The hot summer sun is loved by many, but sometimes it can cause harm: hair burns under its rays, and an uncovered head can get damaged. sunstroke. Therefore, hats are no less relevant in summer than in winter. The most versatile is a bandana, which is easy to sew yourself.
To create a bandana with your own hands, you need to determine what kind of bandana it will be. Even this headdress has several versions. The simplest is a medium-sized square scarf, tied on the head and having a knot below the back of the head.
For such a bandana patterns with complex circuits not required - just choose an attractive piece of fabric, make a square with the required dimensions, trim the edges, and the headdress is ready. Classic options for a bandana square shape 63*63 and 70*70 cm are considered.
As for the choice of material, there are no clear recommendations. Today, bandanas are not only a sign of belonging to certain subcultures (bikers), but also an accessory that is on the list fashion trends. Therefore, they can be made from almost any material, including fur. Worth picking up for the summer natural silk: It does not overheat the head and does not slide off the hair. Cotton is also good in this regard. And for cooler weather, you can turn to knitwear, jersey, or even leather and wool. Knitted bandanas, which look interesting during the off-season, are also in demand.
In addition to the classic square pattern, a bandana can be created from separate pieces of fabric: for example, a rectangle with a ribbon, a cap with ends for tying at the back, or a wide rim with a ribbon. Those. The main feature of a bandana is not its shape, but the ability to tie it, since the name of the headdress comes from the Spanish verb meaning “to tie.” Moreover, the original version of the bandana was tied at the back 2 fingers above the eyebrow line, with the free edge of the product tucked under the knot. And today he switched to the lower hairline at the neck, which is in many ways more convenient. A bandana tied in pin-up style is 100% fashion accessory, which does not have protective functions. However, this does not make it lose its charm, and every woman should have one in her wardrobe.
DIY knitted bandana
Crochet bandana is an interesting headdress for women for the cold season. It can be made from any dense yarn, preferably containing wool. Approximately 100 g of it is consumed, but it depends on the expected size. Professionals recommend using hook No. 3 for work.
To find out the dimensions by which orientation will be carried out, the head circumference is measured. The radius of the circle shown in the diagram will be 0.25 of this value. You should start knitting with 6-8 loops, for each new row you remove 2 loops from 1. When the circle in diameter is 10-12 cm, rows with and without increases begin to alternate. After 12 cm in length from the center of the bandana cap, it is necessary to follow the turning knitting pattern, spreading the halves of the headdress, between which a slit will appear. On each side, a chain 20 cm long and 4-5 cm wide is created - they will become the ends for further tying. The edge is tied with a “crawfish step”.
A crocheted summer bandana may look more airy, the threads chosen for it are no longer so thick. And here you can resort to a different scheme, making a headdress of 2 semicircles, a long transverse ribbon and a middle strip. Here you will also need the head circumference value, but now you will need to calculate the radii of the semicircles and the size of the middle stripe. The latter is determined by eye, based on personal wishes. The optimal size for her will be 12-14 cm. Then the radius of the semicircles will be equal to the size of the head circumference, from which the width of the middle stripe is subtracted, and the resulting value is divided by 4.
Knitting semicircles is also done with 6-8 loops, the pattern is chosen arbitrarily: you can go with the simplest pattern, adding a loop to each row. Or you can knit from 1 loop 2 or 3 at once, in the next step, on the contrary, connecting 2 loops into 1 to get an openwork knitting. However, it is important to remember that the shape of the pattern is a semicircle, so the expansion must be present one way or another.
It is recommended to make the middle strip in the form of a long rectangle with the same pattern as the semicircles. The elements are connected using simple single crochets. After that, tying begins along the bottom, often using an elastic band or other tight knitting method, creating long chains (15-20 cm) that are located at the back.
Bandana for a boy: pattern and step-by-step instructions
For small child A bandana for the summer is a more comfortable headdress than a Panama hat. It can be made either by crochet, according to the previously discussed pattern, or from textiles. Whether it is oriented towards a boy or a girl does not matter: the pattern of the bandana remains the same. It is important to choose thin fabric, in width and length no less than 50 by 40 cm, soft linen elastic 3-4 cm wide and 17-20 cm long. You will also need sewing tools: needles, chalk, threads, scissors and pins.
This bandana will have 3 components. It is formed from a wide rectangle, which is the main part, and narrow tape, represented by a pre-prepared elastic band, which becomes an element that secures the bandana on the child’s head. It is enough just to cover the elastic with fabric, that same 3rd detail, so that its appearance fits into the overall color of the product. The edges of the elastic must be secured with a simple fine stitch. There is a little more work on the main part.
When cutting out a rectangle, it is important not to forget about the seam allowance on the outer sides: 1-1.5 cm is enough for this if the fabric is not loose. After this, the edges are processed with an overlocker or on a regular machine by folding them and zigzag stitching. It is definitely worth ironing the part at this stage so that distortions do not occur later.
Now you need to move on to the moment of assembly: turning both the large rectangle and the ribbon with an elastic band, the short side towards you, you should put them on top of each other. This is done so that the strip with an elastic band runs along the long side of the main part, and their corners are aligned. Here it is advisable to fix the parts together with pins, after which the edge of the main part is folded. The wrong side of it faces up, the strip with an elastic band is between the layers. The opposite long edge needs to be placed with the front side on top of the wrong side of the edge that is connected to the elastic band.
The last point with this side is that an “accordion” begins to be assembled from each edge from the free part of the main part. It is important to do it evenly so that on each side of the elastic you get the same number of folds-layers. After which they are carefully stitched by hand - the needle of the machine will not take such a thick layer. The whole procedure is repeated for the other end of the elastic band. Finally, just turn the bandana right side out.
Pattern of a bandana with a visor
A bandana with a visor protects not only the head, but also the eyes from the sun’s rays, which is important for all ages. Its pattern is not much more complicated than the previous options, so even a novice seamstress can cope with this task. There will again be 3 parts: the visor, the transverse line, which is the ties, and the main panel. Each is single-layer, excluding the visor: for density it should be sewn from 2 layers of fabric.
The selected material is folded in half, and each part is applied in the place indicated by the dotted line on the pattern to the fold line. The outline is done with chalk or, if the fabric is light, then with a pencil. Be sure to cut with a small (1-2 cm) seam allowance at the junction of the parts. The edges of the parts should be processed using an overlocker or a zigzag stitch. The middle zone and the transverse part are basted and sewn on a machine with fine stitching.
After this, the halves of the visor are folded with their right sides on top of each other and connected, but the seam is not cyclic: it is necessary to leave space to turn the part out. It makes the most sense to do this on the side that will be attached in the next step to the transverse line of the bandana, sewing to it. This completes the sewing according to this pattern. If necessary, you can make a more dense headdress by initially cutting out a double for each part and sewing them together, as was done with the visor.
Bandana is a fashionable headdress. The peak of its popularity was in the mid-90s, but even now this wardrobe item is actively worn. You can purchase such an accessory in a store, but it is much more interesting to make it yourself. Before sewing a bandana, you should familiarize yourself with the variety of models and materials. It is very easy to create a product with your own hands, and it will be a great pleasure to wear.
Before you make a stylish bandana, you need to choose the material. Linen or cotton fabric is ideal for work. In addition, you can use durable, slightly stretchy calico, chintz, cambric. Since the main purpose of this headgear is sun protection, the above materials perform this task perfectly.
However, this does not mean that other fabrics are unacceptable. Synthetic options are suitable for a product that is not planned to be used daily. But ideally it is better to give preference to natural fabrics. Chiffon and other thin materials should be taken into account last.
Product in classic version is a square of fabric. The size of the bandana depends on who it is intended for:
- for a child – 50 x 50 cm;
- women's – 60 x 60 cm;
- men's - 70 x 70 cm.
The above parameters are approximate sizes. If you create a product yourself, then in any case you need to make an individual pattern. There are the most popular types of bandanas:
- The classic one looks like a square scarf.
- The bandana with an elastic band is comfortable to wear and does not fall off the head.
- The version with ties is universal for all ages and genders.
- Bandana buff is a transforming model, made in the form of a tube made of elastic material. It can be worn as a classic piece, as a hat, hood or mask to protect your nose and mouth from dust while riding a bike or motorcycle quickly.
- A bandana with a visor is an interesting and multifunctional model. It is intended for summer, spring, autumn (depending on the fabric from which it is made). Most often, it has ties at the back to adjust the size.
Bandana buffWhen choosing a material, you should pay attention to the color. It is ideal if the color scheme of the headdress matches the tone of the clothing. For men, muted shades of blue, gray, brown, green, and burgundy are suitable. Women most often prefer light-colored products with unusual prints. A scarf made from light denim looks stylish.
Classical 
With elastic band 
With ties 
With visor Measurements and pattern
You can easily and quickly make a bandana yourself. You just need to prepare a piece of fabric of the required size with the desired pattern. Standard sizes headscarves for adults – 61 x 61 cm.
To obtain more accurate parameters, you will need to take head measurements. For example, you need to sew a bandana with your own hands for a child with a head circumference of 55 cm. To adapt the pattern, you only need to use a geometric formula familiar from school and calculate the diagonal of the square. The minimum length of the scarf will be 55: 1.414 (square root of 2) = 38.1 cm.
Thus, to sew a bandana with your own hands, you need to draw a pattern according to the required dimensions. You will need to add allowances of a few centimeters to the result obtained. After this, the selected fabric must be laid out on the table, using chalk and a ruler, set aside the length and width in accordance with the obtained measurement results. The result should be a square with allowances.
Required Tools
You don't need a bandana to make it. large quantity material or special tools. In addition to the fabric, you need scissors for cutting. Also, in this process, pins for securing the pattern to the fabric, chalk or soap will not be superfluous. A measuring tape is useful for taking measurements.
The actual pattern of the bandana will require a ruler, paper, pencil, and eraser. Consumables – threads in the color of the fabric. Depending on the model design, you may need additional elements, for example, an elastic band. For sewing you will need an overlocker. If you don’t have it, then you can get by with a regular sewing machine with different modes.
If a needlewoman wants to decorate a product, she may need transfer appliqués, regular or thermal. Bandanas for women are decorated with stripes, patterns, stones, fabric flowers, chains, and lace.
The nuances of tailoring taking into account the model
Exist different types bandana, you need to choose a model based on personal preferences. The manufacturing process is simple, even a novice craftswoman can handle it. All you need to do is take your measurements correctly and follow the master class step by step.
Classic square
The classic bandana is especially easy to make. It's essentially one large square piece of fabric. To create it you will need the following materials and tools:
- textile;
- scissors;
- threads;
- needle;
- sewing machine.
For a product with a side of 54 cm, first of all we draw a square of 56 x 56 cm on the spread fabric. Then we bend each side one by one by 0.5 cm, then iron it. We repeat the action again. Next, we sew each folded side with a basting stitch. All that remains is to sew the product on a typewriter. If you have an overlocker, then hemming the product is not necessary. The classic square head bandana is ready.
Transformer (made of knitted fabric)
The buff bandana is a transformable cylindrical model; it is worn not only as a fashionable headdress, but also as a hood or scarf. To make it you will need:
- knitted material of suitable size;
- scissors;
- needle;
- threads
To begin, you need to cut a rectangular piece of fabric. If the product is intended for a child, then the dimensions of the material should be 24 x 40 cm, if for an adult, then 100 x 52 cm plus an allowance of 1.5 cm. Next, you need to hem the edges of the bandana. Then fold the cut in half along long side inside out, sew. All that remains is to turn the product inside out.
The transforming model is put on the face with the hole of the cylinder. The remaining part covers the head and neck. It's very fashionable and stylish option, which is loved by young boys and girls. A handmade bandana buff will become not only a wonderful accessory, but also the pride of the owner.
With elastic band
The product with an elastic band is perfect as an accessory to summer dresses, sundresses. It is advisable to select natural material, light shades. For production you will need:
- 2 pieces of fabric (38 x 18 cm; 28 x 10 cm);
- scissors;
- needle;
- threads;
- elastic band 10-14 cm long;
- pins.
After preparing the materials and tools, you can begin to work. A smaller piece of fabric must be folded in length by 0.5 cm and hemmed with a hidden seam. Then you should sew the edges of the workpiece from the wrong side, turn it onto the face, insert an elastic band that needs to be stretched along the length of the fabric and sew with a zigzag seam at a distance of 1-2 cm from the edge.
Fold the second fabric rectangle widthwise into a fan and secure with pins. All that remains is to insert the edges of a large piece into the holes of the workpiece with an elastic band and stitch it together. A stylish summer headdress is ready.
Children's
The children's bandana is sewn from thin natural fabrics. The product for boys can be decorated with appliqués, for girls - with embroidery. To make a headdress you will need:
- textile;
- scissors;
- thread;
- needle.
First you have to make a pattern. To do this, you need to draw a semicircle with a diameter of 22 cm, a height of 6 cm, and two rectangular strips measuring 10 x 33 and 8 x 85 cm. The pattern must be transferred to fabric and cut out, leaving allowances of 1-2 cm.
A section of 10 x 33 cm is the middle of the bandana; the two resulting semicircles should be sewn to it and the edges should be processed. Next, you need to measure the circumference of the baby’s head on the product, and the half-circumference on the remaining part. Then you need to stitch the workpiece to the marks. All you have to do is turn the product inside out, sew on the ties, and the bandana is ready.
An original and easy-to-make hat will perfectly protect a child’s head from the sun. A bandana for a boy can be made from fabric with cars, ships, or favorite cartoon characters. Materials with flowers, dolls and other cute prints are suitable for girls.
Video
- This is a summer headdress in the form of a scarf. Very often, children's bandanas are equipped with elastic bands (to make it easier to put on) or visors (for additional eye protection from the sun). The advantage of a bandana is its simplicity. Such a headdress is easy to put on, can be cleaned (washed) without any problems, and is sewn without the slightest problem.
In this article we will talk about how to sew a bandana for a boy or girl at home. Believe me, this is easier to do than it might seem.
DIY children's bandana
To create a bandana with an elastic band according to our pattern you will need:
Please note that the sizes we indicate are designed for a head volume of 52-54cm. If the volume of the child’s head is larger or smaller than stated, the pattern should be adjusted accordingly.
Completing of the work
- A bandana pattern for a boy (girl) consists of three parts: two rectangles and an elastic band. Since our elastic band is ready, you will only have to cut two rectangles. Please note that on the outside of each part you should leave 1 cm (seam allowance). As a result of the allowance, the dimensions of the main part (larger rectangle) will be 42x26, and the side drawstring part (smaller rectangle) will be 28x7cm.
- We fold the small rectangle (smaller part) facing inward and pin it together using pins. After this, the part is stitched, with a distance of 1 cm from the edge (in this case, the threads must be secured). If there are excess edges of the seam allowances, they can be trimmed, but keep in mind that the free edge must be at least 5mm.
- After this, the small rectangle (drawstring) should be turned out and ironed. In this case, it is most convenient to place the seam on the side.
- Then insert an elastic band into the finished drawstring. To make this as simple as possible, you can use this device:
- After the elastic is inserted into the drawstring, its edges need to be fixed. The easiest way to do this is to simply sew them together at a distance of about 5 mm from the edge of the fabric.
- After all the parts are cut and processed, we begin assembling the product. To do this, a large rectangle is placed face down on the drawstring (the raw edge of the rectangle is on the short side of the small part)
- The second edge of the main part should be placed on top so that the drawstring is inside the “pipe” of a large rectangle.
- Then we turn the “pipe” so that the drawstring is along its edge.
- We turn the part over so that the chipped part is at the bottom.
- After this we begin to make an “accordion”. This part of the work should be done very carefully and carefully. First, we bend the edge of the part, placing it on top of the drawstring and the gathered edges of the rectangle. We check that our bookmark is equal in width to the width of the drawstring. If this is the case, everything is in order, but if not, mix the parts so that both widths match. For ease of work, you can pin the resulting “package” together with pins.
- We stitch the resulting “accordion”. Of course, stitching repeatedly folded fabric is not very convenient, but considering that our bandana is made of light fabric, it is still possible to do this. Then you should carefully trim off the excess edge of the fabric.
Bandana is a universal headdress that suits almost everyone. Initially it was used to protect the face and head from sand and scorching sun. Nowadays, it is not just a headdress, but also a fashion accessory. And these headdresses, instead of the traditional cap, began to be used in equipment by representatives of some professions, for example, a surgeon’s head is often decorated with a medical bandana, and a chef’s head is often decorated with a chef’s bandana. You can choose a bandana to suit every taste, in different colors and from any materials. Or you can sew it yourself.
- Classic. Square of cotton fabric. Both men's and women's are worn on the head in the same way. A feminine and practical option in the form of a narrow hoop that supports your hair. Which is very convenient during windy times.
- Transformer. At the back of the head it is gathered with an elastic band; the upper part can be unfolded like a hood.
- Bandana with ties.
- Bandana buff or trumpet. A universal bandage made of elastic material, popular among athletes. Can be used as a headband, scarf or face mask.
There are many ways to tie a scarf. For the classic one, you just need to fold the scarf into a triangle, throw it loosely over your head and tie it with a knot at the back of your head.
IN retro style. It is folded into a triangle, but the base of the scarf is located at the back of the head. The edges of the scarf are tied on top of the head, the tail is hidden in a knot.
Pirate version. A bandana folded into a triangle is applied with the base to the forehead close to the eyebrows. The ends are wrapped around the head and tied. Boys like this option. Female version of "pirates". Shawl folded into a triangle, but place the base of the scarf on the side near the ear. Tie the loose ends on the opposite side, forming a loose knot.
Except traditional ways, the bandana can be tied as a wristband. Fold the scarf several times until you get a tight rectangle and wear it on your wrist.
Around the neck like a cowboy. Fold the scarf into a triangle, placing the ends behind the neck. Make a small crease at the base of the triangle under the neck.
How to sew a classic bandana
The universal and most popular version of the headdress, which is preferred by men, is suitable for both women and children. The measurement for construction is the head circumference, enclosed in a square. Classic sizes for children are 50x50 cm, for adults 60x60 cm. And 70x70 cm for large sizes.
- Fabric square the right size+1 cm per hem.
- Scissors.
- Pins, needles and threads.
That's all you need to make a classic head bandana.. Fold the edges evenly around the perimeter of the prepared cut, forming a closed edge. Baste and stitch on sewing machine. You can wear such a bandana not only on your head, but also use it as protection for your face, on your arm, and even on your jeans.
How to sew a women's bandana with an elastic band
The main measurement is head circumference. The bandana pattern is made of two parts: the main part is 38 by 18 cm and the strip is 28 by 10 cm.
Hem the strip on the narrow side by 1 cm. Fold it face down, sew the long edge and turn it right side out. Insert an elastic band into the resulting ribbon. Its length should be 2 times shorter than the strip itself. Using several stitches, secure the elastic band in the ribbon.
Fold the main part like an accordion. Place the edge in a pre-sewn ribbon. Do the same with the other side. Machine stitch these edges. Women's bandana is ready! Made from light, bright fabrics, it will go perfectly with denim outfits and summer sundresses.
How to make a pirate bandana from a T-shirt
It’s easy to sew a bandana for a boy from a boring T-shirt. Cut a square from the prepared material, as for a classic scarf. Decorate with pirate symbols.
A more difficult option for a little pirate under 1 year old. To create a pattern two measurements will be required. Head circumference OG and length from ear to ear YU. In the example, the values used are Head Circumference (HC) equal to 50 cm and Length from Ear to Ear (EL) 34 cm.
The pattern consists of three parts
The cut parts are sewn in order. Sidewalls with a central part. Fold the tie part in half and attach it to the finished base of the bandana so that part of the base is hidden under them. Pin, baste and stitch. Decorate with pirate symbols or whatever the little mischief wants. Using the same principle, you can sew a headdress for a girl with a visor. Pre-glue the parts of the visor with non-woven fleece for density.
How to make a bandana-buff from knitwear
How to sew a buff bandana for sports and everyday wear? It's not difficult at all. This model can be sewn even from a boring T-shirt. For children the dimensions are 24 by 40 cm, for an adult 50 by 26 cm. To make it you will need a little more than a meter of fabric. Cut a rectangle twice the size shown. Fold in half and machine stitch. You can pre-process the edges with an overlocker. Made from warm material, this model will protect your face from frost and wind. And it won’t take long to persuade children to put on such an original hat.
A T-shirt would also make a great bandana for a girl. Cut two rectangles from the prepared material. Large for the base of the scarf 30 by 45 cm and smaller for a plank 8 by 10 cm. Gather a large rectangle from the short sides onto a thread and tighten it, reducing it to 3 cm in this way. On the second piece, on the narrow sides, mark the middle with chalk. Allow seam allowances of about 1 cm along the perimeter. Align both blanks on the right side, secure with pins and stitch. Insert an elastic band into the placket and sew it with a hidden seam.
From the proposed options it is clear that making a bandana does not require expensive materials, special skills or a lot of time. Worth choosing for children natural fabrics. Cotton, calico or chintz work well. Before sewing, the fabric should be washed so that it shrinks naturally. Men's and female models can be made of knitwear, denim and even leather. What to make a winter bandana from? It can be crocheted or knitted from warm yarn, or sewn from warm knitwear, suede or fur.
A bandana with a visor, of course, is possible just buy. The number of proposals, however, exceeds all reasonable limits. But making a bandana with a visor with your own hands is much more interesting. And if you use something that has fallen into disrepair, or just a boring thing, as a donor, it will be customization pure water.. The material “Master class on a bandana with a visor with your own hands” echoes the master class on cutting and sewing.
These master classes (bandana with a visor - budenovka) have something in common primarily in the sequence of presentation of the material. In addition, the materials used. In both cases, this is used cotton fabric. Well, because these hats are a wonderful gift! This determined the style of the bandana. It is a bandana with a visor that is most practical in terms of its use. There are simple rectangular scarves, which, when tied in a certain way, can already be called gangs. There are complex structures in the form of turbans. Yes, yes, a turban is also a bandana. Bandanas are worn tied around the arms. Dogs wear bandanas. Babies have bandanas, they are bibs. Cowboys sewed bandanas on as bandages to protect their lungs from dust... Bandanas were knitted, felted, and, of course, sewn. From knitwear, denim, leather...
You can cut out a bandana with a visor directly on the fabric. But when sewing another one, you will have to draw everything again. Therefore, it is easier to have its patterns. The most interesting way to draw patterns is in the “Valentine” pattern making program. On the website resource, the program itself for clothing patterns can be downloaded for free using the links in the articles:
- New release of the program for creating Valentine patterns
- Finished pattern of a bandana with a visor
Or find through search Online.
The chosen version of the bandana, with a visor, is very easy to sew. Even easier than cutting and sewing Zouaves...?
We cut a bandana with a visor
The pattern of a bandana with a visor is not parametric, unlike inBudenovka patterns. The parameters of a bandana with a visor will be determined by the person who will wear it. The adjustment is determined by the knotting. Let's change the dimensional characteristics shown in the example figure a little.
The program for creating patterns has been downloaded, installed, and launched.
We cut the head of the bandana
Using the “New” button we create a “bandana head” pattern.
Using the “Point at end of segment” tool, draw a line from point A to the right. The length of the line is 60 centimeters. Line type "Dotted".
Using the “Point at end of segment” tool, draw a line from point A upwards. The length of the line is 20 centimeters. Line type "Dotted".
Using the “Point at end of segment” tool, draw a line from point A2 to the right. The length of the line is 10 centimeters. Line type "Dotted".
The work with constructing points is completed. If you hold down the Shift key while constructing, then the angle can be constructed fixedly. It's comfortable. You can read about some techniques for working in the “Valentina” pattern making program in workshop.
Using the “Simple Curve” tool we connect points A - A3. Manipulating dimensional markers. There are two of them and they determine appearance lines.
Using the same “Simple Curve” tool we connect points A3 - A1. Use markers to change the shape of the curve.
Using the “Line between points” tool we connect points A1 - A. The pattern of the bandana head with a visor is ready. But not really. Only rendering has been done. Now in the pattern making program you need to design the part directly. A tool called “Detail” is used. It is located in the group of tools with the same name. The selection of the contour is carried out by a simple mouse click. If the lines were built taking into account one direction, then there are no problems. If the direction is different, then Shift is used when selecting lines as part of the contour. There is always a story at the bottom of the program window.
After pressing Enter, the part properties window will appear. Tabs will not be available. Or rather, the tabs will be accessible, but the details located on them will not.
If you simply click on “Ok” and right-click to call up the context menu in this pattern creation program, then in the “Options” item the situation will change dramatically. Details will be available. On the “Increase for seams” tab, set an increase in size of 1 cm. Click OK. The program will complete the increase and mark it with a gradient of gray dots.
We cut the visor of the bandana
We are building a canopy. To do this, we create another pattern in the “Valentine” pattern making program. We call it “Bandana Visor”. Point B will appear, from which the pattern of the bandana visor will be built.
Let's modify the visor, which is given in the original drawing. Let's make it not adjacent, but on the fly. Let's take the visor as a basis. Let's construct point B1 at a distance of 20 cm from point B.
Let's measure the middle of the segment B-B1 using the “Midpoint between two points” tool. Point B2 will appear
From point B2 we will construct point B3
Let's build point B4
Use the Simple Curve tool to draw the visor. Don't forget about the direction of drawing lines. It will be easier to construct parts in this pattern creation program if the lines are drawn in one direction. For example, clockwise.
By analogy with the head of the bandana, we also set the allowance for the visor. The pattern for the bandana with a visor is ready. It remains to be printed.
Pattern printing
To print a pattern for a bandana with a visor, use the mode for creating a layout of parts. It becomes available if there is at least one drawn detail. The layout can be exported to a file. This may be necessary if you have the option of printing outside your home. For example, in an advertising agency located on the other side of the city, which has a printing tool such as a plotter.
Often the patterns are large and you will have to manipulate the sheet format to fit them.
The patterns are laid out. It's time to print them out. The easiest way to do this is through “File” → “Layout” → “Save Tiled as PDF”. The result will be a PDF file with a pattern for a bandana with a visor. We do not print blank sheets. We glue the printed ones together. In order not to get confused, the program for clothing patterns will number the sheets and indicate the edges that need to be cut.
Cut it out
We cut out the details along the very edge of the patterns. After all, the allowances have already been taken into account.
Assembling a bandana with a visor
Assembling the head
Let's connect the parts of the head by folding them right sides together and stitching them together. The length of the stitched part is about 30 centimeters. A bandana with a visor must be tied. We will make a temporary connection of parts stationery clips. We put fastenings at the beginning and at the end of the line.
Let's overlay the cuts. Until the end of the line. There is a notch at the end of the line. After this, only one part will be overlaid.
We sew the seam with double stitching. This bandana with a visor is made of denim.
At the end of the line connecting the parts, we place a solid bartack across the seam.
Set aside the second half.
Double stitching.
A bandana with a visor is sewn as a gift. A gift for a person with a sense of humor. Therefore, light banter is only beneficial.
Assembling the visor
We sew together the details of the visor.
We cut out triangles to make laying out and stitching easier.
Collecting a bandana
Fold the head of the bandana and its visor, matching the stitching of the head and the mark on the visor. Let's strengthen it temporarily. Let's compose.
Tacks are required.
We overlay the lower cut of the head together with the visor.
Let's stitch this seam too. Double stitching.
Result
See you soon on the pages of the cutting and sewing website - “Sewing Circle”.
To main
Do you want to become an author and post your material on the resource pages? This is easier to do than you think... Send your application to: This email address is being protected from spambots. You must have JavaScript enabled to view it.
