Or rather, how to reuse a balloon. But, unfortunately, such savings do not apply to everyone. balloons, but only foil ones. - these are balls made of foil film. The basis of such balls is a nylon film coated with a continuous metal layer. Compared to latex, it is a much stronger and more durable material. They are varied in shape, color and size - shiny in the sun volumetric hearts, stars and cars, cubes and pyramids, human balls and , . These balloons are perfect for any holiday. Therefore, it is with foil balloons that you can save a lot and even come up with a whole tradition of room decoration.
1. Check the integrity of the ball after the celebration.
Foil Balloons equipped with a self-closing internal valve. Check whether the walls and valve of the ball are damaged. If the ball remains sealed, then it can be safely reused.
2. How to deflate a foil balloon.
The answer to the question “how to deflate a foil balloon” is simple - use a cocktail straw. Carefully pierce the self-closing balloon valve with the straw and push it a little deeper. Be careful! You need to penetrate the tube into the ball slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will start to come out of the balloon on its own, then press lightly on the balloon and continue releasing the air until it is flat as a piece of paper. If, after all, it is preserved in the ball a small amount of air, then use a vacuum cleaner at low power or a hand pump. Then remove the straw from the valve.
3. Storing the foil ball.
Store foil balloons in a dry, cool place and out of reach of children. If you are going to store several foil balloons, be sure to place paper between them. IN otherwise, when the storage temperature increases, the walls of the balls may stick together and become damaged. There is no need to fold them or try to wrap them into a “tube” - they can crack and tear at the folds.
4. Re-inflate foil balloons.
To re-inflate foil balloons, you can use several methods. Inflate it with air using the same cocktail straw or order a balloon inflated with helium. In the first case, the inflation process is simple, fast and economical. But he won't be able to fly. In the second case, helium will lift the foil balloon to the ceiling and last for 2-3 weeks. You can also buy disposable cylinders low pressure for storing helium and inflating your foil balloons yourself.
When inflating a foil balloon with helium, follow safety precautions. If you have any questions, it is better to contact professionals!
Balloons are an important element of room decoration in holidays. They are used to decorate halls during children's and often adult parties, shops and cafes at openings, etc. Balloons come in a variety of designs. It's not too difficult to inflate them. All you need to have for this is a helium tank.
How to inflate foil balloons
This operation is performed as follows:
A special nozzle with a sharp nose, called a reducer, is put on the nozzle of a helium cylinder.
The ball is removed from the package and straightened.
The nose of the gearbox is carefully inserted into the hole of the check valve. You need to push it deeper so that it goes inside the ball.
The cylinder valve is slightly unscrewed.
After the helium fills the balloon so that it is tight, the valve closes.
When inflating foil balloons, it is important to be extremely careful. If too much helium enters, an “explosion” will occur. Foil balls are made from synthetic, quite strong fibers. Their advantage is the almost complete absence of pores. That is why the walls of the balloon easily retain helium. However, if the pressure is too strong, the fibers still break or the seam comes apart.
In summer, when it is very hot, you should not inflate the balloons too tightly. The fact is that at high temperatures helium can expand greatly. Because of this, the balloons may burst during transportation or right in the festively decorated room.
What to do if there is no gearbox
Sometimes it happens that a helium cylinder is available, but there is no corresponding attachment for the balloons. In this case, the usual ball pen. You will also need narrow insulating tape. The handle needs to be unscrewed into two halves and the rod pulled out. Next, it is put on the nozzle of the gas cylinder and securely fixed with electrical tape. The next step is to slightly unscrew the valve, checking that everything is working properly. If the gas flows well, you can put a check valve on the other end of the handle. In this case, foil balloons are inflated in the same way as when using a reducer.
Is it possible to do without helium?
Of course, when this gas is pumped, the balls look very impressive. Helium is known to be lighter than air. And so the balloon he inflates flies up. However, this gas is quite expensive. The foil balloons themselves are very beautiful. Therefore, you can buy them and inflate them with regular air. For this you will need any thick plastic tube. It is carefully inserted into the check valve, and then the balloon is inflated in the same way as a regular rubber one. You need to be as careful as possible in in this case. Over-inflated foil balloons burst very easily. You can buy a tube in the same place as the ball. It costs about three rubles. True, it is intended, rather, not for inflation, but to make the ball more convenient to hold.
How to inflate a balloon using a compressor
Today, special equipment designed for inflating balloons is also available for sale. Deflator compressors are compact in size and very easy to use. If desired, you can use them to inflate foil balloons with both air and helium. They are used like this:
A special cap is placed on the top hole of the compressor.
The hose connector is inserted into the bottom hole of the compressor.
A flexible hose is attached to it.
The short tip included in the kit is placed on the free end of the hose.
The tip is inserted into the check valve of the ball.
The compressor turns on.
When using this equipment, it is impossible to blow up foil balloons (photos of them can be seen on the page). Excess air or helium exits through a special hole on the hose. Using a deflator, you can not only inflate a balloon, but also gently deflate it. A long nozzle is used for this.
How to tie it correctly
Drag inflated with helium or air foil balloons differently than latex ones. The check valve is usually located on a long "petal". In order to tie the ball, the ribbon is first placed at the very tip. Next, the “petal” is carefully screwed onto it so that the valve is completely closed. Then the ball is tied up in the same way as a regular one.
Where to get helium
A gas cylinder can be purchased at a specialty store or ordered online. A 10-12 liter container costs approximately 3-5 thousand rubles. You can find a cylinder cheaper. Helium refilling is carried out at specialized stations. Here, if you wish, you can rent a cylinder. One day of rental usually costs about 300 rubles, and 5 liters of gas itself costs approximately 1,500 rubles.
Today on sale you can also find very convenient compact portable gas cylinders designed specifically for inflating such decor as foil balloons. Photos of such equipment can be seen above. They are sold together with helium and are very convenient to use, since they are equipped with a special nozzle. Also, such cylinders usually come with a special liquid designed to lubricate the ball. Since helium is a very volatile gas, it still gradually leaks through the nylon walls. Therefore, a balloon filled with it can fly for no more than 15 hours. When using liquid, the ball retains its elasticity and volatility for up to a month.
Reuse Foil (Mylar) balloons can be a great way to create a birth tradition.
A great way to save some money on your holiday decorations. You can reuse old foil balloons. If you carefully release the air from foil balloons and store deflated balloons properly, they can be reused and inflated for the next holiday. Foil (mylar) balloons have a self-closing internal valve. If the walls and valve are not damaged, the balloon remains sealed and can be reused.
Reusing foil balloons requires some preparatory steps: deflating them and preparing them for storage after the first use.
How to deflate a foil balloon
Tips and instructions
You will need:
- Foil balloon
- Cocktail straw
- Helium balloon (optional)
Deflating foil balloons
You can use a cocktail straw to deflate the air from a foil balloon. Carefully pierce the self-closing balloon valve with the straw and push it a little deeper. Be careful! You need to penetrate the tube into the ball slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will start to come out of the balloon on its own, then press lightly on the balloon and continue releasing the air until it is flat as a piece of paper.
If you cannot squeeze out all the air, use your mouth to remove the last drops of air from the balloon or use a vacuum cleaner. Then remove the straw from the valve. Deflated foil balloons must be lined with paper so that they do not touch each other.
Storing foil balloons
Store foil balloons in a cool, dry place. If the balls are not lined with paper, then when the storage temperature increases, the walls of the balls may stick together and become damaged. To avoid damage to foil balloons during long-term storage, they do not need to be folded. If the balls are stored folded for too long, they may crack or tear at the folds. Ideally, foil balloons should be stored horizontally and unrolled.
Re-inflating foil balloons
To re-inflate foil balloons, you can use several methods. Most economically effective option- use a cocktail straw, insert it into the balloon valve and inflate it with your mouth. In this case, the balloon will not fly. If you order decoration of a holiday with balloons, you can also order inflating of foil balloons from the decorators. Decorators will inflate your balloons with helium gas for a minimal fee. You can buy disposable low pressure helium storage cylinders and inflate your foil balloons yourself.
artwister.ru
How to deflate a foil balloon.
Foil balloons, unlike latex ones, are distinguished by a wide variety of shapes and colors, as well as a long life cycle. With good handling of the ball and periodic inflation, the ball can last for almost years. Back in my childhood, I brought a ball from an amusement park. I was a neat and thrifty girl, so after 5 years I had to deflate the balloon because I was just tired of it already =) The foil balloon has a useful feature - a self-closing valve. Once inflated, the balloon can be left untied with tape, and can also be inflated without problems when the air is partially deflated.What to do if the ball needs to be lowered, on the contrary?
The algorithm is simple:
We free the valve from any tapes and ties, if any; - slowly insert a tube into the round hole where the valve is located (this could be a drinking straw or a stick for balls); - Gently press the ball and remove the air from it through the tube. 
Essentially, the tube opens the valve and prevents the slamming mechanism from working,
air comes out through it.
\The best part is that the balloon can most likely be inflated again later,
It will be much more convenient to do this through the same tube. =)
Happy holidays to you!
posharam.blogspot.ru
Inflate the foil balloon correctly.
Like a regular latex balloon, a foil balloon can be inflated with helium or air. To fly or not, respectively. The foil balloon is made from lavsan film, which, unlike latex, does not stretch.Therefore, the first and, perhaps, basic rule is not to overinflate the balloon.
On the heart in the photo you can see the characteristic wrinkles and stripes on the sides, next to the adhesive seams. This means that the balloon is fully inflated. But such a ball will be dense and smooth to the touch.
The second rule is closely related to the first. It is better to inflate the balloon at the same temperature at which it will be in the future. Helium, like any gas, expands when warming and contracts when cold. That is, a balloon inflated in the warmth will shrink in the cold and lose its appearance, and an inflated balloon in the cold will simply break when it warms up.
Here I will dwell in a little more detail on cases where it is still not possible to avoid temperature changes.
1. If you inflate it in a warm place, carry the balloon also into the heat, but through the cold.
In this case there is nothing to worry about. The gas will compress outside and inflate the balloon again in a warm room. The main thing is not to be alarmed by the wrinkled appearance of the ball in the cold - this is normal. Although the first time I thought that I was paranoid, and there was a strange hole somewhere in the ball that I didn’t find in time.
2. If we inflate it when it’s warm, but carry it when it’s cold.
In this case, we inflate it all the way, tighten it lightly with tape, carry it into the cold and inflate there. If the balloon is filled with helium and the main task is that it is no longer possible to fill it with helium on the spot, then we simply blow it with air. Through the straw directly into the valve. A little bit of air in the balloon will not affect its volatility, but appearance will be saved.
3. Inflate in the cold, carry into the warm.
Leave the balloon slightly soft, but in any case fill the balloon at least 2/3 full until it rises (if you are filling it with helium). How more difference temperature - the softer the walls should be. Next we bring it into the heat. If there is insufficient inflation, we do the same as in point 2 above.
The third rule has to do with the ball valve. This convenient thing allows you to inflate the balloon without having to tighten it with tape every time. With pressure inside the ball, the valve closes itself, preventing the gas from escaping back.
It looks like a round hole with a translucent (usually) film inside. 
For inflating with helium, there are usually special adapters in the form of iron tubes screwed into the main adapter. In order to inflate a balloon with just air, it is most convenient to use a cocktail tube or even a handle with the stem removed. In my case, I usually use a ball stick. We carefully insert it into the hole under the film and, if possible, takes it deep into the ball. It happens that the valve sticks a little, so it is better not to make sudden movements and insert the tube carefully and slowly. 
It is better to bring the tube exactly to the body of the ball, feeling that the valve has completely opened. Otherwise, when applying pressure (especially important when inflating with helium from a balloon under high pressure), there is a risk of breaking the valve. When finished, simply remove the tube.
You can use ribbon to tie both the valve itself (for safety) and the tail below.
posharam.blogspot.ru
How to inflate a foil balloon.
A foil balloon, unlike a latex (rubber) balloon, does not stretch and has an inflation valve rather than a neck.We have already discussed the safety rules for inflating foil balloons in the article here.
Today we will only talk about technology.
If we inflate the balloon with air.
We find the ball valve, it usually looks like in the picture: a round hole with a silver “inside” color.
We will also need a straw for cocktails (alternatively it could be a stick for a ball or even the body of a untwisted pen).
The tube must be inserted into the valve hole, under a translucent, and sometimes completely transparent film. Again, just like in the picture.
It happens that this film may not be detected. In this case, we simply insert the tube under upper layer foil towards the center of the ball. Ideally, the length of the tube allows you to move it 5-10 cm inward. This must be done very carefully. The fact is that a slamming valve sometimes tends to stick together a little (during long-term storage, excessive pressure, or simply high temperature storage). A sudden movement can break the ball and complicate the task. So, having inserted the tube a little deeper into the valve, try to make a control exhalation into the ball. If air does not flow, straighten the ball or push the tube a little deeper. If it goes, then you can start inflating the balloon. When the ball is almost strong, remember again where you are taking it and what the temperature conditions are there (see article http://posharam.blogspot.ru/2015/03/blog-post_6.html). Upon completion, you can confidently remove the tube, the valve behind it will instantly close, and the air will not escape back. If there is doubt about the strength of the valve, the hiss of escaping air is heard, and the balloon quickly loses its elastic appearance, then it is better to inflate the balloon again and tie the balloon with a ribbon above the valve. If we inflate the balloon with helium.
In general, the essence is the same, except that in this case you will have to inflate not with your mouth, but with a balloon. To inflate foil with helium, we need a nozzle for such balloons. In full set it looks like this. 
The wide part of this nozzle is screwed onto the cylinder. (You already know that when buying an adapter you should take into account the diameter of the neck of your cylinder?).
A separate adapter for foil balls is screwed into the wide part.
This is the tube that needs to act in the same way as when pumping with air.
That is, we insert it into the valve in the direction of the center of the ball, then inflate it to the required size, remove the tube and enjoy life.
Important when inflating with helium:
To avoid balloon bursts, it is better to first blow the balloon through a tube with air. That is, there is literally one exit to make sure that the valve has opened and air enters the ball without obstacles.
There is a lot of pressure in a helium cylinder, even when the valve is opened slightly. Any sudden entry into a poorly opened valve, and the valve will simply rupture.
Happy holidays to you.
posharam.blogspot.ru
Reuse foil (mylar) balloons can be a great way to create a birth tradition.
A great way to save some money on your holiday decorations. You can reuse old foil balloons. If you carefully release the air from foil balloons and store deflated balloons properly, they can be reused and inflated for the next holiday. Foil (mylar) balloons equipped with a self-closing internal valve. If the walls and valve are not damaged, the balloon remains sealed and can be reused.
Reusing foil air bags balloons require some preparatory steps: deflating and preparing them for storage after the first use.
How to deflate a foil balloon
Tips and instructions
You will need:
- Foil balloon
- Cocktail straw
Deflating foil balloons
You can use a cocktail straw to deflate the air from a foil balloon. Carefully pierce the self-closing balloon valve with the straw and push it a little deeper. Be careful! You need to penetrate the tube into the ball slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will start to come out of the balloon on its own, then press lightly on the balloon and continue releasing the air until it is flat as a piece of paper.
If you cannot squeeze out all the air, use your mouth to remove the last drops of air from the balloon or use a vacuum cleaner. Then remove the straw from the valve. Deflated foil balloons must be lined with paper so that they do not touch each other.
Storing foil balloons
Store foil balloons in a dry and cool place. If the balls are not lined with paper, then when the storage temperature increases, the walls of the balls may stick together and become damaged. To avoid damage to foil balloons during long-term storage, they do not need to be folded. If the balls are stored folded for too long, they may crack or tear at the folds. Ideally, foil balloons should be stored horizontally and unrolled.
Re-inflating foil balloons
To re-inflate foil balloons, you can use several methods. The most cost-effective option is to use a cocktail straw, insert it into the balloon valve, and inflate it with your mouth.
The second option is to use a special two-way pump. In these two options, a foil balloon inflated with air will not float.
If you order decoration with balloons holiday, you can order inflated foil balloons from the decorators. Decorators will inflate your foil balloons with helium gas for a minimal fee.
You can also buy disposable low-pressure helium storage cylinders at a specialty store and inflate your foil balloons yourself.
Foil balloons inflated with helium look tight, actively take off, and retain their appearance and volatility for 10 - 15 days. However, it also happens that after a short time, foil helium balloons become soft, flaccid and seem deflated. The buyer may not even have time to leave shopping mall, where the store that inflated him with such balloons is located. Typically, in this case, the buyer goes back to the store and demands that the balls be replaced. It becomes even more unpleasant for the buyer if the balloons begin to deflate at his home: he will not even be able to change them.
Why and how foil balloons deflate
Balloons wither and lose volatility because they lose helium. Foil balloons are made from a thin Mylar film, which is not at all elastic. Therefore, as soon as an inflated balloon loses just a little helium (a few percent), it immediately becomes soft and does not seem inflated.
Helium cannot penetrate the walls of foil balloons (unlike latex balloons), because... Mylar film is not porous. Helium leaves the foil balloons through the weld that joins the balloon halves and through the inlet used to inflate the balloon.
An uninflated foil balloon has a weld seam width of 5 - 6 mm. It should remain the same after inflating the balloon. If the balloon is pumped with helium, the volume of the balloon increases due to the thinning of the width of the weld seam (lavsan does not stretch). Through a seam of small width, helium leaves the balloon much faster than through a seam of normal width. Moreover, pumping helium into a balloon that has already been inflated is completely useless. After a short time, the ball will again be deflated.
The hole through which the balloon is inflated with helium has a check valve with a petal that locks the helium inside the inflated balloon. If the neck of a foil balloon is not tied correctly, the tightness of the check valve is broken and helium begins to leave the balloon. No matter how tightly you tie the braid, it will still not prevent the helium from leaving the balloon (lavsan is not elastic). To maintain the tightness of the check valve, it is necessary to either tie the foil balloon correctly or seal the neck of the inflated balloon on a sealer.
How to properly inflate foil balloons. Method No. 1
The method is to qualify the store personnel. Vendors who inflate and tie foil balloons must be able to do it well and quickly. You will have to spend time and a lot of balls on training staff, because... Learning from clients will cost you more.
A skilled specialist quickly inflates the balloons, keeping the seam intact, securely and beautifully ties the braid to the balloon, and does not stop communicating with the buyer.
The first method of making high-quality helium foil balloons requires nothing more than trained craftsmen. Sooner or later, trained specialists will leave and new, untrained people will take their place. And again they will have to be taught and trained.
How to properly inflate foil balloons. Method No. 2
There are special gearboxes (for example, CONWIN 83050) designed for automatically inflating foil balloons with helium. The reducer itself measures the pressure inside the inflated balloon, and, when its optimal value is reached, automatically turns off the helium supply to the balloon.
 |
With the help of this reducer, any untrained person can quickly and efficiently inflate foil balloons with helium.
Instead of tying foil balloons, you can simply seal their necks using a special sealer (for example FS200). The weld on the neck of the balloons securely seals the helium inside the balloon. A braid is randomly tied to the remaining part of the neck.
 |
With the help of a sealer, any untrained person can quickly and efficiently seal foil balloons with helium.
The second way to make high-quality helium foil balloons requires special equipment: an automatic gearbox and a sealer.
Comparison of methods
Both methods give the same result: foil balloons, high-quality inflated and tied foil balloons. The first method requires trained personnel, and the second method requires special equipment. The cost of personnel training is much lower than the cost of equipment. But sellers come and go, but the equipment remains. Any new seller, using special equipment, after the first inflated balloon, will be able to make high-quality foil helium balloons. Otherwise, beginners will have to be taught. This will be done either by other sellers or by the store owner. All this will take time, helium and balloons.
In my opinion, it is better to use special equipment than rely on salespeople. But here, each store owner decides for himself.
Good luck, colleagues.
P.S. By the way, the sealer can also be used to seal foil minifigures.
