How to cut bangs at home. How to cut bangs and create a beautiful hairstyle at home. Haircut technology is quite simple

Hair is a symbol of beauty. What women don’t do with them to look stunning. Coloring, curling, styling, braiding - these are just the basics of working on your hair. The full arsenal is much richer. Today we’ll focus on how to cut your bangs yourself.

What suits whom?

Many hairstyles look incomplete without bangs. Different styles coexist harmoniously only with certain shapes that differ in length, thickness, and angle of inclination. Girls who like to experiment can try to create the desired version at home. The lucky ones who have already been to a stylist and do not want to adjust the length of their bangs every month should learn how to do it correctly in their own bathroom.

Before you pick up scissors, you should understand what is beautiful for you and what is not acceptable:

Basic rules for working with bangs

Let's reveal important nuances in working with facial hair. You will need a number of hairdressing supplies:

In addition to preparing everything you need, it is worth deciding on the desired end result, deciding what the hair cut line, length and shape will be. Use the scissors carefully to avoid scratching your face. If you're not sure you'll get into right size, then you can cut dry hair (wet hair will shorten after drying).

Haircutting techniques

First, let's look at how to cut side-swept bangs step by step:

To give the image a natural look, you can make a thinning or textured option. In the first case, you will need special scissors with a cut on the blade. They must be operated at a distance of no more than one and a half centimeters from the edge.

If you don't have scissors, use a razor blade. Divide your bangs into five sections. Twist each one into a tight rope, treat the edges of the workpiece at a distance of about a centimeter with a blade, directing it correctly (angle about 30 degrees) and very carefully so as not to remove excess hairs. Delete only upper layer a tourniquet, thinning it towards the edge in the shape of a nail or needle.

Textured or jagged edges can be achieved by guiding the blade towards the edges of the bangs in a nearly vertical position. To do this, gradually pull the bangs over the crown, removing excess length at a small angle in the form of a herringbone in centimeter increments. After finishing the haircut, go through with thinning scissors.

If everything is clear with this technology, then we’ll figure out how to cut bangs to the side.

There are several options here. The simplest one is done like this:

1. Make an exactly straight cut one centimeter longer than the desired length, since when combing the curls to the sides, the strands will become shorter.
2. Divide your bangs into two parts with a side parting.
3. Cut strands a centimeter wide from the parting at an angle of forty-five degrees to a height of one and a half to two centimeters so that the bangs look beautiful.

You can do the same option as in the pictures. To do this, immediately separate your bangs with a side parting and cut each half separately.

You can make a very original side styling as follows:

1. Divide the front of your hair into three zones (the middle one should be a little larger).
2. Trim the central one, moving from bottom to top, making a side bevel.
3. Profile the middle at a distance of about two centimeters from the tips.

A few important secrets

It is advisable to thin out side bangs, especially if your hair has a thick structure. This is the only way you will achieve a natural look.

The final check of your work can be done after washing your hair and styling your curls. Then visible defects will come out. Correct them with scissors.

Under no circumstances cut straight bangs with the idea of ​​making them oblique, since it will be difficult to change the straight line and you may not be able to guess the length.

For aces who cut their hair on their own, this is not the first time, we offer little secret. Divide your bangs into two parts horizontally. Make the top one one to two millimeters longer so that the hairs curl beautifully under the bottom.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -185272-6", renderTo: "yandex_rtb_R-A-185272-6", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; , this.document, "yandexContextAsyncCallbacks");

Bangs are a fashionable trend in haircuts, since they make the image more attractive. It also allows you to change your image. It is not necessary to visit a salon, because you can cut your bangs yourself at home. It is necessary to familiarize yourself with some features of the work in order to do it correctly. You can cut your bangs not only for another person, but also for yourself. There are many types of bangs that are chosen according to the type of face. You can make a beautiful oblique bang or a semicircle.

How to cut bangs at home

If you don’t want to visit the hairdresser, you can cut your bangs at home. You just need to familiarize yourself with the main types and features of the work. Those with curls can get bangs, but remember that they will require daily styling and straightening. You can also make bangs from developing hair at home, you just need to follow some tips. This applies to work that will result in an oblique bang or a semicircle.

At home, you need to collect moisturized hair in a ponytail. To do this, you can apply water to them with a spray bottle or use styling foam. It is necessary to mark the border of the eyebrows. Then you should go a little lower and calculate the line of the bangs. The remaining strands should be collected. Hair should be cut in small strands, moving from the edges to the central part. The bangs are created around the face.

While working, the scissors should be held at a 45-degree angle, which is what hairdressers do. As a result, curl growth can be taken into account, and the treated strands will be natural.

When it’s the turn of the central part, you need to go through the same way again from the opposite side. Then you need to comb your bangs using a comb with small teeth. The result will be some volume. If there are deficiencies, they should be eliminated immediately.

Process Features

You need to remember that dry bangs will be about 1 cm shorter. At home, you can make bangs yourself. To make it look beautiful, you need to make the edge even, and the difference should be about 3 mm. If it turns out this way, you will get a beautiful bang.

It is best to work with dry hair during standard styling. Bangs will perfectly match your face shape with your everyday hairstyle. It is advisable to choose professional tools, since they are less likely to damage your hair. It is best to cut the strands a little until you get the desired result.

Types of bangs

At home you can make any bangs: oblique, straight, semicircular. They are divided into 2 groups:

• Structural detail. It is created during the design of the entire haircut, when the hair is completely cut. To complete the work, you will need to comb out and create an edging line. After it grows back, it will need to be shortened, and this work is not difficult to do. It should be combed the way it was before the haircut process. At the end you will need to create a border.
• Independent detail. You can create bangs at home separately from your hairstyle. It is performed separately from other curls, which come in different lengths.

Bangs parameters

Before you make bangs at home, you will need to familiarize yourself with its parameters. The width is the distance from the right to the left sides. It should not affect the temples. But there are exceptions when certain types of haircuts are created.

First you need to separate the curls using a triangular, U-shaped parting. The thickness can be selected as desired. It must be remembered that the thickness of the bangs affects the reduction in the mass of the rest of the strands. Therefore, the haircut should be done taking into account the density of the curls.

Work principles

To work you will need:

• scissors for hairdressing;
• thinning scissors;
• comb with small teeth;
• clamps.

With these tools you can create beautiful bangs at home: oblique, straight, semicircular. To make the work process easier, you must first comb your hair well, pinch it with your fingers, pull it towards the bridge of your nose and carefully cut it off. To do the job accurately at home, you will need to consider the process in detail.

If your hair is the same length, then you need to use the following tips. There is no need to clearly highlight the outline of the bangs. It goes well with curly and thin curls.

• It is necessary to moisturize your hair.
• Then you should separate the area of ​​the bangs using a parting, and use clips to secure the rest of the hair.
• It is necessary to comb out the first strand and cut it in the desired place.
• Using a horizontal parting, a strand is separated every 1 cm.
• After grabbing the control strand, you need to cut both at the distance of the first cut.
• Then the curls are combed and cut according to the appearance of the control strand.
• To create a cut, the teeth are used.
• Finally, you need to comb the curls and create a border.
• Thinning can be done upon request.

To competently perform the work yourself, you will need to use the following recommendations:

• Since wet curls look longer than dry ones, it is best to cut your hair after your hair is completely dry. And wet ones should be made longer.
• While working, you should not pull the strands too much, as this may result in an uneven cut.
• Before work, you need to pin up the rest of your hair so as not to spoil it.
• If professional tools are not available, then ordinary sharp ones will do. It is advisable to cut only hair with them, and then they will not become dull for a long time.

Bang care

The rules of care are very simple, as with all hair. It is necessary to keep your hair clean and healthy. If there are problems with the section, then this is immediately visible in the bangs. It is better to eliminate this problem immediately so that your hair is beautiful and well-groomed.

It is useful to use care products: shampoos, sprays and masks. It is best to prepare them yourself from natural ingredients. Mousses and foams are used for styling. Required daily care so that the appearance is always neat. To straighten your curls you need to use special cosmetics. You need to use styling tools and products infrequently, because they spoil the structure of the strands.

Why do you dream about bangs?

Each fashionista decides for herself whether to have bangs or not. Moreover, it often appears in the subconscious, that is, in a dream. Why she dreams, each author gives his own interpretation. Therefore, it is necessary to familiarize yourself with the basic concepts of its appearance in a dream.

• Why dream of growing bangs? – To diseases of relatives.
• Lush bangs are a great blessing.
• Why dream of disheveled bangs? - To the difficulties in family matters, as well as in business.
• Gray hair means trouble.
• Why do you dream about cutting your hair? - Bad news.
• Overwhelm – fatigue from love relationships.
• Why do you dream about drying your bangs? - To joyful events.

If you dream of bangs in any form, then they do not foretell anything terrible. Each dream book may have different interpretations.

The bangs are the decoration of the image. Whether to do it or not, everyone decides for themselves. When choosing a hairstyle with this element, you must do everything correctly so that the hair is neatly styled.

Bangs - How to cut bangs yourself

Bangs are the most important detail of the hairstyle and the image as a whole. By changing it or growing it, you can change a person’s appearance beyond recognition. Unlike your entire hairstyle, you can cut your bangs yourself. It is important to adhere to some rules. If you do not follow them, you can seriously ruin your hairstyle and aggravate some of the flaws in your appearance.

What types of bangs are there?

There are two main groups of bangs:

Thickness and width

The width of the bangs is the distance between the right and left bulges of the forehead. According to the rules, she cannot go out for whiskey, although, of course, there are exceptions. Before cutting the bangs, separate the hair with a triangular, U-shaped or parallel parting to the hairline. The thickness of the bangs depends entirely on your preferences. But we should not forget that the thicker the bangs, the less hair will remain in the main part of the hairstyle. You need to base it on how thick your hair is.

Bangs cutting technology

Tools needed to cut bangs:

1. Hairdressing scissors with straight blade;
2. Thinning scissors;
3. Comb with fine teeth (comb);
4. Clamps.

To facilitate the further process of cutting bangs, carefully comb the hair, pinch it with two fingers, pull it to the level of the bridge of the nose (or to the level of the nose - depending on the future length) and cut it off.

Before you cut your bangs correctly and beautifully, you need to choose the shape, length and thickness of the future bangs.

For those with a round face with soft features Graduated bangs work well. When doing this, you can cut your bangs short, but you need to keep in mind that they can emphasize wide cheekbones and a high forehead. A beautiful oval and regular facial features will decorate the classic version of straight bangs. And lush, naturally curly curls will be well complemented by tousled and airy hair.

You should not cut too thick and symmetrical bangs, because... this will complicate its installation. On thin hair, it is advisable to separate the strand from the crown - this will give the hairstyle the desired volume, and the haircut should be short if possible, and the bangs themselves should be straight.

You can create a huge number of hairstyles with bangs. We advise you to learn about evening hairstyles for medium hair with bangs.

Smooth bangs

How to cut your bangs evenly:

1. It’s not at all difficult to make straight, straight bangs yourself. To do this you will need scissors, preferably professional ones, a comb and a mirror;
2. Separate a strand of hair intended for bangs;
3. The width of the bangs is limited by the width of the forehead, without going beyond the left and right frontal convexities. Determine the thickness yourself, taking into account own preferences and hair thickness;
4. Pull the rest of your hair back and pull it into a ponytail;
5. Comb the strand intended for bangs over your face and divide it into 3 equal parts;
6. Pinch one of them between your index and middle fingers and pull down;
7. Try to hold the scissors at a 45-degree angle and cut the hair with fine teeth. Do not try to hold the tools at a right angle, the blades will slide along the hairs and, as a result, the bangs will turn out uneven;
8. Repeat the procedure with the remaining parts of the bangs, removing unnecessary length;
9. Comb your bangs well with a sparse comb and adjust the remaining long strands;
10. Next, take the scissors at right angles to the hair and slowly grind off the small teeth resulting from the haircut from right to left;
11. Wet your bangs and comb thoroughly. Pull the curls, pressing them to the frontal part, and remove all imperfections with small cuts;
12. Dry your bangs, loosen your hair and evaluate the result. Adjust if necessary.

Now let's look at how to cut sideways and torn bangs yourself.

How to cut side bangs yourself

To create an oblique bang, the same method is used as when creating a straight and even one. The only difference is that the excess length is removed not parallel to the floor surface, but in an oblique line.

The angle of inclination and direction of the bangs are chosen arbitrarily. The most important thing is the beginning of the haircut; you need to cut the strands from the top, gradually moving downwards, i.e. you should move from the shorter edge to the longer one.

It's quite common to cut side-swept bangs when doing. Although in such cases they usually turn to a specialist.

Torn bangs

The basic principle of cutting the so-called ragged bangs is to cut the hairs with teeth. With scissors you need to go deeper into the bangs, and the teeth should be located at different levels. Their length and depth are arbitrary and depend on your wishes. But it is worth keeping in mind that large teeth look better on thick and deep bangs.

Video on how to cut bangs at home

The process of cutting your own bangs. All the nuances of the haircut are described in detail, as well as impressions of the haircut after some time.

One of the options for cutting bangs. Before cutting your own bangs, think carefully!

How to cut bangs, one of the most original elements of a hairstyle, the decision is up to you, but do not forget that you need to choose its shape in accordance with external data. If you make the right choice, you can bring your facial contours closer to the ideal. Haircuts with bangs have unique properties

When choosing shoulder-length haircuts with bangs, the hairdresser diagnoses the hair structure, takes into account the type of appearance (summer, winter, spring and autumn) and skin type, since the presence of excess subcutaneous fat on the forehead will cause the hairstyle to quickly become “stale.” How to cut bangs is a matter of individual choice, but you need to focus on your face shape, the main criterion when choosing a hairstyle.

Bangs: choice according to face shape

It is known that the ideal face shape is considered oval. For girls who have such a gift from nature, a hairstyle of any shape, thickness and length will suit them.

Women's eyebrow-length haircuts will make your look gentle and mysterious.

This way you will emphasize the beauty of your eyes.

Oblique bangs in an arc will demonstrate your sophisticated business taste, and for girls whose choice fell on a bright, defiant style, options with the shortest and most beautifully “plucked” bangs are suitable.

How to choose the right hairstyle for girls with a round face? In this case, you should choose long and oblique bangs; it will visually elongate the rounded shape of the face and make it more sophisticated. Graduated strands are also acceptable; due to the effect of torn ends, they will lighten the image and soften rough features.

Girls with a square face shape are recommended to have asymmetrical haircuts; they will help create more harmonious proportions and visually narrow the face. Bangs will be the main trump card in your style. It can be asymmetrical and long, below the chin. It can be pinned up, let out, or even braided into pigtails.

Girls with a triangular face should choose a cascading haircut to round off a sharp chin using hair and different types of bangs.

We can handle it ourselves

So, how to cut your bangs evenly? Straight bangs are the most popular and favorite shape of many girls. It seems boring only at first glance. Types vary depending on the desired length. It can be on the eyebrow, creating a mysterious image, or super-short, daring. The width is selected in accordance with the width of the forehead.

You can cut your bangs yourself. Before starting work, you need to prepare the following tools:

• straight scissors;
• thinning scissors:
• peignoir or cape;
• hair clips;
• spray bottle with water;
• scallops

The choice of scissors determines how well the haircut will be performed. Scissors not intended for hair are not only inconvenient to work with, but also almost impossible to make an even cut.

It’s quite easy to cut your bangs evenly at home, the main thing is to follow the recommendations:

1. You need to choose a room with good lighting and place your tools in front of the mirror for your own convenience.
2. It is recommended to cut only clean hair.
3. First you need to separate the bulk of the hair from those that will be cut. We secure the hair with clips so as not to inadvertently cut off an extra strand.;
4. Wet your hair with water.
5. Divide into several parallel parts with a horizontal parting.
6. Comb thoroughly with a wide-toothed comb so as not to miss a single hair.
7. Select a small strand of one of the layers, hold it between your middle and index fingers and, pulling forward, cut to the required length. This strand will be the control.
8. Cut off the rest of the hair, holding the scissors at a 45-degree angle.
9. Then comb the comb again in different directions to identify stray hairs and cut them off.
10. To see possible imperfections, wet your hair with a spray bottle and comb it well with a fine-toothed comb, pressing the bangs to your forehead. This way you can correct the unevenness.
11. The final stage will be thinning the already dried hair - you need to lightly walk along the ends, thereby making the volume less massive.
12. Dry with a hairdryer and comb.

Haircuts with bangs will always remain in fashion, and you can make your own bangs at home, which will save you from unnecessary waste of money.

Torn bangs

Particularly difficult is the question of how to cut ragged bangs. In fact, everything is quite simple: first you can cut your hair evenly at the required level, and then carefully thin out a couple of strands and make a deep thinning. This will make it easier to style your bangs, and they will become obedient in your hands. Haircuts with bangs are chosen mainly by girls who strive for practicality; such an asymmetrical shape will fit perfectly with their requirements.

A child's bangs are usually cut quite short, then they reach the length of the eyebrows. You shouldn’t let it go any longer: ophthalmologists warn that this can harm the baby’s vision. Classic option Children's bangs are considered straight.

The most fashionable haircuts with bangs in 2015 are undoubtedly the shoulder-length cascade and bob, textured or simply short.

You choose how to cut your bangs correctly: straight or oblique. Every girl at least once in her life decided to decorate her face with this simple and elegant hairstyle element. Remember: if you decide to cut it yourself, stick to the general rules and over time hone your skills to perfection.

How to cut side bangs? This question interests many girls. Well-groomed hair is one of the main components of an attractive and harmonious image. Different hairstyles, cuts and styling can determine social status and even sometimes the woman’s professional affiliation, so hair can be called business card in the women's community. By the way, sometimes a woman’s position in society was determined by the length of her hair.

Stylish clothing is not complete without properly tailored fabric, otherwise the dress will sit askew and awkwardly. It’s the same with haircuts - how can you do a good hairstyle and styling if your hair is cut poorly. Many haircuts involve bangs - straight, oblique or milled. But it often happens that there is no opportunity to visit, but you want to change your image a little right now. It’s not scary, then a little about how to properly cut side-swept bangs at home.

But in order to cut bangs, first of all, you need to decide on its shape. The hairstyle needs to suit and be a decoration.

How to choose a bang shape

The easiest and most correct way would be to choose a haircut shape in accordance with the shape of your face.
A vertically elongated face, that is, oval or rectangular in shape, allows you to choose almost any hairstyle. Girls with this face shape are in the most advantageous position; both straight and milled bangs will suit them; a soft transition from the main body of hair and a sharply defined edge, torn strands and cut patterns along the edge will look good.
For those with a triangular-shaped face, the choice narrows a little. For them, the classic oblique bangs are more suitable, which descends in a smooth oval from the crown of the head and, lying on one cheekbone, slightly smoothes out the proportions of the face.
For round or square faces good option there will be short oblique bangs. It starts a couple of centimeters from the hairline, but it can end in different ways, either at the eyebrow level, or smoothly go to the cheekbones. It is advisable not to mill such bangs; it is better that its edge is clear and even.

Not only the shape of the face, but also the type of hair, lifestyle, in general, a number of factors will help to correctly determine the type of oblique bangs.

Romantic natures who cannot imagine their life without all kinds of ruffles, hats and blouses, lovers of flowing dresses and feminine style, a smooth oblique bang will do, which will fall in an even semicircle on the face and end in large, smooth and shiny curls. Such a fairytale princess.
If your hair naturally curls into curls, then your hairstyle can only benefit from this; you don’t need to spend time styling and curling every morning. But in this case, you will still have to straighten the bangs with an iron so that they do not curl along with the entire hairstyle.

For active business women or for girls who do not have time for long styling, easy-to-care short, milled oblique bangs are suitable. It does not require any special equipment or methods; just comb it and lightly straighten it with a hairdryer or straightener - and the hairstyle looks amazing.
A short haircut with long bangs will suit bright and creative people. It does not have to have a clear and even contour; cutting such oblique bangs yourself will not be difficult. A torn, uneven edge, stray strands will create a kind of creative chaos in the hairstyle.
The bob with sleek, side-swept bangs that go straight out has been a favorite for many seasons. This hairstyle looks good and is appropriate for any event. And here cascading haircuts good for everyday wear, you can create many beautiful styles with them.

How to cut side bangs

Rules for properly cutting side-swept bangs at home, which you should follow in order to do without the help of a stylist and get a new stylish look:

1. You should definitely have sharp hairdressing scissors in your arsenal. It’s better to spend money on them once, because ordinary stationery can ruin the result so much that no professional can save you later.
2. The cutter, as a rule, has a clear understanding of the shape and line of the haircut. And in order to be better visible, the hair needs to be slightly moistened and combed.
3. Wet hair is tricky; you need to leave your hair a little longer, because after drying it will shorten.
4. We cut the hair only after the shape of the future bangs is clearly defined in the head. It’s better to have a photo or drawing.
5. To ensure an even edge, the hair is combed with a comb and pinched between the middle and index fingers, so it will definitely not move when cutting.
6. If you want a smooth edge, then basically that’s it, you’re done with the haircut.
7. For thinning, the hair is also pinched between the fingers and lightly cut with scissors directed along the length of the hair.
8. If you have thinning scissors, the task will be simplified.
9. Now you can dry your hair and touch up the final look. The side bangs are ready.

Conclusion

New knowledge about how to cut your bangs yourself can be consolidated in practice and delight yourself and others in a new way. For achievement better effect you can create a beautiful hairstyle. And for this it is better to have foams, varnishes or mousses until the hair gets used to the new shape.

Bangs largely determine a girl's appearance. It looks best on girls with thick, straight hair. Someone suddenly decides to give themselves bangs, getting rid of a certain part of their hair, someone grows their hair long and painfully, and then suddenly realizes that it was better before. One way or another, almost every girl wore her hair with bangs. This is very convenient, and many of the fair sex believe that hair tied up in a bun or ponytail looks much better with bangs.

To implement such an idea - to get bangs - it is better to go to a beauty salon, where professional hairdressers will take care of your hair. But many representatives of the fair sex decide to cope with this task themselves and boldly pick up scissors. This option is much cheaper, and if you do everything right, it will turn out just great. We will tell you how to properly cut your bangs yourself, so that you end up with a beautiful hairstyle, and not the symbolism of a cardiogram on your forehead.

Basic rules for cutting your own hair

Before you begin the haircut process, you should familiarize yourself with some rules and nuances.

• To achieve a high-quality haircut, you cannot do without professional scissors. You will also need hair clips, a regular comb and a comb.
• You need to cut your hair yourself only in good lighting, it’s great if this lighting is daylight. IN otherwise when you come into the light, you will see how many mistakes have been made and how many strands have been missed.
• When preparing to cut your hair, place a small container of water nearby to wet your hair. It’s even better to use a special sprayer for this purpose, on which you just need to press a button in order to wet the strand. Thanks to this, the haircut will be even.
• Since you wet your hair during the cutting process, it will become slightly longer than usual, but this is only temporary. Therefore, cut, for example, even bangs with a margin of 1 cm, so that when the bangs dry, you won’t be amazed at how short they turned out.

These rules are simple, it’s easy to follow them, but there will be a lot of benefits. As a result, you may get a haircut that is no worse than in a professional salon.

How to cut your bangs yourself

First, separate the hair from the front. It's up to you to separate the hair from the very top of the head or closer to the forehead; you should be guided by the thickness of the hair. If you don't have very full hair, take as much hair as possible to create volume. As for the width of the section of selected hair, it should be forehead width. Now we remove all the remaining hair and secure it with clips. Let's get started!

Comb the hair that will soon become bangs over your face and lightly wet it with water to even it out. Need to cut strand by strand- divide this hair into several parts. Take one of them and cut off enough so that the remaining strand is just below your eyebrows. The scissors should be held at an angle of 45 degrees, so it will be as comfortable as possible for you to cut.

Now work on the next strands in the same way. The result should be straight line, but from the very first time this same line may be slightly curved. This can be completely corrected by cutting off the excess, then the scissors should be held at a right angle. When you see that your bangs are completely straight, dry them and, if desired, profile- pointing the scissors parallel to the forehead, cut off unnecessary hairs.

Many people ask themselves a question before cutting their bangs. In our article, everyone will find an answer for themselves.

Sunday is the most unfavorable day for cutting hair. Why, read

Side bangs are easy

Thinking about how to cut side bangs yourself? It must be done according to the same principle as the direct one. First, we prepare the hair for a haircut, that is, we separate the strands for the bangs, remove other hair, and spray the future bangs with water. Now let's get down to the haircut. You need to cut side bangs down up, the scissors must be held at an angle of 45 degrees during the process. First, make side bangs with a large margin. After this, do the so-called wet thinning. Divide your bangs into about 10 strands and cut each at a different angle. This will look better and more impressive. You need to leave approximately 5 mm in reserve. Now we dry the bangs and admire the result of the work.

How to cut torn bangs beautifully

Torn bangs need to be cut with some aggressiveness and carelessness. The process of creating such bangs combines straight haircut and thinning oblique bangs, this is what distinguishes the torn type from the rest. As a rule, girls with such bangs have wavy hair or simply very unruly and voluminous hair; torn bangs are ideal for such cases.

The undeniable advantage of such bangs is the many styling options. No matter which way such bangs are laid, it will look impressive and unusual.

Method for creating semicircular bangs at home

Half-round bangs are the hardest to cut, but you can do it too. First, we do the standard procedure - we separate the main head of hair, lightly wet the hair at the front. Now let's start cutting: take a strand from the side and cut the hair, leaving the length 5 mm lower than you need. We do the same procedure with the strand on the opposite side. Then we slowly move towards the middle, evenly shortening the strands. This haircut should be done in front of a mirror in strong lighting, because any mistakes and curvature will be visible. When the bangs are ready, check again that you cut them straight, dry them and profile them if desired.

For many girls who are attached to their hairstyle, constantly maintaining its optimal length and appearance can be a real problem. Frequent visits to the hairdresser, at least once every two weeks, take a lot of time. Therefore, they are actively looking for ways to properly cut their bangs or lay them on the side without the help of a specialist. In fact, there is nothing difficult in this task - the main thing is to make the edges smooth so that they do not interfere with the view.

18 options in various ways to cut a forelock

First, you should decide what type of haircut you have, whether you have straight, thick or curly hair. Next, follow these simple recommendations on how to cut your own bangs at home.

The procedure begins with defining the bang area, then it needs to be wetted

1. If it is straight, thick or arched, then to trim it, separate the strands selected for it and secure the remaining hair so that it does not interfere.
2. Comb the selected area and blow dry the ends inward.
3. To achieve the perfect result, cut the strands in layers, carefully separating them with a comb, following the given shape.
4. Try not to reduce the length too much; focus on their lower cut zone.
5. For greater naturalness, you can leave a few strands uncut or use special scissors for thinning.

After determining the length, we mill the ends

Other options for this haircut involve a slightly different technique, but there are a number of tips that are universal in all cases:

How to cut ragged bangs yourself?

It is advisable to do this option on dry hair. With their curly and dense structure, you will need daily styling, so before moving on to how to cut the most ragged bangs, consider this important point.

1. Select the desired area and use bobby pins to secure the rest of your hair.
2. Pull the marked area to the side where its minimum length will be.
3. Thin out the ends of your hair, removing about one-third of it.
4. Focus on the width along the right and left bulges of your forehead and do not go beyond your temples.

• Before you begin, part your hair with the most comfortable parting for you - parallel to the growth line, U-shaped or triangular.
• Choose the thickness of your haircut depending on your face type and personal preferences. Remember that the thicker the bangs, the thinner the hair will be in the main part of the hairstyle.
• When cutting, take into account parameters such as thickness, length and structural features of your hair.

How to cut long bangs?

This is the easiest and fastest option for cutting off a cute forelock. There are no difficulties or special secrets in how to cut long bangs yourself.

How to cut side bangs?

One of the popular questions is how to cut side-swept bangs yourself. You can easily cope with it if you follow these recommendations:

• Wash your hair and dry it with a towel.
• Determine the length and direction. Do not forget that wet hair under their weight they look longer and heavier than dry ones. Leave a centimeter or one and a half in reserve.
• Separate the forelock and secure the rest of the hairstyle with clips.
• Cut it at the intended angle along the bias. Keep the tips straight down and the scissors at an angle. For torn effect it should be about 45 degrees - to do this, position the tool vertically and make diagonal cuts, gradually going deeper.
• To add volume, thin out the finished cut. Take a control upper strand of small thickness and hold it at eye level. With two fingers, grab the tip and cut the resulting ponytail. Do this with all the strands.
• If you have thick or coarse hair- profile them. If they curl, then this is not necessary, as they will curl even more intensely.

Bangs are an important “accessory” in a hairstyle, which not only embellishes it, but can also visually transform the face and hide existing flaws. And sometimes, if you have some skills, you can cut your bangs yourself at home, which will significantly save time on trips to salons and, of course, finances.

And if a specific beauty issue is relevant to you, then let’s figure out how to cut your own bangs evenly.

Cutting bangs at home

In fact, many women practice cutting their own bangs. Moreover, many learned the first basics of this business in childhood. This activity will not be difficult, even if it is being done for the first time. Still, observing some nuances won’t hurt.

The first is deciding what shape the future bangs will be, because, as you know, there are several options. It is important to choose the right bangs that will fit perfectly with your existing hairstyle, face type and other features of your appearance.

The second nuance is the tool. As a rule, most often cutting bangs is done with scissors. Therefore, they must be sharp, since a poorly sharpened tool will not only cut off the strand unevenly, but also ruin the hair.

In order to cut your bangs beautifully, strict adherence to all rules and recommendations will help. But first things first.

What tools are useful for cutting hair?

It’s worth taking care of the set in advance necessary tools. An independent process carried out at home will not require a lot of cutting equipment; even special scissors for hairdressers will not be useful.

But this is what you need:

1. Scissors. If you still have in your arsenal professional tool, then this is excellent, because with its help you can cut your bangs quickly, evenly and beautifully. But if not, then you can use regular ones, as long as they are sharp.
2. A double-sided comb, with small teeth on one side and sparse teeth on the other. Or a comb, at the other end of which there is a sharp tip, allowing you to easily part your hair.
3. Special clips or hairpins (crabs) for fixing strands.
4. Spray bottle for wetting hair.
5. Mirror.

Over time, it will be possible to purchase not only professional scissors for hairdressers, but also special thinning ones that allow you to create various interesting effects.

Hair preparation

Before you cut your own bangs evenly, you need to prepare your hair, or rather the strand that is supposed to be shortened. We are talking about pre-moisturizing. And although some are still debating whether to cut bangs on wet hair or dry, many have already proven that the hair should be pre-moistened.

How to cut bangs beautifully will be determined by the moisture content of the strand. In this case, the cut will be smooth. And if you cut your bangs dry, then its final length will “jump” by several millimeters and the result will be not the desired long one, but short bangs.

It's another matter if the hair is not straight, but curly. Then pre-wetting the strands will not work, because in this form curly hair They will straighten out, and when they dry out, they will curl again. And the end result will be complete disappointment, and not the expected appearance of bangs. In this case, it is recommended to straighten dry curly locks with an iron, then the end result will meet all expectations.

Deciding on the length, shape and thickness of the future bangs

It is important to choose what type of bangs you cut yourself, what thickness and length. The choice of bang type should be based on the type of face, its fullness, as well as the structure of the hair itself. Here are a few nuances:

1. Rovnaya long bangs, as a rule, should be thick.
2. If your hair is curly, then short bangs should be excluded. A strand with torn edges or an oblique cut is suitable.
3. For thick straight hair, smooth bangs that reach the brow line work well.
4. On fine hair Ragged edges will look good, adding visual density.

As mentioned earlier, bangs should be matched to your face type. So, the owners of the ideal oval face can experiment with various options, the main thing is to avoid excessive extravagance.

How to cut bangs at home for ladies with a square face? In this case, not everything will do. Self-cut torn bangs, as well as an oblique strand will hide imperfections such as sharp, wide cheekbones and a massive chin.

Those with a triangular face type should give preference to thick, even bangs or oblique cuts. In the first option, it will be possible to divert attention from wide forehead, and in the second - from a sharp chin.

Chubby beauties should choose straight bangs or cut an oblique strand.

As you can see, long oblique bangs are universal and will suit almost all face types. Moreover, it has remained relevant for more than the first season.

How to cut straight bangs beautifully?

So, if for self-trimming you choose an even straight strand that falls onto your face, then you will need preliminary preparation, which was mentioned earlier. Humidification is one of the main conditions, otherwise an even cut will not work.

So, how can you cut your own bangs evenly?

1. Select a certain strand of hair from the side of the forehead, parting it. The rest of the hair is pinned up with hairpins or clips so as not to interfere.
2. Wet the strand so that it becomes damp, not wet.
3. From the selected strand, separate a small part of the hair from the side of the right temple, stretch it between the middle and index fingers and cut off everything that is located 1 centimeter below the level of the eyebrows. Scissors should be held at an angle of 45°.
4. The same steps are repeated with a strand isolated from the left temple.
5. Afterwards, the remaining strands are cut in the same way, focusing on the given length.
6. Comb your bangs, trimming the ends if necessary.
7. If desired, thinning is done.
8. After this, using a hairdryer and a brushing comb, dry and curl the resulting bangs.

Using the same scheme, you can make a hairstyle with bangs on average length main head of hair. For short hair this is also possible.

Self-cut choppy bangs

This type of bangs will suit many girls, and cutting it won’t be too difficult. To cut your own bangs evenly, like in a hairdresser, you need to follow the following sequence:

1. Separate a strand of hair from the side of the forehead along the parting. The rest of the hair is removed with clips or hairpins.
2. Using a spray bottle, moisten the hair so that it becomes damp, but not wet.
3. Separate a small strand in the center, pulling it between the middle and index fingers, and make a cut, leaving a centimeter or several millimeters below the eyebrows. Having thus determined the length of the bangs, cut off all other strands from the sides.
4. You should get straight bangs. After this, they begin to create a torn one. To do this, holding the scissors at a slight angle (45°), make half-centimeter cuts in several places.
5. You can use special thinning scissors to speed up the process.

Torn bangs with a hairstyle for medium length hair will be popular in 2018. Therefore, you can safely practice cutting your bangs yourself.

Side bangs

Long oblique bangs, which never go out of fashion, can be cut independently using the tools listed earlier. And doing this is not as difficult as it might seem at first.

1. First, separate the strand for the bangs from the rest of the hair. Interfering curls are pinned with holders or regular hairpins.
2. Wet the hair from a spray bottle.
3. After this, comb the strand of hair and visually determine the edges of the beginning and end of the bangs. Typically, oblique bangs start from the eyebrow line and end at the middle of the nose.
4. After this, pinch the entire strand with two fingers and, holding the scissors at the desired angle, make a small cut. After this, make sure that the selected angle is even and correct.
5. Next, again holding the strand between your fingers, make another cut. And so they continue until the lower edge of the bangs is reached.
6. After this, comb the bangs and trim the edges if necessary.

You should not immediately cut off a large strand of hair, wanting to quickly form bangs. After all, if necessary, you can’t get your hair back, but by cutting off little by little, you can achieve desired result.

Short bangs

Short bangs are the lot of extravagant and brave girls and women. It will not be difficult to cut it, especially if there are no restrictions on its length.

At first, all the same steps are carried out as when cutting other types of bangs:

1. Separating the bangs.
2. Its wetting.
3. Next, separating small strands from the overall bangs, cut off the ends to the middle of the forehead and above.
4. The remaining strands are aligned along the same length.

The length of a short bang can be up to the middle of the forehead or just 3-4 centimeters down from the level of hair growth. Before you cut your own bangs evenly, you need to check your face type with a specialist, because short version Not suitable for every woman.

Haircut with clipper

In some hairdressing salons, hairdressers practice trimming ends and cutting bangs using a regular hair clipper. And how to cut bangs at home using this tool?

1. First, all excess hair that interferes with the formation of bangs is also removed.
2. Moisten the strand separated from the rest.
3. Since the clipper can have strong vibration, and this can cause your hands to tremble, you should use a little trick: mark the required length with a plaster, sticking a piece to the desired level on the hair.
4. To stabilize your hands and prevent them from shaking when cutting, it is better to hold the clipper with both hands and place your elbows on a support (table).

The cuts will be smooth.

• The bangs you choose should perfectly match your hair type.
• Cutting bangs on curly hair should be done by first straightening the strands with an iron.
• When cutting a strand, do not pull it back too much, otherwise you may make a mistake with the length.
• Oblique bangs need to be cut from bottom to top, in the opposite direction you will get an oblique cut.