Origami frog that jumps - wonderful craft. She will bring a large number of joy and fun.
In this master class we solved a whole pond of frogs. As a result, the child was able to organize real frog competitions and determine the winner among the frogs in long and high jumps.
How to make an origami frog? To make this craft you will need:
- colored cardboard and colored paper
- pencil
- ruler
- scissors
- PVA glue
- decorative material (for example, factory eyes)
Origami frog (simple diagram)
Cut out a rectangle measuring 13 x 8 cm from green cardboard.
Place it vertically, colored side down.
Fold the top left corner diagonally down toward the right edge so that the top edge is parallel to the right side. Press the fold properly. Unfold the cardboard (as it was).
Now fold the right corner diagonally down to the left edge in the same way. Press through the fold. Unfold the cardboard.
This is how you get a criss-cross fold.
Turn the cardboard over so the front side is facing you.
Fold the bottom edge perpendicularly up through the intersection of the previous folds. Press through the fold. Turn back.
Gently press your fingers on both sides of the last fold (the sides) and push it through.
Press the cardboard and once again push through all the folds that exist.
Turn our design around.
Fold the side corners up along the markings. Push through the folds. These will be the front legs of the frog.
Carefully fold the left and right side structures to the middle so that they lie side by side. Press through the folds.
Fold the bottom of the sheet up, 4 cm from the bottom edge. Push through the fold.
Now bend it down, placing the fold along the lower end of the front legs. Push through the fold.
Bend the same side up again, the lower edges of the folds should coincide. Press through the fold.
Now bend it down again (the edges match). Press through the fold. We should have an accordion.
Spread the front legs slightly and turn over.
The origami paper frog is almost ready.
Let's make a few more frogs in the same way.
We decorate frogs with factory-made eyes.
If they are not there, then eyes can be made from colored paper. We also cut out tongues from red colored paper and glue them under the muzzle.
For the lake we take blue cardboard.
We turn it face down and draw an arbitrary outline of the lake.
To make water lilies, take light green cardboard or colored paper.
Cut out the water lilies.
Glue them onto the lake.
We place the frogs randomly.
To play, you need to press on the edge of the frog's back with your finger and quickly release. The frog will jump and roll over.
In children's preschool institutions kids are introduced to the basics of origami - a special technique for folding paper figures without the use of glue or scissors. An origami paper frog immediately wins the hearts of kids. IN kindergarten and at school during breaks, children compete to see whose frog is the most jumpy, whose figure can somersault and jump the farthest.
The craft is made quickly and does not require any special skills. A kindergarten teacher, a teacher in class, or parents will tell your child how to properly make a frog out of origami paper. There are also many video tutorials on paper origami for beginners - a frog according to the diagram, step-by-step production.
From early childhood, the baby loves to play with paper. The child strives to create something new with his own hands. The simple figures that the baby tries to collect are usually animals. The first paper frog made by the baby does not yet know how to jump.
Children learn origami skills using simple models.
Let's look at a step-by-step diagram of an origami frog, simple for preschoolers.
- You will need a green paper sheet, for the eyes small sheets of black, yellow or white. Eyes can also be drawn with paints or felt-tip pens.
- The green square must be bent diagonally. Then bend the lower corners of the triangle towards each other. The corners of the triangle should intersect.
- The result was sharp corners. You need to bend them opposite to each other.
- Turn the figure over. Glue on eyes cut out of paper or draw them with felt-tip pens or paints.
You've got a cute little frog, and your baby has mastered the first folds using the origami technique, which will later help your baby create a jumping frog.
A preschooler can also make a tadpole out of paper on his own.
The craft also requires a square sheet of green paper.
- The sheet is folded diagonally twice.
- In the resulting figure, the upper triangle unfolds into a square shape. This is how the tadpole's head was formed.
- The tip of the lower triangle is bent in half to create a tail.
There are more complex models of “talking” paper figures. For example, “toad’s mouth.” Such a model cannot be made by a child 2-3 years old, but a preschooler over 4 years old can cope with creating such a toy. Models of finger wahs have become widespread. The finger frog model is a special form of transforming toy. The paper figurine of a boat can easily be transformed into a talking frog head.
Jumping model
To make an origami jumping frog out of paper, consider the diagram presented below.
For the classic model, a square sheet of paper is always used. For a frog, they most often take a double-sided green paper, although in nature there are yellow, red or sand-colored frogs.
The frog's back is painted with spots, you can draw eyes. In the simplest paper origami model of a jumping frog, the frog's legs are not formed separately. A novice origami enthusiast can make such a figurine. Students use worksheets for jumping frogs. The disadvantage of this material is its softness. To make the wah jump as far as possible, it is better to take glossy, thicker paper.
If the fidget incorrectly made a fold for the model, it is easy to redo it on glossy paper. A soft notebook sheet will no longer hold its shape after the fold is corrected. In order for a beginner to quickly understand how to assemble origami figures, it is better to use colored paper, where you can distinguish the front and back sides.
- The first steps always consist of forming the central folds: the square is folded twice diagonally.
- The folds of the future head of the figure are also formed on the upper half of the rectangle. First, the upper half of the workpiece is folded towards the center line, then this upper half is folded diagonally.
- The folds need to be ironed, using a ruler.
- The frog's head is folded along the formed folds.
- The resulting blank resembles an arrow with a sharp tip.
- The lower rectangular part is folded in half. These are the legs of a jumping model.
When you press the fold of the back with your finger, the frog will jump.
Classic model
The older the child gets, the more complex models he tries to make. For of different ages There are various patterns of frogs that can jump. A frog made according to the simplest design will be able to jump in place, but it will not be able to jump far.
Patterns with a large number of folds, additional elements, allow you to collect figures with better jumping ability. Such models can somersault in the air and jump long distances.
By following step-by-step instructions you can assemble the jumpiest frog
Step one.
Create a center fold. Connect the left to the right side of the square. The fold line should be on the right side.
Step two.
Diagonal lines and a midline are formed on the top square by folding the paper.
Step three.
Transform the top square into a double triangle along the fold lines. Bend the side lines towards you, diagonal lines away from you.
Step four.
A line is formed on the bottom square. The bottom side is folded in half. The line of contact is the bottom of the triangle.
Step five.
The sides of the resulting rectangle must be folded towards the center line. After that, another fold is formed on the bottom of the rectangle: bend and straighten the resulting part.
Step six.
The upper corners of the lower rectangle must be folded towards the middle, and then pulled to the sides. The lower part of the future wah became like a boat.
Step seven.
The frog's legs are formed: the ends of the upper triangle are bent upward. The ends of the boat go down and bend slightly to the side.
Step eight.
Bend the figurine in half, then turn away the edge. Turn it over. Jumping frog is ready to jump.
In order for the figurine to jump well and far, you need to carefully iron all the folds of the craft. A fidget can use a ruler for these purposes.
Paper figures can be made for pure pleasure, as well as professionally. In addition, this innocent hobby improves fine motor skills in children and adults, and helps to train not only imagination, but also accuracy and logical thinking. Children love animals and most often make them. Today we will look at two different ways creating a frog.
Origami can be not only static, but also have its own functions. For example, this frog will jump. The secret to the distance of her jump depends on her size, so she is quite capable of becoming a child’s favorite toy.
The first way to make a frog out of paper
To make it, we need a square sheet of paper, preferably green, and carry out the following manipulations:
- Fold the square sheet in half, turning it so that the fold line is on the right.
- Bend and straighten the resulting rectangle so that the fold line becomes visible.
- On the top square, you should also mark the fold line, so we bend it in half and bend the right and left corners to the opposite bottom ones. We will get two diagonal lines intersecting in the middle.
- Fold the top square into a double triangle, bending it so that the diagonals bend away from you and the side lines towards you.
- Fold the bottom square in half.
- Then, at the bottom rectangle, bend the corners towards the middle, even if they do not reach it slightly.
- Fold this rectangle in half again.
- Fold the top corners towards the middle and pull, giving the bottom a boat shape.
- Bend the ends of the boat to the sides.
- Bring the ends up on the top triangle.
- Lift the part with the legs up and bend it down again.
- Now you can turn the frog over and click on the ledge to make it jump.
The second way to make a frog
Video lessons
Wondering how to make a frog out of paper? But the choice of techniques is varied. You can make a three-dimensional frog from a cone, paper strips and rolls, using cardboard sleeves, origami. For your convenience, all the works are collected here, with links to a step-by-step master class. Choose, watch and make the most popular in children's creativity character.
How to make a frog out of paper? What techniques are there?
Frog made from rolls
One of the most popular techniques is to create different characters by rolling rolls. The frog consists almost entirely of paper rolls of various sizes. It will not be difficult for children to make such a beauty, especially since some details can be simplified, for example, cutting out the same 4 simple legs, instead of a cut roll from the bottom.
Volumetric frog
Its volume is created by 4 parts glued together, precisely following the contour of the body. The body itself with paws is flat. A template is attached to the review, thanks to which the work will go like clockwork.
The step-by-step master class is presented under the title -.
Paper strip frog
The most popular technique, having mastered it once, children will be able to create a great variety of different animals, birds, and decorations. The main thing is to cut out thin strips and glue them sequentially in one place or in a circle.
Step-by-step instructions in the review – .
Paper cone frog
A craft for the little ones, as it involves a minimum of action and effort. If you know how to deftly roll halves or quarters of paper into a little bag, you can make many characters for a fairy tale. And, as you know, the most the best toys are for children those that they made with their own hands.
Check out step-by-step master class – .
How to make a frog out of paper, or rather a frog
Until now, frog bodies have been popular bases that require some diligence to create. The body of this frog is a strip of paper folded in half. The remaining details in the form of a round head, eyes and paws are a matter of a few minutes, given that children can make paws in a lightweight version, in the form of a strip with three-toed discrepancies on one side.
Frog from a sleeve
From the sleeve from toilet paper You can make a wide variety of frogs. There are very simple variations where eyes and stripes bent into paws are glued onto a wrapped green roll. And there are more complicated ones, as in this version, but the appearance of the frog is much more beautiful and perfect. Moreover, to make the task easier, the master class includes a template.
Origami jumping frog
The most difficult of the above methods of creating a frog, since you need to carefully follow all the steps, of which there are quite a lot. But still, the jumping frog is popular, and has not lost its relevance for many years.
Pencil holder in the form of a frog
Despite the fact that the article is on the topic of how to make a frog out of paper, I would also like to include this work in the list. The work uses not only paper, but also waste material– a tin can, thanks to which the craft also acquires usefulness. This pencil holder will decorate your desk and hold pencils, pens, and markers.
The Internet portal has a huge selection of photographs illustrating step-by-step instructions for making frog crafts.
What can you make a frog from?
The materials that can be used to make frog crafts are so diverse that everyone can realize their wildest fantasies. These are fabric base, plastic products, CDs and the most popular material - paper.
Beautiful frogs with your own hands
In order for your frog to turn out beautiful and neat, you need to carefully study step by step instructions for its production. One wrong fold, one uneven cut and the whole craft will turn out awkward and unattractive. Detail to detail, straight folds, precise lines - and your frog is ready!
Method number 1. Frog is a jumper
To make a frog craft with your own hands at home, we need white or colored paper. This material is the most used, practical and in demand. Any will do, but our frog made from thicker paper will be stronger.
The usual format of any sheet is a rectangle, but we need a square sheet. To get a square, we just need to bend the paper diagonally into a triangle shape. We cut off the remaining, unnecessary part of the sheet.
We already have one diagonal fold, now we make the same one on the other side of the sheet. First we fold two corners that are nearby, then we also do the same with opposite corners of the workpiece. We bend the intermediate sides of the resulting figure inward on both sides. You should get a foldable double-sided triangle.
We bend the two corners at the base of the upper triangle towards its apex. We bend the bent corners again in the same direction.
We bend the corners remaining after our manipulations away from each other towards the edges of the workpiece and place them on top of the small triangles. We have the frog's head almost ready. The resulting small triangles will serve as the eyes of our frog. You can glue white paper circles on them or draw eyes with a black pen.
We turn our workpiece over and bend it in half. We make the following creases in reverse side from top to bottom. As when forming the frog's head, fold the paper to the outside again. This is how we get the legs of our future jumper.
We fold our entire craft in half and once again bend a small section in the other direction. We fix our folds with a heavy object so that the shape is preserved.
Our frog is ready. If you wish, you can color it or cut out appliqués and stick directly onto the figure.
You can make a craft easier and faster using diagrams for folding paper frogs, which will show you step by step all the operations involved in making it.
Method number 2. Funny frog
We present a master class on making frog crafts from colored paper for kids who still find it difficult to master the origami technique.
To do this job we need:
- glue (liquid or pencil);
- scissors;
- colored pens (gel based);
- ruler;
- colored paper (green);
- squared paper;
- simple pencil;
- some white paper;
Let's get to work
First of all, we need to prepare a pattern for the body and head of the frog. The size of our pattern is 7*14 cm. We cut out two small circles for the eyes measuring 2*1.5 cm. We also cut out the front and back legs for the craft.
We begin to cut out the main parts according to the pattern. For this we use green paper. We will need one body, one head, two pairs of eyes.
We cut out one pair of larger eyes from green paper, and a pair of smaller eyes from white paper.
We roll two rectangular pieces of green paper and glue them together into two cylinders of the same size. These are our torso and head. We also glue these parts together. On the head we draw a smiling mouth with a red pen.
Glue small circles of white paper onto large circles of green paper. In the white circles we draw pupils with a black pen. These are the eyes of our frog. We put them on the head with glue.
Simple paper frog
This craft option is the simplest and most accessible for young preschool children.
We will need paper in green, white, red and black. We also need a sheet of paper from any light shade for the base on which we will glue our frog and glue.
Cut out a round piece from green paper using a regular medium-sized tea mug. Then, cut out four circles: two larger ones in white and two smaller ones in black. And lastly, we cut out a narrow, not long strip of red paper for the frog’s tongue.
Glue black ones onto white circles to create eyes. Next, place a green circle on the base sheet and glue the eyes onto it. The result is the head of a frog. Draw her a smile with a black or red pen and glue on a tongue twisted at the bottom in a spiral.
Photo crafts frog
