How to iron a satin dress

Dresses are once again at the peak of popularity - the fidgety fashion has brought back feminine outfits to us. Casual, cocktail, evening - how to iron a dress to look stunning? How to avoid getting tangled in folds and frills and ruining clothes decorated with rhinestones? The question is much simpler than it seems at first glance. Useful tips and step-by-step ironing instructions for your attention.

• How to iron a dress - instructions
• How to iron a dress decorated with rhinestones and flounces
• How to iron a dress with pleats
• How to iron a linen dress

How to iron a dress - instructions

The first thing you need to do is find the label with the manufacturer’s recommendations. Before you touch the iron to the fabric, make sure you set the temperature to the correct temperature. It would be a good idea to check in an inconspicuous area on the reverse side of the product.

A hot iron is great for cotton fabrics, but silk, wool and synthetics require a special approach. The soles of modern irons are made of a material that does not leave shiny marks when ironing, but we would recommend playing it safe and ironing dresses from the inside out. Or through gauze.

Where to start and how to iron a dress? Traditionally, ironing starts from the top and then steams the bottom. If the dress has sleeves and a collar, the principle of ironing the top is the same as with men's shirts.

Note to housewives: what products can be used to wash old stains on kitchen towels.

The procedure is as follows:

In principle, everything is simple, if not for our craving for decorations, flounces and folds, which add sophistication and charm. About the nuances associated with the presence of many additional parts, We'll talk later, but for now here are a few tips to keep in mind:

• do not overdry your clothes - a slightly damp item is easier to iron perfectly;
• moisten the dress with water from a spray bottle if it has dried out;
• if there is no stand for ironing sleeves, roll up a roll from a towel;
• Make sure the soleplate of the iron is clean.

If the dress has buttons, unfasten them - this will make it easier to iron. If there is nothing to unfasten, put the dress on the narrow end of the ironing board and iron it, gradually moving the fabric.

How to iron a dress decorated with rhinestones or flounces

Stones and rhinestones decorating the dress may be damaged by contact with the iron. The first option is to iron the dress from the wrong side, placing a folded fluffy towel under the rhinestones. The second option is to use a steamer without touching the surface of the rhinestone. To protect the stones from heat, you can gently cover them with a tablespoon or teaspoon.

Ironing ruffles on a dress is a task that requires patience and attention. If the dress is made of delicate fabric, the optimal solution is to steam the ruffles, holding the iron at a distance of two to three centimeters.

We recommend reading how to wash earplugs.

Find out how to make your own antistatic agent for clothes.

Read: how to clean up your apartment after a fire.

The flounces on a cotton or linen dress need to be pulled away from the main fabric, placed on an ironing board and ironed, grabbing 5-7 centimeters of ruffles at a time. The movements are not straight, but slightly wavy.

Advice. Do not store items decorated with flounces and ruffles in a tightly packed closet; give them a little extra space.

How to iron a dress with pleats

Folds and pleating add special charm and grace to us women. But not everyone knows how to iron such a dress with folds. As strange as it may sound, ironing clothes with wrinkles begins with washing.

Gentle washing is the main rule for caring for clothes with large or small folds. A delicate cycle in an automatic washing machine or hand washing is not a whim, but a necessity. Use a washing bag: this will help preserve folds and pleats better. Some housewives recommend sweeping up the folds along the waistband and along the bottom of the dress.

If you haven't done a preliminary basting, lay the bottom of the dress on the ironing board and distribute all the folds. Use sewing pins to secure the hem to hold the fabric in position. Place the iron at the top of the crease, press the steam button and lift the iron. Then install it a little lower and do the same steps. It is not advisable to move the iron over the fabric, as there is a possibility of moving carefully placed folds.

Walk through each fold in slow steps. For greater effect, use a vinegar solution. Pour a little vinegar into the sprayer and add water. The proportion can be approximately one to three, to five. Spray creases and iron. Use vinegar to achieve razor-sharp creases. Those who steam men's trousers, are probably familiar with this trick.

The intensity of the vinegar smell depends on the concentration of the solution, but in just a couple of hours not a trace of the “aroma” will remain.

Advice. Allow clothing to dry and cool before wearing.

How to iron a linen dress

Linen is magnificent natural material, which wicks moisture away from the body and wears well in hot and temperate climates. The question of how to iron a linen dress can be replaced with: “Do you need to iron linen?” Many people believe that the slight wrinkles inherent in this fabric are part of the beauty of the fabric, and the items look great without ironing. But, if office clothes are made of linen, then you still have to iron them.

Like many other fabrics, you need to iron a linen dress when it is not yet completely dry, barely damp. If the item is dry, moisten it and leave for 40 minutes so that the fabric absorbs moisture.

Use medium to above medium heat to iron out wrinkles. Do not try to completely dry the item with an iron; this is not necessary. As soon as the wrinkles have disappeared, hang the dress on hangers - it will dry perfectly and will not wrinkle.

If you want the dress to become “hard” and hold its shape longer, use a starch solution. Liquid starch is available in hardware stores and should be diluted approximately 1:15. Spray the item with the solution and wait until the starch is completely absorbed into the fibers of the fabric. Otherwise, the iron will “burn” and ruin the clothes.

Bright, colorful and dark linen should be ironed from the inside out to avoid color fading.

Between washing and ironing cycles, that is, if you plan to wear the dress again, moisten it with water and leave it on hangers. The moisture will slightly straighten out the wrinkles; you won’t have to iron it a second time.

If you appreciate the natural wrinkle of linen and don't consider ironing necessary, simply straighten the garment with your hands while it's wet. You can dry a linen dress either horizontally or vertically (on a hanger). The natural look of linen is no less good than carefully ironed linen. Whether or not to iron a linen dress is a choice that depends solely on individual preferences.

Elegant dresses often have complex puff sleeves that baffle even experienced ironers. The video clearly shows how to deal with shaped, fashionable sleeves.

Not all brides have the opportunity to buy new Wedding Dress, and you have to rent an outfit. To make the celebration perfect, you need to think about all the little things. At such a moment, the question of how to iron a wedding dress so that the outfit becomes perfect without spoiling the fabric becomes relevant. You can entrust this work to professionals, but sometimes it is more convenient to do it at home at home.

The nuances of ironing a dress at home

Exists a large number of ways to iron a wedding dress, with which you can quickly bring the outfit into proper shape. However, this procedure has its own subtleties. Before ironing, make sure that there are no decorations on the clothes, otherwise they may simply melt during the process. To get the job done faster, invite a friend to help you.

If you decide to use an iron, you only need to set it to the delicate setting. But there is a little secret here - gauze must be used so that hot air cannot burn through the fabric. If you don't follow this advice, you risk ruining your wedding outfit. First of all, this applies to dresses for which delicate satin was used (if ironing of such fabric is unsuccessful, a hole will form or an unsightly stain will remain).

It’s best if your mother, sister or friend helps you iron the bride’s outfit, but a simple hanger can also come in handy. Hang the clothes and begin to smooth them out gradually. The iron is set to one or two, but no more, so as not to burn the fabric. It is not recommended to use steam. However, if ironing cannot proceed without this, set the iron to minimum power and keep it a few centimeters away from the fabric.

If ironing the material without steam, leave the iron at the same distance or move it a little closer to the fabric. Thanks to this method, tulle and organza are perfectly smoothed. To get the best results when using the steam mode, lightly wet the gauze (the material should be damp, but not wet) and test the iron on any other item beforehand.

If the item remains undamaged (for example, no stains have appeared on it), you can begin ironing the wedding dress. Be very careful, as a rule, when sewing an outfit, several types of fabric are used at once, which require different operating modes of the iron. If you are going to steam your veil, you will need a pan of hot, clean water.

How to iron a dress using a steamer?

If you have a special steam generator at home designed for steaming clothes, you can use it for a wedding dress. Thanks to this device, you will quickly get your outfit in proper shape. Hang your clothes, put on a special glove so as not to burn your hand, and, using a steamer, gradually work out all the folds. Then leave the outfit for a while to cool down. If necessary, repeat the procedure again.

A way to iron an outfit without a steamer

If you do not have a steam generator, use more in an accessible way. You will need a bathtub filled with hot water. Hang the wedding dress above it and leave it there all night. Lock the room until the morning. Over time, the fabric will gradually become moisturized and smooth out. Use this method steaming only if your dress is not decorated with sparkles or rhinestones. When exposed to moisture, they may simply fall off.

The method of steaming a wedding dress over a hot water bath has several significant disadvantages:

• The dress may fall into the water, after which it will need to not only be ironed, but also dried.
• High humidity may cause jewelry to fall off the outfit.
• This method does not help when the wedding dress is made of heavy fabrics.

How to properly iron a wedding dress?

To iron a wedding dress at home using an iron, you must strictly follow the simple instructions:

• First of all, prepare an iron (make sure that the surface of the device is clean, otherwise stains will remain on the fabric), gauze, pre-folded in several layers, clothes hangers and an ironing board.
• If you are comfortable, you can iron the dress on the floor, but then you will need an assistant.
• Before ironing, carefully read the label on the clothing, which should indicate the composition of the fabric. For the manufacture of almost all wedding dresses, polyester is used, which is not one of the highly wrinkled materials.
• It happens that an outfit gets wrinkled in the box during transportation. In this case, try on the dress again to check which parts need ironing. Often ironing is not required for the bodice, but the skirt must be ironed.

Wedding dress bodice

Before ironing the bodice of the wedding dress, carefully inspect the fabric for small wrinkles; they should be sprayed with water. Thanks to this, these folds will be able to “spread” slightly and straighten out before you start ironing. Iron all wrinkles, even the smallest ones. Use another one simple advice: For a while, hang your wedding dress in the bathroom where you recently took a hot shower. Humidity has a beneficial effect on the material and helps smooth out all wrinkles easily.

It is recommended to start ironing a wedding dress from the bodice. Provided that no additional materials were used for its decoration. complex elements(for example, rhinestones, beads, lace, raised embroidery), you can iron the bodice from the front side. Otherwise, turn the dress inside out and iron it inside out. Cover the board with a soft terry towel in advance. light color, this way you will protect the decor from damage.

Sleeves and hem

As soon as the bodice of the dress takes on the proper appearance, you can begin ironing the sleeves of the dress, if any. To do this, use special stands that are available on ironing boards. When ironing, apply only light pressure to the fabric. At the end of the procedure, take sheets of paper, roll them into a cylinder shape and insert them into the ironed sleeves. Thanks to this little trick, the sleeves will no longer wrinkle and will retain their shape.

You can start ironing the hem. Place the skirt on the ironing board so that the material lies as loosely as possible and does not stretch. First you need to process the petticoat, and use gauze or a special fabric designed for ironing as a filter. If you have a steamer, it is best to use it instead of an iron. The dress is hung on hangers and all the folds are worked out.

Decorative details

If you have chosen a wedding dress decorated additional elements(for example, ribbons or bows), then you will need to iron them next. When ironing bows, use the same stand as when ironing sleeves. The most important thing is to choose the optimal temperature for ironing each decorative element, taking into account the material from which it is made. Often the fabric used for a belt or bows has significant differences from the main dress material.

Plume

The train of the dress deserves special attention; you need to iron it from the front side, after which you should also work on the reverse side. First of all, the side seams are ironed, then the train is attached to an additional hanger (it needs to be positioned a little further from the main one). At the end, once all the details have been ironed, the clothes are left for some time at room temperature to cool. It is advisable to prepare your outfit at least one night before the holiday itself. This will give you time to correct minor flaws.

As a lover of fine chiffon products, I know that ironing this material is quite difficult. Nevertheless, I learned to do it carefully and efficiently. Today I’ll tell you how to iron a chiffon blouse, dress or skirt, and what mistakes you can avoid.

Chiffon ironing options: 3 ways

Delicate chiffon items require special handling. To avoid damaging them, you should resort to one of the indicated methods.

Option 1. Iron

Modern irons are equipped with many additional modes that greatly simplify the process of ironing your favorite things. You just need to figure out which one is worth using.

When ironing chiffon, you should follow a few simple recommendations:

Image	Instructions
	Selecting an ironing mode If your iron has a “silk” mode, then when processing chiffon you should use it. If the device settings indicate only degrees, then select a mode between 60 and 120 degrees.
	Take care of the lining For chiffon, direct contact with the metal surface of the iron is harmful. So either put a special attachment on the sole of the device as in the photo, or place a piece of gauze folded several times on top of the fabric. IN otherwise a hole in the chiffon is guaranteed. If you are ironing a dry item, the gauze should be wet. When processing a wet skirt or blouse, the gauze may be dry.
	Steam mode If your device has a steam mode, turn it off in advance. Items made of chiffon should only be ironed from the wrong side.

Option 2. Steamer

If you have a lot of chiffon items, then I would recommend purchasing a special clothes steamer. Taking care of him thin fabrics it will become much easier.

All you have to do is hang the product on hangers and steam the fabric. The main thing is to maintain a sufficient distance so as not to damage the material.

Option 3. Bath with water

You will be surprised, but you can iron a skirt or blouse not only on an ironing board. Some craftsmen can cope without it. The action plan is simple:

Illustration	Instructions
	Step 1. Gently wash the product with your own hands. Do not squeeze it under any circumstances.
	Step 2. Hang the item on hangers. Give it to him the required form and remove large wrinkles.
	Step 3: Run a full bath of hot water. The door to the room should be closed so that the steam does not leave the room.
	Step 4. Hang the product in the room. Wait a while and you will end up with a neatly ironed piece of clothing.

Main mistakes when ironing: 5 examples

To save you from the bitter experience of unsuccessfully ironing chiffon items, I will tell you about the most common mistakes that inexperienced housewives make in the process:

Image	Description
	Mistake 1. Spraying fabric when ironing Trying to better smooth the material, you can lightly sprinkle it with water. You shouldn't do this, as you risk burning the fabric.
	Mistake 2. Ironing at high temperatures As I already said, chiffon should be ironed at a temperature not exceeding 120 degrees.
	Mistake 3. Rubbing the fabric too hard At hand wash Do not rub the material too hard or wring it out. This will cause the fibers to deteriorate.
	Mistake 4. Ironing directly with a metal sole Don't forget about the protective cap or the same piece of gauze.
	Mistake 5. Improper storage of things After ironing, do not put blouses or skirts in the closet. Hang the items on a hanger.

Bottom line

I told you how to iron a chiffon dress, skirt or blouse without damaging the capricious material. Use my recommendations and your items will always be in perfect condition.

And I also advise you to familiarize yourself with the video in this article - there you can find useful information. Share your successes in the comments, and you can also ask me any questions you may have.

« How to iron a dress right, so as not to spoil it? - an urgent and burning question for modern girls who always want to look beautiful and neat. The fact is that today clothes are made from a variety of types, both natural and synthetic fabric. Sometimes it is very difficult to figure out how to iron a dress after washing so that it takes on its original appearance.

First of all, I would like to note that on most modern factory clothes you can find a label that indicates how and under what conditions you can wash and iron a dress made of a particular fabric. Detailed diagram with ironing icons on the label you can see in the photo below. It's a completely different matter if the dress is made to order. However, in such cases, you probably know what fabric the item of clothing was made from, so choosing the appropriate ironing method will not be difficult.

In order not to spoil your expensive favorite dress, as well as your mood, we recommend that you study the material we have prepared on the topic of home ironing of this element women's wardrobe.

Rules for ironing dresses made from different types of fabric

The rules for ironing a dress are quite simple, but we will consider special cases and different types fabrics so that emergency situations do not arise.

There are three main ways to iron dresses and other clothes:

• dry, in which the fabric is ironed only from the wrong side;
• wet, which involves using a spray bottle and clean cold water;
• with steaming, which uses a special function on the iron.

Each of these methods is only suitable for a certain fabric, but we will talk about this a little later.

First, I would like to consider the principles and basic sequence of ironing any dress at home.

1. First of all, place the ironing board in a comfortable, well-lit place. Make sure the light is coming from right side, and the connected cord will not interfere with comfortable ironing.
2. If you are unsure about your ironing method, turn the dress inside out and then iron a small area of ​​the hem.
3. According to the rules, the top part of any dress is ironed first. This includes the sleeves, neckline, shoulders and collar. Gently iron small elements of the dress with the narrow end of the iron.
4. It should be remembered that ironing women's products, be it dresses or skirts, must first be lengthwise and then crosswise, thus smoothing out even the smallest wrinkles.
5. Do not be too zealous when ironing the dress, otherwise the seams may be imprinted on the fabric. First, iron the entire fabric of the dress, and then iron each side separately, placing the iron under the hem.

However, knowing only this sequence of actions is clearly not enough; the most important thing is to correctly determine the type of fabric, as well as select the desired temperature regime. In the table below we have prepared useful information on methods for ironing dresses made of different fabrics at home.

Very often, housewives are also faced with the problem of ironing a pleated dress, not knowing how to properly process the item so as to remove all the unnecessary ones, but leave the necessary folds. In this case, you need to follow a few tricks.

First of all, you should remember that when washing a pleated product, you should abandon the functions of automatic spinning and drying in the machine. You should also wash a dress with folds with conditioner: this way you can prevent the appearance of severe creases on the clothes. Little trick! If you want to preserve the factory appearance of the product as much as possible, before washing it by hand, sew the folds with a natural thread that matches the color. You also need to dry such a dress on a hanger, smoothing it out as much as possible and giving it its original shape. Don't be afraid to use steam when ironing a pleated dress: this will only improve the condition of the folds and highlight them.

Often dresses are made from more than one type of fabric. On beautiful evening products you can find lace inserts, embroidery and other elements. self made. Washing, drying and ironing such areas on the dress should be treated with the utmost care and caution. Before ironing, make sure you know what threads each item was made from. Lace must be starched.

Here are a few more useful tips for ironing a dress at home:

• if the fabric of the dress does not tolerate high temperatures, but the folds on the product cannot be smoothed out in any other way, hold the fabric over a basin with very hot water: the steam will help soften the product and it can be ironed with a warm iron;
• If there is an iron mark on your silk dress after ironing, mix baking soda and warm water until mushy, rub the resulting mixture onto the damaged area, and then remove the mixture after drying and be sure to rinse the dress after the procedure;
• Never iron a dress if there are stains or stains on the fabric, otherwise it will be almost impossible to get rid of them later;
• After ironing the dress, let it cool completely, then put it on a hanger: this way the product will keep its shape longer.

In order not to spoil your favorite dress, be sure to make sure that you take into account all the features of the fabric, and also choose the optimal method for ironing the product!

Getting your clothes in order without an iron

You can put a dress and any other clothes made of delicate fabric in order without using an iron. There are not many methods, but they are all quite effective and not too expensive.

1. You can remove wrinkles from your dress using hot steam. This method is relevant for almost all types of fabric, so you can use it without worrying about your favorite clothes. The dry dress should be hung in a small closed room over a basin or bathtub with very hot water. Some 20-30 minutes will be enough to soften the fabric and rid it of wrinkles. Be sure to remember to properly dry the dress ironed in this way.
2. Mug with boiling water. You need to use a metal mug, otherwise it will be ineffective. Don't forget about the safety rules and be sure to wear gloves, otherwise you can get burned. After filling the cup with boiling water, cover it with a lid or something suitable, and then gently iron the problem areas on the dress.
3. Folk remedy. Few people know, but you can get rid of wrinkles on a dress very easily if you use this folk method. In a spray bottle, combine table vinegar and fabric softener in equal proportions. Shake the liquid, spray it onto the fabric, and then let the dress dry. After this procedure, the folds will disappear by themselves.

Of course, such methods will be less effective than conventional ironing. However, if you are too worried about the condition of the dress fabric, you can try one of these folk ways iron the product at home without an iron.

Women always want to remain delightful, and a celebration is an opportunity to demonstrate their attractiveness to others. And every little detail is important here: hairstyle, shoes, accessories, clothes.

But sometimes it happens that a girl purchased a dress in advance, and before the event she noticed that the folds, ruffles or bows were wrinkled. Typically, a steamer is used to remove wrinkles.

But what to do if there is no such device on the farm? There are several options for steaming a dress at home without a steamer.

When should you iron your dress?

• the item was wrinkled during transportation;
• the product is prepared for sale;
• the dress will be stored in a box;
• it was recently washed.

It is important to know that not all materials are allowed to be ironed. This applies to outfits made of heavy, dense fabrics, such as viscose or gabardine.

In addition, do not forget about the decorative elements that adorn the dresses. Areas with rhinestones, lace and beads are more difficult to smooth out. In addition, there is a risk of burning or leaving a stain on delicate fabric.

Proven methods

If you don’t have the opportunity to buy a steamer or order a dress steaming service, then try to do everything yourself. The main thing is to be patient and follow the instructions, then everything will work out. To smooth out wrinkled fabric, you only need water or an iron.

Proven methods for steaming holiday outfits:

• A saucepan with boiling water.
• Steaming in the bathroom.
• Smoothing with an iron.

Each method has its own disadvantages and advantages. To smooth out the dress and not ruin it, you need to strictly follow the instructions and enlist the support of a loved one.

Experts still advise you to negotiate with the salon where you bought the dress so that the outfit can be steamed before the special event. Salons provide this service free of charge or for a small fee. Although there is still a possibility that the dress will get wrinkled on the road. For this reason, it is important to know how to tidy it up without using professional equipment.

Steaming with boiling water

A budget-friendly, but not the easiest way to iron a holiday outfit is steaming over boiling water.

To perform this procedure, follow the instructions:

1. To avoid damaging the dress, ask one person to help. He will hold the item so that it does not fall into the hot water.
2. Boil water in a saucepan.
3. Hang the product on a hanger or clothesline.
4. Bring the wrinkled areas to the steam and hold for a few seconds to smooth out the fabric.
5. Let the dress cool. Ready!

The danger with this method is that delicate fabric You can’t keep it over steam for a long time, as there is a chance that it will shrink too much. After this, it cannot be smoothed out even with a steamer. In addition, holes may appear in the canvas due to hot steam.

If a girl performs this manipulation on her own, then there is a possibility that the item will fall into boiling water. An assistant will help you hold bouffant skirts so that they do not get into hot water.

Steaming in the bathroom

Instructions:

1. Open the hot water tap and close the door.
2. When the room is filled with steam, carefully hang the product above the water at a distance of 20 - 25 cm. Securely fasten the dress to a hanger or rope.
3. Leave the room, close the door. The item will be steamed for 4 to 8 hours.
4. Hot steam will smooth out all the creases in the fabric, after which the dress will look amazing. Let it cool and put it on.

This is what they do with wedding and children’s wrinkled outfits.

This steaming method is suitable for one person, it also does not require material costs, but there are some risks. If you do not fasten the item securely, it will fall into hot water and become deformed. If the dress has decorative elements(rhinestones, stones, beads), they can come off under the influence of hot steam. If the item is made of heavy material, then this method of steaming will not help smooth out wrinkles.

Ironing the dress

Iron elegant dress It’s scary to use an iron, because there’s a chance of burning through or leaving delicate fabric on it. ugly spots, high. But to prevent this from happening, remember the main rule - you need to iron the product through the fabric, and not directly. For this purpose, use gauze or special material that is sold in salons.

To iron your dress before a special event, prepare the following materials and tools:

• spray bottle filled with water;
• gauze or thin white cloth;
• iron;
• ironing board.

To iron lush dresses, ask someone to help you. The assistant will hold, straighten, and turn the fabric. As for the temperature setting, it is recommended to turn the iron on at one or two (but this is the maximum).

It is better not to use the steam function; it is necessary in extreme cases when the material does not smooth out at all. But only delicate steam mode is allowed.

The canvas is covered with 2–3 layers of dry gauze or a special cloth and smoothed with an iron, without staying in one place for a long time. It’s better to start with a one; if the folds do not disappear, then turn on a two.

If the dress consists of different materials, then adjust the temperature for each type separately. To find out the appropriate temperature range, check the label on the back of the product.

For example, for satin dresses, twos and pairs on a delicate mode are suitable, for organza - one and no pairs. But in any case, gauze is used for ironing.

If you use an iron to iron a veil or tulle dress, then walk along the edge of the product before the procedure. If the fabric is not damaged, continue ironing the item.

Rules for ironing elegant dresses:

• First, smooth out the bodice. If the product has trim (stones, chains or lace), then turn it inside out and place it on a terry towel. If there is no decor, iron the item from the outside, but through gauze.
• To smooth out the sleeves, use a special stand on the board. Do not press hard on the canvas; the folds disappear with a little pressure on the desired area. To prevent folds and creases from appearing on the sleeves again, insert small plastic bottles or rolled paper.
• Adjust the iron temperature separately for bows and ribbons that are made from different fabrics.
• Iron the skirt, starting from the lining, through the fabric, activating the delicate mode. If the skirt is multi-layered, then smooth each layer separately, gradually reaching the top.

Now you know how to steam an elegant dress at home. Regardless of which option you choose, follow the instructions and everything will work out for you.

After ironing, leave the dress on a hanger to prevent wrinkles from forming.

If the dress is expensive or you are not confident in your abilities, take it to a salon, dry cleaner or cleaning company. Specialists will remove wrinkles using professional equipment without damaging appearance products.