home
beauty
Flowers from milk bottles. Flowers from plastic bottles: large daisies

Flowers from milk bottles. Flowers from plastic bottles: large daisies

26.07.2019

Daisies are one of my favorite flowers, I like them for their simplicity and at the same time they attract attention very much. The middle of a chamomile little sun, which radiates beauty around itself. When I make flowers from any materials, I don’t know why, but I want to make a daisy first. Chamomile is a very delicate and beautiful wildflower that many craftsmen love. Only at first glance, chamomile seems simple, but like any other flower it requires a lot of attention. To make the chamomile look like a living one, you must make an effort and try.
Dear friends, today I want to share with you a small master class on making chamomile from plastic bottles, I hope everything will be clear to you.

What you will need to make daisies from plastic bottles:

*Plastic bottles (Transparent and green.)
* Eyes for toys, can be purchased in the sewing department.
* Semolina.
* Any White paint.
* Marker.
* PVA glue.
* Scissors.
* Thermal gun.
* Acrylic artistic yellow paint.

Method for making chamomile:

We take a plastic bottle, cut off the neck and bottom from it, and we will use the middle. Make sure that the plastic bottle is even and without any bulges on it. We draw daisies on it with a marker. If you don’t know how to draw daisies, find some stencil on the Internet, print it out and trace it on the bottle. Below I will attach several stencils for those who cannot find anything. This is roughly what you should get.

It took me two flower blanks to make one daisy. Now we cut out our blanks. Here's what I got.

Now we need to make a rope from a plastic bottle to make a stem. Let's take a green bottle and use it to make a string for a stem. It is best to cut the bottle in a circle so that we have a long rope. Look at the rope I made from a plastic bottle...

Now we will make a stem from this rope. Let's take copper wire and we begin to wind our rope onto it, while I slightly heated it over a candle and quickly wound it onto the wire. Be careful not to get burned, there is no need to heat the rope too much.

Now the most interesting thing, we will make blanks for the middle of our flower; for this we will use ordinary store-bought eyes for making toys. The eyes need to be selected according to size so that they are not very large or very small. Instead of eyes, you can use buttons or any other suitable material.

We coat them with PVA glue and immediately, before the glue dries, dip them in semolina. The grain should lie evenly over all the eyes, making sure there are no gaps.

Now you need to wait until the eyes dry and then start painting them. I painted with acrylic paint yellow color, you can use the paint at your discretion.

Now we take the daisy blanks and paint them with white flowers, I had white aerosol paint from a spray can, you can also paint them with whatever paint you have. I painted the blanks twice so that there were no gaps. It is best, of course, to choose a plastic bottle white, then you won't need to paint it.

When the paint is dry, we begin to make our daisies. We glue the finished center of our flower onto the center of the flower with a heat gun. Then we connect the trunk and the chamomile itself to each other using a heat gun. The chamomile is almost ready, it still needs to make leaves.

We cut out leaves from a green bottle so that they look like real leaves like a chamomile. Lightly melt them over the candle, be very careful.

We take a heat gun and glue them to the stem. Chamomile made from plastic bottles is ready.

DESPITE the poor quality of the image, I hope you find my master class on making daisies useful, and I will also be glad for your feedback. THANK YOU.

And here are the promised templates for the chamomile.

Chamomile from a plastic bottle already used in the house - budget beauty! Handicraftsmen make countless flowers from plastic bottles. One of the beautiful and realistic flowers is the chamomile. Large daisies from bottles are made to decorate flower beds, front gardens, and summer cottages. And with small ones you can decorate the interior of an apartment or house, and you can also make a composition for a gift.

Below are step by step instructions making both small and large daisies.

Making small daisies from a plastic bottle with sharp petals

These little beauties of daisies look great in a bouquet on the windowsill in an apartment. You can also decorate a gift with these daisies or give them yourself.

To make these daisies you will need:

Small white bottles (for example, from the drink "Actimel")
Yellow lid
Wire

For one chamomile you need three bottles. The neck of the bottle is cut off, leaving a bend, from which future petals will bend beautifully. Next, the bottles are cut into strips along the entire length, not reaching the bottom 1 cm. Each strip must be sharpened with scissors and bent to the sides. Then you need to make slits or holes in the bottom. Through the slot, place all the petal blanks on the wire, the end of which must be clamped with a loop. Apply glue to the bottom of the first blank, so that the future chamomile falls down. Pour glue into the middle of the blanks and put on the lid. Spread the petals. The chamomile, made yourself from a plastic bottle, is ready.

Let's try to make a version of delicate daisies with rounded petals

These flowers can be used to decorate both the interior of the apartment and the area in front of the yard. The densely planted daisies in front of the house resemble a chamomile field.

For the craft you will need:

Clean plastic bottles (white, green, yellow)
Candle (lighter)
Scotch
Marker
White paper
Wire
Scissors, awl, compass, ruler, pliers

Petals.

Cut off the neck and bottom of the white bottle. Cut the bottle in half and lengthwise to create pieces of plastic. On a piece of white paper, using a compass, draw a round template, the size is adjusted to fit the pieces of plastic. Transfer the template to plastic and cut it out. Draw strips on plastic circles and cut, not reaching the middle 0.5-1 cm. Round the edges and bend them a little over the fire.

Leaves, sepals and stem.

Draw a leaf and sepal on white paper, cut it out and transfer it to a green bottle. Chop the leaves and sepals. Cut the rest of the bottle in a circle into a thin long strip. Wrap the strip around the wire and burn it a little over the fire.

Core.

Cut one convex part from the bottom of a yellow bottle and bend it slightly over the fire

All preparations are ready. The flower is easy to assemble: put the sepals on the wire, then the white petals, round the end of the wire with pliers and glue the yellow center on top. Glue the leaves to the stem as well. Ready!

The flowers come out in medium size and look beautiful in front gardens or flower beds.

Materials:

Three plastic white bottles
Yellow cap
Wire

Technique.

Cut the bottles in half at the expansion point. Cut off the necks of two bottles. Cut all the blanks into petals and round the edges. Insert two bottles alternately into a bottle with a neck, pierce it with an awl and insert a wire, secure with glue. Screw the cap onto the bottle with the neck. Straighten everything out. Chamomile made from plastic bottles!

These daisies turn out to be very large. They decorate personal plots, flower beds, and front gardens. You can see such flowers from afar.

Materials and tools:

Large white plastic bottles
Plastic plate
Strong wire
Candle or lighter
Scissors, knife, awl

Step-by-step instruction.

Cut off the necks and bottoms of the bottles. Cut lengthwise and cut petals from these blanks, shape them by slightly bending them over the fire. It’s better to take a yellow plastic plate; if you don’t have one, then you need to paint it first. Make holes on the edges of the plate with a knife and insert the prepared petals into them. From the inside of the plate, carefully burn the inserted edge of the petal with fire. This will prevent them from falling out. Make a hole in the middle of the plate and thread a wire through it, imitating the stem of a flower. Chamomile is ready!

From the same materials, everyone will get their own beautiful daisy, with its own special twist, which will definitely fit into either the interior of the apartment or the design of the garden plot. And the creation made with my own hands, will always please the eye.

Each master uses his own tricks for making daisies from plastic bottles, and some are willing to share them. You can learn a few little tricks from the video master classes:

Video on the topic of the article

There are several ways to make daisies from plastic bottles with your own hands, which do not require a lot of time and special skills. If you have all the materials at hand, you can very quickly decorate your garden or home.

Chamomiles made from plastic bottles will delight the eye both in early spring and late autumn.

Chamomiles from small bottles

If you have a lot of liquid yoghurt bottles, especially white ones, you can make neat and beautiful daisies. Each flower will take no more than 20 minutes to create. To form one chamomile you need to stock up on:

3 flat-bottomed yogurt bottles;
scissors;
glue for plastic of any brand;
wire;
knife;
rod;
a yellow cap or any bright plastic part for the middle of the flower.

To create daisies, use old and unnecessary milk bottles.

The first step is to cut off the neck, leaving a small bend, which will give the shape of the flowers more naturalness. Each bottle must be cut into two equal parts, leaving half a centimeter at the bottom. After this, you need to once again divide the parts in half, and then each of the resulting parts into 3 sections. By gradually cutting the bottle, you will be able to make the flower petals more even and beautiful.

The resulting petals must be made sharp on all bottles. After the petals have become correct form, you need to bend them, leaving the same half a centimeter near the bottom. Then you should make cuts in each bottom in the shape of a cross to thread the twig or wire. Glue should be applied between each layer. You can layer the layers on top of each other in different ways, and the shape of the flower will depend on this. When all the petals are glued, you need to make the middle. If there are images on the lid, acetone can easily remove them. The edges of the lid should be carefully coated with glue so that the flower remains beautiful for a long time. The twig will not be visible because of the lid. Then you need to let the glue dry and you can attach it outside.

Plastic daisies will remain beautiful at any time of the year, and they can be easily moved from one place to another if necessary.

Twisty daisies

The petals should look round, so trim them as nicely as possible.

To make the daisies look more natural, it is necessary to give the material some tortuosity and unevenness. This can be done using an ordinary candle. To make these options you will need:

white, green and orange plastic bottles;
candle;
scissors;
awl;
old wire or wire;
paper for stencils.

Making this chamomile will take about 15 minutes. First of all, you need to make a paper stencil in the shape of a circle. Then you can easily cut out circles from a white plastic bottle using it, you can make 3 layers at the petals. Each circle is cut into 4 parts so that the center remains intact, then each of the parts is divided into several more until the parts look like petals. The resulting petals must be made rounded at the ends. Each piece should be carefully held over a candle flame to give it a sinuous shape. There is no need to distort the surface too much, otherwise it will only vaguely resemble a daisy.

After the base, you need to make the center of the flower by cutting out round parts from an orange or yellow bottle. A candle will also help give the resulting centers a natural shape. From one center you need to cut out a small segment.

To create star-shaped sepals, you need a green bottle.

Next, you will need a green bottle, from which you need to cut out the sepals in the shape of stars, and then hold them over the candle, like the previous parts. To thread the wire into the sepal, you need to pierce the latter with an awl. On top of the stars you need to attach the white bases of the flowers.

The middle of the flower with the missing segment will help hide the wire; to do this, you need to connect the parts of the middle above it. To make leaves we will need a paper stencil. The shape of the leaves can be anything, but not too complex, otherwise, when processed with a candle, its edges may stick together. Leaf cuttings should not be held above the flame; they should remain straight. Attaching such leaves to the stem is very simple, you just need to wrap them around it and heat it.

If you make whole bouquet such daisies, it will decorate any flower bed or lawn.

Big daisies

Often you want to decorate an area with rather voluminous flowers; large plastic bottles will help with this. Large flowers look very impressive among natural greenery and do not get lost among other parts of the landscape. To make these daisies you will need:

The daisy trunk can be made from iron wire and a green bottle.

plastic milk or kefir bottles;
green bottle;
scissors;
knife;
yellow boxes of chocolate eggs;
iron rod;
White paint.

If there are no white bottles available, then help will come white spray paint. For one flower you will need three bottles. They need to be cut into two parts, only the upper one should be used. The necks should be left on only one of the 3 parts received. From edge to neck, cut out chamomile petals, which should be relatively smooth and rounded at the edges. Each petal needs to be cut a little to the end. The neck piece will be used as a base onto which the other two pieces should be secured. This way you can make three-layer petals that need to be folded back to form a flower. Instead of the middle, you can use a regular yellow cap or a cap from a box made of chocolate egg, attaching it with wire.

The stem of the daisy can be made from iron wire or rod, which will look more natural if you wrap it in a spiral cut from a green bottle and then heat it.

Such a chamomile will be very stable and strong, despite its big size. You can decorate your garden with one of these large flower or make a whole lawn. Some people use bottles of different colors to spice up their landscape, but it's important to maintain consistency when using different colored paints.

Elegant daisies

To make an elegant chamomile, you only need scissors and two-liter bottles.

Daisies made from brown plastic bottles look very beautiful. To make such a flower, you only need scissors and two-liter bottles. For the base, only the top part of the bottle with the neck is used, which is cut into 8 identical petals. The edges of the petals should be round and even. Next, you need to bend each petal so that the blank looks like a real chamomile.

Next, you need to make the middle of the flower, which is made from the middle part of the bottle. The middle of the bottle needs to be cut lengthwise into two equal parts, each of which can become a beautiful center. The resulting parts must be finely cut crosswise in the form of a fringe, and then fasten the edges. The result will be a very unusual and beautiful middle. Flowers with white petals and dark stamens look especially impressive, which can be achieved using spray paint.

Such daisies are attached without a stem to different surfaces, they can decorate a porch, yard, flower bed, trees or benches.

You can make daisies from the bottoms of colored bottles. This method is the fastest and easiest. To do this, you need to cut the bottom evenly and make a hole in it using an awl or a heated nail. The shape of the petals can be absolutely any, the main thing is that it looks beautiful. You can stack several bottoms on top of each other to make the petals appear lush.

The middle of the flower can be made using a cap from a chocolate egg box. It should be cut into as many strips as possible, leaving the middle intact. Then you can hold the edges of these strips over the candle, they will be unusually rounded and will look very elegant. You can leave these daisies without a stem or make one from any wire or even a nail that can be wrapped in green plastic or painted.

There are many ways to make daisies using ordinary plastic bottles, and making several beautiful flowers does not take much time, effort or money.

The process of making chamomile from plastic bottles is very simple. The work will require a minimum of materials and tools and very little time. From a bottle you can make flowers of various shapes and sizes: small or large, lush, with sharp or rounded petals. You can even use plastic spoons for their manufacture. This product will not wither, unlike real chamomile, and will delight you with its appearance all year round.

Show all

Chamomile with large petals

The simplest option, suitable for beginners. To work you will need:

liter white plastic bottles for milk or kefir;
covers from them (orange or yellow);
craft wire with a diameter of 4 mm;
awl;
green tape (for the stem);
pencil;
sharpened scissors.

Step-by-step instruction:

1 The bottle is pierced with an awl in the place where it begins to expand. Insert scissors into the hole and cut off the top part. The cut line should be straight and parallel to the bottom.
2 They do the same with other bottles, but they also cut off the neck (the part on which the cap is screwed on).

3. Each workpiece is marked: draw lines parallel to each other with a pencil from the neck to the bottom. These are future petals. They can be made wide or narrow, like a real chamomile.

4. Using scissors, cut the plastic along the marked lines. The cuts should end at a small (several cm) distance from the top of the workpiece, otherwise the entire structure will fall apart.

5. Give petals the required form at the ends - the wide ones are rounded, the narrow ones are made sharp.

6. The first piece (with the neck) is placed on the table, the rest are put on it.

7. They begin to unbend the petals so that the flower opens.

8. Screw the lid onto the neck. It will simultaneously serve as the center of the daisy and hold the entire structure.

9. Use an awl to pierce the lid in two places. The holes are needed to insert the wire into them.

10. Cut a piece from a coil of wire 2 times longer than the future stem. Fold in half. Both ends are inserted into the holes on the lid.

11. Pull both pieces of wire from the bottom of the lid. Connect both parts by twisting them together.

12. Tape is wrapped around the resulting trunk.

The product is ready. Having collected several of these flowers, you can stick them into the ground in a flower bed.

If you take small 100 ml bottles instead of a liter bottle, then with the help of this master class you can make elegant small daisies.

Flat daisy

The process of making such a flower with your own hands is a little more complicated, but the resulting chamomile with sepals and leaves can decorate not only the garden, but also the house.

Result

To work you need to prepare:

plastic bottles in green, white and yellow colors;
glue gun;
wire 0.2 and 4 mm;
a candle with matches or a lighter;
pencil;
awl;
scissors;
scotch;
ruler;
paper;
pliers;
compass.

The process consists of 4 steps: first the petals are made, then the stem and leaves, then the core, and at the end all the parts are assembled into a single structure.

Petals

They are made from a white bottle.

Making petals

The bottom and neck are cut off from it. Draw a line along the ruler with a marker from one cut point to another. On the opposite side they draw another one of the same kind. Cut with scissors. You should end up with 2 equal halves.

Draw a flower template on a leaf: draw a circle with a compass. The size of the flower depends on the diameter of this circle. Cut out a blank from paper and apply it to half of a plastic bottle. Trace with a pencil. Cut out a circle.

Now you need to make the petals. To ensure that they are identical and even, it is better to first mark the workpiece with a pencil - draw lines from the edge to the middle, not reaching the center a few centimeters.

Formation of petals

Cut with scissors and round off the ends of the petals.

Blank for a flower

The ends are brought to the fire of candles or lighters so that they melt a little and bend.

Changing the shape of the petals

The second piece is made in the same way.

Stem and leaves

Draw a leaf and a sepal on paper and cut them out.

A green plastic bottle is cut in half. One part is divided in the same way as the white part. Apply a leaf and sepal template to the resulting sheet of plastic and cut it out.

The other part of the bottle is cut in a spiral to create a thin strip.

Leaflets

Stem wrapping tape

A piece is cut from a coil of wire to make a stem. The leaves are attached with a thin wire (0.2 mm in diameter) to the stem. Wrap it with plastic tape. The ends are secured by holding them over the fire.

Core

To make the center of the flower, take a yellow bottle. The bottom is cut off from it.

At the bottom there is usually a bulge in the center, this is the part that is needed. Carefully cut it out in a circle.

Assembly

The parts are connected using glue gun. First, 2 blanks with petals are glued together, and the yellow center is fixed in the center of the top one.

Flower assembly

When the glue hardens, a sepal is attached to the bottom. This structure is connected to the stem. The flower is ready.

Small daisies

To work you will need:

white plastic bottles;
green drinking straws;
glue gun;
several yellow lids from small plastic containers;
pencil;
scissors.

Materials for work

Procedure:

1 At the bottom of the bottle, at a distance of several cm from the bottom, draw a line in a circle.
2 Use scissors to cut the container along the drawn line. For flowers you will only need the part with the bottom.
3 Draw petals on the blank with a pencil - from the cut point to the center. Cut with scissors.

4. Using a gun, glue the yellow caps in the center of the bottom. The workpiece must be held so that the petals are directed downward.

5. Turning the flower over, glue the stem (green tube) to the center of the workpiece with a gun.

6. Several tubes are cut lengthwise, straightened and leaves are cut out of them. Glue it to the stem with a gun.

From one plastic bottle you can make blanks for two different daisies - use the bottom for the last master class, and make a flower with large petals from the part with the neck.

DIY daisies. Master class with step-by-step photos

“Chamomile bouquet” from a plastic bottle and disposable cups. Master class with step-by-step photos

Master class is designed for children school age, teachers, parents and lovers of everything simple and original.
Target: Making a vase with flowers.
Tasks: Develop creative abilities.
Aesthetic perception.
Fine hand motor skills.
Cultivate artistic taste. Accuracy.
Purpose: Can be a holiday gift, interior decoration, or a napkin cup.
Material used: Green plastic bottle, white disposable cups, yellow plasticine, scissors, knife, backing.

Chamomile, a widespread medicinal plant, is very loved by people not only for its well-known medicinal properties- since ancient times, people used to tell fortunes on the petals of this plant, confiding heart secrets to it. “He loves - he doesn’t love, he’ll press you to the heart - he’ll tell you to go to hell,” this is about a chamomile. From Greek, the name of chamomile is translated into Russian as “ White flower" In our area, about 50 species of chamomile are known (and there are more than three hundred species in total), but people often confuse and call almost all flowers with white petals by this name - navel, pyrethrum, cornflower or popovnik. There are also garden and ornamental species - sometimes you won’t even guess that this is also a chamomile. Chamomile is considered the most useful; fragrant chamomile is also used in medicine.
White basket,
Golden bottom.
There is a dewdrop in it
And the sun sparkles.
We'll take her home
And we'll put it on the table.
If we suddenly fall ill -
We'll brew it. 1. Material used to make the craft.

different sides

plastic cups