Many people live in small studio apartments, and this pushes them to do everything to save space. One such cost-effective option is inflatable sleep products, but some people don't know how to deflate an air mattress. It is purchased instead of a bed, but, unlike it, it can be lowered and folded into a remote place, thereby freeing up a lot of space in the room.
Today there is a large number of different models. When choosing such an air bed, the main criterion is quality. Therefore, before purchasing, you should pay attention to the properties of the product and customer reviews.
Air beds have many advantages: mobility, compact storage, convenient transportation, for which a cover is included, but most importantly - comfort that is not inferior to relaxing on the sofa. You need to choose a model that will provide a comfortable body position and comfort during rest. Such products can also be used in other areas, for example, you can swim on the sea surface, sunbathe in the sun, lie on fresh air in the shade of trees at the dacha.
The most common mattresses are those with a built-in auxiliary valve that keeps air inside even if the lid is open. These models will be comfortable at home, outdoors, and at sea. They are universal for a wide variety of conditions, including extreme ones.
How to avoid mistakes when deflating a mattress?
- To properly vent the air, the product must be laid out on a flat surface.
- There should be no sharp objects in the place where it will be blown away.
- Electric heaters and heaters with high temperatures should also be kept away.
- When using the product, you should be careful with sub-zero temperatures, as they can damage its surface.
- To deflate, do not use high-pressure pumps, such as a car compressor.
How to deflate an air mattress correctly?
To inflate the mattress, a special external pump is used, and in order to deflate it, you need to apply certain forces and create certain conditions. Before starting the procedure, it is necessary to clean the product with a mild soap solution, but under no circumstances use aggressive cleaners. The surface should dry dry on its own, without the help of electric heaters or space heaters. The same applies to a mattress that was used for swimming - it must also be thoroughly dried.
To start the procedure, you need to open the valve and wait until the air deflates on its own. In this case, it is forbidden to press on it in anticipation of what will happen faster - the process will not speed up, and the product may be damaged. The larger the volume of the air bed, the longer you will need to wait until the air is completely released, but even then you should not press too hard.
It is important to use and care for the mattress correctly. So, a single air bed can be deflated in 10–20 minutes, but there are difficulties. In the hole through which the air space is pumped, there are special valves that prevent air from escaping under external pressure. To bleed air, you need to open the valve and squeeze it slightly. This way the bridge bends, which allows for faster deflation.
Advantages of a mattress with a valve
Models and brands of air beds are made with a variety of valves, so when deflating, you need to consider the shape of the valve.
- To deflate a mattress with a classic valve, you need to open it, apply light pressure and twist the product little by little.
- In the case when the valve is designed like a bicycle or a car, you need to squeeze it on both sides with your fingers, and the hole will become open for easy release of air. In another case, you can use a match by pressing it on the central nipple. It will be convenient for two people to work here, when one blows and the other twists.
- Models with a removable valve are the simplest. It is necessary to unscrew the valve entirely, and the air will quickly come out on its own.
- There is an option when for downloading you can use the same electric pump that was used to inflate. You just need to turn on the “Air release” mode. In this case, you should not use a hand pump.
How to deflate an air mattress with a pump?
Pumps for air beds are very convenient and practical devices that help in the process of their operation. When purchasing such frameless furniture, it is recommended to purchase a pump with two modes: for inflation and deflation. Typically, low-pressure pumps are used in such cases:
- mechanical (hand, foot) require additional force;
- electric ones allow you to deflate the mattress with one press of the “Blowing Air” button.
The main rule of inflation is the regulation of elasticity; the air inside the product should be no more than ¾ of the total volume, in otherwise The seams may tear and the mattress will burst. If it is over-inflated, you need to let some air out of it.
How to deflate a mattress using a foot pump? To do this, you will need to apply a little less force than when inflating. The pump should be connected to the product and pressed on the air chamber, which fills with air and then releases it out. A set of mechanical pumps is usually supplemented with small adapters, with the help of which air is pumped out of the product.
With the help of an electrical device, the descent occurs through a hose, which is inserted into a specially marked hole and connected to an electric pump. It has a “Blowing air” mode, after turning it on, the deflation process begins.
An air mattress was invented in order to bring more comfort to daily life. This comfortable product is suitable for sleeping, swimming and other ways of relaxation. It is important to know the operating instructions and careful care behind him.
Today, many people increasingly have air mattresses. They are easy to use and can help in various situations, for example, at home it can replace a sleeping place, in nature it is a great opportunity to relax with your loved ones, and at sea the mattress can be used as a swimming device. In addition, it takes up very little space when folded.
Today you can find a variety of models of air mattresses . They differ according to the following criteria:
- Dimensions (single, one and a half, double, European);
- Height (13−56 cm);
- Colors.
The main points when choosing a product is its quality. A quality product has the following advantages:
As a rule, in modern products mechanical pump included(manual or foot), which allows without special effort bring it into the appropriate form. It’s very simple, because all you need to do is integrate the device into the valve and in just a few minutes you can enjoy a comfortable rest.
However, it may well be that the pump is not present or is completely broken. In fact, there are many available tools that will help you inflate your mattress without much difficulty. Of course, it is more convenient when there are built-in valves. So, there are several ways to help inflate a sleeping place without a pump:
Regardless of the method you choose, remember that you should not inflate the mattress until it is completely filled; it is better if it is filled to 85% of its total volume. Thanks to this, you will avoid the possibility of seams coming apart and extend the service life.
Besides, There are “bad tips” for inflating a product:
- Using your lungs, filling the product with air through your mouth. If this is done alternately by two men, the process itself will take about 15-20 minutes. However, this is not recommended, since this method can be harmful to health.
- The car exhaust pipe helps pump air into the product. Connect the adapter to the valve and you can begin the inflation process. This should not be done, since the exhaust gas, once inside the product, begins to destroy it.
How to deflate a sleeping place correctly
When inflating, you can use a special pump or some available means, but in order to deflate the mattress you need to create certain conditions and put in a little effort. Regardless of the brand of the product, the principle and rules for deflating a bestway, Intex or any other mattress are the same.
First of all Let's consider those factors, the presence of which will help to lower the product correctly:
- Smooth surface.
- No sharp objects.
- Lack of heating appliances.
- It is strictly forbidden to use automobile compressors or other devices where high pressure is present.
An inflatable mattress is an indispensable thing on vacation (in a tent, at sea) or at home. Many people use such mattresses as a full-fledged sleeping place in the country or as an extra bed for guests. Among the advantages of air mattresses are durability and ease of cleaning, compact storage and no need for special care. You need to know how to inflate a mattress quickly and efficiently - after all, you may need it in the most unexpected situation.
Pumps for inflating mattresses
A mattress is a fairly large and voluminous item. In any case, you can't inflate it with your mouth. The best solution to the question of how to inflate an air mattress is to use a pump. Sometimes the pump may be included - from the same manufacturer. If not, you will need a low pressure pump:
- manual;
- foot;
- electric.
An electric pump is justified if you have constant access to energy - in the house or at least from a car battery. If not, then choose a foot pump.
We inflate the mattress according to the rules
How to inflate an intex mattress? Electric pumps cope with their task in as soon as possible, but the inflation process should be carefully monitored - excess air can easily damage the mattress. Fine inflated mattress- elastic and without folds, it should be comfortable - so adjust the rigidity of the sleeping place while inflating. It is ideal if 3/4 of the mattress is filled with air, but if you plan to use the product in the open sun or for several people, then you should inflate even less. If you fill the mattress completely with air, you can cause ruptures of even the strongest seams.
Important! Want to check the reliability of your mattress? Inflate it and leave it for 12 hours - during this time the loss of elasticity should not be more than 10%.
What to do if there is no pump?
There are also situations when you need to inflate a mattress, but there is no pump. It is clear that the strength of your own lungs is not enough for such a volume, but how to inflate a mattress without a pump?
You can use a vacuum cleaner as a compressor - you need a special attachment for this. It attaches to the outlet of the mattress and fills it with air in just seconds. With the help of this universal device, the question of how to deflate a mattress is also solved.
By the way! If you are outdoors and don’t have a vacuum cleaner, you can use original way- Collect the air in a large garbage bag, then secure the edges of the air bag and “push” it onto the hole in the mattress. Press the air bag - the air will flow into the mattress.
Deflating the mattress
So that the product retains positive traits as long as possible, you also need to know how to deflate an air mattress correctly. IN modern models For mattresses, this issue is resolved quite simply, because they are equipped with large special valves through which air escapes very quickly. Press lightly on the surface to speed up the release of air, but not too much as this can damage the seams. You can also use a pump for these purposes - then the process of deflating the mattress will be very fast and safe.
An air mattress is a very comfortable and affordable thing. When folded, it takes up very little space, less than folding beds, hammocks, and futons. At the same time, when unfolded, it is a comfortable sleeping place with a flat, elastic surface. It is convenient to take it with you on a hike, to the dacha, or to purchase it at home to organize an extra bed.
And, with proper use, the air mattress will last a long time. In particular, the air mattress must be stored folded and dry.
So how to fold an air mattress?
First of all, you need to dry it well so that mold does not form during storage. It is necessary to dry the mattress naturally, away from open flames and heaters, so as not to damage it.
If the mattress becomes dirty, clean it with a gentle soap solution. Do not use chemicals or products containing abrasives.
After drying completely. This can be done simply by opening the valve or using pumps that have a download function. Air mattresses with a built-in electric pump are the easiest to use, as they inflate and deflate on their own in a couple of minutes.
Once the air from the mattress has been completely released, you can easily fold your air mattress like a sheet. If the kit includes a special cover, then roll the mattress and place it in the cover.
How to fold an air mattress into a box?
Do all the same manipulations described above. If the air is completely released, the deflated mattress easily folds into the size of the box and is stored in it.
Follow the rules for using an air mattress, then it will not disappoint you and will give you calm and comfortable dreams for many years.
You can purchase inflatable furniture for your home and garden in the catalog of the VseDlyaSna.ru online store, where you can find:
- air mattresses and beds;
- inflatable chairs and sofas.
Comfortable sleep anywhere? Choose air mattresses!
There are a considerable number of alternatives to a regular bed, among which air-inflated mobile options are especially popular. The only difficulty that users encounter in practice is searching correct option how to deflate an air mattress. The actual difficulty lies not in removing the bulk of the air, but in completely eliminating it from the cylinders.
You can pump it up using a manual or electric pump, and it takes a lot of effort and time a small amount of. Here too individual characteristics, but it is not easy to notice them when performing a task.
Peculiarities
To quickly deflate an air mattress, you will need to adhere to a whole set of requirements. But at the very beginning, the surface is prepared for storage. To do this, the material is cleaned with soapy water without aggressive chemical cleaners. The surface of the product dries completely on its own without the use of any heaters.
Particular attention is paid to the valves on the mattress through which air is released. There are 3 options for these products:
- Classical. First, the product protection is unscrewed, after which the valve is slightly compressed to allow air to escape. A common technological solution due to its combination of simplicity and reliability.
- Bicycle. The valve is compressed on both sides with your fingers or using a match, we press on the nipple in the central part. The product is twisted by two or more people, because it is impossible to do it alone.
- Removable. This valve model stands out for its simplicity among analogues, because to activate it, you just need to unscrew the plug, after which the mattress deflates itself as quickly as possible.
A single product deflates in 10-20 minutes, after which it is packed in a special bag or other structure for subsequent storage. You cannot leave an air mattress in direct sunlight, as this will cause it to quickly deteriorate.
Before asking how to blow air through a valve from an air mattress, let’s take care to eliminate common mistakes in advance.
Most people in such a task make the following inaccuracies:
- Surface. It should be as even as possible, because this will eliminate even slight retention of air in the product.
- Items. When deflating, the likelihood of punctures and cuts is especially high, so sharp objects must be removed away.
- Heaters. Sources high temperature deform the rubber base of the product, so it is advisable to move them away from the assembly site.
- Minus. Freezing temperatures destroy rubber and a number of other materials, which is why they should not be kept indoors.
- Pumps. Only special models with low pressure are used, because in this case ideal air removal is ensured without damage to the elastic structure.
Avoiding them is quite easy if you prepare in advance and don’t rush. Before sending each air mattress for storage, we carefully inspect it for damage and stuck objects, so that when waiting for the next use, the condition of the product does not deteriorate. In this case, the result always turns out to be expected.
How to deflate an air mattress
To deflate as quickly as possible, you will need to follow simple instructions. The process is carried out strictly according to the plan described below:
- Initially, the valves open so that the air escapes under its own weight;
- the mattress is then rolled up to concentrate the air in the area of the valves;
- when there is nothing left inside the cylinders, the air mattress is folded for subsequent storage in a special bag or box.
You cannot make any effort or try to increase the speed, because the air itself comes out as quickly as possible. Therefore, haste is likely to damage the product. Next, the mattress is put away for storage, and subsequent inflation will not bring any surprises.
How to flush with a pump
If you are wondering how to deflate an air mattress using a pump, then the process here turns out to be much simpler and faster. After preparatory work and deflating air under its own weight, the following series of steps are performed:
- the pump is connected to the valve, and the remaining holes are clogged (in some models 2 or more valves are used);
- air is removed using draft;
- the pump is detached and the product is folded for storage.
Proper deflation of the mattress will allow you to get the perfect result without wasting time and effort. In addition, the structure will remain in perfect condition, making it possible to use it in the future without the slightest fear.
