Tattoo choker- This is an unusual type of decoration, as it creates the appearance of a tattoo on the human body. The material that is used to create a choker is ordinary fishing line or elastic thread, which can be bought in the store at a very low price. Creating such a decoration with your own hands will not take you much time and effort, so let’s learn how to make a choker together.
What can a choker be made from?
Many people wonder what a choker should be made of, and we have the answer to this question. The main task is to choose the right material for the choker. This can be a fishing line, or a special elastic-stretchy spandex fishing line. Of course, spandex will be easier to work with and will look better, but if you have a lot of fishing line lying around at home, then why waste money? It is advisable that the fishing line be black, so it will look more attractive.
How to make a choker around your neck?
To create a choker we will need:
Lighter
Beads (optional)
These materials are not difficult to find on store shelves, and they will cost just a few pennies. Having prepared everything, we can begin.
1. We cut the fishing line 2.5 meters long. We bend it in half. To make it more convenient to make a choker, it is better to attach the clip to some book or board.
2. We insert the bend of the fishing line under the clamp, thereby fixing it. Next, take the left part of the fishing line and lay it on top of the right one.
3. Now, we push the end of the right part of the fishing line back under the right part (as shown in the photo).
This is the kind of loop we should get:
4. Now we pull this loop to the very top.
5. The next step is to take the left side of the fishing line and lay it down on the right side.
6. And again we make a loop, we put the left end of the fishing line under the left part.
7. Pull the loop up again.
8. We continue weaving, thus first making a loop with the right part of the fishing line, then with the left.
9 . At the request of the creator, you can decorate the choker with beads, stringing them on a fishing line from time to time.
10. We braid the choker to the length we need, then cut off the excess edges.
Few pieces of jewelry are ready to compete in popularity with a choker. Its triumphant return in the 90s of the last century simply captivated the minds of ordinary girls and cool designers. Then there was a slight lull. And for several years now, decoration has been modified, improved, and appears in new forms and materials.
The choker fits tightly around the neck. Perhaps this is its only characteristic by which the accessory can be attributed specifically to chokers.
Women, out of habit, borrowed this decoration from men (just like trousers or). But the female version has become more refined and skillful. Soon, lace chokers and charming choker necklaces appeared.
Then came the high point of the stylish “collar”; wearing it was cool and fashionable. It was a kind of tradition that denoted belonging to the modern movement. The super popular considered choker tattoos part of their style and lifestyle.
But, unfortunately, it was difficult to buy it in stores. It took a long search to find it. But smart girls learned how to make a choker themselves. Today, purchasing an accessory in online stores is not particularly difficult, but we will tell you how to make a choker for your neck with your own hands . It's much more interesting. The accessory will be original, one of a kind. It will keep your hands warm and display your own style.
See detailed and clear step-by-step manufacturing instructions with photos in the next part of the article.
How to make a choker?
What can you make a choker from at home? These can be different materials.
Choker made of fishing line
Choose thick fishing line of any color. The most noticeable thing around the neck will be a black choker. To be different from your girlfriends, you can weave a white, colored, pink, blue, or rainbow “collar.” Often one or more pendants, beads, or stones are added to it. In this article we will teach you how to weave a choker from fishing line yourself. Photos of each stage are attached. Manufacturing will take you very little time. 
spandex choker
A thin, elastic, stretchable, durable thread is an excellent material for weaving an accessory. The thread is pliable, durable, and has a long service life. It can be found at a craft store. 
Choker made of rubber bands
Even children are interested in weaving from colored rubber bands. The pattern for making the jewelry is simple and very interesting. Video instructions and step by step diagram executions with photos have already been published on the website. If you have all the materials in stock, then quickly proceed to production. 
If the headphones are out of order, but externally they do not have scratches or other minor damage, then you can give them new life, making them into a necklace. There should be no problems with weaving a choker - the pattern used is the same as for a “collar” made of fishing line. But making the fasteners is a little more difficult. But even here the site’s experts will come to your aid. A separate publication presents a master class on making a choker from headphones and your choice!
Choker from charger
If the broken charger has a thin wire, then it can also be used. Realistically estimate the thickness of the wire and its length. In a word, experiment!
Ribbon choker
A satin or velvet ribbon around the neck looks very feminine and stylish. You need to know what style of clothing to combine it with. You can attach a small pendant to it.
Detailed instructions with photos on how to make them yourself are on our website! Film stars, singers, socialites They are happy to wear it with their fashionable outfits! who adore the choker, published by experts! Check out the gallery of the most interesting photos!
Beaded choker
An elegant option that goes well with festive dresses. A beaded choker is a real work of art, it’s not easy to make! Exquisite Sophisticated the shape will fit for evening dresses. 
Lace choker
The elegant decoration was chosen by both young girls and adult women. For young beauties it looks like a lace ribbon. Ladies with a certain status in society choose wider embossed lace. Read the secrets of creation on our website.
We have listed the types of chokers that you can make with your own hands if you have a great desire and a little skill. See absolutely all existing options in the recent publication.
How to weave a choker tattoo from fishing line
The most common and inexpensive option is to weave a choker from fishing line. First, practice how to weave a choker from pieces of old fishing line to determine exactly the required thickness, length and color of the material. The most popular and simple pattern for weaving a choker is shown in the figure. The decoration was created using this technology. It is easy to put on your head, as the loops stretch and return to their original shape at the neck. 
For the master class we chose multi-colored fishing line. We will make the decoration as in the photo! 
Our material is less rich color, but good for training! 
The thickness of our fishing line is not enough for the choker to look beautiful. Therefore, we folded it in half so that the colors matched along the entire length. We needed about 4 meters of multi-colored fishing line. The material was secured to a hook. You can secure the fishing line with a clothespin or ask a friend to hold it. 
Loop one end of the line around the other and pull tight. 
After this, make a loop with the other end of the fishing line. Pull the threads more when weaving so that counter knots are created at the same distance from each other. 
Using the same pattern, weave a choker of the required length. Take turns making loops with different ends of the fishing line.
In this article we will talk about how to make a choker with your own hands; a photo of the finished neck decoration can be easily found on any fashion online blog. After all, every girl dreams of a large and stylish collection of jewelry. Of course, some people prefer exclusively precious metals and products made from them.
But it’s always interesting to try something new and unusual. And what is created with one’s own hand will always be exclusive. In addition, such a necklace will be able to reflect your individuality and emphasize your unique style and character. We will discuss the origin of the fashionable “collar”, its types and how to make it on your own in more detail.
What it is
First, let's figure out what it is:
- A necklace around the neck (less commonly, a bracelet on the wrist);
- Made from the finest threads or wires;
- Fits tightly to the place where it is put on;
- From a distance it looks like a tattoo.
By the way, because of how tightly it grips its owner, it is also called a “noose.” Probably, many will remember velvet ribbons with a pendant or cameo around the neck, which were so popular in the already distant 90s. We can say that this was the prototype of the current version of the decoration. And recently the fashion product has been remembered again.
Direct translation from English means “strangler”, but according to appearance is a decorative collar that can be made from various materials: from wire to lace. Despite its rather terrifying names, of course, it in no way squeezes its owner.
Advice!Before you start creating it, create a sketch or just some sketch, an idea, and stock up on everything you need.
Finding a worthwhile or suitable choker on sale that meets all your wishes is not so easy. That’s why they often make them themselves, especially since there is nothing complicated about it.
History of appearance
The decoration came to us from the ancient Indians, who used it as a talisman when they went into battle. And initially it was a male attribute. Made from natural materials, protected from evil spirits.
By the way, even now the strong half of humanity sometimes wears its analogues: minimalistic and severe, without any decoration, more like a cord. Women did not stand aside and adopted the style of wearing this accessory from their husbands, adding all sorts of decorating details to it.
Advice! Sometimes worn as a set with a bracelet on the wrist or elbow.
He experienced three waves of popularity:
- Middle Ages in Europe;
- The 90s of the 20th century were a real boom that captivated fashionistas of all ages;
- Return to trend – 2014.
And since then it has remained at the peak of popularity, and its varieties and stylistic directions are becoming more and more numerous.
What they looked like and what they were made of
As we found out, the accessory has been known and has found its admirers for many centuries. At different times they were made from:
- Gold;
- Silver;
- Platinum;
- Velvet;
- Lace;
- Atlas.
Moreover, inlays or stone pendants were often added to precious metals. Modern ones are made from:
- chains;
- fishing lines;
- wires;
- colored rubber bands;
- floss thread;
- beads;
- artificial pearls;
- metal
Advice! Traditional materials are still in fashion, and therefore lovers of the classics should take a closer look at the assortment of jewelry stores.
Decorate the “strangler”:
- bugles;
- pieces of fur;
- artificial flowers;
- pendants;
- cameos.
Advice! If you like “tattoos” with pendants, to make them more original, make them asymmetrical and of varying lengths.
Modern “nooses” can be either with or without a clasp. There are models of two different halves, which are combined into one at the neck. And also those that do not need a lock, since they are made of materials that rigidly hold their shape.
DIY from tape
The more you look at photos on the Internet, the more you understand: doing it yourself is quite simple! One suitable for beginners in the field of decorating. The technique is not complicated, so after 5 minutes you will have a fashionable “collar” on your neck. You will need:
- Velvet, satin or rapeseed ribbon of the width you plan for the product itself.
- A special clip, button or buckle.
- Centimeter.
- Pliers.
- Threads, needle.
- An awl, seam ripper or nail scissors.
Ideal colors:
- black;
- white;
- Navy blue;
- dark green;
- Bordeaux;
- wine.
Advice! Do not choose a base that is too wide, otherwise the neck will appear too short.
The procedure is as follows:
- determine the girth of the neck to cut off the part;
- do not forget to leave allowances to sew on the lock;
- to create a hole for the pendant, use a special ripper, an awl or nail scissors;
- fold in half, mark the middle, make a hole;
- insert the pendant, use pliers to tighten the ring securing it so that it does not come loose;
- burn the edges of the workpiece on fire so that they do not fray or unravel;
- connect the ends.
Advice! You can also leave free edges, which can then be tied with a bow. This will make the task even easier, but will also make it especially unusual.
When burning the tape in the flame, do everything very quickly so that excess does not burn. If you have a button as a fastening, do not forget to sew on a loop.
From headphone wires
Yes, from such a simple and banal thing you can also create a wonderful, exclusive and stylish thing. You probably have several pairs of headphones in your apartment that have not been working for a long time, but are still taking up space. We recommend cutting them off, leaving only the wiring, and turning them into an elegant “tattoo”.
Advice! Depending on the thickness of the wires, the massiveness of the necklace will depend.
It can be made in one color or you can add other colors and decorate it:
- bugles;
- beads;
- feathers.
How to weave:
- Choose the length; if in doubt, take two wires.
- Connect the ends and secure with a book or other clamp.
- Place the right one on top of the left one, pass the first one under the bottom to form a loop, tighten it to the base.
- Repeat the same movement in reverse side, so that the unfolded loop comes out.
- Continue weaving so that you get an openwork chain.
- During the process, add feathers, beads and other additional decorations as desired.
- Finish when you reach the required size.
- Trim off the excess.
- Melt the ends over a lighter or matches.
- Make a buckle if needed.
- Also hold the edge pressed down by the book and fix it over the fire.
If you want one that goes over your head, you'll need to fuse the ends together to create a continuous loop.
From fishing line
Does your dad or brother like to fish? Have you often found in their drawers deposits of the finest threads that were never useful to anyone? Well, it’s time to take advantage of the supplies and create an exclusive decoration from fishing line that apparently was not useful to anyone on the farm.
It makes especially good tattoo necklaces that decorate:
- Beads;
- Beads;
- Artificial pearls.
Advice!Such an accessory, made of the finest dark cobweb, will give special chic evening dress or a simple white shirt.
Before you begin, in addition to the basics, prepare the following:
- Clamp.
- Book.
- Thick cardboard.
- Scissors.
- Lighter or matches.
- Bugles.
- Beads.
- Beads.
So, let's start creating a masterpiece:
- cut 3 meters;
- fold in half and secure with a binder;
- place the ends on top of each other;
- bring the right one under the bottom to form a loop;
- tighten it;
- repeat the action in the opposite direction;
- weave to the desired length, stringing the decor;
- join together if you are going to pull it over your head when you have completed the braiding.
By combining different base colors, you can get unusual and interesting models.
Rubber bands
Another interesting and rather unexpected option. It is especially good for young girls, but not for status ladies. In fact, it was young people who were gripped by a kind of epidemic of rubber neck accessories, and these could be:
- necklaces;
- bracelets;
- rings.
And such a fashionable takeoff is easily explained:
- creating them yourself is quite simple;
- the base for production is not expensive and is always in stock;
- and the result is an openwork, delicate necklace.
Buy a set of multi-colored or plain rubber bands at the store. As a rule, they are accompanied by detailed instructions about how to weave them.
Advice!Don't forget to purchase a machine and a special hook! Otherwise, nothing will work out for you.
There are a lot of styles of weaving from elastic bands. Choose yours, the most suitable one, and bring it to life! But remember about the appropriateness of age and style: this is an attribute of young girls and teenagers.
Floss with fringe
The manufacturing method and technique are the same as in the case of headphones. If you have ever woven baubles, then it will be easy for you to repeat the steps and make a fringed “strangler”.
Prepare:
- Floss threads.
- Finished fringe (optional).
- Binder (aka clamp).
- Pliers.
- Buckle, button.
- Pendant.
Now that we have everything, the creative process begins:
- secure the ends of the main floss with a binder to the surface (this can be a sheet of chipboard);
- measure another thread 15 cm;
- We place it next to the main one on the right on adhesive tape;
- we tie knots one by one on the base, moving to the left;
- in the end, all central ones should be braided;
- repeat the same in the opposite direction;
- the ends on the sides form the necessary fringe;
- then trim it with scissors so that it is the same;
- upon completion of work, secure the ends;
- install the clasp;
- Secure the pendant in the middle, clamping the ring with pliers.
Advice! If it is difficult for you to make a fringe this way, sew the finished one afterwards.
This option looks very unusual and feminine, made in black.
Lace
These tattoo necklaces look especially rich, a little old school. They reek of medieval chic, ladies in crinolines and wigs with complex hairstyles. It's extremely easy to do. You will need:
- the basis;
- suspension;
- beads;
- needle;
- threads
Measure the desired length, hem the cut edges so that they do not unravel and look neat. Place a clasp on them and a pendant or cameo in the middle. Ready product embroider with beads, bugles or small pearls. The costs are minimal, but the effect is maximum!
Advice! Use cotton, synthetic is “cheap”, forgivable and even looks somewhat vulgar.
How to wear
Creating it is half the battle. Now you need to understand how and what to wear so as not to look ridiculous. Yes, handmade and everything connected with it are now on the crest of a wave and at the peak of popularity. But moderation and taste are important in everything! Much depends on what it is made of.
Ribbon is suitable for such stylistic trends in clothing as:
- casual(relaxed, casual);
- boho(a little carelessness, eclecticism).
Large, massive options are ideal:
- for open T-shirts;
- leather jacket;
- jeans
Velvet and lace go well with:
- light skirts;
- airy blouses;
- sundresses.
For an evening out, choose necklace models:
- from precious metals;
- with pearls;
- gems;
- pendants.
In order for such a necklace to look as advantageous as possible, your neck should be open and attract attention. Otherwise, the accessory will simply be lost and not noticeable. It can also be combined with other chains and beads, creating a stylish layering.
Choker necklaces come in different varieties. If a tattoo choker is firmly associated with shockingness and rebellion, then an elegant velvet on a lady’s neck or a ribbon choker is stylish and very fashionable. What is important is that a choker around the neck is easy to make with your own hands. Study the choker making tutorials presented in the article and create jewelry that will highlight your individuality.
This is perhaps the simplest choker of all. possible options
Materials and tools
- velvet ribbon 50-60 cm long. Can be purchased at stores selling handicraft materials
Tip: if you prefer velvet tape with a tight hold, buy an elastic velvet tape
- end caps - special clamps for the ends of tapes - allow you to beautifully and neatly design sections without resorting to glue or a needle. As a rule, such accessories are sold in stores with materials for needlework / jewelry
- pliers and scissors
Manufacturing instructions:
- Cut the required length of tape
- Lock the limit switches
Wear a choker while tying it beautiful bow behind
How to make a black velvet neck choker?
Materials and tools
- velvet ribbon
- limit switches
- connecting rings
- clasp with chain to help adjust neck circumference
- pendant or medallion (optional)
- pliers and scissors
- sewing needle, sewing thread (to match the ribbon)
Manufacturing instructions
- Measure your neck volume (NC). For example, OR was 33 cm
- Assemble the castle. Using connecting rings, attach the limit switches to the lock. You should receive the assembled velvet fixing element
- Place the resulting mount on any hard and flat surface. Measure its length (L). For example, the length of the assembled fixing element (see photo) is 3 cm
- Taking into account the length of the fixing element, the net length of the tape (BL) should be
BH=OSH-DZ or BH= 33-3=30 (cm)
- Be sure to make allowances for attaching the end switches (1 cm on both sides). As a result, the length of the tape will be 30+2=32 cm
- Cut the required length of tape. If you plan to decorate your choker with a pendant that has a special eyelet, put it on a ribbon
- Lock the limit switches
- If the pendant/pendant/medallion you have chosen does not have an eyelet, sew or attach a decorative element using a connecting ring (after marking the middle of the ribbon)
Fashionable choker necklace is ready. Such as both a daytime decoration and an evening accessory
Choker design option. The following were used in production: velvet ribbon (width - 1.5 cm); pendant with a wide eye (the color of the stone matches the color of the ribbon); lobster lock with adjustable chain 
Choker design option. The following were used in production: velvet ribbon (width - 1.7 cm); cabochon pendant ( handmade) and teardrop-shaped glass bead; lobster lock with adjustable chain How to make a choker with your own hands from satin and velvet ribbon?
Materials and tools
- velvet/satin ribbon 50-60 cm long
- limit switches
- large connecting ring (the diameter of the ring should exceed the width of the tape by 1 cm)
- pliers and scissors
- fabric glue
Manufacturing instructions
- Place the tape on a flat, hard surface
- Cut into two equal halves
- Place the connecting ring over the middle cut
Jump ring location - Wrap the free ends of the ribbon, forming ring holder loops. Secure the loops with glue
Tip #1: if you don’t have special glue at hand, don’t despair. The loops can be secured by making a few neat stitches using a needle and thread
Tip #2: If the needle and thread stitches are not your thing best friends, decorate the edges of the ribbon with beautiful end caps. Be sure to make sure that the ends have loops for attaching connecting rings. Secure the ring using connecting rings
Unusual idea: a transparent choker with a ring looks interesting
To make such a necklace, use silicone straps of suitable width. You can buy them in stores selling handicraft materials. Secure the ring with rivets. The choker is fixed on the neck using regular buttons. Rivets and buttons can be installed in a clothing/shoe/bag repair shop.
How to make a black velvet choker with a pendant? DIY choker with pendant
Agree, it is the pendant that determines the character of the choker.
Suspension can be
- purchase at a jewelry store if you like expensive jewelry
- buy in the “Everything for Jewelry” department if you prefer a democratic style
- found at a flea market or antique shop (for lovers of jewelry with history)
- do it yourself. A handmade pendant is a great way to stand out from the crowd and even get a little rowdy
To make an original choker pendant you will need
- tin bottle cap (for example, beer bottle). The cover must not be deformed
- decorative elements: beads, seed beads, stone chips for jewelry, cords, etc.
- quick-drying glue. In this case it is convenient to use glue gun, which can be purchased in building materials departments
- jewelry wire (5 cm) or connecting ring
- pliers
- file
Instructions for making a choker pendant
- Using an awl, make a through hole in the side of the lid
- File away metal burrs with a file
- Form a loop from the wire using pliers. If you decide to use a jump ring, skip this step
- Fix the loop in the lid hole / insert the connecting ring
Tip: You can also paint the outside of the lid at this stage. acrylic paint
- Decorate your pendant with decorative elements and glue. If using sequins or drawings/photos to decorate the pendant, use clear epoxy jewelry resin to fill the void and create a protective screen
How to make a black choker tattoo
So many
The simplest pattern for weaving a choker tattoo is shown in the photo below.
Step-by-step photo instructions will tell you the main stages of making jewelry
1. Start by preparing your materials
Tip: you will need spandex 1 mm thick and 3 m long. You can buy a special fishing line for weaving chokers in stores with handicraft materials
2. Fold the vein in half and secure with tape or a large paper clip
Weaving a tattoo choker 
The tattoo choker stretches well, so there is no need to use a special lock for the choker. Many choker braids fasten the last knot into the first loop of the snake. This decoration is worn over the head
If there is a need to adjust the length of the jewelry, use jewelry locks with chains and special ends for decorative cords
How to make a choker tattoo from beads?
Beaded tattoo choke combines elegance and originality
An easy way to make a choker tattoo from beads
- Take two strong threads (fishing lines) 1.5 m each
- String beads onto each thread
- Tie a choker using beaded threads instead of spandex (you will find a knitting pattern in the section “How to make a black choker tattoo”)
Advice. should be secured with a special lock-lock
Choker tattoo made of beads (schemes)
For beginner needlewomen, these are suitable simple circuits
The technique of bead weaving is quite simple, and the techniques are repeated. After reading the description of the work according to the first scheme, you can easily create many beautiful accessories
You will need
- beading line - 3 m
- large beads different shapes and colors (blue hearts or other curly beads - 10-15 pcs., round blue beads - 2 pcs., round brown beads - 2 pcs.)
- clasp for jewelry
- scissors
Manufacturing instructions
- Place the clasp on the fishing line and secure it with a knot in the middle of the fishing line. This way you will get two working threads of equal length
- String blue and then brown beads on both threads
- Separate the threads and string 9 beads on each
- Connect the threads and string a figured bead (heart)
- Continue knitting, alternating steps 3 and 4
- Once the choker reaches the required length, string first brown and then blue beads onto both threads
- Secure the lock ring with a double knot. To ensure secure fixation, tuck the ends of the fishing line into a figured bead
The third pattern can be challenging because it uses parallel weaving. More detailed diagram techniques are presented below
How to make a choker from beads: weaving pattern
The bead necklace pattern presented below is for experienced bead weavers. However, for the sake of such beauty it is worth a little effort
How to make a choker from lace?
- Buy a lace ribbon of the required length. How to determine the length of a ribbon (lace or velvet) is described in the section “How to make a black choker for a neck from velvet?”
- Fix the end switches, attach a jewelry lock or sew on buttons
The decoration is ready. If desired, the choker can be decorated with beautiful beads or a medallion
How to make a white lace choker?
A delicate choker will fit well into summer wardrobe
- Cut the lace to the required length
- Secure the limit switches
- Secure the jump ring and lock
Your decoration is ready
How to make a black lace choker?
Making this choker will require some effort, but look how beautiful this accessory is!
Materials and tools
- black felt (for flower)
- black lace ribbon (choker base)
- thin red braid (for decorating the base)
- black braid 1 cm wide (for ties and design of cuts)
- black chain (for decoration)
- scissors
- pins
- needle and thread
Manufacturing instructions
- Make a flower template
- Cut from felt
- 6 elongated elements (for petals)
- 2 circles (for the middle)
Fold the elongated elements so that the bottom part is slightly longer than the top, and secure with pins
- Take one of the blanks for future petals and stitch along the fold line
- Pull the thread a little: a small fold will form on the fabric. Without breaking the thread, do the same manipulation with all the workpieces
- Collect all the petals to form a flower. Sew a circle on top. Decorate the middle circle with beads (black and red) or sequins
- Decorate black lace with red braid
- Secure the red ribbon while sewing on the black ribbon. Decorate the cut by lining the entire length with braid
- Measure your choker. Sew the flower at the point that roughly divides the ribbon into 2/3 and 1/3. Sew the remaining circle to the place where the flower is attached from the wrong side. Attach a decorative chain if desired
How to make a fabric neck choker
This vintage choker looks incredibly elegant
Materials and tools
- wide lace (the length of the lace is equal to the circumference of the neck)
- black ribbon 1.5-1.7 cm wide. Length as desired, but not less than 60-70 cm
- beads or beads for decoration
- scissors
- needle and thread
Manufacturing instructions
- Create curly cuts at the end of the black ribbon Fabric neck choker DIY leather choker
- Choose the right belt width
- Try the belt around your neck
- Trim off the excess. Decorate the cutting area with a suitable end cap
- Decorate the choker at your own discretion
Advice. Medallions made from lightning will look good on a leather choker
Video: Ribbon around the neck. Decoration for the image of a witch or vamp. Anna's Perlen. Beads with Anna
WITH in English“choker” is translated as “strangler.” This is not surprising, because this accessory fits the neck so tightly that it creates a wrapping effect. Today you can find a huge variety of chokers on store shelves. But if you want to emphasize your individual style and taste, it is best to make it yourself.
Today we have prepared for you instructions on how to make a choker with your own hands without extra costs.
DIY choker tattoo
The most popular type of accessory among young people is the choker tattoo.
We will need:
- a thin flagellum or fishing line about 2.5 meters long;
- stationery clip;
- lighter or matches;
- beads for decoration.
How to do:
- fold it in half and fix the working thread with a clamp to the book (or you can simply stick it with tape);
- we throw the right part of the thread over the left to form a small loop;
- Now we wrap the left thread around the right one so that the loops point in opposite directions;
- repeat the steps until the choker reaches the desired length;
- If desired, you can string one bead onto each loop, attach a pendant or pendant in the middle of the decoration, or you can place beads along the entire length.
We tie the first loop with the remaining tails of the thread, cut off the protruding ends and seal them with fire. IN in this case fasteners will be redundant.
Choker made of colored rubber bands
Elastic bands for weaving have won the hearts of teenagers - there are so many things they can weave with! You can also make a choker from them. If you are familiar with the fishtail weaving technique, then weaving the decoration will not be difficult. Well, if you took rubber bands and a machine for the first time, we offer a mini master class on how to make a choker from rubber bands. For convenience, each rubber band is in a separate color, so as not to get confused.
We will need:
- a set of rubber bands for weaving;
- slingshot for weaving or your own fingers;
- hook-and-loop fasteners
How to do:
- put a rubber band on your fingers or machine white, twisted in a figure eight;
- We put on blue and red elastic bands on top, without twisting them;
- carefully remove the ends of the white elastic band so that they fix the blue and red elastic bands;
- put the white rubber band back on and secure it with the red tips;
- repeat these steps until the choker reaches the desired length.
You can also weave the decoration using any convenient technique. In any case, it will look stylish and playful.
Ribbon choker
This decoration will emphasize the elegance and refined taste of its owner. Velvet or satin ribbon look advantageous as a material.
We will need:
- 50 cm tape;
- glue;
- scissors;
- decorative ring for decoration;
- clasp.
How to do:
- cut the tape in half;
- We fix the ring between the tapes and fix the fold line with glue.
- If desired, you can attach fasteners to the ends of the ribbon or simply tie it in a knot.
It’s even easier to make a choker with a bead or any other pendant. For this even step by step description for beginners it is not required, just insert the ribbon into the ring and tie it around your neck.
For special occasions, the ribbon can be decorated with rhinestones or beads, the main thing is not to overdo it!
Lace choker
Another elegant piece of jewelry that makes the list. best ideas homemade chokers - lace decoration. To do this you will need any lace ribbon, jewelry clips with clasps, pliers and 3 minutes of free time.
Manufacturing process:
- cut the lace according to the circumference of the neck;
- fix the clamps with pliers.
The choker is ready - enjoy the result!
For an evening out, the choker can be complemented with an elegant cabochon or stone.
Thread choker
Not the fastest option in terms of time, but, nevertheless, the photo of the choker looks very impressive!
We will need:
- a set of multi-colored floss threads;
- pendant or pendant for decoration;
- scotch;
- scissors;
- tape measure.
How to do:
- measure the circumference of the neck and add 2-3 cm to the resulting figure on both sides for ties;
- we separate 6 identical threads and fix them with tape at one edge for ease of work;
- separate a thread of a different color and tie each of the 6 threads in turn with a simple knot;
- we tie colored knots of thread along the entire length;
- fix the pendant in the middle of the decoration;
- The ends of the colored threads can be cut off or left.
To prevent the pendant from darkening over time, it can be coated clear varnish for nails.
Headphone choker
If you don’t have any of the listed materials at hand, but have old non-working headphones, you can use them as a working material.
How to do:
- cut off the excess parts so that only the wires remain;
- divide the double wire in half and cut off the fastening;
- tie the ends of the wires into 2 knots;
- We perform weaving in the same way as making a choker tattoo.
This way, a non-working mobile phone accessory can easily be turned into a fashionable decoration.
As you can see, you can make a choker from any available materials. They are so easy to make that you can make original decoration for every outfit.
DIY photo of chokers
