The habit of shaving has its roots in the distant past, so this process is familiar to any man. True, then the “tool of labor” had little in common with modern devices, but the essence of the procedure did not change. But even today, not everyone knows how to shave with a straight razor.
The most capricious razor
While there are virtually no problems with modern tools, using a straight razor raises many questions and prejudices. She is by far the most demanding. At first, you need to use it slowly and carefully so as not to damage the skin.
It is important not only to master how to shave with a straight razor, but also to know that you must take care of it and sharpen the blade correctly. Then the procedure will only bring pleasure, since one pass will shave off quite a large number of hair. This blade is especially popular among aesthetes and connoisseurs of the classics. Most often it is made of stainless and carbon steel, which is quite justified.
Dry shaving
This type of removal of unnecessary stubble means there is no need to moisturize the skin. You can shave with mechanical, electric or electromechanical clippers. The treated areas will not be very irritated, but the hairs will grow back very quickly. The need to shave every day can be considered the main disadvantage of this method.
Wet shaving
To understand how to shave with a straight razor, you need to understand that it is used for shaving while moisturizing the skin. This method is also suitable for the use of safety machines. It's fast and reliable way, which gives good results: stubble grows much longer than after dry shaving. But you should know that irritation may occur, which even high-quality gels and balms cannot always cope with. This is especially true in the winter.
What do you need for a close shave?
Lately, close shaving is not as popular as it used to be, but it still has its advantages. The most important thing you need for the procedure is a straight razor. There are models from different manufacturers on the market, so the choice is quite large. To understand how to hold a straight razor, you need to know that it consists of a handle and a blade, which is made from steel of a special composition. The material has properties that help heal minor wounds and scratches.
An important accessory is the editing belt. It can be of a suspended type or stretched on a special bar with a handle. An abrasive paste and shaving brush will also come in handy. It is used to apply cream, which forms a thick foam.
Preparing the razor
Before proceeding directly to the procedure, you need to prepare the razor. It needs to be “pulled” on a belt. This should be done on your own, controlling the constant angle of the blade. If you do not follow this rule, you can damage the instrument.
The foam is whipped with a brush and applied to slightly moistened skin. After shaving is completed, you need to apply a towel soaked in hot water to your face. Then you can apply the balm. These measures will help avoid irritation and redness. skin. If desired, you can wear it on your face
Disadvantages of close shaving
If you use a straight razor, the disadvantages of this method can be minimized. But still they exist: people who use such razors note the high cost of the tool itself and the necessary accessories.
Great care is required when handling a straight razor. One awkward movement is enough to damage the skin. During the entire procedure, you should follow main principle- do not drive the machine horizontally.
For men who need a straight razor, reviews will help them choose suitable model. People who practice this method of getting rid of unnecessary vegetation claim that this procedure is a kind of ritual. Shaving brings undeniable pleasure, and the skin becomes soft and smooth.
Benefits of a straight razor
A machine of this type has a number of advantages, which are completely pointless to dispute.
- Long service life. If you know how to shave with a straight razor and handle it correctly, straighten it with a belt and don’t cut various materials, then it will last a very long time. Sharpening and cleaning dark spots will allow the machine to be passed on to the next generation.
- Clean shave. Men who use a straight razor are confident that it gives a much cleaner shave than safety razors. At first it may seem that using it is difficult and inconvenient, but with experience it becomes clear that this is not at all the case.
- Saving. The advantages of a straight razor are that although all necessary accessories They're not cheap, but they still save money. This is because there is no need to buy removable cassettes. The paste needs to be purchased about once a year, and the belt can last about thirty years if you treat it with care.
What do you need to know?
If a man does not know how to use a straight razor and has no experience, he is usually very nervous the first time. Therefore, before the procedure you need to calm down, because it is extremely important to have a firm hand. To get used to the machine, you can rotate it, try the sharpness of the blade, but do not start shaving.
The event will take place without difficulties and problems if you remember three important rules:
- The razor must be well sharpened.
- The tilt angle is 30 degrees.
- The skin of the face should be taut.
If you do not follow these points, it will be difficult to understand how to shave with a straight razor correctly. If the blade is not sharp enough, then cuts will remain on your face even with the most gentle and careful shaving. Maintaining an angle of thirty degrees is also justified: in this way you can achieve maximum smoothness of the face and avoid irritation. Tight skin is probably the most important thing. If folds form, cuts are guaranteed.
How to shave?
You need to start by preparing the skin. To ensure a smooth shave, your face must be moistened and steamed. For these purposes, it is convenient to use a terry towel soaked in hot water. Just apply it to your face for a couple of minutes.
Some men use it, but it is better to purchase special foam. All movements should begin in the direction of growth of the bristles. To achieve smoothness, you need to run the blade several times on one area.
First of all, you should shave the right side of your face, stretching the skin with the fingers of your left hand. When excess vegetation is removed, you can move to the other side. To avoid missing areas, the skin must be stretched well.
To shave the lower part of the face, you need to tilt your head to the right or left, and then tilt it back and run the blade along the chin. All actions should be performed carefully and slowly to avoid injury. At first, the procedure will take quite a lot of time, but then things will go much faster.
Sometimes men doubt whether they need a straight razor. Reviews will help you make your final decision. Experts assure that this method of removing stubble is worth mastering. It’s not for nothing that this procedure is called the “royal shave.”
Shaving your head
The easiest way to make your head smooth is to use two tools: a machine and a straight razor. You cannot begin the procedure without lubricating the skin with gel, which forms a thick foam. It is more convenient to apply the product to the treated areas gradually, rather than simultaneously to the entire surface. But shaving your head with a straight razor at the back of your head can be challenging. A second mirror will help you cope with this task. Although many men agree that it is disorienting, therefore it is better to carry out all actions by touch.
After your head becomes smooth, you need to thoroughly rinse off any remaining product and hair. By feeling the entire surface with your hands, you can determine where the stubble remains and repeat the procedure again. It is necessary to shave against the direction of hair growth.
Facial hair on a man is associated with masculinity and strength. But, not all men like to wear a beard, so they prefer to regularly shave the stubble on their faces. The stiffer the stubble, the more difficult and carefully it has to be shaved. As a rule, those with hard stubble are not suitable for conventional razors with removable blades or electric shavers, which do not give desired result, scratch the skin and cause irritation. The ideal weapon in the fight against stubble is a straight razor, which not only shave your face efficiently and smoothly, but also extends the period between shaving procedures - you have to shave less often. The only disadvantage of shaving with a straight razor is that there is Great chance cuts on the face and neck, therefore, before starting the procedure, you need to master the shaving technique and choose the right tool.
How to shave with a straight razor - preparing the tool
The basis for a perfect shave with a straight razor is a high-quality tool made of especially durable metal. The razor should be as sharp as possible and not have any bends or any deformations. Only with a properly sharpened straight razor can you achieve perfectly shaved, smooth skin, without irritation or scratches.
Trust sharpening of the tool only to a professional craftsman. The process of sharpening a straight razor is quite specific and difficult, requiring special skill and experience. The instrument is straightened on the belt using a special paste, holding it at a certain angle. It is impossible to visually determine the sharpness of a razor. There is a popular test to determine the sharpness of a blade. You need to fix the razor with the blade up and smoothly lower it perpendicular to the blade of the hair. If, barely touching the blade, the hair splits into two parts - the sharpening is done perfectly.
How to properly hold a straight razor
There are two main ways to hold the instrument:
- First way. The tool is held in a hand that is comfortable for you, with the blade down and the handle up. Your thumb should rest on the bottom of the razor, to the left of the cutting edge. The little finger should rest on the unsharpened edge, being at the end of the razor - at the junction with the case. The remaining fingers are located on the edge.
- Second way. This method is considered by many to be more convenient. Take the razor in your hand, blade up, handle down. Place your little finger under the so-called tail (the screw that secures the instrument to the case). The thumb should be on the inside of the unsharpened edge with notches, and all other fingers should be on the outside.
How to shave with a straight razor: stages of work
Shaving with a straight razor requires a certain level of skill and experience. Beginners should be extremely careful and take their time. Only over time will the hand become firm and confident. The main rules for safe shaving with a straight razor are knowledge of shaving techniques and rules, as well as calm and measured movements.
A straight razor, or rather a bladed razor, is a tool with a sharp blade that was widely used from ancient times until the mid-twentieth century, when it competed with. Nowadays, despite wide choose shaving devices, men often prefer an instrument with a long history - an expensive or budget straight razor.
Its main advantages are:
- durability;
- excellent shaving quality - provided you use a well-sharpened tool, even the hardest and thickest stubble will not resist it;
- shaving the hair at the very base, which allows you to shave less often;
- fewer passes - due to the significant length of the blade;
- minimal likelihood of irritation - since the sharp blade flawlessly removes stubble in one pass;
- pleasure from the shaving process.
Therefore, despite the rapid development of technological progress, men do not forget what a guard is, as a blade-type razor is called in everyday life. But in order to get excellent results and pleasure from the process, you need to use a high-quality and well-sharpened tool, use it correctly and properly care for it.
For beginners, this process looks too complicated and risky. Indeed, at first, an awkward turn of the blade often leads to cuts. But as you master the tool, movements become more confident and accurate, skills and experience are acquired, and the risk of injury rapidly decreases.
Preparing the Blade Razor
Only a high-quality device made of high-strength metal, sharp, and free from unevenness and deformation, can provide high-quality shaving. Sharpening a straight razor should be carried out by a professional craftsman, since this process requires special knowledge, skills and experience.
A properly sharpened tool is the key to perfectly shaved skin, the absence of scratches and irritations, the integrity of the tool and an extended service life. And if you consider how much a men’s blade razor from leading manufacturers costs (approximate price is 10,000 – 30,000 rubles), it becomes clear that saving on sharpening it is not advisable.
Editing such a tool is carried out using the one included in the package. It is advisable to adjust the caution before each use, then the shave will be as clear and clean as possible. To check the sharpness of the razor, you need to place it with the blade up, and bring a hair on top perpendicular to the cutting edge. Ideally, it should break into 2 parts, barely touching the edge.
In addition to the razor, to effectively cut stubble, you need to prepare soap or a shaving brush and an aftershave product that suits your skin type. It is not advisable to use gel or foam from a spray can, since self-whipped foam from soap or cream is much thicker and provides better glide.
Straight razors with replaceable blades
A separate category of straight razors are shavettes or models with replaceable blades. They do not need sharpening and straightening on a belt - you just need to change the blades as they become dull. Depending on the model, cutters are equipped with standard or special extended blades. How to insert a blade into a straight razor depends on its design features. There are models with an opening and retractable mechanism for installing blades.
Standard ones need to be divided in half without removing them from the envelope and without holding the tip. After this, the separated half is placed in the shave mount and secured with the provided mechanism. Models with extended blades usually have plastic holders.
There are different ways to be wary, but the most common are 2 options:
- Position with handle up and cutting edge down. In this case, the thumb is placed with emphasis on the lower part of the tool, to the left of the cutting edge, the little finger is located in a safe area at the end of the tool, in the area of connection with the case. The remaining fingers are placed on the edge.
- Blade up and handle down position. The little finger is under the ponytail, thumb- on the inside of the safe edge with special notches, the remaining ones - on the outside. The tilt is firmly fixed.
The basic grip of a blade razor can be adjusted as you use it to improve comfort and control.
How to shave with a straight razor yourself
Using a safety hazard requires some experience. It is important for beginners to follow shaving technology and rules, be extremely careful and avoid haste, and act calmly and measuredly. Gradually the hand will gain firmness and confidence. The tool must be held at an angle of 30° to the surface. During shaving, it is advisable to pull the skin in the direction opposite to the direction of movement of the blade.
If you are puzzled by the question of how to learn how to shave with a straight razor as a beginner, read the brief instructions for using this tool:
- First, prepare the skin - steam it with hot water (take a shower) or soak it in hot water terry towel. Steaming will open the pores and soften the stubble.
- Rub a special one into the skin - it will make the further process easier and more comfortable.
- Soak for 1-2 minutes in hot water, then remove and shake off.
- Apply shaving cosmetics - use a shaving brush to whip up a strong foam from soap or cream, apply it generously in a circular motion on the face and neck. Remove excess with a shaving brush.
- Take the guard in your working hand and use your other hand to stretch the skin with your fingers. Set the blade at a 30° angle. Use short, controlled movements and rinse the blade regularly. There is no need to press on the tool - the movements should be light and sliding. Perform the first pass according to the growth of the bristles. Treat small areas one at a time, moving from one to another. Use extra care when shaving your neck and area under your nose.
- To ensure maximum smoothness, lather your face again and do a second pass on all areas against the hair growth.
- If necessary, treat accidental cuts with styptic powder.
- At the end of the procedure, use cool water to rinse off any remaining foam from the skin and apply the product you prefer to your face using tapping movements, preferably with an antiseptic and soothing effect.
How to properly guide a straight razor
To get a comfortable glide, point the blade at an angle of 30° to the skin. First you need to carefully walk down from the temporal region, towards the angle of the lower jaw, then from the central part of the cheek towards the chin. Then upward movements are performed from the chin to the lips, and the mustache area is worked out. After this, you need to smoothly draw the blade along the contour of the face and move to the neck.
For a smooth and smooth glide of the blade, remember to stretch the skin with your free hand. After working on the right side, the stubble on the left side of the face is shaved. Repeated shaving (against the direction of hair growth) should begin from the neck, moving up the angle of the lower jaw to the temporal area. Using a blade razor requires a lot of time and effort, but if done correctly, your efforts will be rewarded with pleasure from the process and flawlessly smooth skin.
Caring for apprehension
Proper care involves:
- Before each use, edit using a belt to smooth the edges of the blade. The belt should be hung on the furniture and pulled tight with your free hand. Take the tool by the neck and point the cutting edge away from you. Bring the safety blade to the far end of the belt and run along its entire length, with light pressure and without lifting it from the belt. Then turn the tool over and run the blade along the belt in the opposite direction. Typically, 15 passes in each direction are sufficient for straightening.
- After each use, rinse the instrument under running water and then dry it with a cloth or towel (not on the sharp side).
- Store in a low humidity area - not in the bathroom.
- For rare use, periodically lubricate the device with oil. Suitable oil for sewing machines or other mechanical apparatus.
- If dull, professional sharpening is required with a whetstone with a grit of 4000/8000.
Following the rules of blade razor care will help maintain the tool in functional condition and provide it with long years services. And simple adherence to safety rules, slowness and caution will help to avoid cuts and injuries. Avoid moving with an open razor, do not try to catch it if it falls, and during the learning phase limit yourself to short movements. Over time, you will gain the necessary skills and be able to make long movements.
It doesn’t matter what you prefer – a formal suit with a tie, or jeans with sneakers, there are things that every man would do well to learn. We include shaving with a straight razor as one of these skills.
Over time, progress makes some things better. We will never give up our smartphones, but if the conversation turns to shaving, we will be forced to admit that our ancestors mastered this skill better than us, if each of them was familiar with a straight razor.
Shaving with a straight razor takes a little longer than with a modern razor, but the benefits of shaving will be worth the effort. You will be able to shave much closer, over time you will save money on the cost of replacement cartridges, and you will have a clean-shaven face with you all the time. Take a little extra time for yourself and get ready for best shave that you have ever had.
Preparing to shave
To make shaving comfortable, follow these simple rules:
You need to prepare your skin for shaving. To do this, it is best to steam your face with warm water. The best option There will be shaving after a hot shower, but if you don’t have time to take a bath, wrap your cheeks and chin with a towel soaked in hot water for a few minutes (as they do in barbershops). This will open up your pores and soften your facial hair, making it much easier to shave.
Apply to skin , it will reduce friction between the skin and the blade and reduce the risk of cuts and irritations. Blot the steamed skin with a towel to remove excess moisture, drop a little oil on your palms and rub between them. Then apply a thin layer of oil to your face, but so that it is noticeable. Wait a minute and let the oil absorb a little. Then move on to applying foam.
Apply shaving foam to your face. You can use gel for this, or special . This product is more traditional for wet shaving; you can feel like a British gentleman by standing in front of the mirror and whipping the soap in a special cup until it foams.
Use a brush; it will lift the hairs, which will allow the blade to glide over the skin more easily and shave them off. This will make your shave cleaner and more enjoyable; applying foam with your hands will not achieve this effect.
Dip the razor blade into a glass of hot water for a few seconds and begin the procedure.
How to shave with a straight razor
Before you touch your face with a blade, you need to decide how to properly hold a straight razor. The correct grip is already half the success.
How to properly hold a straight razor:
First, hold the razor only in your dominant hand. For a right-handed person, trying to shave with your left hand can lead to unpleasant consequences - any incorrect movement with such a tool can lead to serious cuts.
No matter how paradoxical it may be, shaving masters never touch the handle of a classic folding straight razor. The handle is bent upward 90 degrees, and your fingers hold the neck of the razor. Here are some basic techniques on how to properly hold a straight razor:
The cutting edge is directed downwards - index, middle and ring fingers The razor neck is placed on top of the outer side, the thumb is held from below on the inside of the neck, resting against the heel of the blade, the little finger is placed in the notch of the shank.
The cutting edge is directed upward - turn the razor with the bent handle towards the floor, the index, middle and ring fingers still lie on the outside of the razor neck, the thumb on the inside, resting on the heel, the little finger is in the recess of the shank.
The cutting edge is directed to the side, the blade is directed perpendicular to the floor, the index and ring fingers lie on the inside of the razor's neck, the ring finger holds the outer part of the shank, the little finger lies on the inside, the thumb presses the razor in the area of the junction of the base of the blade.
Shaving technique with a straight razor
Follow the basic rules when shaving
Pull the skin tight
With your free hand, pull back the skin in the area you want to go over with the razor. The skin is pulled in the opposite direction from the movement of the cutting edge. During shaving, the area of skin in the area of the blade should be as taut and flat as possible (but only to a comfortable state). If you're holding a razor right hand, with your left fingers, pull the skin directly behind the blade, no further than 2-3 centimeters from it. With each pass with the blade, pull the skin back. Insufficient skin tension is the main cause of cuts when shaving with a straight razor.
Hold the razor at the right angle
The razor blade should be positioned at an angle of 30 degrees relative to the skin. Some professionals do not recommend keeping the angle higher, otherwise the angle of attack will be too aggressive, which can lead to hair pulling, irritation and ingrown hair.
It can be difficult for beginners to immediately maintain the desired angle of inclination. To choose the right one, place the razor flat against your cheek, then move the back 30 degrees.
Cut hair smoothly
Hand movements should be smooth and frequent; hair should be carefully trimmed. The hand should move only in the wrist with minimal tension.
High pace of life modern man forces you to distribute your time literally by minutes. The more we appreciate the moments when we can, left alone with ourselves, relax and devote some time to ourselves.
Classic straight razor shaving combines elements of relaxation, massage and work on your image. Anyone can master the technique of the cleanest shave, which has returned to fashion, because 80-85 years ago all men shaved this way.
Shaving in English You will need the following tools and accessories:
- Razor. For men with thick and coarse stubble, it is recommended to use 2 blades per shave.
- . Badger hair is considered the softest and therefore - the best material for the brush. Boar bristles take second place, but are more suitable for hard soap. Synthetic bristles can create static tension, causing slight irritation to the skin.
- Grindstone, made of abrasive material, used to sharpen a classic razor blade.
- Leather belt used to straighten the cutting edge of the blade and give it maximum sharpness and smoothness.
- or shaving cream. It is better to choose a special soap for classic shaving, natural, without dyes. Gels and foams from a spray can are not recommended for use in in this case- they do not produce foam of sufficient density.
- A bowl or mug for soaking the brush. It is better to take it from unbreakable material, with a capacity of 200-250 ml.
- Towel. Soft, clean, made of natural cotton.
- Hydrogen peroxide or powder to stop bleeding.
- Hot water. It is better to use boiled water, as it is softer than tap water.
Important! Don't waste money on quality tools and accessories: they will last longer and the results will be better.
A little theory
Carefully preparing your face will make it easier for the blade to glide across your skin and cut through stubble cleanly. The sharpness of the razor, smooth movements, and the absence of pressure on it are the key to a high-quality retro shave without cuts and.
Try to shave wide stripes and carefully stretch the skin, helping yourself with your tongue and facial muscles.
To position your hand, you can first practice on flat areas of the face. Treat your cheeks with a blade razor, and the rest of your face with a safety razor until you feel confident and precise in your movements.
Did you know? The great rulers Peter I and Alexander the Great required their subjects to shave their faces. Alexander believed that it was easy to grab a soldier by the beard in battle, and did not start a battle without shaving, and Peter I, in addition to his personal example, introduced a high tax on beards in 1722.
Features of hair growth
On different parts On the face and neck, hair grows at different densities and in different directions. It is important to consider these two points when preparing and during the shaving process.
The thicker and tougher the beard, the more thoroughly you need to steam and lather your face. Traditional shaving allows you to cut hairs cleaner, so stubble does not appear as quickly.
Did you know? If a man never shave in his life, the length of his beard can reach 8 meters.
How to hold a razor correctly
Shaving technology provides 3 ways to hold a bladed razor for work in different areas.
The methods differ:
- blade direction- down or up;
- turning angle razors relative to the wrist;
- position of the little finger on the tail of the instrument.
The shaving guard is held by the neck with the thumb, index and middle fingers, and the little finger secures the heel of the razor.
Anyway You need to hold the instrument firmly, but without much tension in your fingers.
The main movements are performed by the middle and inner part of the blade, as they are better controlled by the fingers than the head.
Skin stretching
For a clean hair cut the skin should be well stretched. To do this, use the index or middle finger of the free hand to tighten the skin in the direction opposite to the movement of the razor, retreating 2-3 cm. The fingers are placed on an area of the skin free of soap suds. Excess foam is removed with the back of the razor.
Shaving technique
The technique of shaving with a straight razor involves two passes for each area of the face:
- by hair growth;
- against hair growth.
If the stubble is hard and thick, during repeated shaving, another movement is performed: first in the transverse direction, then against the growth.
Movements should be light and rhythmic, performed through movements of the hand, and not the entire arm.
Before running the blade over the skin for the first time and after each subsequent one, wipe it on both sides with alcohol.
The angle of inclination of the razor relative to the skin surface is 20-30°.
Did you know? Impresses some women male face with some roughness on the cheeks. To create such a brutal effect, you can skip the stage of shaving across and against hair growth.
How to properly shave with a close shave
Shaving with a straight razor requires concentration, a steady hand and Olympian calm. To acquire good skills you will need constant practice. Prepare everything you need in advance, try not to be distracted by anything.
Preparation
It is better to shave after a shower or bath - warm, moist air will help your pores open better.
Small a towel is soaked in hot water, apply to the lower part of the face and neck, leave until cool. For hard stubble, apply this hot compress twice.
In a mug of hot water soak the bristles of the shaving brush, then change the water.
The foam is whipped either in a circle or on a soaped face, moving from the center to the ears. The foam should be thick, dense, hold its shape and not spread. After 3-5 minutes you can start shaving. If the foam dries out during this time, it is applied again.
Process
Shaving start according to hair growth, from the temple edging line from the side working hand. The skin is pulled a little higher with the second hand.
The razor is placed flat on the skin, blade down, its back raised to the desired angle. The instrument is moved from top to bottom from the temple, along the outer part of the lower jaw to the middle of the cheek, not forgetting to stretch the skin.
Having followed the hair growth of the cheeks to the corner of the mouth, having shaved the ear pads, move on to the convex part of the chin. It is shaved from the bottom to the hollow separating the lower lip.
Next they shave upper lip , very carefully moving the razor from top to bottom. Then the skin is treated along and under the lower jaw, in the direction from the middle of the chin to the ear, trying to leave as little untreated surface on the neck as possible.
The neck is shaved with movements from bottom to top, from the side to the Adam's apple. In the same sequence, a pass is made along the hair growth on the second half of the face. Make sure all hairs are cut off on the first pass.
Important! Particular care must be taken when working with a razor near the nose, earlobe, Adam's apple and where the skin forms folds.
On the second pass against hair growth the face is again thoroughly covered with soap foam. If necessary, change the blade.
The razor slides from bottom to top, against hair growth. The movement begins from the neck under the ear, moving to the outer part of the lower jaw and to the area under the temples.
Then shave the middle part of the cheek, lower jaw, chin, upper and lower lip, changing the direction of movement of the razor to horizontal.
The neck is shaved with vertical movements, from the Adam's apple to the side surfaces, against the hair growth.
You can watch this video on how to properly shave with a straight razor:
Skin care after the procedure
After finishing shaving, face wash with cold water. This will refresh the skin and close the pores.
After patting your face with a dry, clean towel, apply lotion or lotion appropriate to your skin type.
Rules for the use and storage of a straight razor
It sounds paradoxical, but A sharp razor is safer for shaving than a dull one. A well-sharpened blade glides without pressure and causes less damage to the skin. The blade must be regularly sharpened, edited, and lubricated with oil.
Having finished shaving, instruments are washed from foam and hair residues.
The brush is dried, shaking it off and hanging it with the lint down.
Drops of water from the razor are carefully wiped away paper napkin.
Apply oil to a dry blade.
The razor should be stored in a case, outside the bathroom and places with high humidity.
Precautionary measures
- Don't try to catch a falling razor.
- You can only carry and move with a closed razor.
- If your hands are shaking, it is better to use a safety razor.
- Do not use a blade with defects in the cutting edge.
Important! Close the blade if something distracts you from shaving: during conversations, forgetting and waving your hand, you can cause serious cuts.
A properly shaved man's face remains smooth, attractive and fresh longer. A royal shave is, without a doubt, something that a modern man can afford.
