How to paint a leather jacket with spray paint and special paint at home? How and how to dye a leather jacket at home

They simply forget that such products lose their appearance over time. Scuff marks appear and the gloss gradually fades. In any case, deterioration in the appearance of the product cannot be avoided. And this will happen in just a couple of years. After all, the factory paint gradually peels off. So how to paint leather jacket at home?

Can it be painted?

Every housewife can restore its attractiveness by painting it. There are a lot of options. But there are only two ways. Currently this is done using aerosol or liquid paint.

However, you should not try to change the color of the product. If the jacket is black or gray shade, then the aerosol should be used in the same tone. IN otherwise the product will be completely damaged. And there's nothing you can do about it.

Special aerosol

So, how to paint a leather jacket at home using spray paint. This method is considered the simplest. To paint, you will need at least several cans of paint of the same shade. According to the instructions, the composition should be applied to the product in the fresh air, and not indoors. Despite this, it is worth wearing protective equipment, e.g. a simple mask or a respirator. This will eliminate the possibility of paint getting into the respiratory tract. In addition, it should be remembered that when sprayed, the composition in the can will get on not only the jacket, but also everything that is located nearby. Therefore, surrounding objects can be covered with film or covered with paper. Ordinary cotton gloves will also come in handy. They will protect the skin of your hands.

What to do with the product

Before you start painting, you should prepare the area. Holding the product in your hands and applying the composition to problem areas will not be entirely convenient. If you lay the jacket horizontally, the paint will be distributed unevenly and dry with clearly visible flaws. Therefore the most best option- this is to hang the product on ordinary hangers.

But that's not all. The product must be hung so that folds do not interfere, and the bottom should not come into contact with the floor. Otherwise the paint will rub off.

How to apply the composition?

Since dyeing a leather jacket at home is not so easy, you should follow some rules. First of all, the product must be cleaned of dirt and, of course, dust. To do this, the surface should be wiped only with a slightly moistened sponge, but not wet. After this, you can spray the contents of the can. This should be done at some distance from the jacket, about 20 centimeters.

Jacketing should be carried out with extreme care. The composition should be applied evenly over the entire surface. In this case, you need to make sure that no smudges appear. If you cannot avoid them, then you should remove excess paint by lightly touching it with a sponge. When spraying, do not forget about the collar and armpits.

After painting, the product should be left for an hour. During this short period of time, the composition will dry completely. That's it, the jacket is ready for use.

How to use the powder

So, how to dye a leather jacket at home using powder? In addition to aerosol, any specialized store sells powder. To use it, you must perform a number of steps.

Pour some warm water into the container and add dye powder. The resulting mixture should be thoroughly mixed and strained without fail. This will remove all lumps from the coloring composition. Otherwise, marks will appear on the painted trigger. dark spots, which cannot be removed in the future.

Leather paint - black, brown or white - is easy to prepare. After mixing, you need to pour a few more liters of water into the container. The container with the solution should be boiled and cooled to a temperature of 45 °C. If the solution is hot, the leather product will shrink and then lose its strength and elasticity.

How to prepare a jacket?

The product should be placed in water for several hours before painting. The skin should be well soaked. Otherwise, in those places where the product is poorly moistened, there may be practically unpainted areas. If bubbles appear from the pores of the skin, then the product must still be kept in water.

How to paint?

So, we figured out how to paint a leather jacket. It remains to understand the process of applying the composition. The dye should be poured into a sufficiently large container. The leather jacket should be removed from the water and wrung out, and then placed in the solution. When painting, the product must be turned over regularly. This way the composition will be distributed more evenly.

At the end of the procedure, the product must be removed from the solution and squeezed out, and then rinsed thoroughly. First in warm water, and then in cold water. To help the paint adhere better, you should treat the jacket with a vinegar solution. It is very easy to prepare. You need to dissolve a tablespoon of salt in a liter of water and add a glass of vinegar. The product must be placed in the resulting solution, then squeezed out and laid out, skin side up, on a wooden surface to allow the product to dry.

12/23/2016 1 1,677 views

A leather jacket is present in the wardrobe of many women and men, but not all of them know: how to dye a leather jacket at home? Over time, the item wears out and loses its original appearance: abrasions, cracks appear, and the shine disappears. The situation is not critical if you know what to do to “revive” a leather jacket.

Aerosol paint

It’s quite easy to return a leather product to its previous appearance, even at home, you just need to know what products to use. Modern stores offer their customers to worry about appearance clothes or shoes in advance and therefore sell aerosol paints various shades and flowers.

Such products do an excellent job of removing abrasions on both shoes and leather items.

In order to paint a leather jacket, you need to prepare:

• spray paint;
• latex gloves;
• sponge

It is better to paint the product outside or in a well-ventilated area, and it is important to remove unnecessary objects so as not to stain them.

1. The leather jacket must be cleaned of dirt and dust.
2. Hang the product on hangers.
3. You need to spray paint at a distance of at least 30 centimeters.
4. Use a sponge to distribute the paint evenly.
5. After painting, you need to wait for the product to dry completely.

Severe abrasions cannot always be removed the first time, so the procedure is repeated, applying layer after layer.

Liquid paint

You can paint a jacket not only with an aerosol can, you can purchase special paint. This product allows you not only to remove scuffs, but also to mask cracks.

For painting you will need:

• liquid paint;
• latex gloves;
• sponge.

To get a good result, the jacket is painted in parts, thoroughly blotting every centimeter with paint.

1. The jacket is laid out on a flat surface; it is best to place a piece of cloth under it that you don’t mind getting dirty.
2. Shake the paint and pour it into a porcelain or glass bowl.
3. The sponge is moistened with paint and applied to the surface of the jacket, rubbed into the material with gentle rotational movements.
4. The dye is distributed evenly so that there are no unpainted areas left.
5. The product is hung on hangers and left to dry completely.
6. When the jacket is dry, it is finally wiped with a dry cloth.

The jacket is painted, now the color needs to be fixed; for this, prepare a vinegar solution:

1. Add 2 tablespoons of salt and 100 g of vinegar to a liter of warm water.
2. Soak a sponge in the solution and wipe the surface of the jacket.
3. The product completely treated with the solution is dried in a ventilated place.

Do not dry the product near a radiator or with a hair dryer; there is a risk that the paint that has not yet been absorbed will run.

Dry powder

Often, in order to eliminate scuffs and cracks, a special solution is prepared:

• a special coloring dry powder is diluted in warm water;
• stir and strain;
• then put on fire, bring to a boil and cool to a temperature of 40 degrees.

Before proceeding directly to the dyeing itself, the surface of the leather product is soaked with water so that all the air is released from the pores.

The jacket is soaked in the dyeing liquid for several hours. Next, the jacket is thoroughly rinsed, first in warm water, and then in cold water, and only after that is laid out to dry. To consolidate the result, treat with a vinegar solution.

Video: how to dye a leather jacket yourself?

It is not difficult to dye a leather product even at home; you do not need to prepare complex dyeing compositions for this. Below are recommendations that will make the coloring process more convenient and simple:

1. The smell of vinegar is very persistent, so that after dyeing your jacket you don’t have to worry about removing it, use an acrylic fixative. You can purchase it at any specialized store.
2. To process the product, you can use any paint, it all depends on your desire and your goals, but before you start painting, be sure to clean the jacket from all contaminants.
3. A sponge is used to ensure that the paint penetrates into the pores and is absorbed as best as possible, however, if you don’t have one, use a woolen cloth.
4. Do not dry the product using various devices, such as a hair dryer. The drying process should occur naturally away from heat sources.
5. Do not try to radically change the color of the product. Most likely, you will simply ruin the item and not get the desired new shade. Use paint of the same color to eliminate defects.
6. You can avoid frequent staining of your jacket if you store it correctly. Hang only dry items in the closet, avoid getting excessively wet and do not machine wash.
7. If you are not confident in your abilities and are afraid of ruining your jacket, do not take risks, turn to professionals.

Even an old and worn item can be brought back to life.

A leather jacket usually lasts us more than one season. It can often be ten years before we decide to part with a beloved item. In general, leather is a fairly reliable material if it is of high quality and durable, for example. You will be able to wear it for a long time and after some time, abrasions and even small cracks will appear on the product in places.

Today we’ll talk about how to paint a leather jacket at home so that it doesn’t look like a handicraft, and the thing will serve you for a long time after that.

Preparing a leather jacket for painting

Let's start with what to paint. This is usually the most difficult. You will have to purchase a special leather dye that you can use at home. Not all of them are the same. You should not buy the cheapest or most expensive option; it is better to stay in the middle price category and carefully select the tone.

No problem if yours is black. But if it’s beige, brown, gray, or even more so, colored, then problems may arise. It is better to choose a slightly lighter tone - then you can apply another layer or use more dark shade, if something goes wrong. But bright hues may not paint over defects, abrasions, and so on.

There are two types of paint:

• Aerosol.
• Liquid.

An aerosol is easier to use - the main thing is to spray from the desired distance, trying to do it evenly. But this does not mean that you need to give up liquid paint; perhaps it will be more convenient for you.

Now we need to prepare the jacket. In order for the paint to adhere well, the leather must be treated and ready for painting.

To do this you need:

• Wash the jacket with soap and gauze.
• Carefully remove any remaining soap with water.
• Dry away from heating devices at natural temperature. Before painting, the jacket must be completely dry, including pockets, seams, and so on. The paint will not adhere well to damp skin.

If the jacket has grease, some persistent oil stains, etc., then the surface must be carefully wiped small quantities alcohol applied to a cotton pad. Do not dry out your skin; use alcohol very carefully!

Once everything is ready, you can start painting.

How to dye a leather jacket at home?

Let's start with the fact that if you are not confident in your abilities, and the item is very dear to you, it is better not to take risks, but read the reviews, find the best workshop, dry cleaner or studio where they dye leather, and go there. This way there will be fewer risks.

If you are still ready to take the risk, then prepare all the materials:

• A deep glass bowl or shallow jar to hold the paint if it is liquid.
• A napkin or rag to “touch up any mistakes” if necessary.
• Foam sponge.
• Rubber gloves (sold in the hardware department of any supermarket).

Lay the jacket face up on a hard, flat surface, as evenly as possible. It is better to paint a jacket, like a complex structural item, step by step - detail by detail, for example, first the collar, then the sleeves, front panels, and so on. But paint houses leather item It’s not entirely worth it if you have no experience and it’s any color other than black or. It is very difficult to do this evenly at home.

Before painting the problem area, try it in an inconspicuous area to test the paint and see the results.

Once everything is ready, you can paint.

For aerosol:

• Read the instructions and check if there are any special instructions.
• Spray the aerosol from a distance of 50-30 cm, unless otherwise indicated. Do it a little at a time, without getting the spray head too close to the leather jacket, so that the area of ​​coverage is large enough without painting areas you don't want to paint.
• Spray in small portions until you start to like the result. It's always better to add a new layer than to go overboard! The paint is always applied only in a thin layer!
• Dry at room temperature.

After this, check the durability of the paint: it should not stain upon contact with the skin, and a strong smell indicates low quality paint.

For liquid paint:

• Shake the paint, pour it into a bowl and soak a sponge in it.
• Apply the dye to the leather jacket in small increments, gently rubbing it in a circular motion.
• The paint layer should be as thin as possible, as in the previous case.
• Dry the product at room temperature and out of the sun!

That's all, actually. When it is completely dry, you can care for it in much the same way. If the product has too much shine, spray the leather with water from a spray bottle and wipe with a dry textile cloth.

It is not always possible to paint over all defects the first time or achieve a perfect result. Don't be discouraged, just apply another coat of paint after the previous one has completely dried.

If your leather jacket is worn out, do not rush to take it to the dry cleaner for dyeing. Leather products can be repainted with high quality yourself at home. Painting genuine leather possible with the help of special aerosols, coloring powders and nitro paints. Products for coloring natural leather are sold in specialized and hardware stores and are much cheaper than dry cleaning services.

Aerosol

A leather product can be repainted at home with a special aerosol paint, which is sold in hardware stores. To paint one leather jacket, you need to stock up on at least two cans of the product. Using a coloring aerosol, you can refresh natural leather, disguise scuffs, and completely change the color of the product.

Painting things in this way is only necessary in the fresh air. You can’t do this in an apartment or even on a balcony. Be sure to wear a respirator to avoid paint poisoning:

1. 1. First, hang the jacket well on a hanger and straighten out all the folds. The floor under the product must be covered so that the paint does not spoil its surface.
2. 2. Before applying the dye, wipe the leather with a damp cloth to remove dust.
3. 3. The spray can should be shaken several times, and then the product should be painted, spraying the dye from a distance of approximately 25 cm.
4. 4. Particular care should be taken to paint the collar, cuffs, pockets and armpits.
5. 5. After painting, the product must be left to dry for at least an hour in the open air. After drying, the updated jacket will be ready to wear.

When painting natural leather with aerosol paint, you need to ensure that drips do not appear.. If sagging forms, they are removed with a slightly damp sponge and painting continues.

When working with aerosols, care should be taken, as the sprayed paint can enter the respiratory tract and cause severe poisoning.

Powder

You can paint things made from genuine leather yourself with a special powder:

1. 1. Warm water is drawn into the basin.
2. 2. Add powder and mix thoroughly. The manufacturer indicates the proportions in the instructions for the dye.
3. 3. After this, the dye solution is filtered through several layers of gauze.
4. 4. Before dyeing, the jacket is soaked in water for several hours so that the leather is well saturated with moisture.
5. 5. The product is wrung out and placed in the dye.
6. 6. During dyeing, the jacket is constantly turned over so that the leather dye applies evenly.
7. 7. When painting is completed, the item is removed from the solution, lightly wrung out and rinsed in cold water.
8. 8. The jacket is hung out to dry in the open air.

The disadvantage of this dyeing method is that the fabric lining will also be dyed the color of the dye.

Nitro paint

Before you start painting, wipe the item with a cloth and soapy water to remove dirt and dust. When the product is washed, it is left to dry. Only completely dry natural leather should be repainted.

The stores offer a wide range of nitro paints in various colors. You need 100 g of dye to paint one product. Stages:

1. 1. 5 drops are diluted in 100 g of paint castor oil and mix well. Castor oil will fix the dye, and the skin will not crack after dyeing.
2. 2. Nitro paint is applied to the surface with a wide brush, carefully working all curves, cuffs, zippers and collar.
3. 3. When dyeing, make sure that the dye applies evenly. In case of defects, another coat of paint should be applied.
4. 4. The product is left to dry at room temperature or hung on the balcony.

You can repaint leather not only with a brush, but also with an ordinary kitchen sponge. The sponge is moistened with paint, wrung out slightly and the surface is treated with it. After repainting a leather jacket with nitro paint, it will be ready to wear within a day. Using nitro paint, you can not only refresh a jacket and hide scuffs, but also completely repaint the item in a different color.

And a little about secrets...

The story of one of our readers, Irina Volodina:

I was especially saddened by my eyes, surrounded by large wrinkles plus dark circles and swelling. How to completely remove wrinkles and bags under the eyes? How to deal with swelling and redness?But nothing ages or rejuvenates a person more than his eyes.

Paint a leather jacket doing it yourself at home is a rather difficult task, since not every person can paint it correctly. Of course, you can take your leather jacket to a professional to have it dyed at a high-quality dry cleaner, but you will have to shell out some of your savings for this. It is best to dye a leather jacket with your own hands at home. If you follow all the recommendations that you can find in our article, then you can paint the jacket yourself without spending money. Unless you have to buy paint in the color you want to dye the jacket, but this will cost much less than having it dyed at the dry cleaners.

If you want to dye your leather jacket black or any other color at home, you should follow the recommendations that we have compiled in our article.

So, you can dye a leather jacket at home using two means:

• regular leather paint.

It should be clarified that before you dye a leather jacket at home, it must be cleaned or washed. This must be done so that when painting the effect does not deteriorate due to dirt or dust.

It would also be a good idea to properly prepare workplace. You should be aware that you will not be able to hold the jacket in your hands while painting, and on a flat surface the paint will not dry evenly. For this purpose, it is best to take a trempel on which to hang a leather jacket. This must be done so that its edges under no circumstances come into contact with the floor, window or other objects.

Spray paint

First of all, let's look at how to paint a leather jacket at home using spray paint. Stock up on at least two cans of paint, then carefully read the label recommendations. It is necessary to dye a leather jacket in this way only in the fresh air, but not on the balcony or in the apartment. In addition, you need to find a respirator to prevent paint fumes from entering your body, as this can cause dizziness or poisoning.

Let's look at the details sequence of actions when painting a leather jacket with aerosol paint:

1. The first step is to hang the jacket correctly so that when painting it, other items will not be painted. The floor under the jacket must be covered with newspapers or polyethylene so as not to stain it.
2. Next, take a damp cloth and wipe the entire surface of the jacket with it to remove dust.
3. Now take a can of paint, shake it several times, and then carefully spray the paint onto the surface of the jacket at a distance of 25 centimeters. You should not stay in one place for a long time; you need to paint your leather jacket evenly.
4. Don't forget to touch up the armpits, pockets and collar.
5. Once you've dyed your leather jacket at home, leave it to dry for at least an hour before it's ready to wear.

If you are planning to paint a leather jacket at home using aerosol paint, you should carefully ensure that the paint does not drip. If they appear, then you need to take a clean, damp sponge and carefully remove them.

Paint for leather products

It is also possible to paint a leather jacket at home using paint intended for leather goods. It looks like a colored powder that must be diluted in water. Painting a leather jacket in this way is a little more difficult than using a special aerosol, but, nevertheless, this method of painting is much more effective.

Let's take a step-by-step look at how to paint a leather jacket at home with special paint:

1. The first step is to wipe your leather jacket with a damp cloth to remove any remaining dirt and dust from its surface.
2. Then take the dye and dissolve it in warm water according to the instructions. After this, you should pass the resulting solution through several layers of gauze to remove undissolved lumps of dye, as they can spoil the result.
3. Now take a large container, fill it with about two liters of water, add diluted dye and put this mixture on the fire. When the mixture boils, it must be removed from the heat and then cooled to room temperature.
4. The leather jacket must be placed in a bowl of clean water so that it is saturated with moisture. This will make it easier to dye your clothes. A leather jacket should remain in water for at least two hours, depending on its thickness.
5. After this, remove the leather jacket from the container, wring it out, pour dye into the container and put the jacket back in it.
6. To make it dye more evenly, you should regularly stir and turn the jacket over, and after it is dyed, you need to wring it out and rinse it in warm water.
7. After this, take two liters of clean water, mix it with two glasses of vinegar and rinse the leather jacket in the resulting mixture.
8. Now you need to wring out and hang the jacket on Fresh air dry.

Thus, dyeing a leather jacket yourself at home is not so difficult. The main thing is timeliness of actions. Your leather jacket will delight you with its updated look for a very long time.