home
Healthy eating
DIY airplane from scrap materials for children. How to make a paper airplane (12 best patterns) Craft airplane from plastic for boys

DIY airplane from scrap materials for children. How to make a paper airplane (12 best patterns) Craft airplane from plastic for boys

26.06.2020

Crafts-souvenirs. Equipment series - airplanes
Gnevanova Olga Mikhailovna, teacher additional education,
GBU SON SO "Center" social assistance family and children" Kachkanar, Sverdlovsk region.

Purpose: for teachers of additional education, teachers of preparatory groups.

Purpose: airplane souvenir toy. Present younger brother as a toy. As a gift for dad and grandpa.
Target: developing children's ability in arts and crafts through modeling.
Tasks:
- development of imagination, imaginative thinking, imagination.
- formation of independent paper modeling skills.
- nurturing a sense of gratitude, recognition and love for the older generation.

Progress:

February 23 is Russian Army Day!
The guns are firing upward, everyone is delighted with the fireworks.
They send gratitude to the soldiers from the whole country.
That we live without war, peacefully and calmly.
My grandfather served in the army, my father received awards.
So I decided a long time ago that I would join the army.
I know, I need to grow up... I need to become more mature...
But I know how to behave like a man!
I protect the small and weak in the yard
And I celebrate Army Glory Day in February!
I would be able to carry out tasks like a soldier.
I will ask you to accept me into the army in advance.
Bokova Tatyana
Most boys from early childhood are interested in technology - cars, trains, airplanes. They are interested in everything that is connected with these objects, as in real life, and in everyday activities - reading, games, creativity. Therefore, if you want to captivate your child with creativity, invite him to make a toy like an airplane.

Required material:
- clothespins
- wooden sticks
- gouache (acrylic paints)
- tassels
- PVA glue, moment
- scissors
- stationery knife
- a piece of handicraft paper
We paint the main wings of the airplane with blue paint.

We paint the main part of the plane with red paint.

We make the hind wings: cut the stick in half and round off the cut edge with scissors.

Making the tail of the plane. We cut off 1 cm from the stick, but with a stationery knife. The edge is not smooth.

Sand with sandpaper.

We paint and glue.

The aircraft parts are painted.

Glue together the parts of the airplane.

Let's draw a propeller. Cut it out.

Using a decorative pin we secure the rotating part.

Our plane is ready. Children will get a lot of pleasure from such a toy.

Another variant crafts - souvenirs from paper “Flower plane”

Required material:
- blue cardboard
- Matchbox
- scissors
- PVA glue, moment
- applications
- cork
Using the stencil, we cut out the airplane parts.
Photo 1

Photo 2

Glue the matchbox. Cut out a strip from cardboard. Glue it.
Photo 3

We glue identical blanks on the other side.
Photo 4

Photo 5

Tail. We cut out a strip of 5 cm * 1 cm. We round the edges on both sides. We divide the strip into three parts of 1.5 cm each. We bend it using a craft knife.
Photo 6

Photo 7

Glue the stars.
Photo 8

Photo 9

Cut a circle from the cork.
Photo 10

Glue it.
Photo 11

Photo 12

Let's make a propeller. More details in the previous master class.
Photo 13

Using a needle, pierce the cork and secure the part.
Photo 14

From colored paper using a decorative hole punch we get small flowers.
Photo 15

We will paste over our airplane. It turned out funny, didn't it? Do you agree.
Photo 16

Greetings, my dear readers.

And in our family, as always, there is a rush - the whole point is that my son Vadik remembered that at school tomorrow he was assigned to make a craft from waste material. And this, as always, comes to mind the day before class: (Well, nothing, unlike the same, or - I think we’ll get by with a couple of hours. Waste material- this is what remains from our human activity:

paper egg cells
plastic and glass bottles
old car tires
spare parts for all kinds of mechanisms
cardboard packaging

From all this variety, an empty 0.5 liter Coke bottle was chosen and the little one and I decided to make an airplane. I will describe the whole process step by step and attach a photo.

Required tools and materials

Scissors
Glue stick
Colored cardboard
Stationery knife
Ready room
Ruler
Plastic bottle
Simple pencil

How to make an airplane from a plastic bottle

Our wing will be solid. To make it, we glue the cardboard with glue to increase the density.

We take a compass from the preparation tool and give the wing rounded edges. Then carefully cut it.

Here is the result - the wing is ready.

How to make an airplane from a plastic bottle - video

Making the tail section of an aircraft

We cut out two parts and connect them into a single whole. In a plastic bottle, use a utility knife to make slits for the wing and tail. We insert the blanks we made and get the result.

Then we cut out 5 stars from red cardboard - two for the wing and two for the tail, and one will go to the front part (cork), which we previously colored with a black marker.

I also drew on the wings and stars on them with a marker.

Making a propeller

We glue the blue cardboard in half and place the airplane on it with its neck. We outline the outline of the neck and cut out a hole with a stationery knife.

Using a compass, we round the edges, put it on the neck and secure it with a cork - the proller is ready.

We make the chassis.

We cut out two identical parts and make two slots for them in the bottom of the plane. Try to maintain alignment. Glue two wheels to the mounts. I'm drawing a tire.

Well, that's all, my friends.

In a couple of hours my son and I made a plane out of plastic bottle with your own hands.

Now the little one won’t get a bad mark, but dad will be happy!

Boys love to make cars or military equipment. An airplane for February 23 will be an excellent handmade gift. There are many materials in the house from which you can construct an original craft.

Airplane made from a plastic bottle

Prepare the following tools and materials for crafts:

plastic bottle with a narrowed neck - 0.6 l;
cocktail tube or balloon stick;
bottle caps for chassis;
cardboard and newspaper;
scissors;
PVA glue and heat gun;
paints with a brush.

The sequence of assembling an airplane from a bottle:

A plastic bottle is completely covered with pieces of newspaper using PVA glue. After this, the workpiece should dry.
The wings of the airplane, its tail section and the propeller are cut out of cardboard. Newspaper is also glued to the wings and propeller. The parts are drying.
For the chassis, take a plastic tube from a cocktail or a ball. Using a glue gun, the plugs are glued to the tube.
The wings and tail of the aircraft are secured with hot glue.
A cork is glued to the bottom of the bottle, and a screw is attached to it, after which the chassis is attached.
The upper and lower wings are connected by tubes, which are attached to hot glue. The tail part is covered with pieces of newspaper. You should wait until it dries.
The airplane craft is painted with paints or gouache and varnished.

Cardboard airplane

People often buy household appliances that end up with cardboard boxes. They can be used to make an airplane. The size of the craft depends on the size of the box. It is best to create an airplane together with a child, who can easily master construction skills by cutting out and gluing the parts of the toy.

To create you may need:

cardboard from a packaging box;
scissors;
PVA glue;
stapler and tape for fastening parts.

A rectangular parallelepiped is formed from cardboard, resulting in a narrow and long box. You need to cut out portholes and a door on both sides. After this, if desired, the doors are glued with tape.

A narrow rectangle is held together with glue, a stapler and tape to form an airplane body. The tail is made: a small narrow strip is cut out, which is divided into 4 parts with a pencil. The two middle parts are connected. Three cuts are made in the back of the body. Where is the tail inserted?

For the wings you need to cut two narrow and long strips. Using adhesive tape they are attached to the body at the top and bottom. To ensure that the structure holds well, jumpers in the form of posts are glued between the wings to support them.

The front of the aircraft is covered with a rectangular-sized piece to which the propeller will be attached. It requires two parts that resemble a bow; they are glued to the front. If the craft will be painted, then it is best not to use tape.

Unusual materials

You can make a clothespin airplane with your own hands with small children.

To work you need to prepare:

wooden clothespin;
an ice cream stick or cardboard from which you can cut out the desired design;
cotton swab;
some cardboard of any color;
glue.

Blanks for the propeller and tail section are cut out of cardboard.

To make wings for an airplane, you need to insert an ice cream stick between the clothespin.

A propeller is inserted into a cotton swab and clamped at the base of the clothespin.

The tail is made like this: a strip of colored cardboard the right size is divided into 4 equal parts, after which the two middle parts are closed, you get the tail of an airplane, which is attached to a clothespin with glue. The finished aircraft is optionally decorated with various patterns or completely painted over.

Plasticine airplane

Military aircraft are of interest to many boys, so children will be happy to try to make them from plasticine.

Prepare the following items:

several green plasticine blocks of various shades;
gray and blue plasticine;
match;
stack.

Procedure:

First, put the plasticine in a warm place, check if there is a stack in the box.
By mixing several shades of plastic material, you can get the base of the desired shade to create a military aircraft. Next, knead the plasticine ball well in your hands.
2/3 of a piece is torn off from the resulting mass and rolled into a sausage (the shape should resemble a carrot), resulting in an airplane body blank: the narrow part is in front of the aircraft, and the wide side is the rear part.
Roll a small ball of plasticine blue color, glue it, giving it an oval shape, closer to the bow of the aircraft. This part will become the cockpit.
The remaining green plasticine is used to make the wings and tail. The wings should be oblong; they are attached symmetrically on both sides of the body.
4 parts are attached to the wide part, their design resembles a boomerang - this is the tail of the product.

Since the plane is a military fighter, additional devices are being prepared - rockets and turbines. To do this, small tubes are molded from gray plasticine - these are turbines, and holes are made in them with a match. Rockets are also made in the form of tubes pointed on one side. Two turbines are glued to the back of the plane, and rockets are glued to the wings.

Airplane made of wood

For a wooden airplane, plywood is used. If the child is still small, then the help of an adult will be needed, but for 12-13 year old boys such a craft will not be difficult. Externally, the wooden aircraft will resemble the Yak-12.

Prepare the following tools and materials for work:

- Plywood or thick cardboard;
- jigsaw;
- a sheet of paper on which the template will be drawn;
- pencil;
- if you use plywood, then you need sandpaper.

A drawing of all the parts is made on paper, after which all the parts are cut out. If you print them on a printer, you can increase the size.

The cut out templates are applied to the plywood and traced along the contour.

Using a jigsaw, these parts are cut out and the craft is assembled. There is no need for glue, since the necessary elements are inserted into specially made holes. Now it's time to decorate. This part of the work can be done by the child, coloring the toy as he wishes.

Paper airplane

Children can be offered another version of a paper airplane. To make it you will need:

cardboard, maybe colored;
glue with scissors;
Matchbox.

Two strips are cut out of cardboard, the width of which corresponds to the dimensions matchbox.

To prepare the tail, you need two strips 1.5 cm wide. Two small strips, 8 cm each, are cut from one narrow strip. A narrow long strip is glued to the box, going around it.

Blanks for the wings are glued on both sides to the matchbox perpendicular to the tail.

One small strip is glued to the tail part, pre-cut in a semicircle along the edges. Another strip is bent into a house and glued to the tail section.

A propeller cut from the same paper in the form of two drops connected in a circle is glued to the bow. The plane is ready.

The craft may be sloppy the first time, but the main thing is that the child did it himself. The task of adults is to guide the child, to help in difficult times, but not to do everything for him. This is how the child learns independence and gets involved in work. Aircraft crafts for children can become exciting activity, and, perhaps, will influence the choice of future profession of young inventors.

Many parents want to give their baby only the best. Some give a huge number of gifts, while others try to spend more time with their child. In this case, making an airplane with your own hands will help your child develop fine motor skills hands, develop qualities such as perseverance and patience. You can make an airplane with your own hands from scrap materials from plasticine, cardboard or a matchbox, or from candy. This product is perfect as a gift or they will decorate your home, giving some coziness. In this article we will look at the most popular options for making an air apparatus with your own hands.

Simple option

The process of making a do-it-yourself airplane from plasticine can be traced using the example of a master class with step-by-step photos. In each option, you need to consider the entire aircraft structure.

To work you will need plasticine, matches and glass.

The colors of plasticine can be the most unusual, bright, variegated, or you can choose realistic and natural shades (gray, blue, white). Some of the most popular aircraft options are made in black-gray and white-blue combinations. Take plasticine of the required color, soften it in your hands and form a ball.

Then pull the ball out into a sausage. This can be done between handles or by rolling the sausage back and forth on the board.

Use your hands to press down the sausage a little. Then sharpen the front of the sausage, and then round it into the shape of a real airplane. Thanks to this trick, you have a beautiful airplane nose. Take black plasticine and sculpt a large window in the pilot's cockpit. The shape of such windows resembles a crescent.

After this, we fashion wings from plasticine. If you want to make a beautiful airplane, then the wings should not be thick, but they should not be very thin so that they do not fall. The wings must keep their shape.

Then take black plasticine, pinch off small pieces of it and attach it to the top as porthole windows on each side of the plane. Make a couple of barrels and have matches ready because you will need to make turbines.

We attach it to the bottom of the turbine housing and wings.

After this we make the tail. To do this, we fix the triangular elements at the back of the toy.

This is the airplane we made from plasticine.

Cardboard airplane

Using the following step by step instructions you can make an airplane out of cardboard and matchboxes with your own hands in literally 15 minutes. This manufacturing option is very simple and even a child can handle it. In this case, you will need a little help from an adult to cut out the strips, but if the baby can do it himself, then the help of an adult will not be needed.

The first step is to cover the matchbox with paper. We cut out a strip of paper, three cm wide. After that, fold the strip in half and glue it along the edge to the matchbox.

After this, draw two blanks - rectangles - on the cardboard. After that, round the edges and cut out. The width of these rectangles should be a couple of mm larger than the width of the matchbox. Cut one small strip and bend it into English letter"V". And also two more blanks for the tail.

Then glue all the parts together. Like this beautiful tail we succeeded.

Airplane wings can be decorated with stars or other decorative elements. We make a propeller from small strips, which we attach to a button or glue to the front of the aircraft’s body. We have created such a beautiful aircraft, the manufacturing process of which is understandable even for children.

From paper and sweets

In the next photo you can see a diagram with which you can make an airplane out of paper using the origami technique.

The process of making a toy on a pedestal can be traced using an example step by step photos With brief description. We are sure that both children and adults will like this gift, and it is very easy to make.

To make a candy plane, you will need to prepare materials such as candy, a box, cardboard, paper, glue, tape, a pencil, a paper towel cylinder and a bottle cap. And prepare the tools glue gun, stationery knife, ruler.