Bow like a flower
Bow for any outfit
Decorating the outfit
Severity is not a hindrance to beauty
You should get a beautiful but discreet bow. Careful alignment and tightening ensures a strong hold. Creating a bow directly depends on the choice of the entire outfit as a whole. Knowing how to tie a bow on a dress, a fashionista will always be ready for a grand entrance, even in a simple outfit. With original part appearance will always be festive and individual. Many will agree: if there is a bow in the image, there may not be any decoration on the neck.
All attention to the hair
Fixing the “bundles”
Decorating your hair
Nylon bow in hairstyle
Initially, rose petals are created according to a template.
Take paper 5 cm wide and 8 cm long. By ready-made templates 15 pieces of organza petals are cut. The edges of the fabric should be melted with a lighter.
The blanks bent in half and twisted into loose tubes turn into buds. At the very base, the bud is attached with threads; the leaves need to be hemmed one after another. An elastic band is sewn to the finished flower, which acts as a fastener on the hair. You can round off the entire composition with a satin ribbon, tying it around the base.
50 ideas on how to make a hair bow hairstyle, step by step instructions
The seams are hidden, the bow is tied under the bud.
Hair bow
The gift starts with a bow
Packaging is part of the surprise
The length of the tape is selected depending on the size of the box. The box is placed on the tape in such a way as to position it in the middle of the tape. The ends of the tape are drawn around the top and around. You tie it, but without a knot. After all the steps, “tails” of equal length are obtained. The ends are brought up, going down along the midline. It remains to make two main loops, which go into the formation of the main knot. It turned out to be the beginning of a bow.
How to tie a bow for a girl
Girls love to dress up, and they start doing it from the very beginning. early age.
How to tie a ribbon bow? How to tie a bow correctly: diagrams, photos
While they are little, their mothers dress them up, dress them in elegant dresses and tie them with bows. Tying a bow is a whole science, and mothers must master it perfectly. In this article we will look at several ways to make life easier for mothers. So, all you have to do is buy wholesale bows online and continue reading the article.
Method No. 1
Method No. 2
Secure the ponytail with an elastic band, wrap it with ribbon and tie a knot so that both ends are the same. Take a tape that can be fixed well. Nylon tape works well, or even better, corrugated tape. Both ends of the ribbon must be folded and tied in a bow.
Method No. 3
Method No. 4
Method No. 5
A cute bow is a salvation from boring buns and gray outfits. With this beautiful element, your hairstyle and clothes can become your favorite ones. All you need to know is
Multiple options from strict to romantic will find their fans. This article shares little secrets on how to tie a bow correctly. Indeed, this decoration has many uses. The bow looks harmonious as an additional decoration for a gift, clothing, hairstyle, or room interior.
A sought-after classic
The classic method looks simple and at the same time interesting. The finished bow is decorated with beads, rhinestones and other items.
Here is the simplest option on how to tie a bow beautifully. Without twisting the tape, carefully fold it. To visualize it schematically, it looks like an M. The end result is two loops at the top and one at the bottom.
The left loop is placed on the right loop in a crosswise manner. After tying a simple knot, the upper loops are pulled out. The bow straightens out and the core is smoothed out. Excess ends are cut off. Can be given triangular shape. To prevent the edges of the tape from becoming frayed, they are burned.
Bow like a flower
It is best to tie a bow for a gift or a hairpin in the shape of a flower. You can get it using a skillfully tied ribbon.
- Take about a meter of satin ribbon and start working. Approximately 25 cm is removed from the edge of the tape. The section is folded into a loop. The loop is fixed between the fingers - index and thumb. The long end of the ribbon on the left side goes into the second loop.
- The first and second loops are fixed with fingers. The sequence of formation of such loops is carried out on both sides. When the tape runs out, you will have 4-5 air loops.
- An impromptu bouquet is folded in half. The lower part is secured with wire for secure fastening. For these purposes, you can use silk thread.
- The ugly is disguised workplace rectangular tape. When wrapping an area, a piece of tape can be hemmed or glued.
- A bundle created from loops must be “revitalized”. It is enough to stir them up and pat them with your fingers, separating them from each other. As a result, you need to create a rounded shape. Burning with a lighter will save the item from wear and tear.
Depending on the purpose of the flower, the issue of additional decoration is decided. For a gift, a long twisted ribbon is sewn in. Such an accessory will look very relevant on a cosmetic bag or bag.
Bow for any outfit
“Closing” a belt with a bow is not the most difficult task. It's just as simple. Perhaps the lacing method is named after its original use. By making an unfinished knot on the belt, you get ends of different lengths.
The longer one overlaps the shorter one, from which a loop is made. The resulting air ring is located above the long one.
The long end is threaded up through the loop and back inside.
There is a more complicated way to tie a bow on a belt. But it's worth it to be beautiful. A single incomplete knot is formed. The ends of the belt are overlapped like this - left to right. The left edge is brought out from above, passing it under the right. A bow petal is formed from the left end. After which it is placed under the hanging left end of the belt.
The right end is firmly fixed with fingers, while the left one remains working. The working edge is passed under the petal without changing direction - from right to left. As a result of all manipulations, you should get petals - a bow with a neat jumper.
Decorating the outfit
For any special event you can create a masterpiece from a satin ribbon. Dresses or sundresses will take on a different meaning if they have a decorated look. And again, the skills of how to tie a ribbon bow will come in handy.
The bow is suitable not only for romantic and dreamy people. Some girls use the technique of weaving a bow on wedding dress, using a white satin ribbon as a basis.
Severity is not a hindrance to beauty
For more collected and restrained natures, we introduce strict classics into the wardrobe. The outfit is no less interesting and beautiful than its previous counterpart.
As in the previous case, the knot is not tied completely. The right edge of the belt remains longer than the left. Work is carried out on the left side. Putting it on the right end, we pass under it. They bring it out on top of the right one. After that, the right end is wrapped around the edge on the left, bringing it under the left edge, again bringing it up.
You should get a beautiful but discreet bow. Careful alignment and tightening ensures a strong hold. Creating a bow directly depends on the choice of the entire outfit as a whole.
How to tie a bow?
Knowing how to tie a bow on a dress, a fashionista will always be ready for a grand entrance, even in a simple outfit. With an original detail, the appearance will always be festive and individual. Many will agree: if there is a bow in the image, there may not be any decoration on the neck.
All attention to the hair
The quite familiar question of how to tie a bow on a dress takes on more complex forms. Today ladies are interested in the technique of textile craftsmanship with hair. An unusual combination is not at all a newfangled fad; our mothers and grandmothers also used braiding with bright ribbons, trying to captivate the public.
Decorated and well-groomed hair is the first impression of a neat person. This rule applies primarily to girls. Long hair look especially impressive if they are collected in a hairstyle. Classic option is a “braid” or “tail”, which is held on by an elastic band or ribbon.
Knowing how to tie a bow beautifully, you can turn simple hairstyle on holiday.
There is a small condition - the decoration must be harmoniously combined with the overall outfit. The decorative element can be different sizes and textures, but each case has its own requirements. For example, you cannot wear a strict one under an airy and romantic bow. business suit, and vice versa - tie the ribbon with a tie type under Evening Dress. Similar rules should be followed when decorating a bow as a headdress.
Perhaps experiments on the topic “how to tie a bow on your head” will reveal for someone a hidden calling as a stylist.
Fixing the “bundles”
The bun of hair is secured with an elastic band, after which a knot of nylon tape is tied on top. Moreover, one end is shorter than the other.
The longer edge is folded into three folds and tied with the short end. As a result, with simple movements you can build a magnificent bow.
To decorate the assembled bow, use a satin or nylon ribbon. Using a thread and a needle, the ribbon is stitched in the middle. At the end of the work, the thread around the edges is tightened and secured. The bow turns out to be voluminous, so it is sewn to the elastic band. This option is used to create any hairstyle. To ensure that its edges do not lose volume, you need to “pass” fishing line along the edges of the tape.
There is a second way: the hair is covered with tape and fixed in a knot. The bow should have straight ends. The edges are folded and compressed in a knot. You can knot the ends several times. Volume plays a role when creating an interesting and original bow.
When going for a walk, to visit a friend, or to an event, it is important to look neat. There is always not enough time, therefore, in order not to “throw around” and not be tormented by the question of how to tie a satin bow, it is worth “making friends” with the capricious satin in advance. The texture of this material does not hold knots well. For persistent beauties, we recommend the method of “hemming” the bow.
The tape is placed in desired shape and is fixed with invisible pins to the hair. Some people pass a satin ribbon under the hair, bringing the ends out. It all ends with a bow. You can use beaded and studded trim.
Decorating your hair
Almost all girls begin to learn how to create hairstyles on their dolls. Someone remembers skills in adult life, someone loses them or does not acquire them at all. But the bows never cease to touch the hearts of others. Compositions of ribbons and textiles create the impression of tenderness and lightness.
Everyone who is armed to create beauty is learning how to tie a bow from a ribbon.
Nylon bow in hairstyle
The nylon tape gives the bow some airiness. On hair it looks original and harmonious. To create something with your own hands, you need to purchase a 10 cm wide ribbon.
Initially, rose petals are created according to a template. Take paper 5 cm wide and 8 cm long. Using ready-made templates, 15 pieces of organza petals are cut. The edges of the fabric should be melted with a lighter.
Rosebuds are also made from organza or nylon ribbon. Three circles are cut, one smaller than the other.
The blanks bent in half and twisted into loose tubes turn into buds. At the very base, the bud is attached with threads; the leaves need to be hemmed one after another. An elastic band is sewn to the finished flower, which acts as a fastener on the hair. You can round off the entire composition with a satin ribbon, tying it around the base. The seams are hidden, the bow is tied under the bud.
Hair bow
Time creative ideas dictates innovations and changes in the image. Original things can be made not only from scrap materials, but also from your own hair.
Those with long hair can create a chic bow out of it. This hairstyle is original and fresh, since everyone’s hair is individual in structure, color, and density.
The most active fashionistas have long figured out the question of how to tie a bow in their hair. For those who don’t want to be left behind, today we’ll reveal the basic recommendations for creating a bow.
An area is selected on the head where combed strands of hair are attached to the ponytail. Positioning it on the side will add a little playfulness to the owner of the hair. Hair is smoothed with light movements.
A wide brush will save you from unwanted roosters. To add volume, a backcomb is done on the head, the hair is lifted from the roots. If necessary, varnish is sprayed on them.
The entire tail is passed through a fixed elastic band, towards the face. Repeat the movement twice. When re-twisting, it is not pushed all the way through. It looks like a bunch. Divide the bundle into two equal parts.
Loose hair is pulled back and secured with bobby pins. The separated bundles are now tied with a strand and create the impression
For reliability, the entire hairstyle is fixed with hairspray and hairpins.
The gift starts with a bow
Today the question is not “How to tie a bow from a ribbon?”, everyone understands that the chosen item as a gift looks much more festive if it is packaged correctly. For this, various boxes, caskets, bags and bags are selected. And only the bow speaks of the solemn purpose of the enclosed item.
You can make it from tape beautiful bow, applying it in various cases of life. A few practice attempts will help you create gorgeous gift items in the future.
Arm yourself with ribbons, scissors, and a lighter to correct “loose” ends. In some cases, thread and fabric may come in handy. Of course, creativity must include patience and imagination.
The length of the tape is taken to be at least a meter. Many centimeters are spent on folds and folds. It is not always convenient to work with satin, especially for beginners; the fabric is very slippery. Therefore, you should pay attention to velvet, cotton, organza. Experiments with different types ribbons will help you choose the right combination.
A surprise is a very important matter, and its presentation is part of the whole gift. You can create a decorative element with your own hands. There are always numerous ribbons and ribbons in the household. We select the most suitable tape and start creating with it.
A competent solution to the question of how to tie a bow on a box will eliminate the likelihood that the gift recipient will guess about the homemade packaging.
Your imagination to create original packaging will fuel the desire to see the gift. Any box of chocolates with a bow will become a beautiful “clothes”.
Packaging is part of the surprise
The length of the tape is selected depending on the size of the box.
The box is placed on the tape in such a way as to position it in the middle of the tape. The ends of the tape are drawn around the top and around. You tie it, but without a knot. After all the steps, “tails” of equal length are obtained. The ends are brought up, going down along the midline. It remains to make two main loops, which go into the formation of the main knot. It turned out to be the beginning of a bow.
Beautiful and smooth work take the following steps: with gentle movements, tighten two loops, while leveling the tape. It may turn out that the ends will be different lengths, but for this there are scissors that will correct the error.
As a tip: to eliminate thread fraying, use the flame of a lighter or candle, scorching the ends of the tape.
If the color of the ribbon does not match the packaging, and there is no other ribbon, wrap the gift in a plain white sheet. It definitely suits any option. Now you know how to tie a bow on a box. The person receiving the gift will undoubtedly be happy.
How to tie a bow for a girl
Girls love to dress up, and they start doing it from a very early age. While they are little, their mothers dress them up, dress them in elegant dresses and tie them with bows. Tying a bow is a whole science, and mothers must master it perfectly. In this article we will look at several ways to make life easier for mothers. So, all you have to do is buy wholesale bows online and continue reading the article.
Method No. 1
Folded bow. Take a regular ribbon and firmly secure the ponytail on your head with an elastic band. Tie the ponytail with a ribbon so that one part is approximately half as long as the other. Fold the long part three times and tie it with the short one.
Method No. 2
Secure the ponytail with an elastic band, wrap it with ribbon and tie a knot so that both ends are the same.
DIY ribbon bow: step-by-step instructions
Take a tape that can be fixed well. Nylon tape works well, or even better, corrugated tape. Both ends of the ribbon must be folded and tied in a bow.
Method No. 3
As soon as you learn how to tie regular bows, it’s time to start making corrugated ones. It can be easily fixed in the knot area. The bow should be tied right in the middle, tightening it with sufficient force. Re-tie and tighten again, being careful not to loosen the first knot you tied. Don't forget to straighten the edges of the bow.
Method No. 4
The assembled bow looks very beautiful. Build such a miracle on the head is not particularly difficult if you know what and how to do. Take any ribbon, smooth or corrugated, pass a strong thread along its length and tighten it. This entire structure must be carefully sewn to an elastic band that matches the color. You will get a beautiful bow with an elastic band, and you won’t have to worry about how best to tie it. If you assemble the bow not with a thread, but with a fishing line, it will turn out more beautiful and voluminous.
Method No. 5
The satin ribbon does not hold the texture well, so you won’t be able to create a lush bow. It is better to make only a single knot on a satin ribbon. The long, freely hanging ends of the ribbon look very beautiful.
Ribbons can be woven into braids rather than tied into bows. For these purposes, you need to take a longer tape. Weave the ribbon into the braid so that the long ends remain, then with a counter motion, wrap it around the braid again and tie it with a single knot.
Mothers of girls need to master the science of tying bows as quickly as possible in order to create stunning hairstyles for their princesses.
Bow - signature move gift packaging. Voluminous and sparkling geometric shape or aimed at different sides, plain or variegated, like a peacock’s tail, it gives the gift a unique look. Playing with color, shape, combination different materials: ribbons, tulle, wire, feathers and braid for packaging flowers - a field for creativity, imagination and experimentation. Making a beautiful bow requires an eye, manual dexterity and patience. But don’t spare the effort - because in return you will receive an enthusiastic and joyful smile from someone who will admire the presented gift, decorated with your luxurious bow.
1. Flower bank
The first step in creating this fantastic flower will be an ordinary ring, which you will make from a ribbon, holding it with your thumb and forefinger.
This movement should be repeated until there are more than ten such rings in your hand - depending on the desired size of the bow.
We tie the rings in the middle of the long narrow tape, straighten the loops one by one and secure them to the gift.
2. Classic bow
A classic bow that transcends time, fashion, space and circumstances.
The main thing is that the ribbon does not wrinkle when tying.
3. Strict bow
Fold the ribbon in half as shown in the picture. We fix the junction of the ends of the tape with glue and smooth it by hand.
Take a small piece of tape (or a different color) to wrap around the unsightly joint.
Glue the ends of the second tape with back side products - and the bow is ready.
4. Tiered bow
To create such a bow, you should take three pieces of ribbon of different width and color.
Trim them so that the widest piece is the longest and the narrowest is the shortest.
Form the ends of the bow.
Now tie the folded pieces together with another ribbon, leaving long ends to secure the tiered bow on the gift bag.
Golden ways to tie a bow
Two-color bow
After the previous manipulations, dealing with a two-color bow will be as easy as shelling pears.
We take narrow and wide ribbons of different colors.
First, we form a loop from a wide tape, fastening its ends with glue, and then do the same with a narrow tape applied to it.
We smooth the resulting “sandwich” tightly with our hands and fix it from the inside in the center with glue or a paper clip.
The final bow is formed using a third ribbon, long enough to be tied to the gift bag.
6. Bow Dior
Some say that the Dior bow is a more complicated version of the “strict” bow.
We glue together “rings” from pieces of tape of different lengths, which we then connect together using glue or a stapler.
The half-finished bow is placed on a base - a ribbon with cut out ends.
And with a third - small - piece of tape, you should disguise the paper clip, gluing its ends to the back of the bow.
7. Terry bow
A terry bow (“Pom-pom”) will look more impressive and elegant if you take a ribbon made of hard material that can hold its shape.
We roll it into several rings, the diameter of which is equal to the diameter of the future bow.
Smooth out the loops and make diagonal cuts as shown in the picture.
We fold the loops again so that the cut triangles are in the center of the folded strips of fabric lying in front of us.
Then you should tighten the slits tightly with tape or wire and alternately straighten all the loops on each side of the bow, starting with the inner ones: one to the right, the other to the left, etc.
Let’s fluff up the bow and mentally admire the beauty that we have just created playfully.
8. Chrysanthemum bow
Making a chrysanthemum bow is much easier than it seems at first glance.
To do this you will need strong tape, wire, scissors and a little more patience than in previous versions.
The beginning of making “Chrysanthemum” is reminiscent of working on a terry bow (see above “1. Terry bow”).
But after fastening the ribbons with wire at the cut site, the time comes to give them the appearance of curly chrysanthemum petals. To do this, uniform cuts are made on the loops folded together.
After this, we begin to straighten the “petals”, turning the loops first to the right, then to the left, starting from the inner ones, first on one and then on the other side of the bow.
Bow - universal and favorite decoration girls of all ages. A young fashionista with white bows will look bright and festive, and an elegant bow on the back of her head will give the young woman’s business image a special flair. Tired of standard hairstyles? Then it's time to arm yourself with tapes, our instructions and inspiration.
Regular bow
This is the easiest way, but even it will help create a stylish look:
- We take a ribbon of any color and texture - satin, nylon or corrugated, the length does not matter.
- Comb the curls and tie them with a tight elastic band to create a beautiful tail. This is the basis for our hairstyle
- Take the ribbon you like and wrap it around the base of the hairstyle several times.
- We firmly fix the tape with a single knot. We take the ends, fold them in half, and then tie them together. Pull the free ends down slightly. Straighten it - and the elegant, albeit simple, bow is ready.
Double knot
For this method it is better not to take satin ribbons: Smooth and slippery, they hold double knots very poorly. Give preference to a nylon accessory. By the way, we will need a long ribbon. Let's get started:
- We make the base in the same way as in the previous version - tie it ponytail. If desired, you can collect not all the hair, but only the upper part, as for a “malvinka” hairstyle.
- We tie the ribbon with a simple single knot, and then tie a regular bow. Attention: about half the length of the tape should hang freely
- We take the ends of the ribbon and tie them together again. So, we got two bows, one on top of the other.
Triple length
This bow is also very simple to make, but looks more magnificent and elegant:
- We take a beautiful and definitely long ribbon.
- We collect our curls in a tight ponytail.
- Wrap the ribbon around the base of the ponytail and tie a tight single knot so that one end of the ribbon is approximately three times longer than the other.
- Bend the loose ends in half and tie a simple bow.
- Fold it again long end in half and tie with the short one.
- Let's straighten out our creation.
Braid with bow
You can decorate your braid with a bow by simply tying a ribbon over the elastic, but you can also weave it into your hairstyle. This option is more reliable and elegant. Take a tape at least a meter long. If your hair is short, we give preference to braid:
- We braid a regular braid, but not completely.
- We bend the ribbon in half and place the fold under the middle strand, and connect the ends to the outer ones. Imagine that the ribbons have become part of your hair.
- When there are a few centimeters left to the end, tie the ribbons with a single knot and tie any bow you like.
Gathered bow
The assembled bow requires a little more effort than the previous options. You will need not only manual dexterity, but also a needle and thread. But it can be used many times. We act:
- We take corrugated or smooth tape.
- We pass a strong thread along its entire length and simply pull it together.
- We sew the resulting miracle to a matching elastic band.
- We decorate any hairstyle with an elastic band with a bow!
Hairstyle is an integral part of a little girl. From a young age until school graduation, every girl's jewelry box contains many hair bows. The material and decor of this accessory can be found completely different. A satin ribbon bow adds elegance, sophistication and neatness to the look.
Many mothers, and, as they grow up, girls try to make decorations from a bow with their own hands. This is an interesting and always win-win solution.
To do something for a girl, you can contact the most simple options. Beautifully tie a satin ribbon onto the elastic band - the hairpin is ready. Just? No, tying a beautiful bow is not easy. Moreover, it must be secured. Let's show an example of several master classes on tying a bow, which even a schoolgirl can handle.
Kanzashi technique
A more complex option can be handled by middle and high school students with the help of their parents. The activity is interesting, but requires patience and perseverance. The bows made can be worn every day or for special occasions. We offer step-by-step instructions for sewing bows from satin ribbons. We decorate it with a flower using the kanzashi technique.
Materials and tools for making one bow:
- plain satin ribbon (we take white) 2.5 cm wide and 70 cm long;
- ribbon with an ornament or another color (ours is black with polka dots) 1 cm wide and 40 cm long;
- satin ribbon 1 cm wide and 9 cm long (ours is white) for making a flower;
- rubber;
- half bead;
- thread;
- needle;
- candle or lighter;
- ruler;
- scissors;
- tweezers;
- heat gun.
Let's get started step by step instructions. Let's prepare the tapes. You need to cut them into the following sizes:
- satin white ribbon 2.5 cm wide - 2 pieces of 20 cm long and 6 pieces of 5 cm long,
- satin ribbon 1 cm wide - 2 pieces of 20 cm long.
The preparations are ready. Let's start forming the parts. We apply black tape to a 20-centimeter white piece of tape. It should be located in the middle, as shown in the photo. We squeeze the edges with tweezers and process them with a candle or lighter.
We make the second part using a similar method.
Lightly overlap the edges of the tape one on top of the other. Sew with a basting stitch.
We do not cut the thread, we hem the 2nd part, the thread remains, it will still be needed.
Fold the ribbons in half. Mark the middle as shown in the photo.
Connect the fold line to the seam line. We sew with a basting stitch, but in the opposite direction.
Now the thread needs to be pulled and wrapped around the seam line several times. Secure with a few stitches. We cut the thread. The bow is ready.
Let's start making the bow. We will need prepared wide pieces of white satin ribbon in the amount of 6 pieces. We fold them at right angles, the ends should be the same length.
We fold the workpiece, connecting points AA and BB. We solder the petal blank at the corners. You don’t have to do this, but it’s easier to work with a soldered petal.
Fold the petal in half. The satin side should be on the inside.
Turn it inside out long side petal We seal the edges using fire. The petal is ready.
In the same way we make 5 more petals.
Using a heat gun, glue the flower petals together. The flower preparation is ready.
Let's start assembling. Glue an elastic band to the wrong side of the bow using a heat gun.
We attach the remaining white piece of thin white ribbon with hot glue to the middle of the bow. We make a double turn. This way the elastic band will not separate from the bow during use.
Glue a flower to the middle of the bow on the front side. We enliven it with a half bead or bead. The bow is ready!
Bow on a fork
An interesting and popular method of tying a bow is the method of forming a bow on a fork. The bows are small, but very neat and cute. They can be used to make elastic pins, crabs, clips and poppers. In addition, this bow can become good decoration for a postcard or as a gift, will decorate, for example, kitchen towel, or will add zest to a girl’s or woman’s everyday outfit. It's very easy to do. Below we will provide a detailed step-by-step mini-master class.
1. Bow made from folds. The ability to beautifully tie a bow on your head is a real art. Tie your hair with a ribbon so that one part of the ribbon is half as long as the other. So, to learn how to tie a bow on your head correctly and beautifully, all you have to do is stock up on all kinds of bows and ribbons. Tying a beautiful and neat bow is not so easy, it is an entire art.
From a very early age, girls love their mothers to tie them on their heads. beautiful bows. Girls turn into girls, but the love for bows remains. We fold the longer part three times, and use the short part of the ribbon to tie the folded ribbon. Now all that remains is to straighten the bow beautifully and enjoy the result.
There are many in various ways tie ribbons on your head to make gorgeous bows. You can use satin or organza ribbons, ribbons with sparkles and sequins. Create beautiful hairstyle with a bow it’s not at all difficult, the main thing is to know what exactly you want to do on your little schoolgirl’s head!
Catch both ends in folds and tie them in a knot, pulling the first knot one more time. Tie the remaining ends again. Straighten all the resulting “loops”. Make a gathered bow. Take any ribbon (satin, nylon, corrugated) and thread a strong thread along its middle suitable color, which you then tighten and secure.
For beauty, you can tie several ribbons of different colors. One of these extraordinary hairstyles is a hair bow, which you can easily make with your own hands, spending a little of your precious time. In addition, this hairstyle stays on the hair very well and does not require constant correction. 1. After you wash your hair, apply a special smoothing balm to your hair. Gather the lower part at the back of your head and tie it with an elastic band, preferably in a color that matches your hair.
Part of the hair on the back of the head needs to be combed a little, sprinkled with hairspray and divided into two parts. Attach each part to the halves of the bow, giving it a little fluffiness. Both halves of the bow are fastened with pins. 5. Comb the front part of your hair a little, smooth it with a brush and spray it with hairspray. Pull the wide strand back, thus covering the middle of the bow. Wrap the ends inward and secure with bobby pins.
You can make hair bows or other equally original hairstyles. The main thing is to always be stylish and beautiful! In this article we will look at several ways to make life easier for mothers. So, all you have to do is buy wholesale bows online and continue reading the article.
How to tie a bow on your head
Plus, this detail will make your image feminine and will cause affection among others. For experiments, you can take anything - bows, ribbons, elastic bands, and so on, it all depends on your imagination.
In this method, you can use ordinary tape. We fix the tail on the head with an elastic band, this will be the basis for further work.
How to make a lush hair bow
It is better to use nylon tape, which will give more pomp and volume. There are a lot of options, the main thing is to constantly try and try to do everything carefully and beautifully. This is a great opportunity to constantly change your image, make it unique, gentle and original. Be-in.ru is an online platform that contains the best things from Russian stores. And a magazine in which designers, store owners, photographers and stylists talk about the features of their work.
Both ends of the ribbon must be folded and tied in a bow. Wrap the ribbon around your hair, tie it in a knot, and pull tight. If you assemble the bow not with a thread, but with a fishing line, it will turn out more beautiful and voluminous. At the same time, fold the bow exactly in half. 3. Let's try to put a bow on the back of the head. Tying a bow is a whole science, and mothers must master it perfectly. Make the free ends of the scarf in the form of a wide bow in front and secure with bobby pins. Pass it under your hair and tie it like a headband.
