Classic trousers
- If you find it difficult to choose the length of your trousers, take trousers with a small fold at the bottom, so that the back of your shoes is half covered.
- If you squat down and feel too tight/wide, it’s not your size.
- If you can’t find the size, then look for another manufacturer. The pattern and cut are different for everyone. Perhaps you will have luck with another fashion designer.
- If possible, avoid folds in the waistband; they make people look overweight.
The length of the trousers depends on their width. The wider the trousers, the longer they should be. The width of classic trousers at the bottom is 2/3 of the length of the shoe, i.e. One third of the shoe should be visible. For such trousers, the length at the back can reach half the height of the heel or cover 2/3 of the heel. The front of the trousers should lie on the shoe and form one crease. If the trousers are without cuffs, then the hemline has a slope: the trousers are slightly longer in the back than in the front. If trousers have cuffs, then the bottom of the trousers should be straight (parallel to the floor). The width of the cuffs in trousers is from 3 to 5 cm.
Wrong length!
- The length of the trouser leg should slightly cover the boot, ideally it should reach the middle of the boot. At the back it should be to the middle of the heel.
- Pants falling over shoes should not form more than one fold.
- Pants should be of such length that socks do not show through. But when a man sits down, his socks are visible anyway. Therefore, there is something about them separate rule: they should be matched to the tone of the trousers and be of such length that bare legs are not visible - this is bad manners.
Chinos, khakis and corduroys
More informal trousers, such as chinos, khakis or corduroys, should be slightly more fitted than classic trousers. In addition, they can be worn 3 to 4 centimeters below the waist. However, it is worth paying attention to this point. If you wear chinos to work and fit Business casual or Smart casual style, then the length and width of the trousers should be closer to the classic style. If you choose casual style- then the trousers can be chosen tapered and shorter, even slightly revealing the ankle. Or vice versa, wider and longer, so that a fold is formed at the bottom.
- When choosing the length of trousers, you should proceed from the dress code. The larger the fold at the bottom, the more informal the dress code.
- Pants should be tight-fitting, so don't be alarmed if your pants feel a little tight when squatting. This is fine.
- Don't worry if your pockets protrude a little when squatting. This is normal for chinos, khakis or corduroys.
- Avoid folds at the waist; the two-finger rule is also relevant here.
Jeans
Perhaps the most informal of all pants (we don’t take shorts into account). There are many options for how jeans should fit correctly. Basically, jeans are worn even lower than chinos. On most people, jeans that are slightly tapered at the hem look good. They should be slightly tight if we are talking about fashion and beauty. To be free, if we are talking about comfort.
1) To choose the right men's trousers, you need to walk at least a couple of steps after trying them on. They should be as comfortable as possible. It is believed that you can fit two fingers into the waistband of “comfortable” jeans. Usually, after you have walked, it is easier to understand whether these are “your” pants or not.
2) An important nuance - trousers should be held at the waist, not at the hips. This is not just a tribute to classics or fashion, but an aid in the visual correction of the figure. By nature, a man's belly is somewhat convex, and it is precisely the trousers that softly fit it and hide this small flaw. If the trousers hang on the hips, the emphasis will fall on the stomach.
3) If dress trousers have pockets, then check that they do not protrude, as this deprives the image of elegance and causes an association with a boy who has stuffed everything into his pockets. In general, trouser pockets are intended only for keys or a wallet. For everything else, there is a briefcase or some other bag.
4) It is also worth paying attention to the man’s physique in order to emphasize his advantages and gracefully hide his figure flaws. For example, full man Straight trousers without creases and with wide legs are more suitable, and thin tall man- trousers with cuffs and pleats at the waist that will help hide excessive thinness.
5) Do not forget that the trousers will not hold up on their own, and you will need a belt or suspenders. The classic option is, of course, a belt. For this purpose, 6 loops are usually made on trousers. If there are fewer loops, the pants may fit a little worse. The color of the belt should match the color of the shoes, and should not contrast too much with the color of the trousers. The more modest the belt looks, the better, of course. For extravagance, you can also wear suspenders, but do not forget that you need to choose one thing. Wearing both at the same time is a sign of terrible taste. By the way, the color of the suspenders should match the color of the tie (or be as close in tone as possible)
6) Since trousers deteriorate much faster than jackets, it is worth buying them together, but it is better to take two pairs of trousers for one jacket. It is not necessary that the trousers and jacket be the same color. In this regard, you can experiment pleasantly, but you should not get carried away so as not to look vulgar.
Look interesting video about trousers:
Typically, men's trousers do not occupy the central part of the image. Ideally, this element of clothing just harmoniously complements the style. Simply put, it is not recommended to focus on pants; there are beautiful accessories, quality shoes and fashionable shirts.
On the other hand, trousers are one of the main things of a basic wardrobe, on which the perception of appearance as a whole depends. Therefore, it is extremely important not only to understand how trousers should fit on a man, but also to actively apply knowledge in practice.
Choose pants based on your body type. For example, tapered pants that are fashionable today are not suitable for everyone. Mostly men of average height with narrow waist and skinny legs.
Avoid high-waisted pants with lots of pleats.
With the help of cuffs on trousers, short men can visually increase the length of their legs. Tall guys should choose straight pants without cuffs or pleating.
If possible, avoid baggy or too tight pants.
Each parameter of the trousers must be optimal. Including length and width in all places - waist, hips, knees.
Pay attention to how the pants fit in the back. This is one of the most difficult moments. Especially when the trousers are not covered by a jacket, coat or jacket.
Regardless of how well the trousers fit on a man, the item changes its natural position throughout the day. Choose a quality belt or wear suspenders.
Make sure that sitting, standing, walking and bending in your trousers is comfortable, that is, there is no feeling of discomfort at all.
Wear the type of shoes you will wear trousers with in the future.
Before going to the store, measure your waist circumference and inseam length, that is, find out your size. But under no circumstances should you buy pants based on this alone. Trying on is required.
Unfortunately, choosing men's trousers that will fit a man perfectly is quite difficult. Only adjusting the length does not cause much trouble. Alternatively, you can have your pants sewn by a tailor. In other cases, repeated fitting will be required. Be that as it may, initially look for trousers that will highlight your figure, that is, fit as well and correctly as possible.
If we consider men's wardrobe, then we can say with complete confidence that one of its basic elements will be trousers. Despite this, many men do not always know how to choose this item of clothing correctly. One of the main problems faced when making a purchase is the question of how long men's trousers should be.
Rules for choosing classic trousers
Pants of this cut are among the most common and in demand. This model suggests that they sit above the hips, just below the navel.
The width of the product must be selected correctly. It is unacceptable if the trousers:
- too tight;
- they sag in some places.
In no case should the product’s pockets attract attention by bulging out unattractively.
The classic version assumes the presence of arrows that must be perfectly straight.
The model should not hinder movement.
The influence of a man's height on the choice of trousers
Of course, first of all, height affects what the length of trousers for men should be, and the choice of cut also depends on it.
Short men need to take a closer look at models with a straight cut without pleats at the bottom. This product will not weigh you down appearance.
Those who are very tall should choose models with cuffs and or pleats. They visually reduce height.
How to choose the right size
Many people are interested not only in what length should be, but also in how to correctly determine the size.
In order not to make mistakes, you must follow the following recommendations:
- You need to try on trousers under the T-shirt and shirt with which you are going to wear them. The distance between the product when fastened and the body must be at least 4 centimeters. If it is smaller, the product will press because it is too narrow. If the free space is too large, then even tightening the belt will not save the situation, since ugly gathers will be visible on the belt.
- There should be no folds on the belt, as they visually make you look fuller.
- After trying on the product, you need to do several squats. If there is stiffness in movement, then you need to buy larger size trousers.
- There are situations when the product of the trousers slightly restricts movement, and the product one size larger is already too large. In this situation, you need to try on the next model or product from another manufacturer. The cut and patterns usually differ between different fashion designers
What should be the length of trousers for men?
Even if the trousers fit perfectly and meet all style requirements, the wrong length of the product can ruin the appearance.
The answer to how long trousers should be for men is quite simple: reach the middle of the shoe. The maximum length is up to the heel. At the front, the product will cover the laces and form a slight fold. In this case, it is necessary to ensure that the fold is not too large. If there are several of them, this is sure sign that the product needs to be shortened.
However, there are cases when, even with the correct length, there are several folds - this is an option when the fabric of the product is very thin. Therefore, if it is necessary for the product to look strict, in accordance with classical rules, you need to buy trousers made of thick fabrics.
Skinny pants
If the product is selected for everyday life, and the dress code at the place of work allows you to move away from the classic version, the question arises of what length men should have.
Products in the neoclassical and casual styles are slightly tapered. Their length will be less than classic version. It should allow you to see the top of the shoe. The best option shoes in in this case Shoes with laces or Oxfords are considered. The lacing should be visible. This image is very relevant lately. It is considered to be a European style.
Short trouser options
The main task that designers set for themselves when creating shortened models is to sew trousers that will have clear lines, but at the same time reveal the shoes.
The length of the product in this case only reaches the ankle. It should be remembered that this option will not be appropriate on wide models.
Trousers with rolled cuffs
This product is a kind universal option, since its length can, if necessary, change depending on the situation.
Of course, this option is not suitable for places with a strict dress code, but it is an excellent solution for a corporate party or outdoor events.
When rolling up your trousers, you need to take into account the height of the shoes, their bulk and style. If the shoes are high, then the gap between them and the trousers should be minimal. A wide gap is acceptable with light summer models.
If the shoes are loafers, sandals or moccasins, then the length of the trousers should reach the ankle.
Buy or sew
Whether to purchase trousers or have them made to order depends on your financial situation.
A custom-made product will fit perfectly as it is made to precise measurements. In this case, the question of what should be the length of trousers for men will disappear on its own, since the craftsmen who are engaged in tailoring are well informed in this area. The disadvantage of this method of purchasing trousers is the high price.
A product purchased in a store will cost an order of magnitude cheaper, but it is quite difficult to find a model that will fit like a glove. You shouldn’t hope that you won’t need to go to a sewing studio. The length of the product is initially standard, taking into account the width parameters. Therefore, most likely, you will have to remove extra centimeters.
What should be the length of trousers for men: photo
Men's clothing often does not feature the same rich colors that are present in women's outfits, so here great attention is given to various details.
When choosing clothes, including trousers, men must take into account every little detail, not to mention such important things as the size and what length of trousers for men should be.
Just as an incorrectly chosen length of trousers can ruin a man’s appearance, so a correctly chosen one can emphasize the advantages of the figure and hide existing shortcomings.
If we look at regular classic straight trousers (or their tapered models) in online stores or on the shelves, we will see some kind of shape for different sizes.
And if you look at Russian women, very often (but not always) we will see hips of some kind like this. The difference is noticeable, right?
The thing is that the trousers are mostly sewn on square shape pelvis And here, most women (in my opinion) have a diamond-shaped pelvis. And this is a completely different shape, a completely different distribution of volumes, etc. You can read more about pelvic shapes.
And what happens when we put on straight trousers on a diamond-shaped pelvis.
The model sits quite loosely at the waist, but the legs themselves are tight at the hips. It is very uncomfortable to sit in such trousers, especially if the fabric does not stretch. And the silhouette looks completely different from what the model suggests.
According to my subjective assessments, in a typical mass-market figure, the ratio of hip circumference (pelvis at its widest part) to hip circumference (legs at its widest part, thighs in Russian) should be approximately 55% or less. The thigh should be 55% narrower than the hips, and the narrower the thigh, the better these classic trousers fit.
The trousers fit best on models; their ratio can be even 50%. Teenagers' legs may be even narrower, for example 46%.
And if you have a diamond-shaped pelvis, then you can even do it without excess weight do not fall into this proportion. I saw a leg with a volume of 60% of the hip circumference on a very slender girl who wears sizes 38 and 40. And, despite her overall slimness, this girl could not find classic trousers in stores. I calculated that in order for her to normally buy trousers in stores with such a hip circumference, she needs to gain weight in her buttocks by 8 cm!
I met 61% in overweight women and this was my personal maximum so far.
Using a measuring tape, measure the circumference of your pelvis at its widest part. And measure the circumference of your leg at the widest part. And then according to the formula:
leg circumference: (hip circumference: 100) = %
The result will be how many percent the leg circumference is less than the hip circumference.
If 55% or less - hurray, the trousers will most likely fit normally in this place.
Each additional percentage of volume significantly reduces the possibility of a perfect fit.
If the percentage is above 58, then it will be very difficult to choose straight trousers without fitting them in a studio.
And if 50% or less, there will be no problems with trousers, but you need to eat better :-))))
What to do if your legs are voluminous and you desperately need classic trousers?
You'll have to contact the studio. To do this, you need to choose trousers in the store that are slightly loose in your legs. They will be very wide in the pelvis and waist. And now it will be necessary to stitch them in the butt and waist.
To make suturing possible and not very expensive, choose models without crazy decorative finishing in this area. But since we are talking about classic trousers, they will most likely have a discreet design. And yes, your butt in such trousers will still look not like a fashion model’s butt, but like your butt. But the dress code is followed and you will be comfortable sitting at work. And no horizontal folds or creases.
You can also look for trousers tailored to the hips diamond-shaped, there is a greater chance that the voluminous legs will fit. These trousers will look something like this.
But you rarely see such models in offline stores in Russia.
If you don’t have a model figure, but you want to wear clothes comfortably and beautifully, I invite you to my course “Perfect Fit of Clothes.”
Men's trousers are one of basic elements any man's wardrobe. Today there are many styles, styles and varieties of trousers. This is an undoubted attribute of a business person, student, “party-goer” and ordinary worker. As soon as you replace one pair of pants with another, the dress code will change completely. Therefore, it is very important to know how trousers should fit and how long they should be according to all the rules of modern style.
Despite such an abundance of choice, not all men understand how to wear this item of clothing correctly. The length of the trousers depends primarily on the model.
A classic style always requires rigor. According to the standard, the trouser leg covers the heel to the middle. This is the mid-heel rule that is used in the classics. Some stylists are of the opinion that the hem of the trouser leg should be above the heel, and a gap of 1-2 centimeters is acceptable. Some believe that the maximum length to the end of the heel is acceptable. The product then hides the laces and laces and forms a fold. There should be one fold, if there are more, you need to tuck it. Several folds are permissible only when the fabric is very thin and does not lie flat. But even in the classics, the styles of trousers are different, and this only depends on the tailoring of the men's wardrobe item.
If the classic trousers are wide-cut with an arrow in the center, the product must be adjusted to fit the figure and the length must be adjusted correctly. As a rule, overweight men choose such pants to hide some figure flaws.
Attention! When there is a special event coming up, and it is necessary for the product to look strictly in accordance with all the rules, choose tailoring from thick fabrics. With the right length they look perfect.
Rules for tapered models in casual style
In this style, both the jacket and trousers are tapered. Pants may have a cuff. This product requires a shorter length; the “mid-heel” rule does not apply. This piece of clothing is created for stylish men, and trousers cannot be left long, otherwise they will bunch up. Tapered pants should be such that the top of the shoe is visible. They can be combined with Converse, Oxfords, moccasins, they can open the ankle or be rolled up a little more. But if these are classic tapered trousers, turns up are not allowed and the product must reach the edge of the shoe, forming a fold on top of the shoe. When it comes to jeans, and you can wear them however you like, there are wide floor-length jeans and skinny ankle-length jeans.
Shortened models
These pants are not suitable for formal receptions and formal style. Slacks, joggers, and chinos can be shortened. Their length reaches the ankle. The shortened model is often tapered, with clear lines, and a straight cut. You can consider the cuffs on a narrowed model; the length may vary. When wearing them with moccasins and loafers, the length should reach the ankles.
Pants length depending on height
When buying trousers, try to try on as many models as possible. Perhaps you will find exactly the one that will fit you perfectly. If not, manufacturers expect the pants to be adjusted to fit. We are all different heights, and it is best when going to the studio to take with you the shoes that you plan to wear most often with this model. A professional seamstress will adjust the length of your trousers depending on the fabric and style.
Main! Whatever trousers you choose, the main thing is that they fit stylishly, effectively and meet the requirements of style, outerwear and shoes.
The right shoes
The length of men's trousers depends not only on their style and the man's build. It is very important what shoes you plan to wear them with. Strict classic boots and shoes do not require shortened models. The acceptable length can be “mid-Atlantic”, that is, it ends at the hem of the selected shoe. You can “play with” sports shoes by making the cuffs with privet or simply tucking them up.
