Both beginners and experienced seamstresses can make an owl costume. The main thing is to follow the instructions and maintain the proportions, and then everything will work out!
How to sew an owl costume with your own hands
First of all, go to the store for fabric. The basis for a children's owl costume ">take thick brown burlap. For a child 3-5 years old, 2 m is enough with a standard fabric width of 1.5 m. For feathers, buy a beige mesh. You don’t have to buy the rest of the fabric and use scraps of old clothes.
"> Let's start the pattern. To do this, cut 1.2 m from a piece of fabric and attach it to the rest of the fabric. Thus, the future hood will remain in one layer. Cut it out as shown in the picture. The white dotted line marks the line that needs to be sewn. Green is the place for the face. It is better to trim this edge with braid so that small threads do not fall off and get into the child’s eyes. Don’t forget to cut out the sleeves. geometric figure- rhombus There should be enough fabric for them. Now let's make the body owl costume ">The hole where the sleeves are sewn is marked in blue. The yellow lines are the place for stitching.
If you run out of time or patience, leave the costume as is. So your baby will look like a hermit monk. If this option is not suitable, let's start decorating. To do this, sew mesh fabric onto the front part.
From above, manually sew the patches on top of each other. Move from bottom to top, then the seams will be hidden under the next layer. IN This is how the owl’s costume is already taking shape.
Now sew the patches onto the sleeves and stitch the piece to the suit. It’s good if the shreds are also in the autumn colors, which will give children's costume owls whole and thoughtful look.
All that remains is to “revive” the owl costume. To do this on Sew on the eyes and beak for the hood, and if there is burlap left, make small ears. It will look very cute.
More options for owl costumes
The main advantage of such costumes is that they are easy to make yourself. Instead of an owl's head for a costume, you can use a regular brown hat, onto which you can sew eyes and a beak.
The simplest option is sweatshirt suit black or brown. For girls you can use hoodies bright colors, such as pink, red or yellow.
Masks for an owl costume
A child may feel hot at a party wearing a hat or hood, so you can simply use a mask with an owl’s face as the top part of the costume. As a rule, they are made from felt (since it does not crumble and holds its shape), but they can be made from colored paper.
Get creative and come up with funny children's costumes! And since the coming year of the horse, you might like it. Happy holiday!
How to make an owl or eagle owl costume with your own hands?
- wear underneath holiday dress or suit
- sew a cape or simply take a white or brown scarf to which you need to sew rounded teeth made of fabric or paper, it is desirable that the cape matches the suit worn underneath
- to make a mask, you can find a template on the Internet and cut it out of cardboard, and then decorate it (you can take the same rounded teeth from paper), or buy a ready-made one
- You can wear hairpins with feathers on your head, but this is more suitable for girls
you can do this one do it yourself without any step by step wizard classes.
Take it old T-shirt and either on sewing machine or simply glue pieces of owl feather fabric on top of each other. If you decide to glue, then choose a special glue for fabric, sold in any haberdashery.
And if you need a master class, then look here for another option.
In order to make/sew an owl or eagle owl costume you can use the following idea:
Here are a few ideas that have already been implemented to create festive owl costume:
I'll tell you a very simple master class on creating an owl/owl costume.
We will need fabric in two or three colors. For example it could be Brown color, black and milky. Or you can take brown, beige and white fabric. Flannel works very well for this purpose. There is flannel that does not fray, so we can work with this fabric without using an overlocker.
We will need to use a square of each color. For example, if we are making a costume for a child, then a square meter by meter will be enough. For an adult, a square of one and a half by one and a half meters is useful.
You will need to make a circle out of the square, then decorate the circle at the bottom beautifully in the form of petals.
We do this every circle, but each subsequent circle must be reduced a little in diameter. In the future, when applying circles from fabrics of different colors, we will get an excellent result.
Let's make a cutout in the circles so that you can put the cape over your head.
There can be as many circles as you like. There are eleven of them in the suit in the picture.
Perfect for a cape like this black will do or brown turtleneck, black jeans/pants/leggings.
You can sew a hat with ears on your head or make a paper mask.
Owl hat for girls and boys. The hat is knitted and decorated to imitate the eyes and beak of an owl.
For the suit you will need velvet fabric in brown and beige colors. A dress with three rows of flounces is sewn for a girl. Detachable wing sleeves. Insert on the chest. white tights and boots. For a boy, you can sew a shirt and trousers in the same style.
More details here
All the costumes that I consider making with my own hands, I first of all evaluate them from the point of view: how to get by with the least amount of time and money.
For any clothes of gray, brown, beige or black, namely a turtleneck or T-shirt,
We sew on feather elements, matched by color in one key.
It looks like this:
For believability, we make a mask.
The mask can be made from felt.
Or even simpler from cardboard.
To do this, you can simply print out the templates and assemble everything as shown in the figure.
The best way to do this is to use strong paper or glue a regular one onto cardboard
Sewing an owl costume
As a rule, owls are mottled, white-gray-brown in color. Its most important element is its luxurious wings and round, expressive eyes. You can use any black, white, gray or brown bolero as the basis for the wings. Carefully sew patches of matching colors on top of it to create multi-layered, voluminous, fluffy wings. This is a labor-intensive process, but you will amaze everyone at the upcoming masquerade.
If you don’t have a bolero, sew the base for the wings yourself. To do this, cut out a large circle from the fabric, the radius of which will be slightly larger than the length of your arm from neck to fingertips. In this circle, exactly in the center, cut another small circle through which your head will fit. The result is a homemade bolero, which we also trim with gray, white, black and brown scraps of fabric.
It looks very impressive when the basis of the owl costume is ordinary, rough potato sacks. Sew a bolero and a skirt out of them, and also sew different scraps on top, but not only fabric, but also rustling ones garbage bags black color. Then the costume turns out to be even more expressive, due to the fact that it makes rustling sounds when the wing flaps.
In both options, under the resulting wings, you should wear a turtleneck and leggings in the colors that are present on the scraps of fabric sewn on the bolero.
We sew a headdress for an owl costume
Now let's take care of the headdress. Take an ordinary cap with a visor and sew your eyes over it. An eye can be made from the bottom plastic bottle by painting it with yellow nail polish or acrylic paint with a glossy effect, draw a pupil in the center in black. Such eyes can be sewn to a cap using the largest needle. Also, the eyes can be sewn from bright yellow fabric, again, not forgetting about the black pupil. The owl's eyes should be very noticeable and expressive. Then the ears are sewn to the cap, which are filled inside with synthetic padding or any other padding, because the ears must stand up. After all this, decorate the cap with scraps of fabric in the same way as the bolero.
You can wear big, big round glasses instead of a cap - they will be your eyes. And on the head is a hat with ears, decorated with scraps of fabric.
If you have an old feather pillow lying around the house, it will be very useful to you; carefully gut it and decorate the resulting costume with real feathers, which can be attached to the fabric with glue.
Owl
If you cannot sew, then using this method you can make an owl costume for a girl using glue. Materials:
- Gray and black fabric. you can use old clothes, since only scraps will be needed in the work.
- Scissors.
- Needle and thread or Moment glue.
- Sunglasses.
- Use a simple black dress or turtleneck with a skirt as a base.
- Cardboard.
- Stationery knife.
- A printer.
- Lace.
Progress:
5. Insert ribbon or string into the edges of the mask.
Ready! If you replace the feathers with white, you get the Polar Owl costume.
Wings
The most important detail of the costume is the wings. If everything is simple with the upper part (as a last resort, you can find matching hat), then with the bottom it is much more difficult. What you need to create an owl costume:
- Black jacket.
- Scissors.
- Owl mask.
- Glue.
- Shiny ribbon.
- Fabric for the base of the wing.
- Fabric scraps for feathers.
- Cardboard.
What to do:
The owl costume is ready!
Owl face
A DIY owl costume is made from the cheapest materials. For the muzzle you need:
- A cap. Look for a suitable one in old things or in a cheap store.
- Buttons.
- Felt or felt.
- Scissors.
- Glue.
Progress:
- On the fabric of your choice gray draw two large circles, a little smaller on the white one and the smallest ones on the black one. Cut out a rhombus from the orange one (this is the nose).
- Cut out the pieces.
- Sew buttons to the black pieces.
- Glue two gray circles close to each other, glue the main parts and the nose in the middle to them.
That's all. Simple creation of a face for an owl costume.
Owl skirt
To get a full-fledged owl costume with your own hands, you need to think through every detail. Create a skirt. Materials:
- Tulle of three different shades brown.
- Black elastic band.
- Threads.
- Scissors.
What do we have to do:
- Measure the child's waist and cut the required length of the elastic according to this size. Sew its edges together to form a closed circle.
- Place it on the chair.
- Now, from tulle of each color, cut strips ten centimeters wide and twice as long as necessary (choose the length yourself, based on the age of the child).
- Fold the strip in half and place a loop behind the elastic. Pass the loose edges through the loop. Don't overtighten the elastic. Place all strips tightly to each other.
- This way you need to fill the entire elastic band.
The skirt is ready. This addition should be used once you have created the wings, body feathers and muzzle.
Wings-cape
An easy to remove owl costume is made from:
- Fabrics for the base of the wings.
- Contrasting fabric.
- Ribbons suitable color
Well, the required materials: scissors, thread, cardboard and clear varnish or a lighter (to secure the edges of the tape)
What to do:
- Measure from the back of your neck to your waist to your wrist.
- Fold the fabric chosen for the base of the wings in half. Mark the distance from the neck to the waist on the fold, and the distance to the wrist on the free edge.
- Cut it out.
- Draw a pattern of feather rows on cardboard. Using it, make the necessary details on fabric of different colors.
- Glue or sew feathers onto the main fabric.
- Burn or paint over clear varnish edges of the tape. Sew it along the neckline and leave free edges for tying.
Now you know how to make an owl costume different ways. See how simple and beautiful everything is at minimal cost!
Despite the fact that the times of peak popularity of Harry Potter have already passed, the fashion for owls remains. Plus, the owl is one of the “emblems” of autumn, since autumn is always associated with nostalgia and the beginning of studies in schools and universities, and therefore with knowledge and wisdom. Making an owl costume is quite simple, and with one of the options below, you will only need a few available materials, a couple of hours and, by the way, no sewing. In total, here we will look at 2 options: there are different owls, and so are the ways to make a costume. Both costumes can be made to fit any size: for both children and adults. First, you will have to buy some inexpensive and preferably plain clothes.
Option 1: common brown and black owl.
Prepare in advance:
- a brown sweatshirt or tracksuit top - always with a hood;
— brown sweatpants;
- a lot of felt or felt of 3 shades: brown, tan, black;
- scissors;
- fabric glue.
1. Cut out the simplest shapes of feathers from felt/felt in brown and tan colors. Three times less of the same black “feathers”. For a child you will need about 200 feathers (not too large, but not miniature, of course). Increase their number if necessary.
It is undesirable to use real feathers, especially if they are fluffy, which are not difficult to find in a craft store, simply because a lot of them will be required, and the fluffy creature in the end is unlikely to be mistaken for an owl, but rather for some small one a bird, a chicken, or even a chicken. Still, the image of a brown owl is somewhat more cruel, brutal, if you like.
2. Choose the size and density of the sweatshirt and trousers, taking into account that 200 felt feathers is still not the lightest load, and loose and/or stretchy fabric or things that are large will certainly sag unsightly with such weight. If there are no special options, and you have to buy a suit a size larger when you go to a holiday, wear several things under it for density and volume, taking into account the temperature in the place where you are going.
3. Place the sweatshirt on the table (any flat, hard, wide surface) and begin gluing the “feathers” to it using fabric glue. Start from the very bottom of the jacket and constantly vary the colors of the feathers: brown - tan - brown - tan - black and so on. Be sure to make sure that each new row of feathers that goes higher covers about 2/3 of the lower row - this is the only way you will subsequently be recognized as an owl.
4. Glue feathers onto the sleeves up to the top of the arms, also starting from the bottom and working towards the shoulders.
5. Cut two circles from dark brown felt, each approximately 7.5cm in diameter. Cut two circles from lighter brown felt, but approximately 5 cm in diameter. Finally, cut out 2 2.5cm circles from black felt.
6. Make owl eyes by placing circles on top of each other and gluing, starting with the largest and then decreasing to black on top. Glue the eyes to the hood.
Option 2: snowy owl.
This costume is more complicated, but snowy owls always look more impressive.
Prepare:
- again a hoodie, but already white;
- similar trousers, but also white, or maybe gray, gray-black;
— feather boa - white or with light splashes of gray/black;
- tailor's measuring tape or any analogue, up to a tape measure with a soft plastic tape;
- an assistant (it will be difficult to take measurements alone);
- mask;
- paints;
- scissors;
- threads and needles;
- feathers;
- fabric glue;
— fabric: felt, fleece.
1. Take a white sweatshirt (or white-gray-black) with a hood and white or gray (or with gray/black patterns) trousers as the basis of the suit. Regarding the size and other nuances, see point 2 from the first option.
2. Measure the circumference of the open neck and front perimeter of the sweatshirt's hood.
3. Cut this length from the boa.
4. Thread a needle with white cotton-coated polyester thread ( best option thread for all purposes).
5. Sew the cut part of the boa to the edge of the hood and the open part of the throat using a zigzag stitch: push the needle through the fabric from the back of the hood/throat from the edge, pull it out from the outside, cross the thread through the boa from above, and stick the needle again from the back side of the edge of the hood. And so on from the middle of the throat in front, through the front of the hood and again to the middle of the throat on the other side.
6. Measure the circumference of the bottom of the sleeves of the sweatshirt, as well as the circumference of the bottom of the pants.
7. Cut 4 matching boa pieces.
8. Using exactly the same seam, sew parts of the boa along the very bottom of the legs and sleeves. If there are no problems with buying several boas, you can sew such pieces of it in circles one above the other: it will look more like fluffy owl legs. On the arms and legs, pieces of boa can always be replaced with white/white-black fluffy feathers, this option is just more labor-intensive.
9. This item is optional, but here you can sew/glue white/white-gray-black felt feathers in the same way as in the first version of the costume for complete authenticity.
10. Take the simplest one white mask only on the eyes (you can sew it yourself without any problems - like in the picture, only white) and with paint or, for example, a permanent marker, draw a black stripe in the area of the nose, which will be designed to indicate the beak of a snowy owl. Let the paint dry.
11. Rotate the mask back side to yourself. Glue white fluffy feathers on top and bottom around the entire perimeter so that they stick out in different sides. To prevent the tips of the feathers from hurting you or getting in the way, cut out a mask from white felt (or any fairly dense fabric), for example, the same size as the inside of the first one, and stick it on the feathers. Let the glue dry.
12. From here onwards, follow if you missed step 9. Call an assistant. Stand up straight, spread your arms straight out to your sides. Have an assistant measure the length diagonally from each palm to your waist. Also take the measurement from behind, but from wrist to wrist across the back.
13. Cut a rectangle from snow-white (or with gray-black splashes) fleece. One side should be equal to the length of your arms (from hand to hand), the other - diagonally from the palms to the waist.
14. Sew fleece to sweatshirt. The best way to do this is to use a running stitch to attach the fleece to the jacket across the top of the back and to the tops of the sleeves (at the shoulders).
15. Cut the fleece from the bottom into 2.5 cm wide and 15.2 cm long strips: they will simulate wings and feathers.
16. Glue or sew white or black/gray/white feathers onto the fleece. Cover as much of the fabric surface as you can.
17. When you are ready to put on a suit, it is best to complement it with gray/black pumps/flat boots and wrap the rest of the boa around your neck (under the hood).
As a rule, owls are mottled, white-gray-brown in color. Its most important element is its luxurious wings and round, expressive eyes. You can use any black, white, gray or brown bolero as the basis for the wings. Carefully sew patches of matching colors on top of it to create multi-layered, voluminous, fluffy wings. This is a labor-intensive process, but you will amaze everyone at the upcoming masquerade.
If you don’t have a bolero, sew the base for the wings yourself. To do this, cut out a large circle from the fabric, the radius of which will be slightly larger than the length of your arm from neck to fingertips. In this circle, exactly in the center, cut another small circle through which your head will fit. The result is a homemade bolero, which we also trim with gray, white, black and brown scraps of fabric.
It looks very impressive when the basis of the owl costume is ordinary, rough potato sacks. Sew a bolero and a skirt from them, and also sew various scraps on top, but not only fabric, but also rustling black garbage bags. Then the costume turns out to be even more expressive, due to the fact that it makes rustling sounds when the wing flaps.
In both options, under the resulting wings, you should wear a turtleneck and leggings in the colors that are present on the scraps of fabric sewn on the bolero.
We sew a headdress for an owl costume
Now let's take care of the headdress. Take an ordinary cap with a visor and sew your eyes over it. An eye can be made from the bottom of a plastic bottle, painted with yellow nail polish or acrylic paint with a glossy effect, and draw a pupil in the center in black. Such eyes can be sewn to a cap using the largest needle. Also, the eyes can be sewn from bright yellow fabric, again, not forgetting about the black pupil. The owl's eyes should be very noticeable and expressive. Then the ears are sewn to the cap, which are filled inside with synthetic padding or any other padding, because the ears must stand up. After all this, decorate the cap with scraps of fabric in the same way as the bolero.
You can wear big, big round glasses instead of a cap - they will be your eyes. And on the head is a hat with ears, decorated with scraps of fabric.
If you have an old feather pillow lying around the house, it will be very useful to you; carefully gut it and decorate the resulting costume with real feathers, which can be attached to the fabric with glue.
smallfriendly.comTo turn a child into a magical creature with the body of a lion, the head and wings of an eagle, you will need:
- a beige or yellow jacket and pants - this will be the body of a lion;
- brown or beige fabric and threads for the tail;
- two pieces of felt or fleece for the wings and chest: one lighter, the other dark;
- cardboard and paints for masks;
- glue;
- stapler
To make the tail, roll the fabric into a tube and seal the edge. Then sew or staple a tassel of thread of a suitable color. After this, the tail can be sewn to the pants.
incostume.ru To make the wings, draw a pattern on paper with sharp, ragged feathery edges. Then make two more templates for other layers, each one narrower than the previous one. Transfer the templates to felt, cut out the wings and sew them together, placing the darker fabric between layers of light.
Sew the finished wings to the jacket. Make loops for fingers at the ends so that the child can flap his wings and they are constantly in motion, and not hanging behind his back.
smallfriendly.com Using three layers of fabric, use the same principle to make feathers on the chest.
smallfriendly.com If you don't want to work with fabric, you can make wings from cardboard and paper.
Next important point- mask. The photo below shows a beautiful option cardboard mask griffin. First cut out the pieces and then glue them together and color them.
alphamom.com An owl costume is easier to make. Take:
- black or gray long-sleeved T-shirt;
- several pieces of fabric in gray and brown shades;
- cardboard or paper and paints for the mask.
Download and print the template, transfer it to fabric and cut out feathers in different colors. Sew them onto the T-shirt in a checkerboard pattern.
Owl feathers / alphamom.com The owl also needs a mask with a beak. You can make a simple version from cardboard or complex masks from paper. Here are some examples of multi-colored fantasy masks:
parents.com For the sheep costume you will need:
- bodysuit or jumpsuit;
- glue;
- about 50 white pom-poms (can be purchased at craft stores);
- white and black felt for ears;
- hat or felt for the hood.
Cut off the sleeves of the bodysuit, glue pompoms onto it so that there are no free space. Then cut out two black ears and two white ones from felt. Glue black felt onto white - this will be the inner layer of the ear.
Glue the ears onto the cap or hood, and then cover the entire surface with pompoms.
For the shark costume you need:
- gray hoodie;
- white, gray and black felt;
- thread or fabric glue.
Cut out a dorsal fin from gray or white felt, a row of teeth and a circle for the belly from white, and eyes from black.
livingwellonthecheap.com Sew or glue all pieces to the sweatshirt. If the sweatshirt has a zipper, cut the white circle in half and sew the halves on either side of the zipper.
livingwellonthecheap.com
coolest-homemade-costumes.com, parents.com You will need:
- wide-brimmed straw hat;
- fabric glue;
- stuffing for toys;
- red and white fabric: for the outer part of the hat you can use red felt or plain cotton, for the inner part white cotton or crepe is suitable;
- white lace.
Cut a circle out of red fabric and sew it to the top of the hat, leaving room for the stuffing and a hole to tuck it through. Stuff the hat, distributing the filling evenly so that it takes the shape of a mushroom. Spread the filling evenly inside the mushroom cap and then sew the hole shut.
Sew on the inside of the hat with a gather white fabric so that it resembles mushroom plates. Next to the head, sew several layers of lace, like a fringe around the leg of the fly agaric.
burdastyle.com
fairfieldworld.com, lets-explore.net If your child loves Harry Potter films, you can make him a Hogwarts student robe. To do this, take:
- a piece of black fabric;
- a piece of fabric in the color of your favorite faculty;
- cardboard for the faculty badge;
- tie or scarf in the colors of the faculty.
The gallery below shows the basic steps for making a mantle. The fabric of the outer layer of the robe should be black, and the color of the lining depends on the faculty.
Sew the faculty badge to the robe. You can cut it out of paper or order it, for example, at the Crafts Fair. You can also complement the outfit with a striped tie or scarf from Gryffindor or another house. Both can be bought for 400–700 rubles.
Using approximately the same scheme, you can make a wizard's robe with stars. For it you will need:
- a piece of blue fabric;
- shiny yellow fabric or golden wrapping paper for stars;
- hard felt for the cap;
- Magic wand.
Sew the wizard's robe according to the pattern shown above, but without the front slit and lining. Top in in no particular order sew or glue the stars.
Cut two triangles of the required length from hard blue felt and sew them together, glue on the stars and crescents, as on the mantle. Also, the cap can be made from a sheet of blue cardboard with gold stars wrapping paper. And don't forget about the magic wand!
You will need:
- yellow hoodie or yellow long sleeve and beanie;
- blue denim overalls;
- black gloves;
- swimming goggles or homemade minion goggles.
halloween-ideas.wonderhowto.com To make the glasses, take two pieces of 7.5-10mm PVC pipe with a diagonal cut and six small nuts.
youtube.com Coat the pipe scraps and nuts with silver paint and let them dry. Then glue the pipe pieces to each other to create glasses. Decorate them with nuts on the top, bottom and sides.
youtube.com Use an awl to make several holes on the sides and sew on an elastic band.
youtube.com 8. Rey from the new Star Wars trilogy
thisisladyland.com Rey costume from the universe " Star Wars"Can be made without threads and glue. The main thing is to find the right things:
- white or gray T-shirt;
- gray pants;
- brown leather belt;
- gray wool tights;
- black boots;
- long gray scarf.
thisisladyland.com You can make arm ruffles from tights, and a cape from a scarf. Just throw it around your neck, cross it over your chest and leave the ends to fall freely, securing it at the waist with a belt.
You can complement the costume with a Jedi sword or BB-8 made of papier-mâché.
thisisladyland.com The costume consists of wings and a hat with antennae, the rest of the clothing is at your discretion. This could be a T-shirt with pants or a skirt or elegant dress. The main thing is that they are black or red with a black dot.
For the wings and cap you will need:
- two sheets of A3 red cardboard;
- black paint;
- foam sponge;
- red laces and tape;
- black nylon tights;
- flexible sticks for children's creativity(can be bought on AliExpress).
Cut out wings from cardboard, take a foam sponge cut in the shape of a circle, and put black dots.
thisisladyland.com Make holes in the wings, thread the red string through as shown in the picture below, and seal with tape. The child will thread his hands through the resulting loops.
thisisladyland.com To make a hat, cut off a thick stocking nylon tights, tie one end into a knot and turn it inside out so that it is not visible. Towards the end, make two neat holes. Insert the black stick into one hole and take it out of the other.
thisisladyland.com Bend the ends of the stick to create insect antennae. The suit is ready.
triedandtrueblog.com Toothless is a cute black dragon from the cartoon How to Train Your Dragon. For this costume you will need:
- black hoodie and pants without logos or designs;
- black fabric for the horns, comb and tail: it should be at least approximately similar to the material of the sweatshirt;
- black and red felt and White paint for part of the tail;
- stuffing for toys;
- paints, old glasses or cardboard for eyes.
Sew four horns: two larger and two smaller. Stuff and sew them to the hood.
Calculate the length of the comb and tail so that the tail just touches the ground. Sew the scalloped comb and tail.
triedandtrueblog.com Cut two blades from black and red felt and sew on either side of the end of the tail. On the red part, paint a horned helmet with white paint.
Toothless's tail from the cartoon / vignette2.wikia.nocookie.net Once the comb and tail are ready, sew them to the back of the sweatshirt.
For the eyes, you can use lenses from old glasses. Draw Toothless's yellow eyes with vertical pupils on them and glue them to the hood. If you don't have lenses, you can make eyes out of cardboard.
The main costume is ready, all that remains is to make the wings. For them you will need:
- fleece;
- two wire hangers;
- black fleece;
- 45 cm elastic bands;
- threads;
- scissors;
- wire cutters
Print the pattern and cut it out of paper. Transfer the template onto a sheet of fleece.
feelincrafty.wordpress.com Place the fleece wings on the wrong side of the fleece with the adhesive side facing the fabric and iron. Cut the fleece to the shape of the wings.
feelincrafty.wordpress.com 
feelincrafty.wordpress.com Remove the paper layer from the wings and place the wire “bones” of the wings on the adhesive layer. Then place the fleece on top and press firmly with an iron so that the glue and fleece adhere. Cut the fleece to the shape of the wings.
feelincrafty.wordpress.com Sew the wings along the outline, and then around each “bone”. Then sew on elastic bands so your child can put on the wings.
feelincrafty.wordpress.com The Toothless costume is ready. And the wings can be used for other costumes, for example, a bat.
If you are not confident in your abilities, order.
