Eat tricky way, thanks to which the blade of your razor or razor will become as sharp as before, in just a couple of minutes! Anyone who has used shaving machines at least sometimes knows that after 1-2 uses the machine loses its former sharpness and shaving dynamics, you have to buy a new attachment or endure unpleasant pulling of the hair while shaving.
But if disposable ones can still be updated, then this will not work with expensive nozzles from branded brands, they are not cheap. Fortunately, there is a way to sharpen them, without special equipment, at home. To do this, you will need old jeans and the machine itself with dull blades.
How to sharpen a razor: stage 1
First, dry the machine dry by blow drying it. Take your jeans and place them evenly on the table. Then take the machine and begin to smoothly but evenly move along the fabric of the jeans, using the entire plane of the machine. Swipe 20 times in one direction.
How to sharpen razor blades: step 2
Now change the direction and also move 20 times in the other direction, no longer shaving but stroking them with a razor head.
Sharpening a razor blade at home until sharp: stage 3
That's it! You can blow air out of the lint and try the result! The blade is as sharp as new again.
If only I had known this trick earlier, I could have saved a lot of money, especially with disposable machines that had to be thrown away after a single use. Your friends will probably be interested in learning about this method if you share it with them using the sharing buttons on Facebook and VKontakte below.
Razors, even the most best brands Over time, they become dull, which reduces the quality of the shave. By providing proper care and using our tips on how to sharpen a razor, the service life can be significantly increased. The main thing is to use suitable materials for sharpening so as not to damage the edges, and also to follow the technology.
What is important to know about self-sharpening machine blades
Shaving with a dull edge is not at all uncomfortable, but can lead to inflammation or breakouts on the skin. Blunt edges can be easily sharpened; it is important to correctly calculate your strength and take into account some nuances.
Main subtleties:
- Only disposable razors, as well as replaceable shaving cassettes or cartridges, can be sharpened. With conventional blades, the result will not justify itself, and there is a high risk of accidental cuts in the process.
- It is better to throw away cheap disposable razors or shaving accessories of poor quality (damaged, rusted) immediately, without exposing yourself to the risk of accidental injury.
- Products from trusted manufacturers good quality can be sharpened in specialized workshops. This procedure will be cheaper new purchase, the main thing is to choose a good master.
The advent of safety razors seemed to have solved the problem of dealing with stubble forever. At the same time, disposable machines and cartridges quickly break down, so you have to constantly spend money on purchasing new accessories. You can solve this problem by sharpening yourself, best ways are given below.
Methods for sharpening a razor
The best option would be to purchase a special sharpening device. Externally, it is a small plate coated with fine diamond chips.
How sharpening occurs:
- Apply to the plate a small amount of shaving gel.
- Guide the machine in the direction of shaving movement.
- Repeat movements 25-30 times.
High-quality sharpeners can be purchased from the Razor Pit brand (Denmark), as well as its budget analogue - Zattoch (Ukraine). Chinese fakes, despite the minimum price, do not justify their purpose at all.
We use denim
The original method, which requires a small piece of fabric, can be used ready product- it will not be damaged during sharpening. Place the fabric on a hard, flat surface with the wrong side turned out. The movements are carried out in the opposite direction than when shaving (30-50 times). This method is convenient to use on the road or in hiking conditions.
Leather belt
You can use a trouser belt in a similar way. It must be made of thick quality leather, wide enough to accommodate the entire blade. Sharpening occurs with reverse side belt, the procedure requires 25-30 passes. 
Special pyramid
An original way with a minimum of costs is to use a cardboard pyramid. It must be made to size, and a pedestal with blades fixed on it must be placed inside. A small hole is cut into the body of the pyramid on one side and placed on the south side. The structure should remain in this position for a week, but it is forbidden to move it or touch it with your hands.
Sharpening stone
This method requires some skill, so not everyone succeeds the first time. A stone of uniform structure is used, without inclusions or large particles on the surface. You must first moisten it with water, and then perform 20-30 passes in the direction opposite to the shaving movements.
Sandpaper
Having fine grit sandpaper (over 2000) on hand can also quickly restore sharpness. It needs to be slightly wetted, the movements are similar to the method of using a sharpening stone.
Food foil
Sharpening a razor on a roll of food foil is effective, quick method. To do this, it is better to use the end of a new roll; there should be no dents or deformations on the foil. Repeat the movements at least 30 times, the direction is away from you.
How to sharpen a disposable razor at home with your own hands
Typically, disposable razors are not intended for long-term use, but throwing them away after the first shave is an unaffordable luxury. If you carefully care for the blade and avoid damaging it, the product will last for months without any problems and will help you out in an unforeseen situation.
Basic rules for maintaining and sharpening a razor:
- After shaving, you must thoroughly clean the body of hair and detergent residues. It is best to use warm (not hot) water.
- The machine must be stored in an upright position, avoiding direct sunlight and high humidity. If you need to take the razor with you on the road, the razor must be absolutely clean and dry.
It is most convenient to sharpen a disposable machine using denim or back side belt As a rule, workshops do not sharpen such products, and sandpaper or a stone can damage the metal, which is usually not of the highest quality in such products.
Features of sharpening a straight razor
Razor accessories with an open long blade are not often used when there is a wide range of safety razors. Previously, such an item, in addition to its direct purpose, often served as a weapon for self-defense. To successfully shave with this tool, it is important to choose the right product and learn the rules for its use.
Tips for choosing and sharpening straight razors:
- Beginners should pay attention to products with a wide, rounded blade. This makes it easier to adjust the angle of inclination and makes it more difficult to cut yourself.
- The handle of the razor should be durable, fit comfortably in your hand, and not slip off when moving.
- The opening angle of a good razor is 270 degrees. Closing must be without jamming or distortion.
- It is better to store it in a special case, thoroughly washing and drying it after use.
- The blade must be sharpened before each use using a whetstone or ceramic whetstone. Movements should be smooth, direction away from you, then towards yourself. After a couple of passes, the blade is turned over to the other side and the procedure is repeated.
- After sharpening, you need to straighten the blade with a leather belt. This is necessary to remove possible chips and irregularities on the edge of the blade, which can seriously cut you.
- Before editing, a thin layer of polishing paste must be applied to the surface of the belt. Straighten and tighten the belt, repeat the movements as when sharpening for each side of the blade.
- After shaving, the blade is thoroughly washed to remove product residue under hot water. The razor is thoroughly wiped with a towel and put into its case until next time.
- The undoubted advantage of a straight razor is the almost eternal service life of a high-quality blade.
In our age of availability of goods and even their abundance, helpful advice about sharpening disposable razor as relevant as ever. “Working” tips on how to sharpen a razor with improvised means, as well as rules for caring for razor accessories will help extend the service life and keep the blade longer.
Video
Video on how to sharpen a razor:
Results
- Careful care of your razor will help extend its service life, and sharpening it yourself will save you money on future purchases.
- In hiking conditions, the method with denim or a belt is suitable. For home sharpening, it would be best to buy a special device, a stone or fine-grained sandpaper.
- Straight razors are more difficult to use and sharpen yourself. At the same time, when proper care Such a blade is practically eternal, which will more than pay for all expenses. We also recommend that you familiarize yourself with facial hair removal for women.
Among all the variety of shaving devices, the most effective is the machine from a regular razor. However, this product has one big drawback: it quickly becomes dull and the cassette has to be changed frequently. For owners of razors, several effective home methods for sharpening them have been invented. This is discussed in more detail below.
Do I need to sharpen my razor myself?
The following facts support a positive answer to this question:
- If you take it yourself, you can extend the life of the machine by approximately the same period of time.
- Such actions allow you to save significantly, because... When buying a replacement, you are spending a significant amount of money. And sharpening helps to postpone the trip for new accessories by 2-3 months.
- In some situations, it is problematic to buy a new pack of replacement blades. For example, when you urgently need to shave. To do this without being distracted by going to the store, you just need to sharpen the blades.
Using jeans: sharpening from scrap material
For those who don’t know how to sharpen a razor and need to shave urgently, old jeans will help solve the problem. Processing with this material is simple and accessible to restore the sharpness of the device.
Such sharpening of shaving blades will require a little more time than when processing using special devices. However, the result will be at the same level. To work, you need a round piece of jeans and a dull blade.
Additionally, you need to use a foil sleeve, a ruler, or take another flat wooden object. The width of the latter should be less length cutting part of the razor. This condition must be observed, because The edges of the blade contain ridges that may interfere with sharpening the razor.
The sharpening process is as follows:
- The denim material is placed wrong side up on any smooth surface.
- Place a block (cardboard or ruler) under the fabric. In this case, the scars on the tissue should be located diagonally.
- Next, apply the razor itself, drag it along the fabric and in the opposite direction. This step will take up to 150 movements.
- When finishing sharpening, rinse the blade with water.
The “jeans” treatment process helps to increase the service life of the device by 2-3 times.
If you are wondering how to sharpen a razor and don’t want to buy any equipment, you can build a special pyramid for this purpose.
This device is useful for repeated use. Sharpening your razor is simple and convenient. When manufacturing, you should proceed from the dimensions of the machine. The device itself can be constructed from wooden slats and any available material that is used to cover the sides of the figure. Using machines with this device is very profitable.
The razor is placed in the inner part of the pyramid with the blade directed north. The device itself is also positioned taking into account the cardinal directions.
Why a razor blade becomes sharp is still an open question for debate. Judging by the reviews of those who tried to build a special pyramid, we can conclude that the method really works.
One razor must be processed in a pyramid for 1.5-4 years. Therefore, the device is considered effective and reliable, despite its secret technique of influence.
Sharpening accessories
When demand arises, supply always appears. Recently, on the windows of some stores you can find special devices that make it easy to sharpen a razor at home. The device itself resembles a special pen, which is equipped with a small plastic strip. On the outer part of which a composition (abrasive) is applied, which sharpens disposable and reusable machines. With this device, the service life is extended several times.
Such devices are easy to use and allow you to achieve good effect. To process a razor using such a device, the following steps are taken:
- Apply a small amount of liquid soap, gel or shaving foam to the top of the device.
- The razor is taken and passed along the abrasive in the direction opposite to the movement during the operation of the blade
- To achieve the result, you need to do about 30 movements. And this is enough, the blade of dreams will become sharp.
That's all the methods that solve the question of how to sharpen Shaver. Using these simple devices you can save money and extend the life of your blades by several months.
Most people around the world use various shaving machines to maintain a neat appearance. This applies to both men and women. An easy-to-use device allows you to remove excess hair on the face and body, easily and without unnecessary hassle.
It is also quite possible to sharpen a razor, significantly extending its life
Shaving has been used since ancient times. Most likely, this is due to the inconvenience caused by overgrown facial hair.
There are several types of razors:
- Straight razor. Has an open blade. You need to handle it carefully; an awkward movement can lead to a cut. It takes skill to hold the sharpened surface at the right angle to achieve the result;
- Safety razor. In such a machine, the sharp edge is located at a given angle, making it more difficult to get a cut from touching. The market offers types with replaceable blades, “cassettes” of several blades, and disposable options. They are convenient to take with you on the road, they do not require a network connection and are very easy to use;
- Electric razor. Modern look similar devices. The cutting surface is hidden behind a special mesh, which protects against injury. A special feature of this type is the need for electrical power to operate. Some models are equipped with batteries for autonomy for some time.
One of the main disadvantages of this item is that the blades become dull after a period of time. However, not everyone knows that it is quite possible to sharpen a razor for further use. There are methods and devices that will allow you, to avoid unnecessary costs, or, if necessary, adjust the blade.
Do I need to sharpen my razor myself?
The procedure for renewing the sharpened edge of a blade is not as complicated as it seems at first. Self-sharpening will allow you to avoid unnecessary expenses and restore the sharpness of your razor for a while when it is not possible to purchase a new one.
If you are interested in the question of how to sharpen your razor, then there may be several answer options:
- Special devices
- Tools at hand.
Razor sharpening devices
Due to the great demand for machines and the question of how to sharpen an old blade, some manufacturers have launched special sharpening devices that allow you to carry out such a procedure as sharpening razor blades at home. This device is a plastic base with abrasive applied on top. Using this item, if necessary, can give your machine a second, or even a third life. The whole procedure will take 5-10 minutes.
How to sharpen a disposable razor
Many people really think that it is not possible to sharpen a safety razor blade again, but this is not so. To do this you need to purchase a sharpening device. Instructions for sharpening at home are below.
To sharpen the machine, a strip of special plastic mixed with the smallest abrasive is used, laid on a convenient base in the form of a block. Such devices include RazorPit (manufacturer – Denmark) and Zattoch (Ukraine)
There are several razor blade sharpeners, but the principle of use is the same for all. The action takes place in three stages:
- Apply a little shaving gel to the abrasive surface. This is done in order not to create unnecessary damage on the cutting edge;
- Run the razor over the surface in the opposite direction to the direction of use. You need to make about 30 movements;
- Rinse the machine and sharpening device with water. It is necessary to remove the smallest particles of metal and abrasive so as not to spoil the characteristics and avoid unnecessary skin irritation.
After carrying out these simple manipulations, you will get your razor in working condition.
Sharpening a disposable machine on your jeans
Improvised means are also very popular for sharpening razors. If we are wondering how to sharpen our razor at home or how to sharpen razor blades in a cassette, then the answer is - we sharpen it with jeans.
To do this, you will need denim (or other tough material), a hard surface and a few minutes of time.
It turns out that you can easily extend the “life” of a cassette. All you need is jeans and a little patience.
Procedure:
- The fabric must be turned wrong side out. This side is more suitable for the upcoming procedure due to its rigidity and helps not to spoil appearance clothes, if jeans or a jacket are used;
- We stretch the improvised abrasive onto a hard surface. The base can be a ruler, book, pen or something similar. Position the material so that the threads run along the entire surface;
- To sharpen a disposable razor, take it and move it against the direction of shaving across the threads. The necessary friction will remove microscopic nicks from the surface of the blade and remove a thin layer of metal. You will have to repeat the movement about 100-150 times.
After this, the razor can be used again. The convenience of this particular option is that in almost any trip, car, etc. You can find a cloth that will serve as an abrasive and help restore the instrument to create the perfect look.
Other methods, alternative sharpening methods
A little about other techniques for sharpening and maintaining the performance of blades, knives, etc. It must be said right away that these options do not have scientific explanation, but judging by the reviews of people who use them, the service life of shaving accessories and cutting objects is significantly increased.
One of the most common such solutions is storing razors in a pyramid. So, in order: 
What do we know about the pyramid? It is a figure made with precise geometric proportions, having a square base and four sides meeting each other at the top. At home, you can build a figure of any size, but it will be correct if you make the base 1.6 times greater than the height, this is called the golden ratio. Energy scientists believe that energy flows continuously circulate inside this figure, affecting objects. An immutable law is the location of each of the walls in the cardinal directions. It is believed that the machine, knife and any object should be laid so that it points to the north.
The base of the pyramid must be made slightly longer than the machine so that it fits freely in it. If you follow all the instructions, it is recommended to make the object without the use of any metal products (nails, staples, etc.). the best material there will be wood, paper and other carbon-containing materials.
There are two common options:
- the pyramid is made with a hole in the southern edge
- or so that it can be removed from the base and put back.
After this, all you have to do is periodically leave the razor there for 24 hours to maintain or restore the sharpness of the blades.
If you have an electric razor, then if you have a question about how to sharpen a razor, it is better to turn to a professional, because this requires disassembling the device, the design of the knives, etc.
In conclusion of all the information described, we can conclude that it is possible to sharpen a razor, and more than once. This will not only help save personal money on the purchase of replacement cassettes and blades, but will also help out in a situation where we cannot purchase a new device or do not have time to go to the store, but we need to look appropriate for the occasion. This knowledge will be useful to both men and women who need to get themselves into proper shape.
For every man, a razor is an indispensable attribute of a comfortable existence in society. It is selected exclusively for his chin, provides him with a neat appearance, and, as a result, self-confidence and good mood which allows you to overcome life's obstacles. It is amazing that such a seemingly insignificant subject actually has a colossal impact. At a minimum, the shaving process can be simply enjoyable if the razor is good. But even the best of them can become dull. How to be in this case?
The razor blade begins to fail
We're talking about a cassette machine. Gillette(vest) with replaceable cutting cassettes. Of course, after this type of razor came into common use, the relevance of sharpening generally disappeared. This seemingly archaic process is associated for many only with a straight razor. It really always had to be kept sharp, and looked after with more care than a knife in a fine dining restaurant.
But as for how to sharpen a disposable razor or with replaceable attachments, the question does not even arise. But in vain, because the razor blade, regardless of its configuration, can be sharpened. This is logical, since the blade itself can be sharpened. So why not use the same laws, but with a razor?
In fact, all this does not require particularly delicate tools and equipment in a garage workshop; the simplest available tools at home, which, without a doubt, all men have, are quite suitable. To do this, you really only need two things:
- The machine itself
- Old jeans
Of course, a flat surface on which everything will take place will also be useful. It is necessary to turn the jeans inside out and polish the machine on the wrong side using exactly the same actions as when shaving. But you just need to add movement in the opposite direction.
Eat little advice regarding the surface used. Some razors have protrusions at the corners of the cassette that will not allow the blades to fit as tightly as possible to the denim. For this case, you can use a ruler, for example, which will be narrower than the cassette of a razor vest (which, in fact, has similar protrusions). Thus, you will get something similar to a homemade sharpening apparatus for a razor.
You need to make approximately 40-50 movements in each direction. This will give the blades their former sharpness and shaving will again be as comfortable as usual. Despite the fact that this method significantly extends the life of the cassette, it is important to remember that each time it is used it will become duller faster. The blade itself is thin and after the above operation becomes even thinner. Moreover, it is shrinking. Therefore, after some time it will simply be ineffective.
How to sharpen a straight razor?
In fact, this is a fairly broad topic, although it seems that there is nothing complicated about it. The razor, having a very simple design, has very delicate and sensitive operating principles. In general, sharpening itself is one of the maintenance processes for this razor. How to sharpen a razor, and what is needed for this?
The process will consist of the following steps:
- Inspection and checking of cutting surface (geometry)
- Correction
- Sharpening and finishing
- Then check the sharpness
Each stage has its own details. But in general, checking the geometry is done as follows: you need to take a flat surface, glass will do, for example, and place the razor on it so that the blade and leads lie flat on it. This will indicate which sharpening stone you need to select: rough or soft.
Finishing is done, for example, with thick fabric, like a leather belt. You need to move on to this stage after sharpening in order to work exclusively with the surface of the razor blade. straight razor many men love it, but when purchasing it, in addition to good shaving quality and style, there is also a great need for caring for this instrument.
