Of the many types of clothing, jeans are the most popular in the world. And no matter how many pairs of these trousers we have in our wardrobe, among them there will always be a pair of our favorites. And if they suddenly lose their appearance due to an unexpected tear or abrasion, it will seem like a real disaster. But don’t despair: today it’s even fashionable, and therefore many fashionistas, on the contrary, are looking for a way to do ripped jeans from used or completely new trousers.
How to make ripped jeans
So to do fashion item, you first need to get a pair of worn-out but loved jeans from the bins of your closet and try to make them torn.
- For such experiments, medium-density denim is better suited.
- You will also need a sharp knife, you can use a stationery knife.
- A small piece of plywood.
- A piece of chalk and a vacuum cleaner, which will be used to remove lint and threads after cutting.
First, you should decide on the degree of “vandalism” you want: small abrasions, discreet cuts or super torn trouser legs. However, it is important to take into account that tears in the buttocks or knees often look ridiculous, so you need to think carefully about where to cut the tissue. After this, you need to outline the pattern of cuts as clearly as possible with chalk. Then the trousers are hung at eye level to evaluate the result from a distance. When everything suits you, you can begin action.
For your first try, it’s better to take jeans that you don’t mind ruining.
Before that, you need to place a small plywood under the places of future cuts on the jeans. This is done in order to make the cut as evenly as possible without damaging the opposite part of the jeans. Then a neat cut is made across the selected trouser leg according to the intended pattern. After all cuts are made, it is removed certain part threads perpendicular to the cuts to loosen the cross threads, which are quite strong and slightly lighter than the main color of the trousers, which will add style to the decor. It is advisable to make cuts at the same distance.
With large gaps between them for better effect you need to do them a couple at a time, and cuts made close together are ideal. After making the cuts, you need to use a knife to clean the longitudinal threads from the remaining lint. All that remains is to use a vacuum cleaner to complete removal remnants of threads.
To make your own ripped jeans more effective, you will have to arm yourself with bleach containing chlorine and carefully walk along the edges of the torn areas. In order to stuff your hand, you need to do this process on a separate piece of paper. denim or in an inconspicuous place on trousers.
In case you have a desire to decorate torn jeans lace, then you just need to turn the jeans inside out and sew openwork fabric under the cut sections, which can be purchased at any fabric store or simply cut from an unnecessary lace blouse. To dark jeans black will do lace, and for light ones - gray or white. The lace is sewn on with fine stitches using threads to match the color of the jeans. It is also important not to stitch the trouser leg all the way through, but try to capture only the inner threads, which will avoid untidy stitches around the perimeter of the cut. Upon completion of work, you need to wash the jeans and iron them. Such trousers are washed by hand, placed in a gauze bag or an unnecessary pillowcase, since washing machine may completely destroy them.
If you are still not sure that you can handle decorating your favorite trousers, you can watch a video tutorial, for example this one, before making ripped jeans:
An action seen, rather than just read, is always perceived better.
After the appearance of such outfits on the streets of cities, older residents were generally shocked by them. Therefore, it is all the more necessary to be able to correctly combine them with the rest of your wardrobe. Although many stylists believe that ripped jeans can be safely worn with all more discreet things and literally with any shoes. But at the same time, it is important to adhere to the basic rule: the upper part of the outfit must be harmoniously combined in style with the shoes. And if we talk about specific options, there are a lot of them:
- interesting and stylish combination with ripped jeans blouse and shoes high heels, which is ideal for a party;
- V everyday wardrobe ripped jeans can be combined with a classic, practical top and flats;
- on a country trip, you can wear ripped jeans and a loose T-shirt with sneakers;
- in hot weather summer days It is appropriate to complement torn jeans with a chiffon tunic, while wearing sandals with high wedges.
Jeans with holes go with absolutely any shoes. With elegant pumps...
...with open heeled sandals...
...with ankle boots...
...with ballet shoes...
...with brogues or oxfords...
...with sneakers...
...and even with flip-flops.
True, sometimes, even after practicing how to make old jeans torn, you can get an undesirable result. But don’t be upset: firstly, the trousers were originally old and you probably wouldn’t be able to go anywhere in them. Secondly, even in these jeans you should feel irresistible, because you certainly won’t see anything similar on anyone else. Besides, maybe this particular form of cuts will soon become fashionable, perhaps even thanks to you. After all, for so many years now, these torn outfits have been trendy clothing, then slightly losing ground, then again soaring to the top of fashion. And they differ precisely in the way they cut denim. Stylists believe that ripped jeans will not fall into oblivion very soon and therefore give a completely reasonable hint: everyone should have these stylish pieces of clothing in their wardrobe. And there is absolutely no need to spend huge amounts of money on purchasing ripped jeans made by famous designers. You can transform your favorite, albeit old, denim into a very stylish thing yourself. The main thing is desire, attentiveness and a flight of imagination.
Celebrities in jeans of varying degrees of ripping
By the way, having learned it, you can supplement the experience gained with fantasy details and then you will get a completely new style of daring trousers.
So, to give your ripped jeans more drama and style, you should stock up on free time, remarkable patience and to the standard holes or scuffs add a couple of slits on the pockets or on the belt.
You can also try to go beyond the generally accepted framework and cut round holes, give them the shape of hearts or triangles. These figures can be trimmed with floss threads, decorated with rhinestones, lace, sequins, ribbons, and beads. After testing all possible types of “torture” on jeans, you can easily and safely even make... curtains from them. After the first trousers, your hand will gain sufficient experience, and you will be able to continue not only to become more sophisticated in decorating ripped jeans, but also to practice performing other design feats.
Making a fashion item with your own hands
Besides, how to make trendy ripped jeans using the method of cuts, our needlewomen are looking for the answer to the question of how to make jeans frayed or truly torn. Unlike the first method, in the second, sandpaper or pumice will be added to the tools necessary for the “operation”. As before, the model you like is selected. It is not so important where the prototype is taken from - from the Internet or a boutique. The main thing is to decide on the method of decorating: holes, slits or abrasions. After all, jeans are considered torn even if they simply have abrasions, which after machine washable will turn into natural holes on their own. Use a pencil (or chalk) to mark the locations of future holes. Again, before making beautiful ripped jeans, it's important to remember that vents look best below or above the knee. So, the trousers are laid out on a smooth surface. Then a block or plastic is placed between the legs under the intended place. When making slits, the fabric is cut along the drawn line with a utility knife. The transverse threads are pryed up with a needle and removed with tweezers. The holes are made in the shape of the letter “H”, and to make the cross threads easier to remove and the hole to look visually larger than it actually is, the cross bar in the letter needs to be made a little longer. You can also make two slits in parallel, and carefully remove the short longitudinal threads, which is very important in how to make beautiful ripped jeans. To perform abrasions, the prepared area must be rubbed with pumice. For a more original effect, you can scratch the intended area on the jeans with a razor. Again, the perimeter of the abrasion, cut or tear is treated with bleach and the jeans are finally washed.
Making jeans with holes and scuffs
Such unpretentious trousers also have certain requirements for a woman’s body type, depending on their cut. It turns out that straight trousers are suitable for large hips. The holes in this case are located vertically and not too often, which will give the figure a slim and visual elongation. When deciding on the ideal figure, you can choose any cut, but skinny denim trousers with provocative slits on the knees and hips will most emphasize your slimness. If you are short, holes should be placed only in the upper part of the trousers or on the calves, which will make the figure more defined and light. The most desperate girls can choose acid or neon jeans for even more brightness, which will make the image even more daring. True, to go with this color of jeans, you need to choose neutral light-colored things, so as not to turn into a palette of poisonous tones, from which simply ripped jeans will turn into “eye-opening” pants. After all, it is important to adhere to balance and harmony in everything, even in matters how to make stylish ripped jeans, which will help emphasize not only individuality, but also the sense of proportion and taste of the owner of such trendy trousers.
Photo
These stylish jeans goes with almost anything
Not a bad option for a garage party
Great everyday ensemble
Casual style
A brilliant (literally) look for a disco. Become the queen of the club!
Video
Admin 2012-07-08 at 2:25 pm
Why do we love ripped jeans? Many things: firstly, beautifully “rip” jeans– this is a great opportunity to give your favorite pants a “second life”. Secondly, it’s fashionable - world-famous celebrities have already recent years“shine” with holes in the most interesting places. And thirdly, it's sexy. But how make your own ripped jeans?
It seems like what’s so complicated about it? Take scissors and strip the legs where necessary. But it's not that simple.
Not all jeans will do this. For example, insulated fleece-lined jeans or thin summer ones immediately disappear. Insulated ones will look terrible, and summer ones will fall apart during the first wash. A “decent flaw” is obtained only on fabric of medium density and thickness.
And one more thing: to achieve a natural effect, after the manipulations done, the jeans must be washed.
So, to tear your jeans beautifully, you will need:
- stationery knife;
- pumice, sandpaper or stone for sharpening knives;
- bleach or bleach with chlorine;
- a thick needle or nail scissors or a clothes brush with stiff bristles.
- a metal or plastic plate (place inside the trouser leg before cutting the trouser legs with a stationery knife).
Now come up with your own version of the image and go ahead!
Use regular tailor's chalk to mark the locations of future cuts. Determine the frequency and location of them.
Please also take into account that the size of the hole after wearing will increase over time due to the fact that the transverse threads are released and the edges become “frizzed”.
Place the jeans on a flat surface (possibly on the floor).
Place plywood or a cutting board into the trouser leg to prevent it from tearing through. If these are your own old and worn jeans, you can make a symmetrical “ornament” on both legs.
Now to beautifully tear jeans, rub the fabric with sandpaper or pumice. Don't rub too hard on your knees (preferably above or below them), otherwise within an hour they will break through and turn into holes.
You can do this by putting jeans on yourself or by placing something hard under the fabric. Try to make the wear even and not tear the jeans.
To make only small abrasions, the jeans should first be wetted with water.
If you want to tear jeans beautifully, use nail scissors, a scalpel or a sharp utility knife. These tools will allow you to make frequent thin cuts (“noodles”) without much effort.
Jeans that are “worn to holes” vertically are done like this: cut the fabric to a width of 2-3 cm, then carefully pull out the transverse threads with tweezers (or eyebrow tweezers).
Another option: holes in jeans can be made using a needle or small and sharp nail scissors. Simply pull out the vertical threads with a sharp end from the place where you want to create a torn effect. This method will provide you with disheveled holes that will look even more impressive after washing.
Holes on jeans look especially impressive if the fabric around them is slightly bleached. To achieve this effect, before tearing your jeans, treat them with bleach or “bleach.” To do this, apply a bleach solution to the desired areas for a while and then wash the pants, or you can completely boil the jeans in a bleach solution. Having received such “scuffs”, you can safely move on to making holes.
Can I have some more beautifully tear jeans not only on the legs, but also make several small cuts and holes on the belt, pockets, and also rub along the edges of the pockets and along the bottom edge of the jeans. After this treatment, the jeans will look more complete and harmonious.
You need to wash torn jeans by hand, first placing them in a gauze bag or an old pillowcase, otherwise the washing machine will completely destroy them.
It's that easy make your own ripped jeans.
And here, look how a guy makes a thing out of T-shirts, cool!
If you want to learn how to sew yourself women's pants, then you can order the video course “I sew my own first trousers” with a special discount, which describes in detail the entire process from creating patterns to modeling and sewing, as well as correcting the most common mistakes fit of trousers on the figure. To receive a discount, as a reader of this blog, enter a special coupon: P5T23 at checkout and after choosing a payment method, the system will recalculate the price. Attention! The coupon will only be valid for 14 days from the date of first entry and entitles you to a 15% discount.
Jeans are a favorite item of fashionistas, with which you can highlight all the charms of your figure. For several seasons in a row, ripped jeans have been at the peak of popularity. There is no need to spend a lot of money on purchasing such clothes, because you can make a fashionable thing out of old trousers yourself. In this article we will tell you how to do this.
Beautiful holes
Do not rush to randomly cut holes in the fabric. First, turn the jeans inside out and examine the composition and weave of the fabric. The holes in the canvas of different colors on the back and front sides look very nice. In this case, the threads will be dyed a different color than the main fabric. Using a pencil, draw where you will make the holes. Try to keep the stripes parallel to the weave of the fabric. IN otherwise you will end up with irregularly shaped slanted holes.
Before cutting the fabric, place a board or any hard surface inside the pant leg. Use a utility knife to make a cut. After this, you can start decorating the hole. This is done by creating a fringe from threads. If the fringe turns out oblique, straighten it using nail scissors. Be careful around the pockets as you may accidentally cut them. The fabric lining of the pockets does not look very nice, as it shows through holes and abrasions.
Lightening the threads
If the color of the threads blends in with the fabric, then they can be lightened using bleach or any chlorine bleach. To do this, simply apply a bleach solution to the threads with a brush. When choosing locations for holes, try to avoid the knee area. In these places, over time, the holes increase and the threads stretch.
Decor with lace and spikes
If you want to change your jeans beyond recognition, you can hem lace or thin fabric with floral print. Thus, the thing will look very feminine. These jeans can be worn with chiffon blouses and tops. Even heels go well with ripped jeans with lace.
Aggressive boyfriends are all the rage these days, so don't rush to throw away your old jeans. Using a utility knife, make several horizontal cuts at the top of the pant leg. Using a regular needle, pull out several threads to create a strip of threads. Purchase spikes and rivets from a hardware store. Attach spikes along the perimeter of the cuts.
Scuffs
If you don’t think the product is creative enough, you can add abrasions on the pockets and at the bottom of the legs. This can be done using sandpaper or a fine grater. Please note that you need to move the grater from side to side along a horizontal line. This way you will get neat scuff marks. They can be lightened with regular bleach or Domestos. To do this, apply bleach to the area you want to lighten and leave for 20 minutes. Rinse the pants and wash them in the washing machine.
Don't be afraid to experiment. If you are not sure of success, you can practice on a piece of old jeans or a vest. In a pinch, the pants can be turned into cute shorts.
Pick a pair of jeans. It doesn't have to be new jeans. You can buy inexpensive jeans from a second-hand store.
- The result will be better if you have already worn these jeans. However, this should not deter you from buying new jeans.
- Light-colored jeans look better ripped because they look naturally worn. Dark jeans won't look right realistic.
Prepare the necessary tools. Usually it's a pair of jeans and something sharp. Depending on your project, you will likely need the following materials for the job:
- If you want to make big holes, then take scissors, a razor or a knife. A tool or stationery knife is perfect.
- If you want a worn look, then take sandpaper, a cheese grater, steel wool or pumice.
Mark the location of the cut. Lay your jeans on a smooth surface and use a pencil to mark the cut locations. Use a measuring tape to determine the exact length of the cut. Visualize in your mind what the cut will look like and how wide it should be.
- Generally, most people prefer incisions near the knees. However, you can tear them anywhere else.
- Make the cut just above the knee so that the hole doesn't get bigger every time you move or bend your knee.
- Don't make the cuts too high, otherwise your underwear will be visible.
Place the jeans on a smooth surface. Insert a small block of wood into the pant leg to prevent damage to the fabric at the back.
- Alternatively, you can use a cutting board, an old book or a stack of magazines. In a word, everything that you don’t mind damaging. You're not going to damage your kitchen table with a sharp knife.
Before making a cut in the fabric, take sandpaper or steel wool and rub it until the fabric becomes much finer.
- This process will help loosen the fibers.
- You can use a variety of tools: sandpaper, steel wool, and even pumice. This may take a little time, depending on the thickness of the fabric on your jeans.
If you want to rip your jeans right away and don't want to create a worn look, then go for it. Loosen the fibers more to create holes.
If you want to get torn fibers instead of holes, then using scissors or a knife, carefully stretch the part of the fabric that you rubbed with pumice. This way the area will be very worn and your skin will be just a little bit visible through it. Pull the white fibers of a given worn part to make the wear appear more realistic. Add holes using a knife or scissors.
- Take scissors and make several cuts in the frayed part. The slits should not be large, otherwise you will ruin the jeans. The length of the cuts should not exceed one and a half centimeters.
Make cuts across, not lengthwise. This will look more natural.
- You will need
- - stationery knife;
- - pumice;
- - bleach or bleach with chlorine;
- - thick needle or nail scissors;
- a metal or plastic plate (for example, a lid from Montpensier sweets).
Instructions Ripped jeans regularly appear in... They can again be seen at famous shows. These jeans are ideal for those who are not afraid to look beautiful, fashionable and extravagant. Jeans add a small amount of eroticism and freedom to their owner. You can find them in almost any store with. But the price is quite high due to increased demand. It's much cheaper to make these jeans yourself. This will save your money and the jeans will be individual, and not made “for” whole batches. Luckily, jeans aren't that hard.
You need to take pants made from classic denim to get good holes. Choose jeans so that the material is quite dense to the touch. Buy or select from your wardrobe jeans that fit your silhouette. If you take tight pants, then all the holes made will stretch and look ugly. If you choose loose-fitting jeans for work, then the holes simply won’t be visible. Golden mean in this business is one of the main conditions for achieving success.
It seems that holes are always made in a chaotic manner, guided only by inspiration. But this is far from true. The cuts themselves must be made very carefully. And you need to start your work with markings. Lay the jeans on the floor or table and use chalk to mark the areas where you would like holes to be made. Then you can visualize what the jeans will look like in the end. Also, try on your pants during the process. It's better to make some improvements somewhere than to overdo it in creating holes. After all, if you make a hole that is too big, it is unlikely that you will be able to correct your mistake without completely destroying the acceptable one. appearance. As a result, the item will simply end up in the trash can, and the mood will be ruined.
Do not make holes in the knee area. There you will definitely stretch them and your pants will look terrible. It's better to make the cuts a little higher or lower. In addition, make sure that there are no cuts on the folds. This also threatens to stretch the material.
There are several proven ways to rip jeans in a very artistic way. The first one is to cut holes using a utility knife. To do this, select a place on the leg that you will treat, for example, the knee. Place it under the metal cover, take a utility knife and start cutting holes across the leg with it. Make pretty a large number of cuts so that individual threads begin to stand out. Then use your fingers to clean the resulting fringe from dust and small threads and place the jeans in washing machine. After washing, the holes will look natural.
In addition, holes in jeans can be made using a darning needle or nail scissors. Using the sharp end, simply pull out vertically thread by thread from the place on the fabric where you planned to create a torn effect. This method will provide you with disheveled holes that will look even more impressive after washing.
Also try using a pumice stone or a wire brush to “wipe” the holes in your jeans. You can do this by putting jeans on yourself or placing something hard under the fabric, as was the case in the first case. Try to make the wear even and not tear the jeans. To make only small abrasions, the jeans should first be wetted with water.
Holes on jeans look especially good if the fabric around them is slightly bleached. To achieve this effect, before tearing your jeans, treat them with bleach or “bleach.” You can apply the bleach solution only to the desired areas for a while and then wash the pants, or you can completely boil the jeans in the bleach solution. Having received such “scuffs”, you can safely move on to making holes.
Sometimes it makes sense to tear jeans not only in a certain place, but also to make several small cuts and holes on the belt, pockets, as well as wear along the edges of the pockets and along the bottom edge of the jeans. After this treatment, the jeans will look more harmonious.
Add effect by cutting off a little of the hem of the pant leg. Flatten the remaining denim with sandpaper or pumice. Don't forget about the pockets. Make several small holes in visible places and also do not forget to ruffle them.
