I would like to introduce you to the cockerel Petrunya.
Not a single yard in a village or village can do without this magnificent bird. So I made myself a friend, a bright and majestic owner of the yard!
I will be happy to share with you the stages of its manufacture (based on the idea of making birds from plastic bottles Alena Zinovieva).
To make a mold, we need:
1) 5l. canister (I use from under liquid soap),
2) 5L plastic bottle,
3) metal-plastic pipe (height of legs is about 30-35 cm),
4) two 1.5l. plastic bottles for "thighs",
5) self-tapping screws, scissors, stationery knife, screwdriver.
For fastenings, I use these self-tapping screws (I buy by weight in hardware stores).
Small (about 1.5-1.6 cm) - for attaching feathers and component parts to each other.
Large (about 5-6 cm) - for attaching the head to the neck.
1) Move the top of the canister about 3cm.
2) We bend the metal-plastic pipe (we give the shape of the legs), in my case - the rooster is walking ( right leg pushed forward), and fasten it with screws to the canister.
3) For the neck, from 5l. bottles, fold the envelope, fasten it to the canister with screws.
4) From 1.5 l bottles we cut out two "thighs", which we attach to the canister with self-tapping screws.
For feathers, I used bottles like this. We cut off a long neck, cut the bottle into 5 feathers (we focus on the protrusions on the bottom of the bottle), use the upper part of the feathers.
We begin to close the body with the "thighs". Detach them from the canister for convenience.
1) attach the corrugated tube to the neck of the bottle,
2) attach the feathers with wire.
We attach the finished legs back to the canister.
Starting from the back, we close the entire body, except for the back, with feathers (we fasten it to the canister with screws). We leave the back of the neck open, because there will be other feathers.
The next step is to start making paws. From copper wire 2.5 mm (or any other, preferably rigid, but not steel, which bends), we bend the shape of the paws (for more details, see MK Filin). From the corrugated tube we create the effect of paws. The left tail is inserted between the metal-plastic pipe and the corrugated tube. From below, you can still pour glue for strength.
Cut out claws from the bottom of the bottle (photo). They should be narrow and long. We fix them with glue (I use "Installation Moment - Liquid Nails").
We paint the torso and legs with spray paint (I use universal enamel from the KUDO company).
We cut out the head from construction foam using a clerical knife, it is very sharp and the cuts are even, not torn. If the cutting process seems complicated to you - cut out all the details separately! Then they can be glued together.
With the help of sandpaper (medium) we bring to the shape we need.
We process the surface with acrylic putty, wait for complete drying and once again skin it to smoothness. After that, we process it with ordinary PVA glue, so the paint fits very well.
We begin to paint the head (you can use acrylic paints, it's more convenient). Glue the eyes (bought in a fabric store).
After fitting the head to the body, the husband said that the comb turned out not to be a rooster, but more suitable for a chicken. Decided to redo. I made a pattern out of paper (I tried it on for a long time so that it was larger). I transferred it to the foam, cut it out and glued it in place of the former.
With the help of wire, we begin to fasten the long feathers of the wing. The back stays open.
I close the top of the wings with such feathers from corrugated 1.5 liters. bottles. The last row goes to the bend, into the inside of the wing.
We paint with paint, let it dry well and attach it with perforated tape (sold at any hardware store) and self-tapping screws to the body. We bend the net for attaching the tail (you can increase its length and the tail will turn out to be richer).
Let's start making the tail.
We cut feathers from 2l or 2.5l. bottles in 5 parts. We paint separately on both sides (at first I applied black, after drying a little blue)
We attach to the grid with a wire. After coloring, I cut the feathers in half again, so the tail turned out to be more magnificent.
For the feathers on the back, I cut the feathers different lengths, from transparent bottles (it's easier to color yellow), about 2-2.5 cm wide. Attached to the back with self-tapping screws, 3-4 pieces at once.
Helpful Hints
Often, when we go to nature and have a picnic, we take plastic spoons with us.
After that, as a rule, there are still many such spoons left, and they are stored in a locker for a long time.
Do not throw away plastic spoons. Even more than that, buy a few more spoons so that you can make a beautiful craft or even a few crafts.
Here are a few interesting crafts which can be easily made using plastic spoons:
1. Plastic Spoon Crafts: Decorate your kitchen wall
You can use both plastic spoons and stainless steel spoons (as in this example), but it is much cheaper and more logical to use plastic ones.
You will need:
spoons
acrylic paint
tassel
Glue (superglue)
Wooden tablet.
2. Create a beautiful DIY flower vase from plastic spoons.
You will need:
Can
plastic spoons
Scissors
Acrylic or spray paint (optional)
Tassel.
1. Cook tin can. You can color it.
2. Use scissors to cut off the top of each plastic spoon.
* It is advisable to first determine how many rows of spoons will cover the jar and how many spoons in each row. In this example, 8 rows of 15 spoons.
* If you want to paint the spoons, then put them on a flat surface, prepare the paint and come up with the color you need for the future vase.
* In case you use spray paint, paint outdoors and preferably in a protective mask.
* You can combine paints - one row of one color, the other - another.
3. When the spoons are ready, think about which way they will look, and start gluing them to the jar.
Here is what should happen in the end:
3. Crafts from disposable spoons: clock in the shape of the sun
You will need:
Plastic spoons (in this example, there are 250 of them)
Scissors
Super glue or hot glue gun
Styrofoam
A watch, photograph, small mirror, or other interesting item
Bolts and screwdriver
Stationery knife.
1. Cut out a circle from the foam. In this example, the diameter of the circle is 45 cm, but you can make a circle of any size.
You can cut with a utility knife.
2. Find the center of the circle and mark it in order to attach a photo, mirror or other object. Need to cut a hole for the clock right size to change batteries, wind clocks, etc.
3. Cut off the tops of the spoons with scissors.
4. Start carefully gluing the spoons in a circle, completely covering the foam. It is worth starting from the edge of the circle and, gluing in rows, move to the center of the circle.
* If desired, you can paint the spoons. Use spray paint, but you need to paint outdoors or in a well-ventilated area (garage, open balcony).
* In this example, I had to add a couple of Styrofoam squares to attach the clock to the Styrofoam.
* Instead of a clock, you can stick any photo, picture or small mirror.
4. How to make a Christmas tree from plastic spoons
You will need:
Plastic spoons (in this example, there are 100 of them)
Super glue or hot glue
Scissors
Acrylic or spray paint
tassel
1. Cut off the top of the spoons with scissors.
2. Start gluing the spoons to the cone, starting from the bottom. Glue in a checkerboard pattern and continue to the very top.
3. Paint the Christmas tree in any color. You can use acrylic or spray paint. You can also leave a Christmas tree white color or use spoons that were already painted when you bought them.
5. Spoon Crafts: Garden Labels
You will need:
Plastic spoons (in this example 4 pieces)
acrylic paint
tassel
Sandpaper
tassel
Toothpick (optional)
black marker
1. Treat each spoon with sandpaper to remove shine.
2. Paint each spoon in a certain color, leaving 4-5 cm below unpainted, because. spoons will be in the ground.
3. When the paint has dried, write with a marker on each spoon the name of the flower plant you need, etc.
3. Using a toothpick and paint, you can apply dot patterns on a spoon - if desired.
4. Let the paint dry before using your labels.
6. Garland of spring flowers and other flowers from plastic spoons.
You will need:
Multi-colored plastic spoons (pink and blue in this example)
Thick cardboard or fiberboard
Acrylic or spray paint
tassel
Pompoms (you can buy or make your own)
Super glue or hot glue gun
Thick thread.
1. Prepare cardboard or fiberboard and cut out three identical triangles. You can color each triangle if you like.
2. Cut off the top of each spoon - these are the future petals of your flower. This can be done with scissors or by heating the knife so that it smoothly cuts through the plastic - this method is dangerous, so it's best to have an adult handle this step.
3. For one flower you will need 6 spoons, and in total there are 3 flowers in a garland. Mark the middle on each triangle and start gluing plastic petals in a circle.
4. Glue one pom-pom into the center of each flower.
5. Make two holes in each triangle and pass a thick thread through them to end up with a garland.
7. What can be made from spoons: musical instrument maracas
You will need:
The plastic egg or box that was inside the chocolate egg
2 plastic spoons
Tape or washi tape
1. Fill a plastic egg with some rice and close it. You can add different amounts of rice for different sounds.
create beautiful and original products can be made from almost any material. The main thing for this is the desire to create beauty with your own hands.
Ordinary plastic spoons are perfect for home creativity. From standard and unremarkable items of disposable tableware, you can make bright, interesting, creative compositions.
This an exciting activity will appeal to both adults and children.
What can be made from spoons
We invite everyone who wants to please themselves and their loved ones with the results of their creativity to the master class "Crafts from spoons".
You will see step by step the whole process of forming crafts from plastic spoons.
tulips
In order to make a charming bouquet of tulips, we need:
- spoons (5 pieces for each flower);
- colored corrugated paper;
- glue with a brush;
- scissors;
- green tape.
Cut out squares from red paper. We wrap spoons in each square and glue it.
Then we collect the tulip. To do this, we fasten 2 spoons, add 3 more to them and fix the resulting flower with electrical tape. Cut out leaves from green paper, attach to the stem and tie with ribbon.
We make a bouquet and put it in a beautiful vase.
Water lily
For creating plastic water lily you need to prepare:
- spoons of different sizes
- glue gun;
- ordinary glue;
- paints;
- scissors;
- green plastic bottle.
After cutting off the handles of the spoons, fasten the future petals with glue gun. You should end up with an inner layer of petals.
Make the outer layer of the flower in the same way. Cut a 12x3 cm strip from the bottle and make a fringe along one of its edges. Roll up the strip and fix it with glue.
Dye the fringe in yellow and let it dry.
Make leaves from the bottle, as shown in the photo.
Attach the dried strip to the petals from the inside - this will be the middle of the flower. Gorgeous snow-white water lily is ready!
flower garland
A bright flower garland will look very impressive, for the manufacture of which you will need:
- 18 multi-colored spoons;
- scissors;
- glue;
- thick thread;
- dye;
- pompoms;
- thick cardboard.
Cut out 3 triangles of the same size from cardboard and color them.
Note!
Cut off the handles of the spoons. Mark the middle in the triangles and stick petals around it (6 pieces per flower). Place a pom-pom in the center of each flower.
Make 2 holes in each triangle and thread a thread through them, thus connecting the flowers into a garland.
flower vase
Making a pretty vase for flowers will require you to have:
- spoons;
- tin cans;
- scissors;
- glue;
- paints.
Paint the jar in your favorite color. Cut off the handles of the spoons. Paint in desired colors rounded spoons.
Glue the spoons to the jar, placing them in even rows.
Note!
ladybugs
Make a cute spoon ladybug you can with:
- spoons;
- glue;
- large voluminous buttons;
- paints;
- scissors.
After cutting off the handles of the spoons, paint the oval part of each of them. Glue the wings together. Attach a head button at the top.
Candlestick
To create a sterile original candlestick, you only need the spoons themselves and glue.
By gluing the spoons as shown in the photo, and attaching a candle to the top of the structure, you will get stylish element decor that will decorate any holiday.
decorative frame
You can also use disposable spoons to create original frames that decorate various items interior.
Note!
For this you will need:
- spoons in large quantities;
- scissors;
- glue;
- polystyrene or thick cardboard;
- a watch, a small round mirror, a photograph, or another item of value to you.
After measuring the diameter of the desired object, cut out a circle of the appropriate size in cardboard or foam.
Place a clock, photo or mirror in the resulting frame and secure it. Cut off the handles of the spoons. Glue the rounded parts of the spoons to the frame in rows in a circle, from the edge to the center.
Color the finished fruit of your creativity the way you want.
Christmas tree
Among crafts from disposable spoons, picturesque Christmas trees are very popular, for the manufacture of which you will need:
- paper cone;
- glue;
- scissors;
- dye.
We cut, as usual, spoons into 2 parts;
We glue the oval part of the spoons to the cone in a checkerboard pattern.
We paint the resulting Christmas tree in any color or leave it white and admire our creation.
Maracas (musical instrument)
Creating this unusual tool will take you quite a bit of time, but is guaranteed to delight your children.
Prepare the following materials for this:
- 2 spoons;
- plastic egg;
- scotch;
Place in an egg a small amount of rice and close.
Pinch the sides of the egg with spoons.
Tape the resulting model with tape.
Pumpkin
To make a large bright pumpkin out of spoons, you need to cook:
- spoons of yellow or orange in large quantities;
- foam ball.
Cut off the handles from the spoons.
Attach the rounded part of the spoons to the ball in a checkerboard pattern from the bottom up.
The top of the resulting pumpkin can be decorated with a small branch.
The process of creating all the described compositions is reflected in the photo of crafts from spoons. We talked about the most popular and beautiful products made from this material and shared secrets on how to make crafts from spoons with your own hands.
We hope that our master class has been useful and aesthetically pleasing to you.
Photo of crafts from spoons
The symbol of the new year 2017 is the rooster, and it should be in every home. It will not only decorate the room, but will additionally serve a good gift for relatives and friends. Toddlers are encouraged to do this simple craft from disposable plastic spoons - a cockerel and his girlfriend a chicken.
To do this, we need the most common materials:
plastic spoons,
cotton pads,
White and red paper
black marker,
Yellow napkins (2 pcs.),
bow for decoration,
So, first we will make a cockerel. We take a yellow napkin and glue it, wrapping it tightly around our spoon so that it fits exactly to the wide part (the head of the cockerel).
We fold the second yellow napkin in half with a triangle and string it on a spoon. At the base, also fix with glue.
Draw eyes with a black felt-tip pen or marker, glue the "scallop" and "beak" cut out of red paper. The cockerel can be decorated with a bow.
To make a chicken, we cut out the wings by folding a sheet of paper in half, a bow, a beak, a crest.
We put a spoon on a cotton pad and a blank of wings, glue it, glue another cotton pad on top.
We draw the chicken's eyes, glue the crest and beak, a bow. You can decorate with "buttons" of shiny glue.
VIDEO TIPS
Sokolova Maria Vladimirovna, methodologist of the Center for Games and Toys, candidate of psychological sciences, talks about what parents should pay attention to when choosing vehicles. How many cars a child should have, what they should be, see our video tutorial.
Elena Olegovna Smirnova, founder and head of the Center "Games and Toys" of Moscow State Pedagogical University, Professor, Doctor of Psychology, talks about what toys a child needs in the third year of life. During this period, toys of the second year of life remain relevant, but they become more complicated, and new ones appear for development. children's experimentation and the origin of the game.
Elena Olegovna Smirnova, founder and head of the Center "Games and Toys" of the Moscow State Pedagogical University, Professor, Doctor of Psychology, talks about what toys a child aged 6 to 12 months needs in terms of their developmental effect.
Elena Olegovna Smirnova, founder and head of the Center "Games and Toys" of the Moscow State Pedagogical University, Professor, Doctor of Psychology, talks about what other toys a child needs in the second year of life: features of inserts, pyramids, the beginning of objective activity and experimentation
The child is one year old and completely new toys appear in his life. Elena Olegovna Smirnova, founder and head of the Center "Games and Toys" of the Moscow State Pedagogical University, Professor, Doctor of Psychology, talks about what toys a baby needs after a year when he begins to walk and master various objective actions.
Making a rooster from plastic bottles with your own hands is easy, step-by-step instruction is proof of that. The first version of the craft is perfect for working with kids, and the resulting souvenir will look great at home or on the site. The second craft from this material is already a more complex craft, requiring certain additional materials and knowledge.
Now you can start making paws, for which you need copper wire. It is necessary to bend the shape of the paws, and then create the desired effect from the corrugated tube. Insert the tail between the two tubes and, for strength, fix everything with glue. Cut out the claws from the bottom of the bottle, they must be long and narrow, attach using glue. Using a can of paint, paint the existing parts of the cockerel.
While the torso with legs dries, you can start creating the head. First, it should be cut out of foam using a stationery leg. Cuts should be sharp, but in no case torn. If it is difficult to cut the head right away, you can cut out its parts separately, and then fasten it with glue. Sandpaper will help remove bumps, and then treat the surface with acrylic lubricant. Then apply a layer of ordinary glue and, when it is completely dry, paint the bird's head acrylic paints, make eyes.
Now try on the head to the body. Prepare the form for the wings and attach the long wings to the back, while leaving it open. Color everything, make a tail. To do this, cut long feathers from a two-liter bottle, paint them on both sides and attach to the body, again using wire. To finish the feathers on the back, cut 2 cm short feathers from the bottles, attach them to the back, you will need self-tapping screws for this.
Step-by-step instructions one or two will help you make a rooster out of plastic bottles with your own hands. The first version of the craft is easy, requires a minimum of source materials, and such a cockerel can be made even with kids. The second bird is large, serious and delightful appearance. If you want to build it, it should also work without any special problems. Simple and quick craft -
