Have you noticed how varied and colorful modern manicure has become? Nowadays, in order to please yourself and amaze others with an original nail design, you don’t need to visit expensive salons. A few simple recommendations will help you cope with this yourself by doing water manicure at home. Prepare everything you need, be patient, and get started with that interesting creativity.
What you need for a manicure
Before you do beautiful manicure at home, you need to prepare your nails: remove cuticles, softening them with aromatic oils or steaming them in a solution sea salt. Then give your nails a certain form using a nail file or, if necessary, sanding. Remember: unkempt nails will negate all your efforts to create the most exquisite patterns and unique coating.
To ensure that everything is at hand for performing water manicure at home, prepare the following materials and tools:
- dishes, preferably transparent;
- clean water at a temperature not higher than 38-40°C;
- varnish base;
- transparent fixative;
- nail polish of two colors or more - at your discretion;
- toothpicks;
- nail polish remover;
- greasy cream, tape or glue to protect the skin around the nail plate.
How to do water nail art at home: step-by-step instructions
An important component of the image is style, so it would not be amiss to mention colors. So, what kind of varnish do fashionistas need:
- For lovers of bright manicures, varnishes of contrasting colors are recommended; patterns with them have clear transition lines and a more pronounced pattern.
- For those who prefer “marble” coatings, shades of the same color scheme are suitable. For example, the use of blue, turquoise, and emerald gives a delightful malachite tone. An interesting manicure is also obtained by mixing pink and powdery shades - you get very delicate, romantic designs.
After checking the water temperature again and opening the bottles, you can begin to study the principle of creating a manicure:
- Protect your skin with any in a convenient way. In most cases, a thick layer of thick cream or Vaseline is used. Using tape is also effective, but labor-intensive, and even after removing it, sticky marks remain on the skin. Russian fashionistas apply glue, which provides a dense, elastic film and is then easily removed. It is important that protective agent didn't numb on nail plate, otherwise the varnish will not lie evenly.
- The next step is to apply a transparent base or white varnish, which will emphasize the brightness of the main pattern. Wait for the coating to dry completely.
- Start creating your own unique water manicure at home: place the first drop in a container of water and wait a little. After it spreads, drop a varnish of a different color into the center of the stain. Repeat the procedure another 5-10 times.
- Using a toothpick or tip wooden stick create a pattern. In this case, after each dipping of the instrument, it must be wiped with a cotton pad or cloth.
- By bending your hand and finger so that the nail plate falls parallel to the water surface, dip your nail. Pull it out slowly so that the pattern lies evenly, while the remaining varnish is removed with a toothpick while still in the water. Do this with all the nails one by one.
- After the coating has completely dried, remove the protective layer from the skin around the nail and clean it with a cotton swab slightly moistened with nail polish remover.
- If desired, glitter and rhinestones are applied to the manicure, and additional details are added to the resulting pattern. When finished, the nails should be coated with a fixative.
Possible mistakes when creating a manicure
Sometimes things go wrong at first, especially if you have never done nail art at home before. Here is a list of common problems and how to fix them:
- A drop of varnish does not spread, but sinks. The reasons for this are unsuitable water temperature or the brush is located above 2 cm from the surface of the water.
- Spreading stains do not form patterns well and are difficult to apply. The problem is that the composition dries quickly, so it is easier to work with liquid varnishes. It is difficult to make drawings on the surface of water that is too warm, but at cold temperatures any varnish will dry out very quickly.
- Unsuitable container. When doing a water manicure yourself at home, it is more convenient to use wide bowls, but in this case the consumption of varnish increases. However, it is difficult to carefully place your finger into a narrow glass.
- Fuzzy drawing lines. The reason for this is a poorly cleaned toothpick, on which particles from the previous mixing remain. Just make sure to thoroughly clean your instrument before each dive.
- Uneven distribution of varnishes of different colors. The reason is the different structure and density of the varnishes used. To get a high-quality manicure with water, you will need fresh varnishes, preferably from the same manufacturer.
Video tutorials: water manicure technique for beginners
Having gained some theoretical knowledge about correct application water manicure, watch short videos that will help you better consolidate your acquired skills and do each stage of the work yourself. In addition, a visual image will help you navigate the choice of colors for the varnishes used, and will introduce you to the basic techniques for creating popular patterns and unique designs. At first you may not be able to do it as skillfully as experienced craftswomen, but you will gain inspiration and ideas for manicure.
And the effect tie dye– these experiments are possible thanks to special water technology. Let's figure out what its features are, find out what tools you will need and how to use them, so that the result is beautiful water nail art.
© another.nail.in.the.wall
For those who are unfamiliar with various manicure techniques, it is immediately difficult to imagine what a water manicure is. The coating turns out to look like paint stains on the surface of water and, in fact, this is how it is created - with the only difference being that colored varnishes are used. Drops different shades mixed on the surface of the water, and then the resulting pattern is transferred to the nails - with a bright film.
Features of water manicure varnish
© another.nail.in.the.wall
Due to the specifics of the technology used to create water manicure, the question often arises: are all varnishes suitable for such purposes? There are indeed some restrictions. To avoid additional difficulties, follow a few recommendations:
First, try to use polishes of the same brand. Please ensure that they are of high quality.
Secondly, there is no point in taking quick-drying varnishes - they will harden on the surface of the water in a matter of seconds, and it will no longer be possible to fix the coating on the nails.
Thirdly, the varnishes must be fairly fresh. If they begin to thicken and acquire a viscous consistency, then you won’t be able to do a water manicure with their help. Such varnishes do not spread over the water surface in the desired way, therefore, creating a pattern is out of the question.
- The varnish consumption with this technique is quite large. You will need not a couple of drops, but much more. Be prepared for the fact that the bottle may be a quarter or a third empty after one procedure.
What you need to do a water manicure at home
Have you decided to try out the water manicure technique? You need to prepare in advance: there are a number of tools and items that you cannot do without during the process.
Lucky
You will need at least two shades. The more contrasting the colors, the more expressive the patterns will be. Don't forget about the base and top - without them, the manicure will hardly be of high quality.
Water container
It should be deep enough, with wide edges - this will make it easier to transfer designs from the surface of the water to the nails.
Toothpick or needle
With their help, varnish stains on water are mixed with each other to create a pattern.
Scotch
Regular paper tape is what you need! You will need it to protect the skin around your nails from polish.
Cotton pads, orange sticks, nail polish remover
They are indispensable for correcting manicures and for removing excess polish from the cuticles and other areas that will be affected in the process.
Fat cream
This product has a dual function. Firstly, if you treat the skin around the nails with it in advance, it will be easier to remove the film from the varnish. Secondly, cream is good for softening the cuticle after the manicure is ready.
Step-by-step instructions: how to do a water manicure
© another.nail.in.the.wall
The first experience may leave the impression that such nail art is a lot of hassle, but each time this technique will become easier and easier. Before doing a water manicure for the first time, study step by step instructions on its creation.
Preparation
Collect everything necessary materials, tools and means. And also treat your nails: trim the shape, push back the cuticles, apply base coat.
Creating a drawing
Add a few drops of varnish of the same shade to a container of warm water and wait until they spread across the surface of the water like a colored film. Next, in the middle of the resulting color wheel, you need to drop a varnish of a different shade - and repeat this with all the colors that you are going to use in the manicure. Then use a toothpick or needle to blend the borders between the colors and create beautiful streaks that look like an intricate pattern.
To prevent the skin around you from getting dirty while transferring the design to your nails, apply a thick cream to the cuticles and seal the border areas of the skin with paper tape. First, provide such “protection” to one hand, and then, when the manicure on it is ready, do the same with the other.
Transferring a drawing
An important point: the finger must be lowered into the water so that the nail is under the varnish film. This is how it will attach to the surface of the nail plate. After holding your finger under water for a while, take it out - already with a pattern on the nail.
Cleansing
After the film on your nails has completely dried, remove the tape and remove excess polish. special liquid.
At the end, after cleaning the area around the nails, apply a top coat-fixer to them, which completes the manicure.
Options and ideas
You can experiment with it to your taste: use a toothpick to draw wavy lines, spirals, zigzags and other patterns onto the varnish film - the result in any case will be expressive and unusual. Get inspired by our selection of Instagram photos.
Nail design with water- one of the most simple ways create something unusual on your nails at home. Any girl can do it - you just need to have a couple of nail polishes on hand :) In this article you will find step by step lesson performing water design, as well as tips on how to make it and what needs to be taken into account (features of varnishes, water and other tricks).
Water manicure: video
Technology for performing water manicure at home
Water design is that with the help of several varnishes and their fluidity properties in water, a film with a pattern is created, which is then easily transferred to the nails.
What do you need for a water manicure?
- Container with water
- Several varnishes (from 2 to 4, it’s better not to take more)
- Toothpick, needle or orange stick
- Nail polish remover, cotton pads and cotton swab
- Oily hand cream or tape
How to do a water manicure?
1. The first step is nails prepare for design, that is, if it has grown and give the nails the same shape using a file. Next, it is also advisable to apply and let it dry.
2. Now let's get started design on the water. To do this, take several varnishes one by one and drop them into each other in water, creating multi-colored nested circles.
3. Then using an orange stick or needle from these circles an abstract drawing is being made. You can come up with many options for creating it; it is very beautiful when a flower is made from circles by bringing lines from the edges to the center.
5. Dip your finger into the water, pointing the nail at the drawing. After holding it in the water for a few seconds, extend your finger. Carefully remove excess polish around the nail using cotton swab and nail polish remover. For the surface at the very edge of the nail, you can use a thin brush.
6. A similar procedure is done with all other nails. After the water and varnish have dried, a fixative is applied to the surface of the nails for additional shine and preservation of the design. Water manicure is ready!
8 secrets of water manicure from personal experience
It happens that you can’t do a water manicure the first time: the varnish doesn’t spread and girls give up on it. Therefore, here I want to look at the main problems that may arise and how to solve them.
- When performing water manicure, it is necessary that the water temperature was room temperature. In cold water, the varnish will not spread, but will simply harden. It will not be possible to make a drawing in very warm water.
- Some varnish brands may not be suitable to perform water-based nail designs, since they also contain water in their composition, so all that remains is to test. In general, water-based manicure polish should be liquid so that a drop can fall.
- Only one nail is made from one drawing on water. After this, you need to collect the remaining varnish that is still floating, and it is better to change the water periodically (1 change for 3 nails).
- Many are afraid that Water manicure uses too much polish, however, in fact, its consumption is absolutely the same as with regular nail polish. And to save money, you can take a water container with a smaller diameter.
- Necessarily lubricate the surface around the nails with cream, every girl probably has one. However, you must not let the cream get on your nails - otherwise the design in this place simply will not work.
- After you take your finger out of the water, let it dry thoroughly. Remember that polish with water takes a little longer to dry than with regular nail polish.
- When you put a drop in water, the brush should not come into contact with the surface, but should not be too high. In the first case, the drop will not spread well, and in the second, it will first sink. The ideal distance is 1 centimeter above the water.
- Patterns may vary greatly on each nail.. On the one hand, this gives water manicure its own zest. But if you want it to be the same, you will have to practice both in drawing on the water and in correctly prying the design with your nail.
The first drops spread very strongly and the color of the varnish can become very light, almost transparent - don’t be afraid of this, just make more drops and dip the nail into the middle. Also, for greater color intensity, you can apply the base color to the nails before performing the water design. After the drawing has dried, you can additionally apply rhinestones, sparkles, bouillons - whatever your heart desires :)
And remember – practice makes perfect! Try it, and over time you will definitely get your perfect water nail design!
Water manicure: photo
And finally, a few photos of interesting nail design ideas using this technique on water.
Manicure is a means of self-expression and art. In the race for originality and beauty in nail art, all kinds of varnish colors are used, additional elements, different techniques coating application. Thus, a special technique for applying water manicure allows you to achieve bright color combinations and fancy patterns on your nails. Such a seemingly complex design can be completed independently and without additional equipment. So, let's reveal the secrets of water manicure.
What is water manicure
Water manicure is a separate trend in nail design, which is considered relatively new and very popular nowadays. The process of applying varnish itself is extremely entertaining and unusual, since for such a manicure we need water.
Water plays an important role in the process of creating water manicure.
This procedure can be performed at home, since it does not require complex manipulations or additional equipment.
Water manicure at home
To do a water manicure yourself, you need to purchase two or more ordinary liquid varnishes. Frozen and old products cannot be used. In addition, gel polish is not suitable here, since its structure is too dense. The procedure requires plain water temperature not higher than 40 o C, in otherwise the drawing may not work out.
For the procedure you will also need:
- wide water tank,
- regular or paper tape,
- nail scissors (or tweezers),
- classic baby cream or coconut oil,
- cotton swab or sticks,
- toothpicks,
- nail polish remover,
- base coat for nails,
- fixing coating for nails.
Water manicure: step-by-step instructions
- Before starting the procedure, if necessary, remove excess skin around the nails, hangnails, and cuticles using nail scissors or tweezers.
- Degrease the nail plate. To do this, use nail polish remover.
- Apply colored polish to your nails (base coat). This will smooth the surface of the nail and protect the nail plate from yellowing.
- Take care of the area around the nail, as polish will get on it. To do this, either stick tape or lubricate the skin coconut oil or baby cream.
- Pour slightly warmed water into the prepared container.
- Drop a little varnish of the same color onto the surface of the water. After the liquid has spread, add another color. Two polishes will be enough to start with.
- Now you need to draw a pattern using a toothpick. Try until you like the image on the surface of the water. For example, if you move a stick from the center to the edges of the container, you will get a star.
- Place your nail under water and hold it for a while until the polish sets.
- Remove your finger from the container and wait until the product dries a little.
- Now you need to remove any remaining polish from the skin around the nail or simply remove the tape.
- Apply a fixative coating to your nails.
- The procedure is over. If desired, you can decorate all your nails this way.
The main problem that you may encounter during the procedure is a blurred drawing. This situation occurs because the coating does not have time to dry. To preserve the pattern, you need to be patient - keep your fingers in a horizontal position longer after applying the varnish film. Take your time, practice the water manicure technique more often - and an excellent result will be ensured.
Video: doing a multi-colored water manicure
Water Manicure Design Ideas
Rainbow water manicure. We remember the phrase “Every hunter wants to know where the pheasant sits” and combine varnishes of the corresponding colors. Don't forget about acid-colored varnishes.
Rainbow manicure will brighten up gray everyday life
Black and white water manicure is more strict and universal option. For this design you will need two colors. Black and white varnish must be dropped onto the prepared water and using a toothpick, create a fancy pattern.
Black and white water manicure will appeal to those who work in an office but want to try an unusual nail design.
Water manicure with stickers. The main thing is not to overdo it with the design. Stickers should be present only on two or three nails, and the design should be as discreet as possible. In order to make such a design yourself, you need to perform a water manicure in the classic way. Then select additional elements for nail art and fix them on the surface of the nail using special glue. Finish the manicure with a fixing varnish.
It is important that the manicure is harmonious
Water manicure in blue tones. In order to make such a design ourselves, we will need blue, beige and dark blue varnishes. The difference from the classic method of performing water manicure is that you need to drip varnish three times each. Thanks to this, there will be more stripes on the nails.
Water manicure in blue tones looks quite restrained and at the same time unusual
Water manicure “Neon spots”. To make this design, you must first coat your nails with colored varnish. Take yellow, pink and green colors. Apply them to the nail plate in strips. Now drop some black polish onto the surface of the water. Use a toothpick to swipe through the liquid. Make sure that the varnish remains on the water in small spots. Now dip your finger into the container and then remove the remaining film in the classic way.
Water manicure “Neon spots” looks very unusual and suits brave girls
Water manicure in black and pink tones. To implement this design, you first need to cover your nails with pink polish. Now you need to drop black into a container of water. Use a toothpick to sweep across the surface to create spots. Then dip your nails in water and polish alternately. Upon completion of the procedure, remove the remaining varnish film from the skin.
Black varnish is universal, so it can be combined with coatings of any contrasting colors
French water manicure. One of the versions of the world famous design. To create such a design, you need to dip only part of the nail in water with varnish. The colors of the varnishes can be chosen at your discretion. This manicure option looks great on long nails.
A beautiful manicure can be done at home. Apply beautiful drawing Even those who do not know the art of painting can paint their nails. The procedure takes a long time, but if it is carried out correctly, the result will justify all the efforts.
- Sufficiently deep container. You need to pour cold clean water into it. You should pour in as much water as possible.
- Fat cream or tape. They will be required as a means of protecting the skin from the distribution of varnish. These are optional devices, since some people create this manicure without a protective base.
- Skewers, if you have a toothpick.
- A special preparation for removing varnish.
- Items for removing protruding parts of the coating.
- Multi-colored nail paints. Do not use thickened or dried products. The more liquid (fresh) the varnish is, the better remedy lies on the surface. If you wish, you can take not 3, but 4 or 5 shades. The richer the palette, the brighter the manicure looks.
- Transparent varnish, it is advisable to choose bright options creating a beautiful glossy finish.
- Base coat for manicure.
Step-by-step instruction
To make this simple and beautiful manicure at home, you should follow a sequence of actions.
Step 1. Nails adapt to cover the surface beautiful pattern. Old manicure should be completely removed using special means for removing varnish. Nails are trimmed and filed until the desired shape is achieved. The cleaned and completely dry surface is covered with a transparent varnish that acts as a base.
Step 2. When the nails are fully adapted to undergo painting, you should limit the surface of the cuticle from spreading the varnish. You will need some tape. It is necessary to cover the area around the nail with tape at this stage of the procedure, since once the nails are painted, it will be almost impossible to do this yourself. If you don’t want to cover your skin with tape, you can use a rich cream. You need to be careful with this product. The cream should not get on the nail plate, otherwise the varnish on this area will not be durable.
Step 3. Pour cool water into a deep enough bowl. Its temperature should be optimal so that you can put your hands there. You should not use ice-cold or too hot water, as the liquid is not at the optimal temperature can affect the poor fixation of the pattern or even cause damage to the overall pattern.
Step 4. The optimal shades of varnish are selected. The bottles are opened and dropped drop by drop into the water. When each small dose is placed in the water, you must wait a few seconds to allow the product to spread through the water. In order for an interesting motif to subsequently form, you need to add at least 5 drops. Each subsequent drop is dosed from a new color of varnish. Each drop of varnish should be placed in the area of the previous one. Some varnishes do not flow well in water. To speed up this process, you should move the toothpick in measured movements along the water at the edge of the dish.
Step 5. When all the drops have completely spread throughout the liquid and settled, you can begin to form the pattern. Using a toothpick, you can draw clear lines along any part of the surface, as if dividing the area into fragments. The star pattern is popular. To form it, it is necessary to mark the center point and draw peculiar rays from the middle to the edges of the circle. To make the outline of a flower, draw lines in the reverse order, that is, from the edges to the central point.
If you use only one toothpick for all manipulations, you must constantly wipe it with a cotton pad. When working with a toothpick, you do not need to dig it deep into the solution. It is necessary to carry out only on the surface of the varnish layer.
Step 6. When the pattern in a common bowl is formed, you can transfer it to own nails. It is necessary to lower your finger into the water, pointing it with the plate down. All fragments separated from the main layer of varnish must be collected with a toothpick. Now the finger can be pulled out. To obtain random rather than predictable patterns, it is necessary to immerse your fingers in the water in a direction perpendicular, rather than parallel to the water level. At first, you should treat only one finger at a time, and if you have experience, both 2 and 3 fingers can be successfully immersed in the solution at once.
Step 7 The tape covering the cuticle around the nail must be removed. It should be removed along with any remaining varnish. If the protective coating was formed using rich cream, it must be carefully cleaned with a toothpick.
Step 8 It is necessary to apply the varnish in the same way to all nails of each hand. It is not necessary to cover all your nails with this pattern. It is enough to treat 1-2 fingers in this way, and the rest can be painted in one color or a different pattern can be created on them.
Step 9 Finally, a topcoat should be applied. Use a professional amplifier or clear nail polish with a fairly long service life. To create an imitation of a magical, fairy-tale design on your nails, you can decorate them with sparkles, choosing suitable places for this on the abstractly formed design. You can use rhinestones, pearls or cover the surface with shimmering varnish.
Possible mistakes when creating a manicure using water
If something doesn’t work out, it’s possible that the procedure technology was not followed correctly. Common mistakes:
- The container is too small or the liquid temperature is incorrect.
- Using a toothpick without cleaning it and not replacing a toothpick that is cracked or overly soiled.
- Hardened varnish. If it is too viscous, you need to apply special remedy.
- Incomplete removal of excess varnish after dipping your finger into the water.
To make a beautiful manicure using water, you need to prepare all the necessary materials, select the optimal shade of varnish in terms of color, and follow the technology for carrying out the procedure. If all conditions are met, you will get a unique design on each nail. This manicure looks great on any nails. Creates excellent nail art for both long and short nails.
Video - How to make nail stickers from water manicure
