Knitting a scarf for a child is quite quick and very interesting: you can use bright materials, unusual patterns, or some completely unimaginable and original children's patterns.

The easiest way to do the work is with knitting needles, since this tool allows you to create a soft elastic fabric from threads of almost any thickness. They are easy to knit scarves for children of any age, practical or decorative, for girls or boys.

If you don’t have free time or if you need to get a classic children’s scarf, you can use an extremely simple knitting pattern, accessible to knitters with any knitting experience. Knitting scarves different types rubber bands cannot be called very original idea

• , however, these particular patterns have many of the qualities necessary for such children's accessories:
• elasticity and softness of the scarf;
• the pattern is the same on both sides;
• easily combined with children's hats and mittens in matching colors;

versatility (for boys and girls). Traditionally, a scarf is knitted with knitting needles for a baby, casting on an even number of stitches (P) and alternating knit stitches (LCP) and purl stitches (IPP) in a certain order. The picture below shows the process of making a baby gray scarf

elastic band 1:1.

• Everything is as simple as that here:
• 1 chrome, 1LCP, 1 IZP, 1 chrome;

1 chrome, 1 IZP, 1 LCP, 1 chrome.

Colors can be distributed as the craftswoman wants. Narrow multi-colored stripes look good on children's scarves, but you can make the product from long spans or even make two halves of the product with different threads. Yarn in grey, blue or other soothing colors is usually chosen for a boy's scarf.

Video: Knitting a scarf for a boy

Curly elastic band and its features The next model is similar to a scarf, knitted

The figure below shows a knitting pattern for such an elastic band. It is quite simple, but requires the attention and concentration of the knitter. In the example, 15 P are used, but for knitting a children's product you may need more. Make a small test sample, measure it, calculate how many P's there are in 10 cm and then start making a scarf with the correct number of P's.

Like many elastic bands, this pattern consists of just two rows, the repetition of which allows you to create a scarf of the right length for a child of any age. As for yarn, hand knitting for children warm scarves requires the use of only high-quality materials. This is especially true when it comes to accessories for a baby with sensitive skin. Shaggy, fluffy, hard, “prickly” and artificial threads are completely unsuitable.

Gathered scarf

A good alternative to elastic scarves is to use some other pattern that gives the product elasticity. To make such a children's product with knitting needles, prepare a fairly thin thread and two sets of tools: some thin, others thicker. The difference in spoke numbers should be at least three positions, for example, No. 2 and No. 5.

There is no need for a diagram, since the description is sufficient:

• dial required amount P in any convenient way;
• knitting needles No. 2: knit four rows according to the principle of garter stitch (knit and purl rows);
• knitting needles No. 5: knit 12 rows in stockinette stitch (in even rows, all P knit, in odd rows, purl). At the same time, in the first of them, double the number of all P, except for the edge ones. This means that from each P, knit two;
• knitting needles No. 2: perform 4 rows of panels. viscous. In this case, in the first of them, reduce the number of P by half, that is, go to the original number of P.

To further knit a scarf, alternate performing step No. 3 and step No. 4. Having received a fragment of the desired length, knit the last section with garter stitch and close all stitches.

Original scarf-loop

Such an accessory for a baby or child will be not only functional, but decorative. The scheme of its features is that this children's knitted scarf no need to tie: one end is threaded into a loop and securely fixes the product.

2167

Before you start knitting a scarf for a child, you need to understand how to choose the right materials and tools.

All children's scarves are mainly used to warm the baby during the cold season, which means the thread from which the scarf will be knitted must be quite voluminous and warm. But do not forget that the child’s skin is very delicate, and the thread needs to be soft, non-prickly and hypoallergenic.

It is good that the composition of such yarn does not exceed 40–50% wool; if possible, acrylic and bamboo are present. The length of the thread in a skein can be no more than 350 m per 100 g. Knitting needles on which to knit children's scarf, must be chosen depending on the volume of yarn: knitting needles must be taken 2 times thicker than the thread. So, for example, for yarn with a length of 350 m, the recommended needle size is 2.5 - 4.

But, if the knitting is too tight, you need to take knitting needles bigger size, and vice versa, if the knitting is too loose, the knitting needles will be smaller.

Typically, the required knitting needle size is indicated on the yarn package. The size of the scarf will depend on the age and height of the child for whom the product will be knitted. To determine the number of loops that will need to be cast on for the required size, it is advisable to knit a scarf sample measuring approximately 10x10 cm.

How to knit a simple classic scarf: step-by-step instructions

Few beginning craftsmen know how to knit a scarf for a child. There are two simplest classic version, which everyone can do, even beginner knitters: garter stitch and English elastic. Both patterns allow you to get a double-sided fabric, that is, the front and back sides of the children's scarf will look the same.

Garter stitch involves knitting in turning rows with knit stitches, in the round: odd rows are knit, even rows are purl. To prevent the fabric from stretching while working in turning rows, the first loop is always removed unknitted, the last one is knitted purl-wise. A scarf knitted with this pattern will be quite voluminous, but not very soft.

You can diversify the product with bright multi-colored yarn.

The technique of knitting with an English elastic band should be used after having already mastered the basics of knitting on knitting needles because when making such an elastic band, knit and purl loops will be used. The scarf will be both voluminous and very soft.

Step-by-step instruction:

• On the knitting needles you need to cast on a number of stitches that is a multiple of 3 plus 2 edge stitches.
• The first loop is removed, the last one is knitted.
• In the 1st row, the loop that goes behind the edge is tied with the front one, a yarn over is made, the next one is removed. This repetition must be performed until the end of the row.
• In the 2nd row: the first one is removed, then the loop is knitted together with the knit yarn over, the next loop is removed unknitted. Alternation must be performed until the end of the row.
• Perform this repetition of the first and second row until the required length of the scarf is reached. Upon completion of knitting, close the loops, cut the thread and hide the remaining tip with a crochet hook.

Original scarf-loop for a boy

Many mothers are interested in how to knit a scarf for their beloved child so that it is warm and easy to use. An option such as a loop scarf, which will fit tightly around the boy’s neck, will not come undone and will warm him in cold weather, will help solve these problems. For such a scarf you need a skein of bulky warm yarn (wool no more than 40%), number 4 knitting needles and a knitting pin.

Step-by-step instruction:

1. You need to cast on an even number of stitches on the knitting needles, which is a multiple of 4, in accordance with the selected scarf width. Knitting is done with a 2×2 rib, the first stitch is always removed, the last one is always knitted purlwise.
2. In the 1st and all subsequent rows, starting from the second loop, alternate 2 knit and 2 purl stitches until the end of the row. Knit to a height of 10-15 cm.
3. Next, the product needs to be divided into 2 equal parts to make a loop: it is recommended to transfer the first half of the loops onto a knitting needle, and the second half onto a pin. Knit the first part of the loops placed on the knitting needle. Continue knitting with 2×2 rib. Having knitted to a height equal to the width of the scarf minus 2 cm, slip the loops from the pin onto a free knitting needle, and the loops from the knitting needle onto a pin. Using the free second tip of the thread in the skein, knit the second half of the loops to a height equal to the number of knitted rows on the first half of the scarf, cut the thread
4. Remove all the loops onto one free knitting needle in such a way that first the loops are thrown from the pin, and then the loops from the second knitting needle. Continue knitting for the required length of the scarf, which will be equal to the circumference of the child’s neck, plus a few cm for the volume of outerwear, plus a length equal to the length of the already knitted part.
5. Close the loops, cut the thread, hide the end. You can decorate the scarf with pompoms or tassels.

Collar scarf in the shape of a bow for girls

A bow-shaped collar scarf for a girl is a more complicated version of a loop scarf.

To knit such a scarf for a child you will need:

• a description of how to knit a scarf;
• a skein of warm and voluminous yarn, which contains 40% wool, 40% acrylic and 20% bamboo, thread length 350 m;
• a set of two straight knitting needles No. 3 and a set of 2 straight knitting needles No. 2;
• large knitting pin.

The length of the scarf will be equal to the circumference of the child’s neck + 5-7 cm for the thickness of the clothing if the scarf is worn over it. The scarf will be made using the garter stitch technique, the loops are knitted on the front wall, the yarn overs are knitted on the back wall.

Step-by-step instruction:

1. Cast on 4 stitches on needles No. 3.
2. In the 1st row, the 1st stitch is removed, a yarn over is made, the next 2 stitches are knitted, a yarn over is made and the last stitch is knitted purlwise.
3. In the 2nd row, the first loop is removed again, the second (yarn over) is knitted, the next 2 are knitted, then the yarn over is knitted with a knit stitch and the last one is knitted with a purl stitch.
4. Then you need to make an increase in each odd row in the same way as the first row: yarn over after and before the edge loop. Increase to the desired width of the ball.
5. Each subsequent purl row is knitted similarly to the second row, no increase is performed.
6. Then you need to do garter stitch without changes to a height of 7–10 cm.
7. Next, proceed to the formation of the loop itself. It is recommended to knit it on needles No. 2 to make it more elastic. To make a loop, you will need to take knitting needle No. 2 and a pin and remove the loops on them one by one from knitting needle No. 3 (the first loop is removed onto the knitting needle), thus dividing them into two equal parts.
8. Knit the first part of the loops from the needle in garter stitch to a height of 5 cm. Then slip the loops from the pin onto the second needle No. 2, and transfer the knitted loops from the first needle No. 2 onto the pin. Knit the loops removed from the pin to a height of 5 cm, using the second end of the thread in the skein for work. When the required height is reached, cut the thread. Alternately removing the loops from knitting needle No. 2 and from the pin, transfer them all to knitting needle No. 3. Knit in garter stitch on needles No. 3 to the required length of the scarf.
9. Proceed to knitting the second loop in the same way as the recommendations described above, that is, dividing the fabric into two equal parts, alternately removing the loops on a No. 2 knitting needle and a pin. Also make the second loop to a height of 5 cm. Next, connect the fabric together.
10. Work in garter stitch to a height of 7–10 cm (the number of rows is equal to the number knitted in step 6).
11. Next comes the decrease in stitches. In each front row, every 2 and 3 stitches are knitted into one from the beginning and from the end of the row. The purl row is knitted without decreasing with knit stitches.
12. Finish knitting as soon as there are 4 loops on the knitting needle. Cut the thread and hide the loose ends.

Universal scarf

Before you start making such a scarf for your baby, it is recommended to decide on its size and color. The size of the scarf will depend entirely on the wishes of the craftswoman. To create it you will need 2 skeins of yarn of different colors, containing 40% wool, 20% bamboo and 40% acrylic, thread length 350 m per 100 g), knitting needles No. 3.

The easiest way to knit a scarf for a child is to use garter stitch (all stitches are knitted).

Step-by-step instruction:

1. Before starting work, it is recommended to make a small test sample, wash and dry it, so as not to bandage it in the future. ready product.
2. It is recommended to cast on 3 stitches on the knitting needles, knit in turning rows with the front stitches, with the exception of the edge stitches: the first is always removed, the last is done purl.
3. The increase in loops will be carried out in each 4th row, 1 loop before the last edge loop: the first 3 rows are knitted without changes, in the fourth row 2 knit loops are knitted into the third loop - one after back wall, the other for the front. Next, the next 3 rows are knitted without increasing; in the eighth row, 2 knit stitches are again knitted into the penultimate loop - behind the back and behind the front wall of the loop of the previous row.
4. The increase is carried out until the desired width of the scarf is reached. After completing the last decrease, you must also knit 3 rows, in the second, switch to a thread of a different color. Next comes a decrease.
5. The first loop in the row is removed, then the remaining loops are knitted except for the penultimate 2 loops. They are knitted in one knit stitch behind the front wall, then an edge purl stitch.
6. Repeat decreasing every fourth row until there are 3 stitches on the needle. Finish knitting, cut the thread, hide the end of the thread.

The scarf is ready. It can be additionally decorated with multi-colored pompoms or tassels.

Checkered scarf

A scarf with a checkerboard pattern is knitted very simply, and it turns out to be double-sided, that is, both the front and back sides look the same.

To create such a scarf you need:

Step-by-step instruction:

1. Cast on 30 stitches + 4 edge stitches on the knitting needles. Knit in turning rows.
2. Edge stitches: the first is removed, the second is always the front one behind the front wall, the penultimate one is removed, with the thread passing before work, the last one is the back side behind the front wall.
3. Main drawing:

• 1st row - alternating 6 knits behind the front wall, 6 purls behind the back until the end of the row.
• 2nd, 4th, 6th row: 6 loops are made purl behind the front wall, 6 - knitted behind the back to the end of the row.
• In the 3rd and 5th row: alternate 6 knits behind the back wall, 6 purls behind the front until the end of the row.
• 7th row: it is necessary to change the arrangement of the squares, that is, over the front loops, purl ones are knitted behind the back wall, over the purl ones, knit ones are knitted behind the front wall.
• Next, knit five more rows over the knit stitches behind the back wall, over the purl rows - purl over the front wall.
• 13th row - change the squares again. Knit to the required length of the scarf. Close the loops

1. If desired, the scarf can be decorated with tassels:

• Wrap the thread from which the scarf was knitted 33 times around the narrow side of the cardboard. Cut the threads on the cardboard in half, so that the result is 33 threads 20 cm long.
• Take your hook and thread it through the first cast-on loop. Fold the thread in half and pull out a small loop with a crochet hook. Pull the remaining tip of the thread into the resulting loop. The brush is ready. Repeat for the remaining 32 stitches. Using a hook, pull the tip of the thread that remains during the knitting process into the edge loop and fasten. This will make 34 tassels.
• Make tassels for the other edge of the scarf in the same way.

Scarf with voluminous braids

For beginning craftswomen who want to knit a scarf for their child, a scarf with voluminous braids is an option for how to very quickly knit an interesting, warm and uncomplicated version of a children's scarf.

In order to knit such a scarf, you will need a skein of bright yarn, which includes wool, preferably soft and non-prickly (the length of the thread in a skein is 350 m), straight needles No. 3 and a knitting pin, which will be needed to form braids.

Step-by-step instruction:

1. The scarf with braids is knitted in turning rows. You will need to cast on 39 stitches on the knitting needles.
2. First row: the first loop is removed, it is not knitted, then 12 knit stitches are made behind the back wall, then a pearl pattern follows, that is, for 13 loops, 1 purl and 1 knit stitch alternate, the row ends with twelve knit stitches and 1 purl - edge loop .
3. The second row and all the following even rows: the first loop is removed, 12 purl loops are knitted, then a pearl pattern of 13 loops - alternating purl and knit stitches (start alternating in the same way as in the first row, from the purl loop), then 13 purl stitches, including the last edge. The series is completed.
4. In the third row, the formation of the braid begins: the first loop is removed, 4 knit stitches are knitted, the next 4 loops are re-pinned before knitting, another 4 knit stitches are knitted, then the loops from the pin are returned to the knitting needle and also knitted. Then comes the pearl pattern on 13 loops and another braid is formed: just like at the beginning of the row, 4 knit stitches are knitted, the next 4 are re-knitted onto a pin in front of the knitting, the remaining 5 loops are knitted, including the edge one, with knit stitches, the loops are returned to the knitting needle with pins and knit - 3 knit stitches, and 1 last stitch is knitted.
5. The fourth and sixth rows are knitted similarly to the second; the fifth is similar to the first.
6. In the seventh row, 5 stitches are transferred to the pin at work, the next 4 are made with knit stitches, then the loops from the pin are also knitted with knit stitches, another 4 knit stitches are knitted, followed by a pearl pattern of 13 stitches. Next, 4 loops are removed onto a pin, the next 4 are knitted, the next 4 loops are knitted from the pin, and the last 4 loops are knitted with knits and 1 edge loop is knitted with a purl. The series is completed.
7. The eighth row is performed similarly to the second. Next, the repeat, consisting of the first eight rows, is repeated to the desired height.
8. When the length of the work reaches the desired height, it is necessary to close the loops, cut the thread, and hide the end. The scarf can be decorated with tassels.

Gathered scarf

In the process of knitting such a scarf, you will need 1 skein of bright, warm, voluminous and non-sharp yarn (length of thread in a skein is 350 m, composition: 40% wool, 40% acrylic and 20% bamboo), 2 sets of knitting needles: No. 2 and No. 5.

Step-by-step instruction:

1. On needles No. 2, cast on 22 stitches, including 2 edge stitches.
2. From the 1st to the 4th row inclusive, knit in garter stitch (knit and purl rows are knitted exclusively with knit stitches behind the front wall).
3. In the 5th row, switch to needles No. 5. The first loop is knitted behind the front wall. In the remaining loops, except for the last edge loop, 2 facial loops are knitted: the first behind the front wall, the second behind the back, thus, the number of loops increases almost 2 times, there are 42 loops. The last stitch is also knitted behind the front wall.
4. From the 6th to the 12th row inclusive, knit in stockinette stitch on needles No. 5, that is, purl rows are made with purl stitches, and knit stitches with knit stitches.
5. In the 13th row, you need to switch to needles No. 2 and reduce the number of loops to the original: the first loop is a knit stitch, then every 2 loops are knitted into one knit behind the back wall, the last one is a knit stitch.
6. From the 14th to the 18th row inclusive, work in garter stitch.
7. Repeat the repeat from the 5th to the 18th row until the required length of the scarf. Then finish knitting - close the loops.

Warm snood collar

A seamless warm snood collar with a rice pattern is the simplest example of how you can quickly and beautifully knit a warm and cozy scarf for the winter for your child. To create it you will need a skein of yarn 240 m long, 100 g (50% wool and 50% acrylic), circular knitting needles No. 3, and a knitting marker.

To determine the required size, you need to measure the volume of the child’s head: along the bottom of the chin, going around the face along the line of the crown.

Before starting work, knit a sample measuring 10x10 cm, wash, dry, calculate and cast on the needles the required number of loops, which will be a multiple of 2 and 1 additional loop to close the knitting in a circle. Knitting in a ring. Place a marker between the beginning and end of the row.

Step-by-step instruction:

• 1st row: alternate until the end of the row: 1 knit stitch, 1 purl stitch. The row begins with a knit stitch and ends with a purl stitch.
• The 2nd row is knitted similarly to the first.
• 3rd row: alternating 1 purl and 1 knit. The row starts with a purl stitch and ends with a knit stitch.
• The 4th row is performed similarly to the third.

Repeat from the 1st to the 4th row to the required snood height. Close the loops and hide the thread.

Scarf-hood

In order to knit a scarf-hood for a child aged 7 - 9 years, you will need 3 skeins of warm bulky yarn 100 m/100 g, containing 25% wool, circular knitting needles No. 5, a sewing needle, a marker for the beginning of a row, a hook No. 5 ,5.

Step-by-step instruction:

1. Cast on 80 stitches on the knitting needles and one extra stitch to join the knitting in a circle.
2. Knitting begins with a pearl pattern: alternate knit and purl stitches at the end of the row. The loops are knitted behind the front wall. At the end of the row, so as not to get confused later when knitting, hang a special marker.
3. In the second row, the alternation of stitches changes: the purl stitch is knitted above the front stitch of the previous row, and the knit stitch is knitted above the purl stitch.
4. From the 3rd to the 6th row inclusive, the 1st and 2nd rows are repeated.
5. From the 7th to the 22nd row, knit stitch is knitted (all stitches are knit stitches only).
6. 23rd row: the first 37 loops are knitted behind the front wall, then 6 loops must be closed - for this, loops 38 and 39 are knitted, then the 38th loop is removed from the knitting needle through the knitted 39; the 40th loop is knitted, removed from the needle 39, and so on up to the 43rd loop inclusive. The next 37 stitches to the end of the row are knitted.
7. From the 24th row, the transition to knitting in turning rows is made. It is necessary to knit a row to the closed loops, the last loop before the closed one is knitted purl-wise behind the front wall, the knitting is turned.
8. 25th row: the first loop is removed unknitted, then all loops to the end of the row (until the next closed loop) are knitted purl over the front wall.
9. In the 26th row, decrease two stitches: knit the first and last 2nd and 3rd stitches into one.
10. Next, continue to knit in stockinette stitch (that is, the front rows are knitted with facial stitches, the purl rows are knitted with purl stitches, the first edge stitches are always removed, the last ones are knitted with purl stitches) until the required height of the hood.
11. Once the required height of the product is reached, sew the two halves of the hood with a knitted seam.
12. Proceed to knitting the lapel. To do this, cast on the front loops, starting from the first closed loop in the 23rd row, around the entire circumference of the resulting hood; their number should be odd in order to close the product into a circle. Knit all the cast-on loops with a pearl pattern, repeating the steps from the 1st to 2nd row of the beginning of knitting, to a height of 12 rows. Then sew on the resulting lapel, that is, sew the 1st and 12th rows of the lapel together using a knitted seam.
13. Start knitting ears. To do this, crochet 6 single crochets into the amigurumi ring. In the second row, increase by 1 single crochet in each column of the previous row, that is, you will end up with 12 stitches. In the 3rd row, increase every second stitch, resulting in 18 single crochets. In the 4th row - an increase is made in every third column, resulting in 24 columns. The 5th, 6th and 7th rows are performed without additions. The first eye is ready, cut the thread, leaving a long tip for later sewing it to the hood. Knit the second ears in the same way. Fold each ear in half and sew to the hood.

Reversible scarf with pompoms

A reversible scarf is a scarf that looks equally good on both the front and back sides. In order to knit a universal double-sided scarf for a child, you will need 3 skeins of thread of 50 g (130 m), 25% wool, knitting needles No. 2, 1 additional knitting needle for forming a braid, crochet hook No. 3. Abbreviations: l.p. – front loop, from p. - purl loop.

Step-by-step instruction:

1. Cast on 40 stitches + 2 edge stitches on the knitting needles. Knit stitches are knitted on the back wall, purl stitches on the front wall. The scarf is knitted in turning rows. The first loop is always removed unknitted, the last one is purled.
2. Main drawing:

• in the 1st, the first edge is knitted (braid element: (2 p., 2 p.) × 2 times; elastic - 1x1 - 8 times) - do it twice. Complete the row 2 (2 l.p., 2 i.p.) × 2 times and the last edge.
• The 2nd – 4th row is performed similarly to the 1st.
• in the 5th row, start forming a braid: edge loop, (using an additional knitting needle, re-knit loops 5 to 8 inclusive on the front and knit them first 2 l.p., 2 i.p..; then repeat another 2 l. .p., 2 sts, perform an elastic band of 8 loops 1 lp, 1 st) – repeat 2 times. Complete the row by forming another 1st braid: slip the penultimate 4 loops on the knitting needle onto the front knitting stitch, perform them first: 2 knitting stitches. 2 stitches, perform the remaining loops 2 stitches, 2 stitches and an edge stitch.
• Knit the 6th – 8th row in the same way as the 1st.
• Repeat for the required length of the scarf from rows 1 to 8. Close the loops.

For a pompom with a diameter of 5 cm, cut out 2 round blanks from cardboard: outer diameter 3 cm, inner 1 cm. Make a slot between them. Place them together, laying a thread between the pieces. Wind a thread around this workpiece through the slot so that the internal diameter decreases by approximately 2 times.

Cut the wound thread along the outer diameter, while tightening the thread laid between the workpieces. Remove the blanks. Trim the uneven edges of the pompoms. Make 2 more pompoms. Tie the resulting pompoms to the scarf in places where 9 single crochets are knitted. Similarly, decorate the other edge of the scarf.

Original cat scarf

To create such an original scarf for a child, you will need 2 skeins of different yarn. bright color 500 g/100 m, knitting needles No. 2, hook No. 3, sewing needle with a big ear. Abbreviations: sbn. - single crochet.

Step-by-step instruction:

1. The scarf is knitted in stockinette stitch, that is, the front side is worked with knit stitches, and the back side with purl, turning rows.
2. Cast on 40 stitches on the knitting needles, including 2 edge stitches, the first of which is removed, the last one is always done purl-wise. Knit a scarf to the required length, periodically changing threads of different colors, thus making the future scarf striped. Close the loops
3. For the paws, cast on 28 stitches and knit to a height of 48 rows. To bevel the foot, decrease the stitches. To do this, in the 49th front row, knit the 1st and 2nd, 13th and 14th, 15th and 16th loops in one loop, knit the last two loops also in one, but purl loop. The 50th purl row is knitted unchanged. In the 51st row, decrease again: knit the 1st and 2nd, 11th and 12th, 13th and 14th in one loop, and purl the last two. Row 52 – no changes. In the 54th - close the loops. Sew the foot along the long side. Using this pattern, knit all 4 legs.
4. For the tail, cast on 14 stitches and knit them to a height of 58 rows. Decrease the stitches, forming a tail bevel. In the 59th row, knit the 1st and 2nd, 6th and 7th, and the last two loops in 1 loop. Complete the 60th row without changes. In the 61st row, knit the 1st and 2nd, 5th and 6th, and the last two loops in one. In the 62nd row there is no decrease. In the 63rd row, cast off the remaining 8 stitches.
5. For the cat's head, cast on 24 stitches. Work the first 2 rows in stockinette stitch. In the next 3rd, 5th, 7th, 9th, 11th and 13th rows, increase stitches in every 2nd loop at the beginning and at the end of the row: knit two loops from one of the previous row. Next, without changes, perform from the 14th to the 34th row inclusive. From the 35th row and further in the 37th, 39th, 41st, 43rd and 45th rows, make decreases: knit every second and third loop in one loop from the beginning and from the end of the row. Knit the second part from threads of a different color in the same way as the first.
6. For the muzzle, cast on 20 stitches on the needles. For bevel in the 3rd, 5th and 7th row, add one stitch to every 2nd stitch from each end of the row. In the 15th, 17th and 19th rows, decrease by knitting 1 loop every second and third from each end of the product. In the 23rd, 25th and 27th rows, increase loops in every second loop on both edges of the fabric; in the 35th, 37th and 39th rows, decrease these loops. In the 41st row, close the knitting. Fold the piece in half and sew along the edge.
7. The ear consists of two triangles of different colors, but the same size. For one eyelet piece, cast on 16 stitches on knitting needles. Knit them in every odd row, starting with the third decrease in stitches, knitting together every first and second stitch from the beginning and end of the row. Until there is 1 loop left on the needle. Finish knitting. Knit two parts of one color and 2 of another. Place two pieces of different colors together and crochet their edges with single crochets. The ears are ready.
8. You can buy ready-made eyes and knit them according to the following pattern. Each eye consists of 3 parts.

• The first part is made of white threads: cast on 12 loops, starting from the 3rd row, knit every 1st and 2nd loop together. In the 11th row close the loops.
• The second part is made of blue or green threads. Crochet. 6 sc. dial amigurumi into the ring. 1st row: knit 2 sc in each stitch. 2nd row increase in every second sc. The result will be 18 sc. Finish knitting.
• Third part: dial 6 sc into the amigurumi ring. In the first row, increase each stitch by knitting 2 sc. Finish knitting.
• Sew all the parts together. Repeat the steps for the second eye.

1. For the nose, also knit 6 sc. into an amigurumi ring. Increase on each sc. In the third row, decrease: sc, decrease to the end of the row. The remaining 6 sc. pull off.
2. Sew all the details. Lightly fill your head with padding polyester.

When making such an unusual knitted scarf for a child as a cat scarf, the cat’s head can be “combed” with a slicker brush so that its head fluffs up.

Video: knitting a scarf with a description, patterns for a child

Find out how to knit a children's scarf in the video:

Knitted children's scarf, Swedish elastic pattern in the video clip:

POPULAR POSTS

In strong winds and frost, nothing warms our children better than a soft and cozy scarf. This master class is dedicated to just such an accessory as a scarf collar! After studying our descriptions and diagrams, you can easily knit an original scarf with knitting needles for a girl and a boy with your own hands! We hope our lesson will be useful for you, and winter and autumn walks They will give only positive things.

Voluminous scarf with braids for girls knitted. Diagrams and description

This thick yarn baby scarf is warm and voluminous, perfect for the cold of winter! We will tell you how to knit a children's scarf for a girl or boy aged 8-12, but by varying the number of rows, you can always proportionally increase or decrease the parameters of the finished product.

We will need:

• thick yarn (100% wool, 100 g per 160 m) – 2 skeins;
• straight sp. No. 5 and a set of double-sided sp. No. 5.5.

You need to knit with a density of 14 stitches in stockinette stitch per 10 cm.

The finished scarf for children will be 25 centimeters wide and 160 centimeters long.

Please study the diagrams below carefully:

Description

Using knitting needles No. 5, cast on 46 loops and proceed to a regular rib 2 x 2: 2 knit loops, 2 purl loops, you should knit 9 cm in this way. Now we replace the tool and continue knitting with knitting needles No. 5.5 (wrong side): 4 purl loops , add 8 loops along the next 17 purl loops, 4 purl loops, add 8 loops along the next 17, again 4 purl loops.

Now we begin to knit patterns: follow cx. A 56 loops, then make 4 loops along cx. When our patterns are ready, the canvas will be 150 cm in length.

Next row from the front side: k4. pet., decrease 8 pets. along the next 25 faces. pet., 4 persons. pet., decrease again 8 pets. along 25 faces. pet., 4 persons. pet..

We continue knitting with knitting needles No. 5: again elastic band 2 x 2 (2 knit stitches, 2 purl stitches) – 9 cm, close the loops with an elastic band and our scarf for children is ready!

Scarf made from ribbon yarn: video master class

Original scarf collar in the shape of a bow for girls

Warm and moderately voluminous, it is perfect for both boys and girls for damp and cool seasons. The snood holds its shape well, but is quite elastic. You can vary the dimensions (length and width) based on the child’s parameters.

We will need:

• yarn (75% acrylic, 25% wool, 50 g. 130 m) – 1.5 skeins;
• circular sp. No. 3.5 for elastic and No. 4 (we use them to knit patterns);
• 2 auxiliary sleepers for braids

We will knit the product in the round, its height will be 15 cm and width – 21 cm.

We carefully study the diagrams below:

Description

Using circular knitting needles No. 3.5, cast on 154 sts, close p. and make patterns according to cx. No. 1 pp. 1-4 only 3 times, then pp. 1-3 (the height of the elastic is 4 cm) and move on to the pattern from diagram No. 2.

According to pattern No. 2, using 4 mm knitting needles, we continue to knit patterns from 1 to 26 r and then move on to the upper elastic band (according to pattern No. 3):
1-2 pp: 2 l. p., 2 i. p., 3 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 3 l. p., 2 i. p., 3 l. p., repeat 7 p..
3 rubles: 2 l. p., 2 i. p., 3 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 3 l. p., 2 i. p., (5 to the left, 2 i.p., 3 l.p., 1 i.p., 1 l.p., 1 i.p., 1 l.p., 1 i.p., 1 l . p., 1 i. p., 3 l. p., 2 i. p.) x 6, 2 l. n. remove for sun. sp. before work, knit 1 l. p. from the left sp., then knit 2 l. n.sl. R. from left sp.. P. from sun. sp. retake to the left without knitting.
4 rubles: 2 l. p., 2 i. p., 3 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 1 l. p., 1 i. p., 3 l. p., 2 i. p., 3 l. p. x 7.
Rr. 1-4 we need to knit 3 r., then r. 1-2. Children's fashion accessory ready!

Double-sided scarf for beginners: video master class

Knitting pattern

We wish you smooth loops and pleasant autumn-winter days!

Scarf snood continues to decorate the wardrobe of fashionistas of all ages. It successfully complements classic coats and sports jackets, adds charm to dresses and zest to everyday jackets...

"So simple!" shares ideas on creating original scarves under the motto: “Minimum actions - maximum beauty!”

How to sew a scarf with your own hands

1. Two cuts of fabric, contrasting in color, and lace trim are the key to an exclusive model!
2. In this model, both fabric seams are also trimmed with lace, but of different widths. The combination of large and small cells only wins!
   
   
3. To create such a snood, you need to sew along 2 rectangular pieces of fabric (in in this case guipure and cotton), folded with the front side inward. Then the product should be turned out, ironed and the edges should be sewn together to form a collar.
   
   
4. This double-sided scarf was not sewn, but its charm was still intact!
   
   
5. Sew along the edges of the knitted fabric special tape with fasteners (buttons) to make a 2 in 1 thing: a shawl cape and a snood!
   
   
6. A scarf made of soft flannel will sparkle in a new way if you trim it with an edging made of unusual braid with pompoms.
   
   
7. To hide the edge of the braid, sew the finishing tape to the piece before joining the edges. An angled cut allows the fabric to fall beautifully.
   
   
8. At the height of fashion, voluminous flannel and wool scarves! You can save a lot of money by purchasing fabric in various colors, and then thread several threads along the cuts, giving the scarves the look of an ultra-stylish accessory.
   
   
9. Here's how to tie such a scarf.
   
   
10. Tying technique.
    
    
11. Another scarf idea with clasps. Here the buttons are attached to inserts from artificial leather. Contrasting, beautiful and functional!
    
    
12. Double-sided snood with fleece: extremely warm and cozy!
    
    
    
    
13. Inserting from wide lace miraculously transformed an unremarkable knitted scarf. Romance and chic...
    
    
14. A combination of four types of fabric to create a boho scarf. I already want one!
    
    

Children's hat with ears (made of fleece).

Winter children's hat with ears, made of fleece. Double hat. The lining of the hat is also made of fleece.



Size: head circumference 48 cm.

How to sew a fleece hat (with ears):

Cut:
1. cap wedges 8 parts (4 wedges - top of the hat, 4 wedges - lining of the cap)
2. lapel 1 piece
3. lower ears 4 parts
4. upper ears 4 parts
5. ties 2 parts.

When cutting, it is necessary to take into account the fraction. On the pattern, the direction of the lobe is shown by an arrow. On the lapel, the lob runs along the fold.





Pattern of a double children's hat with ears.

Sewing:

1. Fold the bottom ones with the right side inward and stitch, not forgetting to insert the ties. Turn out.

2. Fold the top ears right side inward and stitch. Turn out.

3. Fold the lining wedges right side inward and stitch. Press seam allowances to different sides. If desired, unstitch the seams.



4. Fold the wedges of the top of the hat with the right side inward and stitch, not forgetting to put in the top ears (stepping back 3.5 - 4 cm from the top of the hat. Press the seam allowances in different directions.

5. Fold the lapel in half with the right side facing inward and stitch along the short side. Press the seam allowances in different directions. If desired, unstitch the seam.

6. Place the lining in the hat with the internal seams facing each other, aligning the cuts. Baste the bottom ears to the lining of the hat, aligning the center of the ears with the seam. Fold the lapel in half lengthwise and align the seams and cuts to the lining of the hat. Sew. To reduce the thickness of the seam, overcast the seam.



Photo: View of the hat from the inside out.



Photo: Double children's hat with ears (made of fleece):

Children's fleece hat

This autumn children's hat with ears is made of fleece. A very simple hat model - even novice seamstresses can handle it.
Fleece is a light, soft, elastic material. Fleece is machine washable and dries quickly. Despite the fact that the base is fleece knitted fabric- the sections do not need to be overcast, because Due to the brushed surface, they do not crumble. You can sew fleece with a regular machine stitch - convenient for those who do not have knitted stitches on their machine.

How to sew a hat for a child:

Size: head circumference 46 cm. For larger or smaller sizes, explanations on construction are given.

Cut:
1. main part of the cap 1 piece
2. lapel 1 piece
3. ears 4 parts
4. ties 2 parts.

When cutting, it is necessary to take into account the fraction. On the pattern, the direction of the lobe is shown by an arrow. The lobe is located along the edge of the fabric. How to determine the share if there is no edge: because fleece is a knitted fabric with a brushed surface; to determine the grain, you need to try pulling the fabric in different directions - in the direction of the grain, fleece stretches the least (almost no stretch). Fleece may have a pile direction, which must also be taken into account when cutting.

The pattern is given without seam allowances. Seam allowances: at seams - 1 cm, along the arched part of the ears - 0.5-0.7 cm.


Pattern for a children's hat made of fleece.

If you need to sew a hat of a different size: The length of the main part of the hat is the circumference of the child’s head + seam allowances. The length of the lapel is the circumference of the child’s head + 2 cm + seam allowances. The ties and ears can be left the same. Lapel height is optional. Depending on the size, slightly reduce or increase the height of the main part.

Sewing:

1. Fold the ears right side inward and stitch, not forgetting to insert the ties. Turn out.



2. Fold the lapel in half with the right side facing inward and stitch along the short side. Press the seam allowances in different directions. If desired, unstitch the seam.

Unstitching - placing stitches on parts to secure seam allowances. It is used to secure seams on fabrics that are difficult to wet-heat treatment. The seam allowances are laid out on both sides and secured with two parallel lines.

3. Fold the main part of the hat in half with the right side inward and stitch along the short side. Press the seam allowances in different directions. If desired, unstitch the seam.

4. Baste the ears to the wrong side of the main part of the hat, retreating 7.5 cm from the seam. Fold the flap in half lengthwise and baste the seams and cuts to the wrong side of the main part of the hat. Sew. To reduce the thickness of the seam, overcast the seam.

5. Turn the hat inside out, fold it in half (so that the seam is in the middle), and stitch.



Attach the corners of the hat to the seam, aligning the upper sections, and stitch. Turn the cap inside out.



6. Sew on the applique.
It is more convenient to sew on the applique at the very beginning, but you need to make sure that the lapel does not overlap it.



Photo: children's hat with fleece ears:

Winter children's hat

Winter children's hat made of fleece. The hat is double, with ties, and covers the child's ears. The lining of the hat is also made of fleece. The edge of the cap is trimmed hand stitch"over the edge". The decor of the hat is a fleece flower, sewn on with hand stitches.

Fleece is a light, soft, elastic material. Fleece is machine washable and dries quickly. Despite the fact that the fleece is based on a knitted fabric, the sections do not need to be overcast, because... Due to the brushed surface, they do not crumble. You can sew fleece with a regular machine stitch - convenient for those who do not have knitted stitches on their machine.

Size: head circumference 48 cm.





Pattern of a children's hat.

How to sew a baby hat:

Cut:
1. top of the cap 1 piece
2. hat lining 1 piece
3. flower 1 piece

When cutting, it is necessary to take into account the fraction. On the pattern, the direction of the lobe is shown by an arrow.

The lobe is located along the edge of the fabric. How to determine the share if there is no edge: because fleece is a knitted fabric with a brushed surface; to determine the grain, you need to try pulling the fabric in different directions - in the direction of the grain, fleece stretches the least (almost no stretch). Fleece may have a pile direction, which must also be taken into account when cutting.

The pattern is given without seam allowances. Seam allowances are 0.7 cm. Cut the lining 3 mm less than the top of the hat along all edges.

Sewing:

1. Fold the top piece of the hat right side inward and stitch. Notch the corners of the seams. Press the seams.

Do the same with the lining piece.





2. Sew on the flower, placing it under it first glue web, and iron.





3. Place the lining in the hat with the seams inside. Sweep, combining the cuts.



4. Sew along the edges, departing 1 cm from the edge. Don’t forget to insert the ties. Machine stitch length 4 mm.



5. Hem the edge of the hat with a hand stitch “over the edge”. Machine stitching is very easy to navigate. The distance between stitches is two machine stitches.







Photo: Winter children's fleece hat:

You can sew a scarf like this to go with your hat:

Children's fleece scarf

The fleece scarf is light and soft. Fleece is machine washable and dries quickly. Despite the fact that the fleece is based on a knitted fabric, the sections do not need to be overcast, because... Due to the brushed surface, they do not crumble. You can sew fleece with a regular machine stitch - convenient for those who do not have knitted stitches on their machine.

Size: 110 x 13 cm (or can be made wider and longer if desired)

How to sew a scarf:

Cut:
1. made of orange fleece, two rectangles measuring 90 x 15 cm.
2. made of red fleece 4 rectangles measuring 10 x 15 cm.
3. orange fleece 4 flowers

When cutting, it is necessary to take into account the fraction. The scarf is cut along the lobe.

The lobe is located along the edge of the fabric. How to determine the share if there is no edge: because fleece is a knitted fabric with a brushed surface; to determine the grain, you need to try pulling the fabric in different directions - in the direction of the grain, fleece stretches the least (almost no stretch). Fleece may have a pile direction, which also needs to be taken into account when cutting - cut out the pant legs in one direction.

Sewing:

1. Place the flowers in the center of the red rectangles, after placing a glue web under each one, and iron them.

!!!Iron using a damp iron!!!

Sew the flowers by hand using red Iris.

2. Sew the red rectangles to the orange ones on both sides. Fold the resulting rectangles with their right sides facing each other and stitch around the perimeter, leaving one short side unstitched. The seam width is 1 cm. Turn the scarf inside out and straighten the corners. Sew open edge by hand using blind stitches.

3. Iron the scarf through a damp iron.

Photo: Children's fleece scarf:



Second version of flowers. The flowers are sewn with orange Iris.