Today we will teach you how to knit a scarf using a regular crochet - original in shape and bold in color - this is a characteristic of fashionable things this season. This type of clothing is intended not only to save humanity from bad weather. The special mission of a modern scarf is to complement and complete a woman’s or man’s look. The main requirement that all modern designers make of these accessories is that they are not boring and bright. All the colors of the rainbow are in fashion, and chocolate shades, yellow, and green are especially in demand. At the peak of fame are products with prints: zigzags, waves, ethnic motifs, stripes and checks. Long fringe and large knit– the “highlight” of a modern scarf.

This stylish and warm item of clothing simply must live not only on your closet shelf, but also in the wardrobe of your family and friends. Therefore, dear knitters, “get your sleigh ready in the summer” - take out your hook and threads and get to work. And to help you, this article provides information on how to knit a stylish scarf using a crochet hook for women, men, and children.

Crochet scarf option for beginners according to patterns

The scarf model shown in the photo is very light in design. Even a knitter who has practically just picked up a hook can knit it.

This product is knitted with two types of loops: single crochet (1st row) and single crochet (last row).

We will need 100% fine wool yarn of four different colors, 50 g each, hooks No. 4 and No. 4.5.

Size: width – 17 cm, length – 182 cm without fringe.

Knitting density: 14 stitches, 9 rows st. s/n. = canvas 10x10 cm.

Sequence of work execution.

Knit a chain of air loops equal to the length of the scarf. Row 1 is knitted in single crochets. Then knit the entire fabric with double crochets, changing the color of the thread in the right places to create stripes. The last row is knitted in single crochets. Make tassels along the edges of the scarf (widthwise).

Knitting pattern:

This striped accessory is suitable for women, men and children. It all depends on what color yarn you choose.

Openwork technique for performing work with description and instructions

So elegant openwork scarf can be a wonderful gift for your beloved girlfriend, sister or mother. Be sure that they will be very grateful to you for such a fabulous gift.

To knit this pattern you will need fine wool blend yarn - 50 g, hook number 3.

Knitting is done with the following stitches: chain stitches, single crochets and single crochets.

Step-by-step master class for beginners in needlework

Knit a chain of 37 vp. Next, knit 53 rows of fabric according to the pattern: 5 repeats of 10 rows + 3 rows. Then, on one and the other side of the scarf, tie a border with a “Pineapple” pattern. The border is knitted from 14 rows: from the 1st to the 8th row completely, from the 9th to 14th row each “pineapple” is knitted separately.

The knitting pattern for an openwork scarf is in the picture below.

The “Pineapples” pattern gives the product additional lightness and grace.

To add color to the product, use decorative elements. Or you can decorate the edges with decorative binding.

Model "Vivienne" with interesting additional ideas

A stylish, fluffy and at the same time very warm scarf is exactly what should always be at hand, or rather on the neck of every woman during the cold season. The Vivien model fully meets all these characteristics.

Look at the photo and see for yourself. A beautiful, original, warm knitted scarf by Vivien can warm your body and decorate your look.

The work takes place in two stages: first, the base of the scarf is knitted - a mesh, then a lush border is tied onto it.

We will need semi-wool or wool yarn - 250 g (the border is knitted in two threads), hook number 4.

The sequence of work is presented below.

Trying to knit a small mesh

Dial 15 ch. + 3 v.p. instead of Art. s/n. for the first row. Then knit another 2 ch, skip 2 ch. in the chain, and on the third loop knit st. s/n. Until the end of the row, knit in this way: 2 ch, skip 2 loops, 1 tbsp. s/n. The next rows are repeated. Double crochets are worked over double crochets to form a net.

Border for knitting along the fabric of the product

Unfold the knitting and knit a border along the scarf fabric:

1 row. Tie the edge of the product with single crochet stitches so that each “cell” has 3 stitches.

2nd row. Knit in stitches with 1 crochet, and from each 1 tbsp. b/n. knit 2 tbsp of the previous row. s/n. (due to this, the number of loops should increase by 2 times).

3rd row. Knit st. s/n., while again increasing the number of loops by 2 times (from each loop of the previous row we knit 2 tbsp. s/n.

4 row. Knit similarly to the third row, doubling the number of stitches.

5 row. Knit st. s/n. Increase the number of loops not 2, but 1.5 times: from 2 loops of the previous row, knit 3 loops. Finish knitting.

You should end up with a very elegant, neat product that should be worn with things that “match” it. Such a thing could be a dark contrasting turtleneck.

“Vivienne” pattern for more experienced needlewomen

Scheme of the "Grid" pattern.

To knit a border, you can use not just a pattern from st. s/n. The next photo shows the pattern options for the Vivienne scarf.

The originality of this scarf can be emphasized by combining different colors of yarn, as shown in the following photo.

Believe me, wearing such an accessory is a real pleasure.

In boutiques we are so often impressed lace dresses from thin threads on display cases! But few people know that such dresses, and even better, can be crocheted in one or two evenings even by an inexperienced craftswoman! Read about making dresses self made , step by step photos This article will help you achieve the best results!

Tube scarf to create a stylish look for every day

Remember the fashion of the 80s. At that time, almost the entire female half of the population wore a tube scarf or, as it was also called, a “collar.” This item is universal, it can be worn as a scarf, or you can put it on your head instead of a hat. In the 2015-2016 season, this accessory is again in fashion. The clamp has a new name - “snood”. A knitted tube scarf complete with mittens or mittens looks stylish, fashionable, and versatile.

Let's start our master class. Look at the photo: you will immediately be inspired to add such an accessory to your scarf collection.

Scarf dimensions: girth - 100 cm, height - 60 cm.

To knit this model of a tube scarf you will need 100% wool yarn - 450 g, hook number 3.

Basic pattern: the number of loops cast on for knitting must be a multiple of 6. Knit according to the pattern in circular rows. Start each row with 1 or 3 ch. instead of 1st tbsp. b/n. or 1st tbsp. s/n. accordingly, from the loops before rapport. Next, knit repeat loops and end with loops after repeat and connect with a connecting stitch in the third ch. rise. Knit 1 time from the 1st to the 3rd round, and then perform all rows similarly to the 3rd round.

Knitting density: 6 circular rows of 18 cast-on stitches = fabric 10x10 cm.

Step-by-step MK with detailed knitting pattern

Cast on a chain of 198 vp. and close them into a ring. Next, knit 33 repeats with the main pattern. When the fabric reaches 60 cm, finish knitting. Perform a “crawberry step” binding along the first and last circular row of the product.

Scarf - pipe crocheted. Wear it with pleasure! A charming image and a great mood are guaranteed!

See the video tutorial for an example of work.

We create a scarf-hood with a step-by-step sequence of work

Another original product is a crocheted scarf-hood. This accessory is designed to protect your head and neck from cold and wind. Its advantage is that it is both a scarf and a headdress at the same time. After reading the information in the next master class, you will be able to knit such a cute scarf-hood with your own hands.

To knit this model you will need yarn (50% mohair, 50% acrylic) - 300 g, hook number 3, elastic band.

Knitting density. 8 rows 1.5 repeats = 10x10 cm.

Left and right halves of the hood with gathering

Cast on a chain of 39 vp. + 3 v.p. rise. Next knit according to the pattern. Having knitted 70 rows, add 1 rapport per 10 rows to expand on the right. Complete 20 more rows and finish knitting.

The right half of the hood is knitted similarly to the left, only the extension is done in a mirror image.

Sew a hood. Along the first row of the left half, knit the pattern according to the pattern. Then continue along the pattern, while making decreases on both sides in every 2nd row of 1/3 repeat. At the end, perform a chain of v.p. – 15 cm, attach pompoms to it. Do the right half in the same way as the left half.

Crochet hood-scarf pattern:

Such a thing will not only warm you up, but will also become a stylish addition to a jacket or coat.

Warm, pleasant new thing for your beloved man

Scarves suit men too. They give the image elegance, severity and at the same time attractiveness. Look at the following scarf model. This one is classic male model, made with crochet, can be worn both under a coat and over a jacket, and can also be wrapped around the throat.

To knit this model you will need 100% wool yarn - 50 g dark gray (1) and 50 g light gray (2), hook No. 3.

Knitting density: 20 st. s/n. X 9 rows = 10x10 cm.

Important:

1. When changing colors, you must knit the indicated stitches. s/n. until the last two stitches. Then continue with a thread of a different color.
2. When knitting a section in one color, hold a thread of a different color along the top of the last row of sts. s/n.
3. When knitting 5-8 rows of the pattern after the last st. s/n., first 2 v.p. knit in the same color as the last st. s/n. 3rd ch. knit in a different color.

Description of the knitting sequence. Make a chain of 37 vp. and then knit according to the pattern. Repeat rows 1-8 14 times. Next, repeat rows 1-4 once. Finish knitting. Decorate the edges of the scarf with fringe.

Crochet pattern for a men's scarf:

Knit such a wonderful accessory for your beloved husband as a gift. The love you put into the product will warm you loved one both in the rain and in the cold. Warm words of gratitude and a strong kiss from your loved one are guaranteed.

Selecting a stylish model for young children

As you know, children do not really like to wear a scarf and strive to take it off all the time. Only very interesting and beautiful accessories. Look at the next photo.

This cheerful, cute crocheted children's scarf will surely please your baby. This bright accessory will make your child's outfit irresistible. This model is suitable for both girls and boys.

In order to make the “Lion Cub” scarf, you will need 100% wool or half-wool yarn of orange and brown color, hook number 2.

1 row. 10 vp, then 5 tbsp. s/n. above 6 -1 v.p. chains.

Row 2 and all subsequent rows are knitted according to the pattern: 5 vp, 5 tbsp. s/n. Knit to the length you need.

Then continue working according to the pattern with yarn of a different color according to the same principle: 5 ch. and 5 tbsp. s/n., but at the same time every 3rd v.p. on the left side it is knitted, capturing the arch from the vp. orange stripes. The work progress is shown step by step in the photo below.

The base of the scarf is knitted. All that remains is to complete the lion cub's face. To do this, knit a circle of the diameter you need, the edges of which are framed with a fringe of tassels. This process is shown in the following photos.

Decorate the muzzle with embroidery.

Children's scarf pattern:

An original and easy to knit accessory for a baby is ready. It will not only warm and decorate the child, but will also become the main character in children's role-playing games.

Knit things for yourself, your family and friends. Keep yourself warm and decorate your look. With a beautiful, unique, elegant and warm knitted scarf, no cold weather will scare you!

Knowing how to crochet allows you to create truly amazing things!

Beautiful scarves - very essential accessory for fashionistas. Therefore, it is often used not only by women, but also by men. Previously, scarves were worn exclusively in cold weather, but now you can meet many people who decorate their look with a light openwork scarf. Such accessories perform additional element in clothing and therefore can be of different knitting, shape and texture. Openwork crochet scarves are very much appreciated, especially if they were made independently. Crochet is always airy and light, so you can easily make such a scarf in a short period of time. Due to bright accessory you don't have to wear different decorative ornaments. And it can be worn under any clothes - hat, blouse, dress, skirts and even classic clothes allows you to wear such stylish scarves.

Lesson for Beginners

This master class will describe in detail how you can make an openwork scarf using a crochet hook. In order to knit this scarf, you do not need to create any pattern, which makes the work of the needlewoman easier, especially for those who are just starting to crochet.

Product size: 18 - 168 cm. For knitting you need to have: Pekhora “Successful” threads 100% merced cotton 220 m/50 g, 150 g of the selected color and hook No. 1.5.

You need to cast on a chain of 69 chain stitches - you should get 8+4 chain stitches and another 3 chain stitches for lifting. 1st row: in the 4th loop of our chain, we knit a double crochet and so on until the end of the row. At the end of this row, you need to knit an air loop for lifting.

2nd row: we turn the product to the other side and knit a single crochet from the primary buttonhole, and then you need to knit 5 chain buttonholes, do not touch the 3 buttonholes in the row and in 4 we make a single crochet with our 5 chain stitches - an arch is formed. We begin to knit a picot from 3 chain buttonholes, now 5 chain buttonholes and do not touch 3 buttonholes, and knit in the 4th column without a crochet. You need to knit this way until the end of the row.

Related article: How long does it take for a self-leveling floor to dry?

3rd row: we cast on 5 air loops, of which we make 3 loops for lifting and 2 air loops, taking into account the pattern. Now we knit a single crochet into the middle loop of the arch of the previous row. Again 5 chain buttonholes and a single crochet in the middle loop of the subsequent arch of the previous row. Then we make a picot from 3 chain buttonholes, again knit 5 chain stitches and a single crochet into the middle buttonhole of the third arch* and do this until the end of the row. When we reach the end of the row, we knit 2 chain buttonholes and a double crochet into the end stitch of the row.

4th row: in the 3rd row at the very end, knit an air loop for lifting, and then turn the product in the other direction and knit a single crochet and a primary loop. Single crochet of the previous row, we knit 5 double crochets into the middle loop of the arch of the previous row, make a single crochet, then we knit 5 chain buttonholes and a single crochet into the middle loop of the subsequent arch, again we knit 5 double crochets into the single crochet of the previous row, column single crochet into the middle loop of the subsequent arch and repeat - that is, we do this from 5 chain buttonholes, a single crochet into the next loop of the previous arch, after 5 double crochets into a single crochet, a single crochet into the middle loop of the previous row*. We make the final single crochet in the 3rd chain loop of the arch of the previous row.

5th row: we knit 4 chain loops - 3 loops for lifting and 1 taking into account the pattern, now we knit a single crochet into the middle double crochet column of the previous row, we knit *3 chain stitches, now a single crochet into the middle loop of the subsequent arch, 3 chain crochets, a column single crochet in the middle double crochet of the previous row and repeat until the end of the row*.

Related article: Cross stitch pattern: "peacocks" free download

6th row: at the end of the 5th row you need to knit 3 air stitches for lifting and turn the knitting over, now we knit the row with a double crochet. And now we knit, repeating from 2 rows to 6, and so on for the entire product. After the scarf is knitted, you need to tie the edges.

Without cutting the thread, along the edge of the scarf - the width, we knit rows such as in the 2nd row, but without picot - we make a chain stitch for lifting and a single crochet stitch in the first loop, after 5 chain stitches, skip 3 and knit a single crochet stitch in 4, then again we knit 5 chain stitches, skip 3 and knit a single crochet in 4 and so on until the end of the row. And along the long part of the scarf you need to knit single crochets so that the edges have a shape.

Now we make the second row of binding - fringe. * We cast on 28 chain loops and insert the hook into the fifth loop from the hook, make a single crochet, then we cast on 20 chain loops and again a single crochet into the middle loop of the next arch and do this until the end *. The last chain should be made of 28 loops.

Now along the long edge of the product *knit 3 chain stitches, skip a loop and knit a single crochet* and so on until the end. We do it on both sides of the long edges.

Stripe pattern

You will need 230 g of Lana Grossa “BingoMelange” yarn 100% wool 80 m/50 g and a hook number 2.5. Product size: 144 -37 cm. Density: 1 repeat – 6 cm and 12 rows – 10 cm.

The scarf is knitted from the middle - we collect a chain of chain stitches according to the pattern, on this chain we knit arches on both sides of the chain - the central part of the rapport. We knit 8+4 loops, which make a connecting column in 8 loops, knit 4 more loops, again a connecting column in 8 loops.

The scarf is the most a simple accessory and at the same time quite functional, it can be used as a headdress, covering the head, as a cape or stole. There are many ways to crochet or knit a scarf to make the work beautiful, bright, and original. A scarf not only warms, but is also an important detail of an outfit; it can liven up a boring, plain coat or down jacket, voluminous female models serve as a fluffy collar that adds femininity and elegance.

Crocheting or knitting a scarf is not difficult even for beginner needlewomen; working on a simple model, be it a men's scarf or women's versions, does not require skills in knitting an openwork pattern. However, if you plan to link original accessory, you can always use ready-made diagrams with a detailed description.

How to crochet a scarf: an easy pattern for beginners

An easy-to-make scarf model, which is a long rectangular fabric, can be knitted by any needlewoman who has already mastered the principle of crocheting or knitting stitches and knitting stitches. For this work, half-woolen or woolen yarn of medium thickness is used and a hook is half a size thicker than indicated on the yarn label, since it is necessary to knit loosely, not tightly. If you are doing knitting work, it is also recommended to purchase a tool half a size larger. Knitting such a product for beginners is very simple:

• To work, we make a chain of an arbitrary number of links. You don’t have to count the loops; the length of the chain is equal to the length of the work (approximately 120 cm). If you plan to knit a snood, the chain can be connected, but it is important to straighten the chain first so that it does not twist;
• Then we make a lift with one loop and then one post at a time in all links of the chain. used yarn over;
• We form 1 ch. and turn the work around. We perform this row, inserting the instrument not under two arches, but only behind the back arch, 1 tbsp in each. b/n;
• We change the side of the work again and knit a row similar to the previous one. Due to the fact that the hook is inserted into the back bow, the knitting is embossed.

Winter women's scarves with a simple relief pattern you can create with knitting needles. To work, the number of loops must correspond to the width of the scarf; the product is knitted with a 1x1 elastic band. When knitting, you can choose the length of the work during the process; if you decide to crochet a scarf, the length is determined from the very beginning.

The drawing is very simple, so if you want to get original work, you can use skeins of melange yarn, knit in two threads, contrasting in color, or make the scarf striped. Using the method described above, you can create a snood. This pattern is also applicable for a hat.

How to crochet a scarf with an openwork pattern: a few more options

If you decide to create an openwork version of a scarf or hat with crochet or knitting, it is not necessary to study diagrams with a detailed description of complex patterns or create intricate motifs. A scarf with a simple openwork pattern looks no worse, and you can knit it without using a visual pattern with a detailed description, just remembering the sequence of elements in the pattern.

I scheme (openwork pattern)

The length of the initial chain corresponds to the width of the work, while the number of links for the openwork pattern should be divided by 8 plus one additional edge. For beginners, you can pre-knit a small sample of an openwork pattern:

• For an openwork pattern, we form a chain of 25 loops (8*3+1) from the selected yarn. To create the initial chain, it is recommended to take a hook half a size larger so that the edge of the work is not pulled together;
• We collect 4 additional ones, in the 7th from the instrument we form 1 tbsp. s/n. Next 1 vp, 1 tbsp. s/n, through one base, again 1 vp. and 1 tbsp. s/n through one link;
• 5 ch, change the side of the openwork pattern, skipping one top stitch, 1 st. b/n, then 3 v.p. 3 tbsp. s/n in the same top, knit 1 tbsp. b/n through one vertex. 5 ch, skipping the top to the next one - 1 st. b/n, 3 v.p., 3 tbsp. s/n., drop another one, in the next one - 1 tbsp. b/n, etc. Join in the 2nd stitch from the 1st stitch of the previous row;
• Again we make 5 ch, turn the knitting over, connect to the top of the third column with one stitch. b/n. 3 v.p. and in each link of the chain of 3 v.p. We knit the previous row one st. s/n and connect with one st. b/n for a chain of 5 v.p. We repeat this sequence until the row of openwork pattern is completed;
• We form all further rows by analogy in the manner described in the previous diagram;
• We complete the work in the following way: make 5 ch, adjoining the top of the third column with one st. b/n, 3 vp, under a chain of 5 vp, 3 vp, adjacent to the arms of the third column, etc. The rapport of the openwork pattern is ready.

Let's look at other patterns for crocheting a scarf and creating an openwork pattern for beginners.

II scheme (openwork shell pattern)

• For this openwork pattern we form a chain of 29 centuries. p. In the seventh from the hook we knit 1 tbsp. b/n, 4 vp, in the 4th initial chain we make 1 tbsp. b/n and repeat until completion;
• Then we make a loop, in the first arch 1 tbsp. b/n, in the 2nd - 7 tbsp. s/n. and in all odd arches 1 tbsp. b/n, in even numbers 7 tbsp. s/n;
• At the end of the line we make 4 ch, change the side of the work, and knit 1 st at the top of the second column of the previous one. s/n, 1 vp, a similar combination in the next 3 vertices, in the sixth - 1 st. s/n, connect to the second top of the next arch with one st. s/n and further duplicate;
• Again we make 4 vp, 1 tbsp. b/n in the first arch, 3 vp, 1 tbsp. b/n in the second, 3 v.p. etc;
• At this point the rapport is completed; to move on to the second rapport we knit 4 ch, 1 tbsp. b/n in the 2nd arch, 4 vp, leave one arch, after one 1 tbsp. b/n. At the end we knit 2 ch. and connect them into the final arch. Next, we duplicate the combinations described above according to the scheme.

III scheme (openwork mesh)

• The repeat of the openwork pattern is 10 loops, so the total number of chain links for the width of the scarf should be a multiple of 10. Having cast on the first row of the openwork scarf, make 1 ch, and 1 st in the second. b/n, 3 ch, in the fifth we make 1 tbsp. s/n, 2 v.p. and in the same loop 1 tbsp. s/n, 3 v.p. 1 tbsp. b/n, repeat until the row is completed;
• At the end of the line 5 ch, work on the other side, form 5 sts into an arch. s/n. Next 5 ch. and 1 tbsp. b/n. Duplicate until the row of openwork pattern is completed;
• We knit 4 ch, turn the work over, 1 tbsp. s/n, 2 vp, one st. b/n in the tops, dial 7 vp. and connect with the next bright one, also knitting 1 tbsp at each vertex. b/n. We complete the row with two v.p. and 1 tbsp. s/n;
• Next we make 4 vp, change the direction of work, 1 tbsp. s/n, 3 ch, at the 2nd, 3rd and 4th tops of the columns we knit 1 tbsp. b/n., 3 v.p., 1 tbsp. s/n in the 4th loop of a chain of seven, 2 vp, 1 tbsp. s/n in the same loop, 3 ch. (we repeat the second row of the pattern pattern), we knit 1 stitch at the 2nd, 3rd and 4th tops of the columns. b/n. At the end 3 vp, 1 tbsp. s/n, 2 vp, 1 tbsp. s/n;
• We turn the knitting over, knit 3 tbsp into the first arch. s/n, 5 vp, 1 st in the central top. b/n, 5 vp, in the next arch 5 tbsp. s/n. This row is knitted by analogy with the third, then we repeat the repeat of the openwork pattern.

Women's winter scarf models can also be knitted using an openwork pattern from wool yarn. It is recommended to knit the work wider so that it can be folded in half.

Similar patterns with descriptions are suitable not only for knitting a scarf or stole; openwork patterns for beginners can be used to create tops or cardigans, summer hat from cotton yarn.

Unusual ways to knit scarves

If you want to knit a modern, original accessory, you can use not only openwork patterns, but also non-standard equipment crochet from individual elements, which, like puzzles, are assembled into a single fabric. It is recommended to knit from yarn of different colors to make the work bright. Let's consider this option:

• To work, we form a chain (the number of links should be divided by 5 and add 7 to it). For a sample to understand the principle of knitting, you can cast on 37 loops;
• In the 4th from the hook, 5th, 6th and 7th loops we knit 1 tbsp. s/n., 5 ch, in the 6th and the next four we knit 1 tbsp. s/n, i.e. alternate 5 stitches and 5 vp. by skipping the same number of rings of the original chain, you should get a ribbon with holes;
• Next, we collect the same chain from yarn of a different color. We pass it through the holes in the first ribbon and begin to knit in exactly the same way as the previous one, having knitted the stitches, we cast on 5 chain stitches, while the original chain is behind the first ribbon, and the one just cast on in front is connected into the sixth loop with a st /n. We connect five air loops behind the first ribbon. The number of ribbons is comparable to the required width of the product and the choice of yarn.

• We cast on a chain of 40 air loops for the snood if you are knitting from very thick yarn with crochet number 10 or 80 if the yarn is of medium thickness. We connect the chain into a circle;
• We decorate the initial row with half-columns s/n. We make a connection and lift to the next one, then we knit a fluffy element (make a yarn over, insert a hook and thread the working thread, repeat two more times and knit all seven loops at once). Then we secure the element with one loop. In the same one we knit another similar element, then skipping 2 loops, in the 3rd again 2 lush stitches and so on until the end of the row;
• We connect the row under the arch between the first two cones, without tightening the thread so that the connection is invisible. Next, we knit two cones into each arch between the two of the previous row to make spikelets;
• Having knitted the snood to the required width, we finish the work, by analogy with how we started it.

Similar projects for beginners can be created with knitting needles using Chinese spikelet knitting patterns. In this case, we knit the product lengthwise with knitting needles on a fishing line. The pattern can also be used for a voluminous hat; we reduce it by the number of loops in the fluffy elements.

How to crochet a men's scarf?

A warm men's scarf can be made in the simplest way for beginners, which was described at the very beginning. Only for a men's scarf it is recommended to choose strict, brutal colors, for example, gray, blue, wine or burgundy. Models of a men's scarf with stripes look good, for example, a combination of yarn in light gray and asphalt colors. You can also choose melange yarn with a transition of several colors.

While women's models are usually long and are often worn over coats, draping outerwear, men's scarves are short in length and width and are worn inside.

The standard width of a men's scarf is approximately 16-18 cm, length - 90-110 cm. As a rule, openwork patterns with holes that resemble women's models are not used for a men's scarf.

Experienced craftswomen offer original ideas for beginners, how to crochet a men's scarf, relief patterns for creating a men's scarf, reminiscent of tweed or drape woolen fabric due to the presence of ribs. This model looks great and is suitable for men's wardrobe. This option is suitable for beginners, since its scheme is very simple:

• For work, we collect a chain of 90-110 cm (corresponds to the length of the product). We make 3 lifting stitches, in the 5th from the hook and all subsequent ones we knit 1 treble;
• Next, alternate knits and purls. embossed columns, initially we make 3 ch, yarn over, place the hook behind the column of the previous row in front for the front and in the back for the purl;
• Turning the work over, follow the pattern: purl. and persons elements. The number of rows can be increased by another 1-3;
• After the strip of relief elements, we knit with regular stitches, inserting the hook not into the tops of the previous row, but into the arms in front of the braid. Having turned the knitting over, we knit the same row again, inserting the hook into the arms under the main braid, consisting of the vertices of the previous row;
• We knit 3 more rows by analogy with the previous one, which is described above. The repeat of the openwork, relief pattern is completed, you can knit a couple more of these strips and complete the work with rows of front and back stitches. You can also change the number of rows of each strip depending on the thickness of the yarn.

A men's scarf with a relief pattern can also be knitted. For a men's scarf knitted, a pattern with diagonal stripes or rectangles in a checkerboard pattern is ideal. A similar pattern can also be used for knitting men's hats. The pattern is suitable for beginners, the diagram is as follows:

• To knit a men's scarf with knitting needles, the number of loops for the width of the product should be a multiple of four plus two edge stitches;
• The initial loop is removed and then the faces are alternated. and out. 4x4, at the end we knit one purl. Further along the terrain;
• In the 3rd row we make an offset to create diagonal stripes. Remove the first edge, purl the second, then knit 4, purl 4. and so we alternate until the row is completed. In the fifth we remove the first one, 2 p., 4 knits., 4 p. etc. In the seventh: purl 3, knit 4, purl 4, in the ninth: alternating purl 4, knit 4. We knit the entire product using this principle. At the end we close the loops with knitting needles traditional way or crochet.

Knitting a scarf for beginners is not difficult; it is the simplest product, the basis for knitting needlework.

The length of the scarf can be adjusted while knitting, so if you run out of yarn, you don’t have to buy another one.

In addition, when knitting, you can make a pattern with transverse stripes from yarn of different colors.

How to crochet a scarf for a boy and a girl

For a child, it is recommended to knit a set consisting of a hat and scarf, decorating the products decorative elements: for a boy, the faces of favorite animals knitted from yarn can be used; for a girl, flowers can be used, which are also easy to create for beginners.

Let's look at how to knit a set of a hat and scarf with flowers and leaves:

• For the scarf, we form a chain approximately 10 cm long, knitting 1 tbsp into the fifth link from the hook. s/n, omitting 2, in the 3rd we form 1 tbsp. b/n, omit 2, 1 tbsp. s/n, 3 vp, 1 tbsp. s/n and so on until completion;
• We turn the work, 4 ch, into the same 1 st. s/n. We knit 1 tbsp in all arches. b/n, and in the top 1 tbsp. s/n, 3 vp, 1 tbsp. s/n. Using a similar pattern, we knit to the selected length. You can use other patterns for crocheting and knitting a scarf described above for a children's product. The scarf can also be knitted. For beginners, creating a satin scarf using medium weight yarn without an openwork pattern using knitting needles may be an easier option;
• The edge of a children's scarf can be decorated with decorative elements, for example, arches made of yarn in an alternative color. The edges of the scarf are decorated with flowers and leaves, and a fringe of yarn. It is very easy to knit a flower: we form a circle of 5 stitches, then three ch, and then three more, knit 3 tbsp. s/n, then alternate 3 vp, 3 tbsp. s/n. In total we form 5 arches. We tie the arches with 1 tbsp. b/n, 1 half-st. double crochet, 5 tbsp. s/n, 1 half-st. s/n, 1 tbsp. b/n. On the Internet you will find other flower knitting patterns with descriptions;
• We start knitting a hat from wool blend yarn from the top of the head. We make a sliding loop and knit 16 stitches into it. s/n. We tighten the working thread. We form a circle for the top of the hat, first knit 2 tbsp. s/n, i.e. we make increases, in the next row we make increases through one, in the 3rd - through two, then a row with increases through three, etc. There should be a total of 6 rows (for a hat for a child under 2 years old) or 7 (for a hat for a child from 3 to 5 years old), it is recommended to make increments in increments so that you do not end up with a polygon instead of a circle. We knit the next rows without increments, forming the main part of the hat.

If you want to crochet a scarf for a boy, you don't have to choose dark colors, as for a men's scarf. An openwork pattern is also allowed. You can use the following scheme for creating an original set of a scarf and a “Lion Cub” hat:

• We knit the middle part of the scarf from yellow/orange yarn. We form a chain of 10 vp, in the sixth and four more we knit 1 st. s/n. Turn the work over, 5 vp, 5 tbsp. s/n;
• Next, take a beige/light brown working thread. We tie the middle part of the work according to the same pattern, connecting the strips using the side rings;
• We make lion faces as decoration for the work. We knit a circle from yellow/orange yarn (the same way as we knitted the top of the hat), the size of the circle should be smaller than the width of the scarf. We tie a fringe around the muzzle. We take 2 threads of beige/light brown color, approximately 10 cm long, fold them in half, insert the fold with a hook into the hole in the edging of the circle, draw the ends of the threads through the resulting loop, and tighten. For the eyes you can use appliqués or beads; the nose, mustache and mouth can be made from yarn;
• To knit a hat, you can use the previous pattern to complete the work or knit the product with knitting needles. The front part of the hat can be decorated with the face of a lion, and a pompom can also be attached to the top of the work.

Openwork scarf, 20 models with descriptions, knitting patterns and videos

Openwork scarf, 20 models with descriptions, knitting patterns and videos

never enough! This is due not only to the fact that the scarf needs to be matched to outerwear, handbag or gloves, but also because scarves come in many different shapes.

Types of knitted scarves What scarves come in shape, let's list them:

• simple rectangular scarf
• wide scarf - stole
• scarf - collar fastened with a button
• scarf - shirtfront
• trumpet scarf or snood
• scarf in the form of a bactus or scarf
• down scarf

Today we will talk only about the first two types of openwork scarves - straight rectangular, wide and narrow. The remaining scarves deserve an individual article. Which yarn to choose for a scarf Since we are talking about openwork scarves, the type of yarn depends on the purpose of the scarf and the pattern you choose. Let's say that you decide to knit a scarf as a decoration. Then choose the yarn that suits your color and do not pay much attention to its composition. The main thing is that the color scheme matches your accessories and clothes. If you want a scarf or stole to be not only beautiful, but also warm, then you should buy threads with wool, angora or acrylic. Yarn with cashmere is also great. In this case please note Special attention on the tactile properties of threads. Because the scarf will be in close contact with the neck, it should not irritate the skin. Take imported or Russian wool, but good quality. If the scarf makes your skin itch, then wearing it will be unpleasant. And it will be a pity for the wasted effort and time. Why you should choose an openwork pattern for a scarf The concept of a warm thing is most often associated with dense and thick knitting. But if you take thin wool threads and knit a light openwork product, it will be no less warm than a product made from thick yarn. Only airy, openwork things look more elegant and are much more pleasant to wear. For comparison, try knitting an openwork scarf and wearing it in cold weather. We hope you will be satisfied with the result.

Openwork scarves, products of our authors

Openwork scarves, stoles and shawls are the favorite models of our needlewomen. We present the most best schemes. Crochet openwork scarf - stole
The stole is crocheted. The yarn used was pekhorka crossbred brazilian wool blend, 500m per 100g, 3mm hook. In terms of consumption, I used exactly one skein. The yarn is tactilely soft and warm. You can vary the width and length of the scarf. An excellent accessory, bright, effective, soft and warm. This type of scarf is convenient for its variety of tying possibilities. different ways. Good luck! Light loops. Olga Mukhina. Openwork pattern for knitting a scarf
Scarf made of openwork ribbon lace
Tatiana's work. Scarf width 26 cm, length 178 cm. Crocheted No. 2 from Narcissus threads. First we knit the openwork ribbons. Then, during the knitting process, the openwork ribbons were tied to each other with a chain of air loops and single crochets. Crocheting from ribbon lace is not difficult in its technique even for beginners. Easy loops for everyone!))) Crochet openwork scarf, description: The scarf consists of separate ribbons that are connected to each other during the knitting process (the connection points are indicated in the diagram with arrows). First, tie the first ribbon according to the pattern. To do this, cast on 14 vp (8 vp base + 6 vp rise). 1st p.: 2 tbsp. s/n in the 7th century. p. chains from a hook, 3 in. p., 2 tbsp. s/n next c. p. chains from a hook, 7 in. p., 2 tbsp. s/n in the 5th century. p. chains from a hook, 3 in. p., 2 tbsp. s/n next c. n. chains from a hook. 2nd r. and then knit according to the pattern. Openwork pattern for knitting a scarf You can attach tassels to the narrow sides of the scarf:
Openwork scarf, work by NewNameNata I knitted an openwork scarf from cotton threads, it took about 50 grams. The diagram is from Asian magazines, I found it on the Internet. Knits up quite quickly. I urgently needed a scarf yellow color- contacted in a couple of evenings. Knitting pattern for an openwork scarf The pattern shows the calculation for 4 repeats, I got five of them. I cast on 52 chain stitches, then knitted according to the pattern. Crocheted No. 4.
Openwork hat and scarf for a girl. Hat and scarf for a girl. This is my boast. Knitted from p/w threads.
The scarf turned out funny, my daughter called it a centipede. Works by NewNameNata.
I knitted the scarf, as they say, knitted “by eye”, guided by the photo. Openwork scarf pattern:
Openwork scarf, work by Olga Mukhina
Scarf with a twist. Yes, yes, the highlight depends only on you and your imagination. A diagram from an oriental magazine (either China or Japan). Knitted from VITA “BRILLIANT” yarn. Composition: 45% wool (laster), 55% acrylic. Hook 1.25mm. The photo shows that the scarf is simple without decorations. But a little imagination, a little wooden beads and a little fur (just a little from an old mink collar). And voila, a chic, exclusive scarf. Knitted scarf pattern openwork pattern
Openwork scarf Azure (Irish lace) The scarf is made of mohair yarn in one ply, crochet number 1.25. Five types of individual motifs are made from yarn of three similar colors according to the given pattern. We start motives A, B, C, D with a chain of 6 air loops closed in a ring. For element E, it is better to use a sliding loop to completely close the hole. The completed elements can be combined directly into a product during the knitting process. Or first make the elements, arrange them in the chosen order, get creative, swap some... The length of the scarf is chosen as desired. A small scarf is used as decoration, a long one will decorate outerwear. Element E (ball), threaded through the holes between the elements, conveniently fixes the drapery of the scarf. Scarf knitting patterns
Openwork crochet scarf, Rita's work
The openwork scarf is crocheted No. 3, 5 from thin mohair. Size - 1m 50 cm. Scarf knitting pattern Red openwork scarf using Bruges lace technique
Red scarf with Bruges lace. I saw enough of the beauty and was inspired... Meanwhile, in addition to the gray stole, another scarf was knitted, I just wanted to make something the same, but brighter. I knitted it according to the same patterns as the stole, but with minor changes. I used microfiber yarn with lurex, it took about 4 skeins of 50 g each. Hook 1.15. The finished size of the scarf is 160x38 cm. Work by Elena.
Crochet scarf, openwork patterns

Crochet downy openwork scarf
The scarf is crocheted from Color City Norka Mink down yarn (48% mink down; 52% goat down). There are 350 meters in 50 grams. Clover hook 3. The yarn is wonderful and a pleasure to work with. The product required 5 skeins. Scarf dimensions - 40 cm/214 cm. The product is knitted in one direction in accordance with the diagram (attached). The scarf made from this yarn turned out to be very airy, light and warm. Work by Elena Shevchuk. Scarf knitting pattern
Openwork rainbow crochet scarf
Rainbow scarf. Material: several colors of yarn, I knitted it from leftovers. The work of Lyubov Volkova. Description of the openwork scarf Section 1: cast on a chain of air loops to the length of the finished scarf (multiples of 10+5+3 chain stitches for lifting). Knit 1 tbsp. s/n in the 4th loop from the hook, 1 tbsp. s/n in the next 3 loops, * 5 in/p, skip 5 loops of the chain, 1 tbsp. s/n in next 5 loops, repeat from * Finish work. The following sections: change the thread, cast on a chain of air loops to the length of the finished scarf in multiples of 10+5+3 in/p for lifting). Thread the resulting chain through the arches of the previous section. Knit: 1 tbsp in the 4th loop from the hook, 1 tbsp. s/n in the next 3 loops, * 5 in/p, skip 5 loops of the chain, 1 tbsp. s/n in next 5 loops, repeat from * Finish work. Continue knitting sections of different colors to the desired scarf width. Openwork scarf made of fans To knit an openwork scarf you will need: Catania yarn (50g/125 m, 100% cotton) 4 skeins; hook No. 3 or another suitable size. Scarf size: 106.5x23 cm. Knitting density: maximum width of the first fan motif is 19 cm, radius of the first fan is 10 cm. Scarf description: cast on 15 ch. and connect them into a ring. 1st row. 1 v.p. for lifting, connect 21 single crochets into a ring. Knit a total of 14 fan motifs further according to the pattern. Note:

Start knitting the second fan at point A with a chain of ch. and is attached with a connecting column to the first fan at point B.

Start knitting the third and subsequent fans at point B from the ch chain. and at point G the chain connects with the penultimate fan.

Further, during the knitting process, the fans are attached to each other accordingly. Points with connecting posts (see diagram).

Knit even fans according to the pattern of the fourth, and odd ones according to the pattern of the fifth fan.

Knitting pattern for an openwork scarf

Openwork scarves, models and patterns from the Internet

Several cute scarves with patterns from the Internet. Autumn openwork crochet scarf
Scarf with lace openwork pattern The pattern of this scarf is based on the motifs of real antique lace with elements of guipure knitting: flowers and leaves. The background is a traditional fine sirloin mesh. You will need 200 g of wool yarn (100 g/1600 m) light green and 200 g dark green; hook No. 2. Crochet scarf, openwork description Using a photocopier, enlarge pattern 49 to the indicated dimensions. Knit a braid of yarn in three layers 10 m long from dark yarn according to pattern 49. Baste it with sewing thread of a contrasting color to the pattern. In places where the stitches are rounded, make basting stitches from the outer edge to the inner. Sew the braid with a single thread at the points of contact, making stitches inside the braid. They should not be noticeable; the scarf is a double-sided product. Between the ribbons, embroider looped brids A according to Figure 49a using 2-ply thread. From bridle to bridle, pull the thread inside the braid. According to pattern 49a, knit a small circle, leaving a long thread. Baste the circle in places similar to B, and use a thread to embroider the bridles connecting it to the braid. In places B, perform the bridling with a twist, and the “spider” with a binding. Make flowers according to scheme 49b. You can vary the size by performing different numbers of C1H. Knit branches G according to pattern 49c. Knit twigs and shamrocks in the same way according to the size of the pattern. Baste the elements to the design and sew them in with a tail of knitting thread. Lastly, knit the scarf fabric according to pattern 49g, attaching it to the braid with connecting posts. Scheme knitted scarf
Openwork scarf with pineapples I came across an interesting scarf on the Internet, I really liked it. Without waiting for autumn, I decided to make my dream come true. Here's what I got. Scarf and flower pattern: Openwork crochet scarf
Crochet scarf

Scarves are not only an element of clothing that helps to keep warm during the cold season. It is also a stylish accessory. They are made in different techniques using a variety of materials. For this reason, more than one pattern is created for each craftswoman who always wants to stand out from the rest with the originality of her product.

A few words about materials and hooks

Every craftswoman knows how impossible it is to repeat a product based on its description. An exact copy will never be possible, because there are some points that significantly affect the size of the product, especially if the work is done with crochet.

Before you start looking at crochet patterns with diagrams, you need to say a few words about hooks. Each manufacturer actually has different sizes. For example, #5 one will have 5 mm, while the other will only have 4 mm. And this is already reflected in the future product.

The thickness of threads of different brands is also different. At first glance, this is an insignificant factor, but it is noticeably reflected in the finished scarf or cardigan. And needlewomen use crochet differently, tightening the threads stronger and weaker. This changes the density of the canvas and its size.

So it turns out in the end that the crochet patterns for scarves, the patterns of which we will consider, have conventional size indicators. To get a truly beautiful and unique product, you need to use all your imagination and your own vision of the finished scarf.

Simple and hassle-free

Let's start from the very beginning simple product, for which the crochet scarf pattern is described literally in two or three words: double crochet. Indeed, the easiest way to make a scarf is this basic element. Work begins with a chain of air loops, the length of which is equal to the width of the scarf. Next, each row is knitted until the desired length is reached.

There are several variations of this pattern. Firstly, you can do not one, but two or three yarn overs. In this case, knitting will go faster, and the fabric will not be so dense. Secondly, the edges of the product may not seem quite neat. To do this, it is better to tie the scarf with a single crochet.

Thirdly, such a slightly boring model can be enlivened with the help of melange thread, interesting appliqué or openwork edges knitted at the ends of the product. It turns out that any crochet patterns for beginners turn well into a simple but quite original scarf.

Variation on the theme of double crochets

In search of an idea for any product, we look through a wide variety of crochet patterns, diagrams and descriptions for them. It often happens that it is quite difficult to implement the found options. Therefore, the next version is suitable for every craftswoman who knows how to make at least double crochets.

The pattern consists of alternating two types of groups of columns. In one row we knit them 2 at a time with a chain of chain stitches between them, and in the next row we knit them 4 at a time and do not knit any chains of chain stitches.

Crochet patterns like these are quite easy for beginners. At the same time, they look original and create a canvas with a little openwork. To make the product look as much like a scarf as possible, its edges must be tied in a circle with single crochets, and at the ends you need to make long tassels or hang airy pom-poms created from the remnants of yarn spent on the scarf.

Beautiful crochet scarf pattern

Scarves are used not only as insulation in cold weather, but also as a stylish accessory. For these purposes, it is best to choose thin yarn for the scarf. Under such conditions, the accessory will not seem heavy and too noticeable in any outfit.

IN this pattern air loops, double crochets and single crochets are used. In the first row we knit 5 single crochets and a chain of 2 air loops between them. In the second row, we reduce the number of single crochets to 3, and under the arches of the single crochet we knit 2 double crochets with 1 single crochet on both sides of them.

In the third row, the single crochets are reduced to 1, but we make 5 double crochets each. This will be the vertical report of the pattern.

Next we knit according to the same pattern, but the pattern will be in a checkerboard pattern. We continue to work until the product reaches the length we need. We pay special attention to the transition points from row to row so that the edges are neat.

Wide fans

There are different crochet scarf patterns. We have discussed the diagrams of several simple options above. Now let's look at another exceptional option.

It is built on the same double crochets, which together form large fans, and not as in the previous versions. The pattern report is designed for 3 rows. In each of them, a certain number of single crochets are added, due to which the fans in the pattern “open up”.

To ensure that the product does not shrink and the canvas maintains the same width, the pattern uses air loops, the number of which in each row varies, depending on how much a large number of double crochets in this particular row.

The pattern is obtained due to which there are no large gaps and unnecessary holes, which are not at all appropriate in this particular product. This pattern is best made from thin but warm yarn, such as mohair or tiftik, but do not forget to add a thin synthetic thread so that the product holds its shape.

Sirloin scarf

The crochet patterns with diagrams proposed above had a checkerboard construction order, but the next one has a clear geometry. It is based on loin knitting, but with a slight complication, resulting in a beautiful openwork diamond pattern.

For one report we need 9 cells fillet knitting. Already in the second row in the fifth of them we knit a fan of 3 double crochets. In the third row, on both sides of the fan, we knit 2 more of the same elements. We rise like this 4 rows in a row. In the intervals between the fans we make chains of air loops: first 3, then 7, and then 9.

Starting to narrow the rhombus, we connect all the free chains from the same crochet with a single crochet, in the next row we knit another single crochet here and close the rhombus.

These are the simplest crochet patterns. Many people, even novice craftswomen, know the patterns and their descriptions.

Cross knit

Before this, each crochet scarf pattern was made in length. But you can knit products in width. This is especially true for openwork products.

The pattern for such a scarf is selected to be as airy as possible. The first chain of air loops is selected in accordance with the desired length of the future product. The result is not very many rows, but they are all quite long.

The pattern shown in the photo is built on the basis of the same double crochets. As an option, wide fans can be used. They look a little like this pattern. Here it is proposed to make an alternation of dense and openwork fans formed from double crochets and air loops.