How to cleanse an emerald of negative energy. How to clean gold with stones at home

polished surface becomes dull over time

Very often, the facades of houses, offices and apartments are faced with natural stone. This finish is considered durable, and proper care can last for decades.

But over time, the polished surface begins to lose its shine, scratches, various stains, and cracks appear. In order for natural stone cleaning to be effective and safe, it is necessary to choose the right care products.

There are 3 different cleaning methods:

1. using acids and acidic compounds;
2. combined methods;
3. sandblasting.

Cleaning natural stone using acids and acidic compounds.

• Cleaning natural stone using acids and acidic compounds is used only for outdoor work. The method is characterized by its low price and good results on moderately dirty surfaces (for example, residues of lime, mortar, and rust are well removed). Organic acids are used, as well as hydrochloric, phosphoric and others. The surface to be treated must be moistened generously with acid, previously diluted with water, and left for some time. After this, rinse with clean water. Use this method with extreme caution when cleaning marble and limestone.
• Cleaning natural stone using alkali. Used in case heavy pollution. Has a degreasing effect. Particularly effective for removing organic contaminants, traces of dirt and soot. Suitable for limestone. Should not be used to clean rust or cement stains.
• Cleaning natural stone using pastes. Used to remove the following contaminants: mold, algae, moss, etc. Suitable for removing grease and oil stains, paint, resin. The method of application is to apply the paste to the surface to be treated for up to three days.

Cleaning natural stone using a combined method

Most often it is already used when the surface needs to be further cleaned by other methods. In this case, grinding is used with both mechanical abrasive and diamond tools. The main disadvantage of this method of removing contaminants is that it can cause damage to stone products.

Using sandblasting method

This type of cleaning is used only for external work. At this method Contaminated surfaces are treated with special fine sand under high pressure. It is necessary to carry out cleaning away from glass, wood and plastered surfaces, as this method can lead to damage.

• always carefully read the instructions for use to avoid damage;
• start cleaning the surface from dirt with a less concentrated solution and only then with a more concentrated one;
• test the product on an inconspicuous area.

Surely, each of us knows that stones have certain properties, for example, they can heal or protect against the evil eye. Since ancient times, stones have been used as talismans, amulets and amulets. That is why, absorbing human energy, precious and semi gems need not only mechanical cleaning, but also in energy. After such cleansing, they are freed from negative information and their healing and magical properties are intensifying.

How to cleanse the energy of a stone?

Produce energetic cleansing of precious and natural stones some rules must be followed. For example, when purifying stones with fire, the ritual will depend on who the stone belongs to, a woman or a man. For cleansing above the candle flame the stone is suspended on a chain over the fire and moved in a certain direction. If the stone belongs to a woman, then the circles should be made counterclockwise, with male stones the opposite is true.

Energy cleansing of stones can also be done using sunny or moonlight. To do this, the stones are laid out on a cloth in a space exposed to the rays, and left for several hours. This will not only cleanse the stones, but also charge them with the energy of the Sun or Moon, which will give them greater strength and effectiveness.

Has great purifying power running water, especially cold spring or spring water. It would be ideal if you could find its source. Such water takes with it not only the negative, but also the positive energy of the stone and leaves the gem in its original state. energy form. A mineral purified in this way will have special powers. But even running tap water will have a beneficial effect on the energy of the stone.

Earth It also has cleansing energetic properties, and therefore stones or jewelry can simply be buried in some pleasant place for several days. All negativity will go away in this way, and the stone will delight you with its beneficial properties for a long time.

Another view energy cleansing stones associated with cleansing properties of salt. To carry out such cleaning, you need to fill the crystal container with salt (preferably sea salt), put a stone and sprinkle salt on top. This cleansing should last 3 days. You can also clean the stone in a saline solution of water; this cleaning only takes a few hours. The water must be “live”, preferably spring or spring water.

Carrying out cleaning stones from negative energy, you need to tune in accordingly, free your thoughts from current problems, negative emotions and concentrate on your goal. You can even say a prayer during the ritual, in this way your own energy will be cleansed, you will receive a charge of positive energy that will displace all negativity.

Jewelry made from natural stones, especially those without a frame, carry the strongest natural energy. And it is in your power to make it even better and cleaner.

Surely, many women will find jewelry with precious stones in their arsenal of accessories. With their help, every representative of the fair sex will be able to emphasize her social status in society, and at the same time look simply divine.

Over time, precious stones lose their former shine and begin to fade little by little, which causes anxiety in their owners. In such cases, you need to have information on how to clean gemstones. Knowing a few simple tips, you can return precious stones to their former attractive appearance and maintain their shine longer. In addition, such a procedure cannot be carried out at home without the help of specialists.

List of necessary ingredients for cleaning gemstones

If you decide to clean gemstones at home, you will need to have the following products:

• liquid soap;
• sea ​​salt;
• baking soda;
• gin;
• vinegar.

When cleaning precious stones at home, you should be extremely careful and careful not to damage the structure of the stone and avoid the appearance of cracks. It should be remembered that cleaning of gemstones should be carried out regularly, which will remove particles of sweat and cosmetics from the stone itself.

So, when starting to engage in the procedure of cleaning precious stones, you should remember that experts allow the use of salt. To do this, warm water is poured into a ceramic bowl, in which 1 teaspoon is dissolved. sea ​​salt. After this, you need to place a stone in the resulting solution and leave it for half a day. Then it should be thoroughly rinsed in running cold water and wiped using a soft, clean piece of cloth.

When cleaning precious stones, you can also use one more, no less effective way. To do this, we need a deep container into which salt is poured. Then you should put a stone in this salt and leave it overnight. The next morning, the gemstone is washed in running water and polished using a soft cloth.

If you plan to clean precious stones - opal, apatite, ruby, moonstone, lapis lazuli, sunflower, peridot or malachite, you should prepare a soap solution and place the stone there. Then take a soft brush or a special brush and remove dirt from these precious stones.

If a greasy coating appears on the pearls, you should take potato starch and rub the stone with it. Turquoise can be cleaned well in a weak solution ammonia or in a container of water.

To make your gemstone still sparkle, you can clean your gemstones with washing powder solution. This cleaning method is acceptable for beryl, sapphire, emerald, topaz, quartz, aquamarine, and diamond. You can replace washing powder with 50% bleach, table salt in an amount of 30 grams, dissolved in 100 grams of water. Then all this is filled with 500 ml of water and the solution is ready for use.

If you find that dirt has accumulated on the inside of the stone, then to clean the gems, it is recommended to wrap a piece of cotton wool around a match, moisten it in a solution of ammonia with magnesium or glycerin and carefully remove it.

If all your attempts to clean the gem from dirt have been in vain, you should resort to the services of craftsmen who can perform this work using ultrasonic cleaning. This method can be applied to sapphire, rock crystal, amethyst, as well as rubies, citrine and tourmaline.

Cleaning stones

Regardless of what the gem is used for (for medicinal, magical purposes or as decoration), it needs to be cared for and sometimes cleaned. When you buy a stone, you need to clean it. Keep it under running water for a few minutes. It is better, of course, if possible, to use natural spring water.

Minerals that belong to the quartz group can be placed in a glass bowl with water and kept overnight in the freezer. You can place stones and products made from them in a vessel with water. The water, when frozen, will remove the dirty information from the stone, and it will be cleansed. In this way, you can clean both stones that you previously wore and new ones - purchased or given as a gift. In the same way, not only newly acquired stones are cleaned, but also those that you already have. This should be done at least once a year, and health stones should be cleansed once a month on the waning moon.

The general rule for cleaning stones is this: it is always better to clean all stones in the last three days of the lunar month (28, 29, 30) - before the new moon. During the full moon, stones accumulate energy and after cleaning they should have time to restore their own energy. To store stones, it is best to use bags for each stone separately. The bag should be silk or cotton, or linen. In such packaging, gems can be stored in one box or box.

The following cleaning and updating methods can be distinguished: natural stones(you need to clarify - not all methods are suitable for certain minerals). Precious stones have different properties and require an individual approach to cleaning. While for some it is appropriate to use a soap solution, for others it can be disastrous. Improper cleaning can ruin your favorite piece of jewelry.

1. Cleaning with water - the stone is kept under running water (from the tap) for several hours. It’s better to put it in a bag and into a spring, tie the bag so that it doesn’t get carried away. Or just pour spring water into a glass and put a stone there.

2. Cleaning by the sun - first wash the stone with water and place it in bright sun for 30 minutes. This is both cleansing and charging the stone.

3. Cleaning with salt - bury the stone in salt for 3-4 hours, then throw away the salt.

4.Cleaning with a saline solution of water - immerse the stones in salted water poured into a crystal bowl. It can also be used in other containers, of course.

5.Cleaning with soapy water - prepare a warm soapy solution, pour it into porcelain or crystal dishes, and leave the stones in the sun for about two hours,

6. Cleaning with earth - bury stones (this applies to cleaning precious stones) in the ground overnight.

Cleaning with natural sea water - wash the crystals with sea water and leave in it for 3 hours.

From time to time it is useful to expose all stones to sunlight for several hours or days. This especially applies to those stones that you constantly wear. But - be careful - some stones change or lose color in the sun.

You can just wash the item with water every day - the stone will only get better.

If the hardness of the stone is above 5 (sapphire, emerald, diamond, topaz, ruby, aquamarine, quartz, ordinary beryl), then cleaning in a solution of any washing powder using a brush is allowed. An exception would be jewelry that uses soft metal, for example, silver. Gems framed in gold or platinum will respond well to such cleaning. After cleaning, rinse off the remaining solution with distilled water.

For cleaning stones, a solution consisting of 120 g of baking soda, 30 g of table salt and 50 g of tooth powder, dissolved in 0.5 liters of water, is suitable.

Gemstones are often very fragile and can easily crack if handled carelessly. This is especially true for those stones that have inclusions. Therefore, if you want to clean peridot or emerald yourself, be very careful! A wrong movement and a piece may break off from the stone.

Gemstones with a hardness level below 5 should be washed in a milder environment, such as soapy water. Such stones include - apatite, ruby, opal, sunflower, Moonstone, chrysolite, lapis lazuli, malachite.

Ruby, alexandrite and sapphire can be cleaned in a soapy solution with ammonia. The proportions of the solution are 0.5 cups of water, 1 teaspoon of alcohol. After cleaning, rinse the gems with warm water. Amethyst, rhinestone and citrine should only be cleaned using ultrasound. Turquoise is a capricious gemstone. It cannot be cleaned with aqueous solutions; their influence can easily cause the stone to lose color. Turquoise jewelry should not be exposed to sudden temperature changes or exposure to acidic or soapy solutions. To remove heavy stains, alcohol or distilled water can be used. To restore shine, a piece of flannel fabric or dry suede will do - you can polish turquoise with them yourself. Very often dirt collects under a stone. You can remove it with a match and a piece of cotton wool. Moisten cotton wool with glycerin or a solution of magnesia and ammonia. Use gentle circular motions to rub into recesses and surfaces. If there are still particles of dirt that cannot be removed, contact a jewelry cleaning professional. May need professional cleaning using ultrasound. True, not all stones can be cleaned with ultrasound.

For WET CLEANING, dissolve a teaspoon of salt in a cup of water. For better dissolution, the salt can be poured with warm water, but then the solution must be allowed to cool before immersing the stone in it. Rinse in glass or ceramic containers. Plastic and metal tend to transfer some of their properties to water. Immerse the stone in the solution overnight and then rinse with running water.

For DRY CLEANING, you will need a container deep enough to fill with enough salt to completely cover the stone. Place the stone in the salt with its top facing Mother Earth and leave it there overnight.

Be very careful when cleansing with salt. May happen chemical reaction, which will damage the crystal lattice of the stone. Salt will cause the stone's polish to fade and some may change color.

You can use alternative way cleansing with salt. Place the stone in a small glass container and place it on a dish covered with salt. Although the stone will not come into contact with the salt, it will have a cleansing effect on the stone.

CLEANSING WITH MOON LIGHT.

This process takes longer, but if you want to activate the moon's energy, it's worth the wait. Find a window sill in your house that is flooded with moonlight during a full moon, at least for several hours. Place the stone on this windowsill for three nights, starting the night before the full moon. It’s even better to put it outside where the moonlight won’t be blocked by the glass.

If the stone was used to remove negativity, place it in a vessel of salt water and place it in a place where the light of the waning moon will fall on it for several nights. As the moon wanes, it will take away all the negativity with it.

CLEANSING WITH HERBS/FLOWERS.

This gentle method of cleaning stone involves immersing it in a container of dried herbs or flower petals. This type of cleansing can be combined with moonlight cleansing, but if used separately, it will take about a week.

More in a fast way cleaning stones is fumigation. In a fireproof bowl, light some sage, cedar, or juniper, then pass the stone through the smoke. This does not require thick clouds of smoke; a faint haze is sufficient. To calm the energy, you can add a few lavender flowers.

CLEANING WITH WATER.

Running clean water removes information very well; after the water, place the stone to dry next to a burning candle, it turns out very effectively.

Crystals that should not be cleansed with water, either fresh or salt:

astrophyllite, heulandite, gypsum, rock salt, kyanite, muscavite (a type of mica), selenite, seraphinite (clinochlore), stilbite, uvarovite, celestite, chermigite (geyserite), fuchsia slate, chrysocolla,.

Water dissolves these minerals and can affect them physical properties. It is best to clean all these minerals with candles, i.e. fire or any other dry method. Crystals that should not be cleansed with salt water:

aquamarine, apophyllite, belomarite, turquoise, hematite, labradorite, calcite, cacholong, lapis lazuli, malachite, onyx, opal, pyrite, rhodonite, rhodochrosite, carnelian, ulexite, fluorite, eudialyte, amber.

Salt water affects their physical properties.

After cleaning, the mineral can be recharged with a generator crystal, crystal druses, and pyramids.

Gold is rightfully considered a noble metal. But despite this, gold items must be washed and cleaned. Solid chains and bracelets can be easily restored to their original appearance. But how to clean gold earrings with a stone, for example? Let's find out together how to care for such jewelry.

Basic Rules

Cleaning gold set with stones is not an easy task. You need to be extremely careful; the wrong processing method can ruin the jewelry.

1. Do not use sharp tools to avoid scratching the precious stones.
2. Do not put the accessory in water, if the stones in gold jewelry are held in place with glue, they may simply fall off.
3. Using a piece of flannel fabric You can remove dust and dirt without additional manipulation.

• Clean your jewelry regularly. Regardless of the frequency of wear, gold inlay jewelry should be cleaned once a month.
• Contact a jewelry store. If gold with stones is very expensive and you are afraid to process it yourself, it is better to take it to a jeweler. The price of such a service is quite affordable, and the risk of damaging the products is minimal.

Cleaning methods

You can understand how to clean this or that product only by finding out the origin of the inlays. Some inserts are completely unsuitable for home processing. These include:

• amber,
• beryls,
• pearl,
• coral,
• lapis lazuli,
• Ivory,
• tortoiseshell.

All jewelry with stones can be divided into three types. I’ll tell you about caring for each of them.

Type 1. Precious inlays

What and how can you clean gold with precious stones at home? The main recommendations are presented in the table:

Image	Insert type
	Recipe 1. Sapphire/diamond These products can be cleaned: Ammonia; Wash in soapy water. Flannel. Sapphire must not be heated.
	Recipe 2. Garnet/amethyst Allowed: Clean with ultrasound. Treat with a soft toothbrush. Wash in soapy water. Garnet and amethyst should not be exposed to sudden temperature changes.
	Recipe 3. Peridot/aquamarine. Can be washed with: Detergent solution. A solution of ammonia.
	Recipe 4. Ruby/topaz/emerald. Allowed: Use warm steam. Wipe with a cotton swab dipped in gasoline. Treat with soapy water. These are very fragile stones, so they cannot be subjected to strong impacts or cleaned with ultrasound.
	Recipe 5. Turquoise/opal At home, such products can be wiped with flannel or velvet. In case of severe contamination, it is better to contact a jeweler.
	Recipe 6. Tourmaline Take liquid soap and prepare a weak solution: 1 tbsp. l. products per 100 ml of warm water. Wipe the resulting liquid onto the decoration.

Type 2. Semi-precious inlays

Many products are decorated with inserts from semi-precious stones. Zircon is considered the most popular. It comes in red (hyacinth), blue (starlite) and yellow (jargon).

Instructions How to restore shine and transparency to zircon:

Image	Recommendations
	Step 1 Line a container with foil and pour a mild soap solution into it. Immerse the zircon product in water for 15 minutes.
	Step 2 Brush the stones with a clean, soft toothbrush. Remove dirt from fasteners and fastenings using a cotton swab dipped in ammonia.
	Step 3 Wipe the mineral and gold with an optics cloth or flannel scrap.

Type 3. Artificial inserts

Gold can be inlaid and artificial stones. Most often these are cubic zirconia and rhinestones (Swarovski rhinestones are especially popular now):

• Jewelry with cubic zirconia are unpretentious and will be able to withstand thorough cleaning of the metal itself.
• But the jewelry with rhinestones washing is not recommended. Wipe them regularly with microfiber.

Let's look at how you can clean cubic zirconia:

Image	Recommendations
	Method 1. Ammonia Soak a cotton swab in ammonia and wipe the product thoroughly. Please pay attention Special attention places where stones are attached.
	Method 2. Toothpaste Apply some toothpaste to a soft toothbrush and scrub the jewelry. Then rinse the jewelry in warm water.
	Method 3. Soda Prepare the solution baking soda: 2 tbsp. l. soda per 200 ml of water. Moisten cotton swab in liquid and wipe the stones and metal base.
	Method 4. Soap Dip a soft toothbrush into liquid soap and scrub thoroughly. Finally, rinse in clean water.

Bottom line

You can restore the color saturation and shine to inlays in gold jewelry yourself. The main thing is to clean them regularly with the right product. The video in this article will clearly show how to proceed. If you have some more recipes in stock, share them in the comments.