Does beauty require sacrifice, as the famous “axiom” says, or are modern magicians and fighters for feminine beauty without effort, did you find the opportunity to avoid these senseless sacrifices - or at least alleviate them? The sweetness of the feeling of taking off your shoes after a day of work is known to every lady whose dress code does not allow her to wear slippers at work. And if flat feet, or hallus valgus, are added to uncomfortable shoes, then wearing shoes turns into real torture...
For your attention - the most necessary devices for wearing shoes comfortably - and not only!
External shoe overlays and stickers
First of all, we are talking, of course, about safety and comfort.
If, as part of your job, you have to run in heels every day on smooth and slippery floors, and your overworked calves can already be the envy of athletes, and figure skaters can envy your pirouettes, then this device is for you! You no longer have to feel like a heron, balancing on a slippery floor and losing your grace in front of everyone: inexpensive Velcro stickers will save you from slipping and risking injury on a smooth floor.
The stickers are as thin as possible, have a rough surface and are firmly glued to the soles of shoes, which allows you to elegantly click on heels and stilettos at any speed - on marble floors, on wet pavement, in the subway, and at work.
The most favorite places for calluses on the feet are, as you know, the heels, which are forced to suffer from any new shoes, and from old ones too, if you need to spend the whole day on your feet. Truly magical modern pads-in-ears help protect your heels from calluses.
Covering the entire heels, the inserts are made of medical silicone or eco-suede (or other safe materials), have increased softness, and do not reduce the size of the shoes.
With such inserts, new shoes are not scary, even if you have a night party, banquet or excursion ahead.
In addition, the Russian market presents…
-
.
Such models also fix the heels so that they do not jump out of the shoes. -
.
Or corrective heel pads that fix the heels, reduce the load on the spine, and reduce pain. - Inserts for the lower part of the heel
, getting rid of pain and created specifically for people with or painful fissures.
-
, which are recommended for hallux valgus or varus foot.
Thanks to their beveled shape, they provide the necessary correction for clubfoot, reduce the load on the joints, help correct hallux valgus, and in addition, extend the life of the heels, which will not wear out so quickly.
Insoles and inserts with orthopedic properties
First of all, these are modern silicone (or cork) insoles, which are pleasant and comfortable even in the hardest, most unworn and uncomfortable shoes. And not only in shoes, but in open shoes.
Orthopedic silicone insoles securely fix female legs, preventing them from “riding” on the main insoles of the shoes.
In addition, such insoles fix the arches of the feet in an exceptionally correct position, which is ideal for the prevention of flat feet and indispensable in the treatment of flat feet or other foot diseases.
It's important to note that silicone insoles are transparent and completely invisible in shoes, they can reduce the size of shoes (there are many options for insoles, select them taking into account the need for this criterion).
But the most important thing is that such insoles relieve stress from the feet, and therefore from the spine, eliminate leg fatigue, and allow you to move in shoes longer, further, and with greater comfort.
The instructions for the insoles are also simple - just glue them to the main insole of the shoe.
Also among the devices with orthopedic properties for shoes are:
-
for midfoot support.
-
– for high-heeled sandals, sandals or other open shoes.
A good option for a girl with longitudinal flat feet. -
.
Well-springy insoles relieve stress in the feet, and absorbent properties protect the feet from the effects of increased summer sweating. -
especially for open/dress shoes. Comfortable and useful for quickly fatigued legs from walking and painful sensations from wearing shoes.
The arch supports are designed to be anatomically correct, which greatly alleviates the condition of flat feet. 
-
with acupuncture properties.
Silicone pads in shoes to reduce the load on the feet
Women's legs look much more graceful in heels, no one can argue with that. But high heels when worn for a long time, they negatively affect not only the joints of the legs and spine, but also cause significant discomfort. There is no woman who would not exhale with relief when she kicks off her shoes at home and climbs into her slippers.
They will help reduce the load, relieve leg fatigue, make wearing shoes with heels more comfortable, and provide high-quality shock absorption even in hard office shoes. silicone ear pads. Many girls probably already have such magical pads, transparent and unnoticeable (and more than one pair).
But not everyone knows that there are still...
Straps on new shoes and sandals always add grace, but narrow and stiff strips of leather (or other) straps are always a new peeve.
However, in this case, manufacturers have already come up with a life-saving remedy. Namely, silicone stickers on narrow straps that prevent the straps from digging into the skin and rubbing calluses.
Like silicone inserts, these strips have an adhesive backing that provides a tight and secure fit on the inside of the straps.
Modern followers and traces: not only “for grandmothers”!
Among the main functions of footwear and footwear are hygiene (without them you won’t be allowed to try on shoes in a store), protecting your feet from calluses and blisters, as well as “disguising” an old pedicure that you haven’t had time to fix.
Certainly, modern manufacturers They no longer only offer those “grandmother’s” footprints that stick out from the summer slippers and shoes of most pensioners. Modern heirlooms can be a real work of art, and they are not only not hidden, but even put on display!
Followers can...
- Completely cover the entire foot (like sports low socks).
- Cover the entire foot except the toe.
- Cover the entire foot except the heel.
- Cover only the toe (like choreographic shoes with elastic bands).
- Cover only the area between the toe and the middle of the foot. Such models of footwear in the form of narrow stripes are very popular among girls wearing new sandals. If the material rubs and the sandals are not worn in, then invisible marks hidden from view will be a real salvation.
Modern followers are...
- With silicone relief
(pimples, stripes, etc.) on the bottom so that the foot does not slip in the shoe.
- Any color, pattern and texture.
- With pads
, reducing pain and fatigue in the legs, and increasing shock absorption.
- With absorbent effect.
- Openwork-lace and “mesh”
».
- Fantasy, colorful
with different decor.
Shock-absorbing insoles for high-heeled shoes
Silicone shock-absorbing insoles, as the name implies, serve primarily to cushion and absorb shock when moving due to the air cushion inside.
These insoles can be selected for shoes with heels of any height. The ultra-soft material will reduce pressure on the heel and ball of the foot, and thanks to the translucency, they can even be worn in open shoes.
Among the models of such insoles you can also find…
Big Toe Covers/Braces
According to statistics, every second girl is familiar with it. And in a situation where it's twisted thumb legs and Hallux Valgus occurs, special pads come to the rescue, allowing you to not interrupt the correction even in the summer, when wearing shoes. Silicone clamps allow you to protect the joint from excessive friction, as well as correct its position and gradually correct and reduce the curvature of the thumb.
Bursoprotectors with interdigital partitions are also available on the market. Unlike clamps, they are worn on 1-2 fingers. 
Summer types of insoles: to prevent your feet from sweating
When the heat sets in, the problem of sweating feet becomes almost the most pressing problem, and not all summer shoes provide the necessary protection from odors, and some even enhance odors.
There is salvation in this case too! There is no need to hide your removed shoes, blush for the smell and waste family budget for deodorants for feet and shoes.
The situation will be corrected with a “light movement of the hand”...
These finger pads, made of soft gel material, reliably protect delicate skin fingers from calluses, chafing and damage. An ideal option if your skin is too dry and painfully cracks between your fingers, as well as if you have calluses that cause pain when you rub one finger against another.
Toe caps are completely invisible in shoes and are almost invisible when wearing sandals due to their transparency. The cap is suitable for any finger - except for the thumb, which, of course, needs its own finger cap in size.
All adhesive-based insoles are glued only to clean shoes. Before gluing the insoles, the shoes must be washed with detergent, dried, and only then the insoles must be glued. Only then will the insoles last a long time. Over time, if the insoles no longer stick to the shoes, they can be peeled off and washed in warm water and detergent. Place on a flat surface with the adhesive side facing up. The insoles will dry naturally and begin to stick together again. After which they can be glued again to clean shoes.
They stick to both open and closed shoes. Before gluing on the insoles, it is recommended to place them under the balls of your feet, put on your shoes and try to walk around a little. If you feel that the insole provides comfort, then you can glue it. If you are uncomfortable, then try to move it a little and determine a comfortable place, and then glue it to this place.
Sticks to clean shoes. If you have half-insoles, then in this case it is a little more difficult to find a comfortable position than in the previous option. Since half-insoles have an instep under the arch of the foot, they must be placed correctly so as not to feel discomfort when walking. Place the insoles under the arch of your feet first, and then line the insoles up under the balls of your feet. Try to walk around, if it’s comfortable, then glue the insoles to the same place. If you still don’t, then try, experiment, but don’t stick until you find a comfortable location.
Suitable for both open and closed shoes. Insoles are mainly used in high-heeled shoes. When purchasing shoes you must Special attention pay attention to the instep of the foot (arch). The foot should fit completely into the shoe, there should be no space between the shoe and the arch of the foot! If your leg does not rest, then it is possible that you will feel discomfort when walking for a long time. If you happen to have such shoes, then the matter can be corrected with insoles that are glued under the arch of the foot to the shoes. There are two sizes of these insoles - large and small. If you have a large space between the arch and the shoes, then large ones will suit you; if it’s small, then small size insole Again, before gluing the insoles, you need to find a comfortable position and then just glue them onto clean shoes.
They stick to the inside of clean shoes, in those places where they rub. But keep in mind that there should be a little space in the shoes so that there is room to stick the circles. If your shoes are too small and you glue insoles, then you will feel discomfort; the shoes will no longer rub, but will press. Silicone circles can be cut to fit your shoes to suit your needs. It is not recommended to re-glue.
You need to cut it to the required length. They are glued to straps, ribbons, and shoe fasteners. If the sandals have decorations that rub the foot on the inside, then stripes are also used in this case. But, as experience shows, the adhesive base of the strip does not last long. Silicone strips constantly get touched when walking, dust gets on them and they stop sticking. Since the surface of the strips is very small, over time they may fall off and your shoes will rub your feet for the rest of the day. To avoid this, glue the strip immediately with super glue or shoe glue.
Glued to the back of shoes. Before gluing on the insoles, wash and dry your shoes thoroughly. Please note that your shoes should not be too small, otherwise, when you stick on the insoles, the shoes will become even smaller. It is recommended to glue the insoles under the top of the heel of the shoe. Remove the film from the insoles and glue them in one go. Press the insoles well with your fingers. Do not re-glue insoles into other shoes. It is recommended to immediately glue the insoles with super glue or shoe glue on the sides of the insoles. The heel of the shoe is the most affected part of the shoe, so it quickly loses its grip. Every time you put on your shoes, hold the insole at the back so as not to “scratch” it with your foot.
. Before sticking, you need to determine a convenient location. The insole has a rise in the middle. First, you need to adjust the instep of the insole to your instep, then align the back of the insole with the front. Try walking, if it is comfortable, then remove the film from the insoles and stick them on the clean base of the shoes.
The modern way of life is designed in such a way that most of the time we are constantly running somewhere: from work to work, to school, to the store, to pick up our children from kindergarten. At the same time, the main burden from an active lifestyle falls primarily on the spine and foot.
This is especially true for women who always like to look at their best, and in the literal sense of the word - heels require a lot of effort from the musculoskeletal system.
In short, we spend 15 out of 24 hours in shoes. Therefore, it is extremely important to choose comfortable shoes.
The financial side of the issue does not always allow you to purchase expensive shoes with existing insoles and arch supports. So insoles have to be purchased separately. IN last years Silicone insoles are especially popular.
What is their difference and why are they better than felt ones or any others? Let's take a closer look at these questions.
Silicone insoles: what are they and why?
First of all, let's pay attention to the material from which they are made. Silicone is an artificial heat-resistant material with increased softness and plasticity. The structure of the material is such that it rarely breaks and deteriorates, and the low threshold allergic reactions is its undoubted advantage.
What is its advantage for the foot?
Yes, simply that it does not slip. In addition, softness and elasticity reduces the load on the legs, since the foot does not rest directly on the sole, but smoothly springs. It also has a beneficial effect on blood circulation in the lower extremities - those who walk in heels know how their legs swell during the day.
Such shoe insoles relieve additional stress on the feet, eliminating discomfort or pain during intense walking, for example, when the heel or bunions may hurt from a whole day of running back and forth. They also reduce the stress on your lower limbs if you have to stand for a long time.
They are an indispensable attribute of shoes for those who wear heels. As you know, in this case, the leg first falls on the toe, and only then on the entire foot. This puts a lot of pressure on thumbs, lumps form, and from them the feeling that the sole is simply on fire.
Good for corns. Necessary for people suffering from arthrosis and bursitis. In addition, silicone absorbs moisture well, so for people with increased sweating they will also become indispensable.
So, the properties of silicone insoles:
The elasticity and thinness of the material make it possible to insert open-type silicone insoles into shoes without loss of appearance.
Another irreplaceable advantage is protection against calluses.
Types of insoles
Since silicone is a universal material, today a huge selection of insoles and separate linings have been developed for each part of the foot.
Among them:
How to use silicone insoles to reduce shoe size?
This option is considered to be a heel pad and silicone pads.
They are installed for the following purposes:
To make your boots a little smaller, use a cup-shaped heel pad. But it should be glued well with superglue.
Gel pads may or may not contain a ready-made adhesive base. If you are lucky enough to purchase one with glue, then it is worth remembering that the shoes should first be thoroughly washed inside with soap and detergent using a cotton swab or sponge, degreased, and only then glued.
There are never too many summer shoes, just like any other, in principle. But it is in the summer that each of us spends more and more time outside the home and is often on the move. Sometimes our flip-flops, sandals and ballet shoes simply cannot withstand the increased load, which is why they are sent to the landfill earlier due date. But why not give them a second chance? After all, shoes can always be “treated”, after which you can wear them with pleasure again. What's so bad about these sandals?
At first glance, you can’t tell that these shoes have undergone a major overhaul. Bright and stylish sandals look quite new, but in fact they have already been “running” a lot throughout last season.
So how can you bring such shabby shoes back to life?
First, you need to choose the fabric for finishing the straps. It must be elastic (it is better to use stretch), because a different quality of material will not allow it to accept the finish the required form. Secondly, you should test it for strength (rub it with something or just give it a good beating and stretch it). Only after this will you see how the material carries the load. For example, in in this case the selected fabric is very rubbed off the face, and its shiny surface simply crumbles. But the wrong side showed itself well, and besides, it has saturated color and smooth structure.
In addition to the fabric of the desired color, you should also choose the material for the insoles. It must be durable, because a soft structure (fabric, for example) can easily be damaged and stained. It is better to take matte PVC film, which is usually used for suspended ceilings. It will be easier to keep it clean and intact.
Also prepare shoe glue, polymer contact glue for leather, thin openwork braid in the color of the insole (2-3 meters), thread No. 30 plus a sewing needle, ballpoint pen and scissors.
First, start working on the inner lining of the shoes, creating durable insoles for them. Remember that to cover the left sandal, you need to trace the right one and vice versa, and always on the wrong side of the PVC (then turning the cut insole over, you will get the correct part in a mirror image).
The insole should be cut with a hem allowance, otherwise it will ride up when walking. Lubricate the inside of the shoe with contact glue and insert a new insole there.
Carefully trim off the excess, freeing up the junction of the straps with the sole.
Already now (against the background of the new insole) it is clearly visible that the upper part is badly faded and worn out.
Now you need to give the insole time to dry and work on the upper partitions of the sandals. Unsuitable ones should be replaced, the rest should be covered with fabric.
For finishing the elastic, you should prepare the fabric with a small margin, because when put on, it should stretch without obstacles. Sew this piece only along the edges, leaving the center free.
Next, finish the sole by gluing the edges of the insole with shoe glue.
It should set quickly and firmly, so you won't have to wait long.
All that remains is to hide this uneven cut with braid. It can also be used to decorate sandals by gluing small fragments to the straps.
This is how you get new sandals from old ones! Of course, it is not recommended to wear them in rainy weather, but they will cope with everything else. And if you work in a bank, office, store or any other place where you don’t need to move a lot, then such removable shoes will simply become irreplaceable. It lasts indoors for a very long time and will always look neat.
No matter how high-quality and expensive shoes you buy, sooner or later they will wear out and sometimes even tear. Most people in this case resort to the help of a specialist. Some people prefer to save on repairs and solve the problem themselves. About 80% of all modern shoes produced using adhesive compounds. The repair also uses glue, which has almost completely replaced threads and nails. Professionals say that currently adhesives are the most in the best possible way provide a reliable and strong grip. It’s difficult to say for sure which shoe glue is the best. This depends on the type of product and the specific task.
Without experience, it is impossible to choose the right glue for shoes. Experts recommend using products only famous brands. Let us list the advantages of adhesives:
- reliability and durability;
- water resistance;
- frost resistance;
- the thickness of the adhesive elements should not greatly affect the strength of adhesion;
- lack of rigidity;
- maintaining the integrity of adhesive materials;
- elasticity of seams.
With these parameters, the glue will effectively cope with its task. Of the variety of adhesives available on the market, we have selected the highest quality and most reliable ones. Feedback from real users helped us with this.
TOP 10 best adhesives for shoes
10 Contact
Best price
A country: Russia (manufactured in China)
Average price: 37 rub.
Rating (2019): 4.6
More than 10 years ago, the domestic company Rosel developed an excellent adhesive for shoes. In 2002, the range included only instant adhesives, however, in 2008, contact and epoxy adhesives went on sale. Today, Contact is second on the market in terms of sales, second only to Moment. Moreover, the price of the first is much lower than the second.
The contact is suitable for bonding leather, rubber, ceramics, porcelain and many other materials. They can repair shoes very well. The glue perfectly fills cracks and gaps. The contact fulfills its functions 100%. If you follow all the recommendations indicated on the packaging, the substance sticks “tightly”. Buyers speak only positively about it.
9 Eva
Economical consumption
Country: Taiwan
Average price: 100 rub.
Rating (2019): 4.6
Eva shoe adhesive fully lives up to the characteristics declared by the manufacturer. Therefore, it deserves a place in our ranking. Consumers cannot find a single flaw. The glue “tightly” seals corner and side cuts and tears on the fold. Stays on shoes for a very long time, protecting the damaged area from repeated damage.
"Eva" is waterproof. It doesn't leak in the sun. Even oblique cuts are sealed with a bang. Moreover, the place of the cut after treatment with glue is almost invisible. Buyers recommend Eva as the best glue that does its job perfectly, is used sparingly and is inexpensive. The shelf life is 2 years.
8 Second
The most popular glue
Country: China
Average price: 85 rub.
Rating (2019): 4.7
One of the most purchased and the best means for gluing shoes. Instantly “grabs” the necessary parts of the surface. The glue will not leave stains and will dry quickly. Shoe repair specialists actively recommend using Secunda. After use, the shoes can be worn different conditions without fear of new damage. The product is resistant to alkali, grease and moisture. It consists of polyurethane, acetone, methyl ethyl ketone and various additives. It has a helium consistency and transparent color.
The tube is small and convenient, users note easy use and quick action. In addition, the ridiculous price suits all buyers. A second will firmly seal the sole on long time. The effectiveness and versatility of the glue pleases customers. After complete hardening, the product has no odor or color. It can also be used in various household tasks: gluing together interior elements or bringing to life creative ideas. Despite all the above advantages, Secunda has negative sides– uneconomical use and characteristic odor.
7 Moment Marathon
Fast bonding
Country: Ireland
Average price: 149 rub.
Rating (2019): 4.7
Henkel has made a gel adhesive specifically designed for shoes. Its main advantages are efficiency, economical consumption and ease of use. The gluing process occurs quite quickly, which saves time. The tube contains only 3 grams of the substance, however, it lasts for a long time.
The glue is waterproof and elastic, and it also has high strength. Thanks to its consistency, it does not flow. This makes it easy to use. A special thin spout allows you to accurately apply glue to those areas where repairs are required and easily control the dosage. User reviews indicate good quality"Moment." They say that the glue is excellent not only for repairing shoes, but also for other repairs of leather goods.
6 DoneDeal
Excellent gluing of dissimilar surfaces
Country: USA
Average price: 185 rub.
Rating (2019): 4.8
An adhesive that is suitable for almost all materials. It can be used to seal air mattress, boats, camping equipment, shoes, sports equipment and more. He connects things of dissimilar origin - rubber with metal, plastic with wood, glass with leather. The product perfectly withstands temperature changes and holds reliably at low and high temperatures - from -45 to +105 degrees. The sealant best seals the sole or upper part of the boots. A strong connection will allow you to wear the shoes for more than one season.
Glue should be applied to both surfaces. Then he will “grab” quickly and reliably. Required condition is a thin layer. Within 24 hours the consistency completely hardens and dries. Heating the glue to a temperature of 70-80 degrees will help speed up the process. Customer reviews are mostly positive. They note the convenient tube and easy use. In the shortcomings column you can find comments about a strong smell.
5 UHU SCHUH & LEDER
Durability of adhesive seams
Country: Germany
Average price: 167 rub.
Rating (2019): 4.8
A reliable product designed for gluing hard and soft materials. After application it dries quickly. One of the most significant advantages is the glue’s resistance to moisture. When exposed to water, it will not soften and will not lose its basic properties. It is most often used for shoes. UHU SCHUH & LEDER does not dry out for a long time and holds firmly, even at extremely high temperatures - up to +125 degrees.
The main rules before use: it is imperative that the shoes are clean and dry. It is recommended to apply a thin layer, if necessary, several times until a barely noticeable film is formed. Users note that the glue does not leave unwanted stains. In addition, it holds well on glued surfaces of paper, leather and others. In addition to all the listed advantages, the product has some shortcomings that can be found in the reviews. The disadvantages include not the most convenient tube, as well as the strong smell of glue.
4 Desmokol
High reliability
Country Russia
Average price: 175 rub.
Rating (2019): 4.8
Shoe glue, which is praised for its quality and reliability. The composition is based on polyurethane resins. Thanks to this, it quickly connects surfaces various materials and holds them firmly for a long period of time. Even hard parts of shoes are subject to Desmokol. Often, it is used to seal the top of boots or soles. The product is also suitable for plastic, metal or glass. It has water-repellent properties and plasticity.
Before use, you must prepare the product for application. It is recommended to clean the shoes from dirt, remove the remains of old dried glue and degrease the desired part of the surface. It is very important to apply the product in a thin layer and wait about 10 minutes until it dries. If necessary, the procedure should be repeated until a film forms. The glue does not require additional compression; it will be sufficient to firmly connect the desired parts. Buyers are satisfied with the purchase and readily recommend this glue. The only downside is the unpleasant smell.
3 Nairit 1 (88-P1)
Better durability
Country Russia
Average price: 299 rub.
Rating (2019): 4.9
One of the best adhesives for shoes is Nairit. Numerous customer reviews speak about its effectiveness. Thanks to a wide range of glued materials, Nairit can be used in various household areas. The adhesion strength depends on the operating technology and the specifics of the material.
During operation, Nairit forms a waterproof, elastic seam of high strength. If you need to treat a large area, Nairit glue is an indispensable assistant, since the layer applied with it remains sticky for a long time. The substance is safe to use. It does not contain any narcotic solvents such as toluene. Glue can be used to process most materials in any combination. It can be leather, rubber, fabric, wood and much more. Bonding methods - hot and cold. With the first option, the product can be used after 4 hours, with the second – after a day.
2 Polyurethane Seam Grip
Dries quickly. Bonds securely
Country: USA
Average price: 780 rub.
Rating (2019): 4.9
A universal adhesive that is mainly used for gluing leather, rubber, fiberglass, and is also suitable for shoe repair. After use, the product dries quickly enough and becomes elastic, which allows it not to crack or dry out. For even application, it is recommended to use a brush. Typically, the product should be left to dry for at least 12 hours. Then it will firmly glue the necessary parts.
This product has earned many positive comments in reviews. This is due to the fact that it performs its function efficiently and is easy to use. Seam Grip will allow you to seal damaged, worn out soles and return your boots to a presentable appearance. appearance. The glue is waterproof, after drying you can safely walk in the rain and not be afraid of new damage. Shoe repair specialists actively recommend purchasing Seam Grip. The only thing that can scare you away is the high price.
1 KENDA Farben SAR 30E
Best quality
Country: Italy
Average price: 500 rub.
Rating (2019): 5.0
Italian manufacturers have developed the highest quality glue. Today it is used in shoe production and leaves its mark only best impressions. It is mainly intended for gluing leather materials with any other types of them. It also exhibits its properties well when applied to wood, glass and other surfaces. Long-term fixation of parts is not required - the glue “grabs” the necessary parts in a few minutes. It should be used at a temperature not lower than +17 degrees.
Degreasing and cleaning the surface is recommended before use. The product is applied in 2-3 layers at intervals of 10 minutes. The shoes will be ready to wear within 4 hours, provided the product is heated to a temperature of 90 degrees. KENDA Farben SAR 30E is resistant to cold and heat, and also holds up well when exposed to water. Buyers note that the glue does not have a distinct odor, which is a definite plus. But they consider the high cost to be a disadvantage.
