds facing outwards. All folds and folds are pressed well. It's better to do this with a ruler.
8. The wings are formed in a special way. When they are laid aside, the middle of the rear plane of the wing and the angle of the lower, rear base of the aircraft must coincide.
9. To improve flight qualities, the wings can be bent again by half a centimeter along the edge.

Attention! This model is capable of flying for considerable distances, provided that it is folded correctly.

The bends on the wings must be strictly at right angles, the aircraft itself must be symmetrical and proportional.

How to make a fast paper plane

A fast paper plane is similar in appearance to a fighter, but has wider wings and, accordingly, its design is different.

It develops step by step as follows:

This model flies faster than others due to its design: a narrow and long nose without weight and wide, maneuverable wings. Such characteristics will allow the aircraft to stay in the air longer.

What does it take for an airplane to fly far?

Paper airplanes are conventionally divided into long-flying and long-flying. Models that fly long distances are narrow and dense. Their main feature is their length and center of gravity, which is located closer to the nose of the product.

The layout of a paper airplane should be proportional, with a correctly aligned center. When folding narrow and long models, it is important that the wings are as symmetrical as possible. It is necessary to determine in advance the places of the folds and make them even and clear.

Video: paper plane, diagram

How to make a paper airplane that flies far, watch the video:

Making an origami plane:

Everyone knows each other
with a paper airplane, who didn’t make one as a child? The children loved to play with
boats, airplanes and toads made of paper. No origami required
any special expenses, develops motor skills, imagination and manual dexterity. This
The safest hobby for kids. You can launch paper toys at home and
even in the yard, without fear of unpleasant consequences. Is it possible to make such toys?
several at once. Children especially like to launch airplanes from the window on
high floor, and then watch them maneuver and fly.

Secrets
skill

Let's consider
several different ways to make a paper airplane with your children.
It is important to know what will affect the flight range of your paper structure.
several factors:

To Work with
paper is pleasant and convenient, it is easily deformable and takes almost
any shape. Folding origami yourself can be beneficial and
pleasure:

Standard
model

Start off
better from the simplest, this is the basic model of an airplane familiar to everyone from
childhood. We only need A4 sheet (you can use notebook or
a sheet of newspaper if desired), a supply of patience and dexterity. To understand how
to make a paper airplane, you need to start with the basics. Teach your kids to
start to cope with simple layouts, and then gradually move on to more
complex. Let's get started:

Making crafts
truck driver

This layout
has the ability to fly like a boomerang.

Reactive
fighter

For boys
I will really enjoy making military combat aircraft that are similar in shape to real ones. Can
use colored paper, and also draw on it with felt-tip pens or
model numbers in pencil.

Layout
red color maneuvers well and gains high speed due to
weights in the nose, while the tail is lightened. In this case, the plane
even the wind will not be an obstacle.

And here is the layout
green color is designed for long-distance flights. This model is capable of slow
and smooth descent, soft landing.

This
real F15 and F16 fighters. They are capable of complex maneuvers, go through a loop,
various dives and turns. Only experienced people can handle such devices.
and a fearless pilot.

Tips for
aircraft design:

• Everybody is here
  depends on your imagination. You can use colored pencils, pens,
  felt-tip pens, markers and paints. Paint ready-made designs.
• Do
  crafts made from colored paper, choose bright shades so that the plane immediately
  stood out from the general background.
• If you want to
  organize competitions to see whose model can fly faster or longer, make your own
  planes of the same color. This will make it easier to distinguish your layout from the layout
  opponent. To understand how to make a paper airplane, strictly follow
  instructions in pictures and videos.

Device with
propeller

Us
you will need a sheet of A4 paper, sharp scissors or a stationery knife, a needle with
bead and a simple pencil. Let's look at the whole process step by step:

• Paper
  bend the sheet so that you get two diagonals, as shown in
  photo.

  

• Turning it over
  sheet face down, folding to create a center line
  in the middle of the diagonal ones. Then we bend the paper on both sides, as shown in
  picture.

  

• Turning it over
  the left edge to the right and bend it up. Then we turn it back and do the same
  the one with the right edge.

  

• Needed again
  fold the left edge, folding the corner over the layout.

  

• Expanding
  right side, bend towards the midline.

  

• Let's make another one
  fold and turn the top corner inward.

  

  

• Right
  bend the corner towards the midline and bend it back. Turn the left side to
  the reverse side, the edge from below must be inserted into the hole on the right.

  

  

• Bend
  layout and make wings as shown in the photo.

  

  

• To
  to make a propeller, we will need a sheet of approximately 8*8 centimeters, lined
  along two diagonals. On each line we make notches at a distance of 5 mm from
  central point.

  

• To
  understand how to make a paper airplane that flies far and is easy to make,
  you need to learn how to make a propeller correctly. Cut the sheet along the lines exactly to
  serif. We fasten the structure as shown in the photo, fixing it in the middle
  with a needle. The needle should go straight through the center line at the intersection
  diagonals.

  

• We fix
  The propeller on the tail of our plane can be fixed with glue or tape.
  The model is ready!

  

Tips for
making origami:

Fast
airplane

Clearly following
instructions, you can make a product that can fly quickly and well. Let's start:

Eat
secrets, knowing which, you can make your product fly longer than usual. Here
a few of them:

Super model
fighter

Why is this
super product? It is believed that it can fly up to 100 meters. However, from
official sources know that the maximum flight range of a paper
the plane was 69 meters. This model has good aerodynamics and
looks impressive. To create a handsome fighter, we need an even
A4 sheet, colored paper is also suitable. Following our step-by-step instructions for
photos, you will get a real fast plane! Work carefully and
carefully, especially when shaping the wings and tail.

How to do
paper airplane, shown in the video.

More
a few secrets from aircraft industry experts:

At the paraglider
very large and wide wings, which allows him to make beautiful and high
flying. Let's start making a paper paraglider:

Original
corn mackerel

This model
Your child will definitely like it, especially if you have a boy. This craft
resembles the shape of a real corn plant. You need to buy a red one
paper, green double-sided cardboard, empty matchbox, sharp scissors,
pencil, glue.

Let's get started
creation:

Original
models

Crafts from
papers are accessible even to children, but require perseverance, patience and
concentration. Here are some interesting models that are sure to captivate
your child into this useful activity:

• Paper Lightning.

  

• Unusual Phantom.

  

• Swift Hawk.

  

• Sudden Mirage.

  

• Fast arrow.

  

• Bison model. Quite a labor-intensive creation process, however
  the result is worth it.

  

• A real shuttle.

  

• Sharp-nosed Heron.

  

Classes
origami is undoubtedly very useful, so don't be afraid to waste your time.
This way you can develop manual dexterity, perseverance and concentration. Wherein
sections of the brain responsible for spatial
thinking and imagination.

Charge for
The basis is our diagrams, photo instructions and video master classes and don’t be afraid to experiment.
Now you know how to make an airplane from a sheet of paper, and you can please
your children with fresh and original ideas.

Today we will tell you how to make a dream plane, of course it will be made of paper, but it will fly far and for a long time. Folding an airplane out of A4 paper and organizing racing competitions is a great idea. Are you ready to prepare thoroughly for this event? Let's find out how to make a paper airplane that will be better than other products.

Step-by-step instructions with photos

Children love folding paper airplanes. Both adults and children know the simplest manufacturing option.

Do you want to make a lot of beautiful and sharp-nosed airplanes? Easily! We will look at the most interesting options below. But now let’s remember and tell the children how to make a paper airplane according to the old pattern.

• take a sheet of A4 format, place it vertically and visually mark the middle line;
• we bend the upper right and left corners to the intended line so that they are placed parallel and their joint does not obscure each other;
• In the resulting figure, we once again bend the right and left sides towards the middle;
• fold the workpiece in half, the fold should be in the shape of a “slide”;
• folding the wings of the airplane.

We have made a plane, but it is not ready to fly yet. Arm yourself with felt-tip pens or a marker, make the desired color and finish drawing the portholes.

Now you can send the airliner into flight.

Airplane with a flight range of 100 meters

After simple airplane models, your child will ask how to make a paper airplane so that the flight duration and range are longer. Let's try to design a model with not just a long flight, but a direct and beautiful one. If everything is done correctly, the finished aircraft will fly at a distance of up to one hundred meters. Let us immediately clarify that this work involves the use of elements of the origami technique.

To make it you only need one rectangular sheet. Let's get started:

• Take the prepared sheet. The color can be any, it is not necessary to use white. You can use office paper with a blue or green tint.
• Place the sheet horizontally and fold it in half. Uncover the workpiece and turn it upright.
  
• Fold the top edges to the intended vertical line. As a result of folding, you should get a triangle.
• We turn the ends of the triangle outward. They should touch their noses to the intended line. We repeat this action again.
  
• We unfold all the parts that we have folded. Next, we bend the paper on one and the other side along the marked lines towards the central strip.
• Where the lines intersect, fold the sheet forward. Carefully press the new fold line with your fingers. Open up all the folded pieces again and return the sheet to its original state.
• Bend the sheet, focusing on the first line, which is located at the top. We bend the resulting workpiece to a line located in the horizontal center. We place the corner so that it is located exactly on the line.
  
• We turn our workpiece over and bend it along the horizontal mark. We turn the workpiece over again and make sure that the resulting triangular part faces the “nose” up.
• We bend the parts located at the top towards the folded line in the center. By doing this action, you will notice that the workpiece will begin to assemble on its own. You need to carefully smooth the paper, do it carefully.
  
• Fold all the parts in half. We bend the wings. When the wings are bent, make small bends; their size should be from one to one and a half centimeters.
• We open the blank and get an airplane. Leveling the craft.
  

The plane is ready to fly, don't fly too far! Now you know how to make a simple airplane from A4 paper. The step-by-step steps may seem long, but all the work will take a little time. Once you get the hang of it, you can make several planes in five minutes.

Your little fidget doesn't like to wait? Read the instructions that will show you how to quickly make a paper airplane using the origami technique. Even if you are new to this business, the work will take five minutes of free time.

This type of craft is even suitable as a souvenir. Delight your colleague or dad by folding an airplane out of a banknote using this pattern.

As for the quality of the craft, this plane flies further than the previous design; parents, get ready to search for the plane after launch!

The most important thing in this plane is to achieve two identical (mirrored sides). If your sides are even, then the flight will definitely be perfect.

So let's get started:

• take a rectangular sheet (can be any color), fold it in half;
• open the workpiece, and, as in the previous version, draw the upper corners to the center line;
• bend the upper spout to the bottom of the triangle, fold the side parts of the top;
• bend the side parts to the center line, you should get an isosceles triangle;
• fold it in half and measure 10 centimeters from the spout;
• at the point where ten centimeters were measured, we make a fold, carefully iron all the lines;
• we divide the spout into two parts and turn each side inside out;
• At the end, on the plane we straighten the triangle in different directions, we get wings, their ends need to be bent upward.

It turned out to be an excellent plane. Please note that no special skills are required to make such a craft; with a few dexterous actions, this elementary plane is ready. We will look at complex designs below.

A plane that can fly far

Ready for more advanced models? In fact, today there is a huge selection of paper airplanes. If we talk about the leading paper crafts, then these are Falcon, Albatross, Eagle Owl or Hawk. We propose to learn how to make a powerful airplane out of paper, which bears the proud name “Thunderstorm”.

As with other manufacturing options, you need A4 paper. Let's do step-by-step production:

• We bend the paper so that the sides are symmetrical. Carefully smooth out the resulting line and return the workpiece to its original position.
• Make a triangle at the top in the same way as was done in the examples above. Each top edge should touch a horizontal line.
• Fold the sheet again, you should get a triangle with a sharp top. At the fold we connect the sheet.
• We unfold the workpiece. Turn the sheet over and bend it on the other side. We bend the sides from the sides to the center point. Fold the triangle again.
• Turn the craft over and bend it again. We bend the finished structure, which should already resemble an airplane, in half. We bend the top of the wings outward. They can be bent to resemble the wings of a real airplane.

That's all, you have learned how to make your own paper airplane. Why is it worth doing this particular craft? You will be pleasantly surprised, the flight of this simple flying aircraft is up to 1000 meters, and if it is launched on the street, the distance can become even greater.

You will say that a paper glider is a craft that will take a lot of time and require knowledge? No, we answer. Its construction will take a maximum of five minutes, and it requires effort for folding and bending. Let's do some crafts and head out into the fresh air!

And, as usual, for work we prepare paper in A4 format, but we add scissors or a knife for office work, as well as plasticine. Make sure that these tools are not handled by small children. When making such a craft with the participation of a child, it is better to take special scissors, the sharp edges of which are protected.

Let's start making:

The glider is ready! Test time. To check how well the glider flies, place the structure vertically down and release it. A correctly made model will fly up. If you notice that the glider is tilting to one side, do not be discouraged. Our model can be adjusted by lowering and raising the adjusters.

Gift plane

Let's continue designing airplanes. The next model will require a little more materials and time, but you will get an attractive toy. And if you try and decorate the finished product, you can get a wonderful gift that will delight your grandfather or father

Let's prepare the materials:

• 2 sheets of thick paper (it is better to use cardboard of any color);
• stationery glue stick;
• simple pencil;
• match packaging.

We carry out the work in stages:

The craft is ready. Of course, such a design will not fly, but it is quite suitable as a toy or as a gift.