home
Planning a pregnancy
How to make sandals from cardboard. How to make a shoe out of paper. DIY paper sandals. Step-by-step master class with photos. How to assemble a delicate paper shoe with your own hands in a master class. DIY paper shoe

How to make sandals from cardboard. How to make a shoe out of paper. DIY paper sandals. Step-by-step master class with photos. How to assemble a delicate paper shoe with your own hands in a master class. DIY paper shoe

30.10.2020

Master class with step by step photos for making paper sandals

Author: Berdnik Galina Stanislavovna, teacher primary classes Laryak correctional (special) general education national boarding school for students with disabilities disabilities health.
Description: in this master class provided detailed description making crafts "Summer sandals".
The material can be used by primary school teachers, educators preschool education, teachers of additional education.
Purpose: The work can be used as a gift or interior decoration.
Target: Make a craft using cardboard and paper.
Tasks:
1. Develop fine motor skills fingers, sense of volume and shape, logical thinking, Creative skills.
2. Cultivate hard work and perseverance, the desire to complete the work started.
3.Develop and cultivate neatness and aesthetic taste.
Materials for work.
1. Paper, corrugated cardboard.
2. Pencil, scissors, ruler.
3. Glue.
4. Beads, buttons, pieces of satin ribbon to decorate the finished product

Templates

Detailed description.
1. To make “summer shoes” we will use the following template.
Any children's shoes can serve as a template.

2. Prepare two parts at once. One from colored cardboard, the other from corrugated cardboard. Corrugated cardboard will add elegance to the finished product.

3. On thick, preferably double-sided paper, draw strips 15 - 20 mm wide.

Carefully, without moving the blades of the scissors together, cut out.
Four strips will be enough, but you can prepare more.

4. Without bending or deforming, place the strips on the front part of the sole.

We fix the ends of the strips on the wrong side of the base of the product.

Multiple strips can be used. It all depends on the thickness of each of them.

5. To add strength, place and fix one strip across the sole. If you use thick paper, you can intertwine the strips together in a checkerboard pattern.

6. The wrong side of the product must be neat. This is where pre-prepared shoe soles made from corrugated cardboard come in handy.
Glue the corrugated cardboard, covering the beginning and end of the strips.

7. And lastly, the most enjoyable thing to make, requiring imagination and creativity, is decorating the shoe.

You can decorate with whatever you have at hand. These can be large beads, satin ribbons, stars and bows.

It turned out very elegant and beautiful, it’s a pity that it’s not possible to wear such shoes. But on the other hand, sandals give us joy and anticipation of the soon approaching hot sunny summer.
Thank you for your attention!

We hear the word handmade more and more often in Everyday life. But it’s true that something made with your own hands brings more joy and warmth. Heeled shoes inspire femininity, beauty and attract the attention of men. Any woman does not remain indifferent when she sees beautiful shoes on stiletto heels. You can give a shoe, and not an ordinary one, but an almost magical one. A do-it-yourself paper shoe can be used for beautiful and unusual gift, for example, ordinary sweets, perfume or money, which will make the gift original and will definitely not go unnoticed. Depending on the decor, such a masterpiece can be presented for any celebration, be it a wedding, birthday, New Year or March 8. Below is an example of how to do this and what materials you will need.

DIY shoes

DIY paper shoes can be used:

as decor to decorate a gift;
as packaging;
just as an item for decorating a room.

Necessary materials:

Thick colored paper and cardboard.
Sample.
A simple pencil.
Scissors.
Knitting needle or wooden stick.
Paper glue.
Decor for decoration.

Step-by-step execution of actions:

Download the template online and enlarge it to the size you need.
Attach the template to colored paper and trace using a simple pencil - this will be the inside.
Trace the outer part on cardboard.
Cut out all the elements of the future product.
On the cardboard at the folds, make dotted lines according to the template.
Acute wooden stick or draw a knitting needle along the dotted lines, bend the parts along them so that the diagram folds neatly.
Apply glue along all the necessary lines and glue.

Important! It is best to glue starting from the back of the heel.

Let the product dry thoroughly.
We repeat the same procedure with the inner part - we use a sharp object along the folds.
Apply glue to the inside and carefully glue it to the outside, starting from the toe.
Fold the shoe so the inside looks neat.

All that remains is to decorate your product. To do this, you can use any decorative items, for example, beads, sequins, small flowers, lace, ribbons at your discretion.

Shoe with candy

Let's consider another very interesting view a gift that will be the same size as size 36 shoes. You will need:

Shoes size 36 (or size of your choice).
Corrugated cardboard.
Glue gun.
Double sided tape.
Wire.
Penoplex.
Pencil.
Scissors and stationery knife.
Sandpaper.
Thin cardboard and corrugated colored paper.
Decor.
Candies.

Sequencing:

First, make a sketch - to do this, outline the sole and draw a heel, or find ready template in the Internet.
Attach the sole template to corrugated paper, trace and cut out two identical blanks - this is the sole for your product.
Glue double-sided tape onto one of the blanks and place three pieces of wire on top.
Cover the entire surface with glue and attach the second piece.
Give the creation the shape of a pair of heels.
Attach the sole template to the penoplex foam, cut out a platform for the toe of the craft, triangular in shape.
Cut out a heel from foam using a sketch.
Sand the workpieces using sandpaper.

Important! To make the heel stable, insert a wire into it.

Glue the rectangular cardboard to the sole blank, trim off the excess along the edge.
Next, glue the platform to it with hot glue, and again glue the cardboard in shape.
Paste over corrugated paper make the heel, sole and inside of the future shoe with your own hands. Choose the color at your discretion.
Glue the heel.
Wrap the candies with pre-prepared petals to make a flower.
Decorate the finished masterpiece as you wish.

DIY paper shoes are ready!

A high-heeled shoe is a favorite ladies' accessory, which is the personification of femininity, beauty and attracting the attention of the opposite sex. Real woman never remains indifferent when looking at a graceful, elegantly shaped stiletto heel. Many ladies enjoy collecting shoes and have them for every outfit, for every event and event.

But that's not what we're talking about now. On March 8th, the holiday of all women, and therefore the holiday of beautiful shoes. The shoe can be given as a gift, not just a simple one, but an almost magical one. This is exactly what a voluminous shoe will look like - a postcard that you can make with your own hands, which will fit absolutely everyone and will suit any outfit on International Women’s Day, and not only. In addition, such a shoe can serve as a container for another gift: chocolate, perfume or cosmetic set, jewelry or a bouquet of flowers.

In order to do voluminous shoe We will prepare the following materials from paper: thick colored paper or paper with a pattern (for example, thin colored cardboard, scrapbooking paper, leftovers from bright wallpaper), glue, pattern paper, decorative elements(buttons, bows, beads, paper or fabric flowers, etc.).

Take a paper shoe pattern, use one of the templates, or create a template according to your sketches. It is convenient to make the pattern on tracing paper or a white sheet of paper.

We transfer the pattern to colored paper. Carefully cut out and glue along the folds intended for this. Use a glue stick or PVA glue to avoid warping the paper with excess moisture, which is present in regular stationery glue. You should get a three-dimensional display of the desired ladies' item of clothing - a high-heeled shoe.

Now comes the fun part: decorating the shoe with accessories. See if you have any beautiful buttons, rhinestones or beads. The shoe can be complemented with a silk bow, a flower made of fabric or paper, a fragment of a chain and some other elegant things.

The shoe can be an independent object that can be filled with gift filling if the surprise is small. If the gift is larger than a shoe, then it is easy to attach it on top packing box put a note or a small card with your wishes in it.

This paper shoe also holds a small bouquet of violets, lilies of the valley or mimosa, which will look super original.

A very successful gift for March 8th, it will surprise and delight the recipient of the magic shoe. However, not only International Women's Day can serve as an occasion for such a gift.

The source of some photos is the website "Fair of Masters", where you can also see other options for making pretty paper shoes.

Nowadays, souvenirs made from paper using the origami technique are very common and popular. They look very unusual, original and will definitely delight lovers of interesting cute things. A paper shoe that we will make with our own hands is an excellent option for a gift on a birthday, women's day or any other holiday. You can give it as an independent souvenir, or you can make a shoe - a stand for sweets, which will also look very beautiful and will delight lovers of sweets. In this master class we will teach you how to make paper souvenirs with your own hands.

How to assemble a delicate paper shoe with your own hands in a master class

In order to start making such a shoe out of paper, you need to prepare templates for the outside and inside of the shoe.

Inner side.

We will take two types of paper for making shoes: decorative polka dots for the outside and regular office tinted paper for the inside.

Based on these patterns, we make paper blanks. Carefully cut out. In order for the shoes to fold easily, you need to walk along the fold lines on the cardboard with some sharp object, such as a knitting needle. After such actions everything will be easy and simple. Next you need to glue the paper shoe. This should be done from the back of the heel. At the stage of work indicated in the photo, you should stop and leave the shoe unfinished.

Now let's work on the inside of the shoe. We also draw along the fold lines on the paper with a knitting needle. Once the inside is folded, you can start gluing it. It’s better to start doing this from the sock and gently smooth the paper over the shoe. Next, we immediately fold the upper part of the shoe, while making sure that the inside does not wrinkle and is positioned as needed. Glue the top of the shoe. In this form, the paper product can begin to be decorated.

Let's look at one more interesting option shoes, which are presented with sweets.

To make it you will need the following materials:

Styrofoam;
Candy flowers;
Corrugated paper;
Artificial flowers;
Decor elements.

This decorative shoe will be made to the size of a real one. It is necessary to draw and print, and then cut out the sketches.

We attach them to thick cardboard and cut out two identical parts. This will be the sole of the future shoe. We glue double-sided tape to one of the blanks. Then we glue three pieces of wire onto it. Apply hot glue over the entire surface and glue the second cardboard blank onto it. All these actions must be performed very quickly. When the glue has set, the resulting workpiece must be shaped as in the photo.

The next step is to prepare a triangular platform for the shoe from polystyrene foam. We apply the sole to the foam, trace it with a simple pencil and cut out a triangle. The height of the foam platform should be approximately 1.3 cm. Using the previously prepared sketch, we cut out the heel for the shoe from foam plastic. The workpieces must be sanded with sandpaper. In order for the heel to be stable, it is necessary to insert a wire into it.

Next, take a cardboard blank for the sole and glue thin cardboard onto it. We cut off the excess. Place a triangular platform on top of the hot glue. We paste it all over again thin cardboard. Again, cut off the excess around the edges.

For beauty, we will cover the heel and platform with corrugated paper. In our example, it is silver. Of course, you can choose any other color you wish. The lower part of the platform is covered with light green corrugated paper, and the upper part is covered with pink paper.

Now we put the heel on the hot glue. We suggest decorating the seams of the product with silver braid. The decor of the shoes can be anything, depending on preferences. In our example, wire, white tape and artificial flowers are used. We place candy flowers on top and the decorative shoe is ready.

Perhaps someone did not know about this creation option original gift, someone was interested in this article due to the detailed description and additional explanatory materials. It doesn’t matter for what reason you read it to the end and got acquainted with all the selected drawings, the main thing is that it is useful, and this will manifest itself in the creation of the same, or perhaps better, decorative element. Some would prefer to store jewelry and jewelry in such a shoe, others would prefer to store hair accessories or other small items. If you like this idea, be sure to try to repeat the creation of a wonderful shoe.

At the end of the article, we suggest that you familiarize yourself with several interesting videos, on creating paper shoes.

Video on the topic of the article

We bring to your attention the option of making a souvenir shoe with your own hands using simple materials.

To make a souvenir shoe you will need:

Corrugated cardboard;

Penoplex;

Corrugated paper;

Denim;

Decorative braid;

Two-way cattle;

Scissors, pencil, hot glue;

Decor as desired: candies, flowers, beads, ribbons, etc.

Souvenir shoe step by step:

We cut out 2 blanks from corrugated cardboard - soles for shoes (photo 1).

We cut out a “triangle” from penoplex. To do this, put the sole on the foam plastic and trace the shape of the toe part with a pencil. Cutting off the excess, we gradually shape the platform for the shoe. We can make the platform any height (photo 2).

We glue double-sided tape onto one sole. We glue several pieces of wire onto the tape. We secure it on top with simple wide tape (photo 3.1). Lubricate the surface of the workpiece with hot glue (photo 3.2).

Glue two layers of cardboard together. This must be done quickly before the glue hardens. And as we glue, we give our sole the desired bend (photo 4).

On the upper part of the sole we glue a layer of cardboard with hot glue, but thin... (this is done so that the surface of the sole is even and smooth) (photo 5). The excess needs to be trimmed (photo 6.1). Glue the platform onto hot glue (photo 6.2).

We glue a layer of ordinary cardboard to the back (bottom) side of the sole (similar to photo 5). We cut off the excess (photo 7).

Cut out a heel from foam plastic. Let's sand it down. For reliability, insert a skewer into the lower part of the pin (photo 8).

Cover the heel with corrugated paper (photo 9). On the top part we glue corrugated paper or fabric (in in this case denim). We also cover the platform with corrugation.

We cover the bottom part of the shoe with corrugated paper (photo 11). We decorate the sides and “seams” with braid (photo 12).

Hot glue the heel (photo 13). Glue the insole and the shoe is almost ready! All that remains is to decorate it with candies, flowers, ribbons and beads.

Let's start making decor (to your taste).

We have not been surprised by all sorts of paper miracles for a long time. The huge number of offers of paper for creativity also helps to diversify your paper crafts. Especially scrapbooking papers. Once you enter such a store, you definitely won’t leave empty-handed. After all beautiful patterns they beckon you to create something unusual. And for paper masterpieces you don’t need to study for a long time. Grab your scissors and glue and satisfy your creative ambitions! And we will help you with inspiration. Scrapbooking paper shoes is the topic of today’s article.

So, make a template and transfer the patterns onto A4 paper, as shown in the photo.

You should have the following details:

bottom sole
upper sole with heel
upper part of the shoe
the intermediate part of the heel with teeth for gluing (for contrast, it can be cut out of paper of a different color)

The upper part of the shoe also has teeth; glue it to the upper insole.

Turn over and glue the bottom insole.

Then glue the side parts to the intermediate part of the heel, thereby giving the heel the desired shape.

All that remains is to decorate the shoe, you can decorate it with anything - show your imagination.

Marina Orlova

Required material and tools: scissors, PVA glue or glue stick, colored paper, color cardboard, simple pencil, ruler.

First of all, let's outline the leg (foot) per sheet paper. We trace with a simple pencil and cut out the part - this will be the bottom of the shoe.

Let's mark it on color paper and cut out parts and blanks.

We bend the bottom part in two places.

We cut off a 12 cm piece from the upper part of the shoe. Mark and cut out 1 cm valves on both sides of the piece.

Glue the prepared part to the bottom part (from the wrong side).

Let's take a blank for the strap, cut off two parts 10 cm long from it. Mark and cut out a 1 cm wide valve on one side of each part. Fold and glue the parts.

We glue the prepared parts to the wrong side of the bottom - these are straps.

Glue the heel blank into a ring. We bend the valves inside the resulting ring and glue the heel to the bottom part.

Now we take the sole blank and glue the bottom parts to it.

Let's take two blanks of a clasp strap, cut off a part 12 cm long from one of them, and a part 28 cm long from the other. We make loops on the parts of the straps.

Glue the short strap to the top piece. We pass the long strap through the loops and into the short strap, fasten the clasp.

That's what it is beautiful shoes The whole class got it.

Such shoes can be done with children in the preparatory group.

We hear the word handmade more and more often in everyday life. But it’s true that something made with your own hands brings more joy and warmth. Heeled shoes inspire femininity, beauty and attract the attention of men. Any woman does not remain indifferent when she sees beautiful stilettos. You can give a shoe, and not an ordinary one, but an almost magical one. A handmade paper shoe can be used for a beautiful and unusual gift, for example, ordinary sweets, perfume or money, which will make the gift original and will definitely not go unnoticed. Depending on the decor, such a masterpiece can be presented for any celebration, be it a wedding, birthday, New Year or March 8th. Below is an example of how to do this and what materials you will need.

DIY shoes

DIY paper shoes can be used:

as decor to decorate a gift;
as packaging;
just as an item for decorating a room.

Necessary materials:

Thick colored paper and cardboard.
Sample.
A simple pencil.
Scissors.
Knitting needle or wooden stick.
Paper glue.
Decor for decoration.

Step-by-step execution of actions:

Download the template online and enlarge it to the size you need.
Attach the template to colored paper and trace using a simple pencil - this will be the inside.
Trace the outer part on cardboard.
Cut out all the elements of the future product.
On the cardboard at the folds, make dotted lines according to the template.
Draw a sharp wooden stick or knitting needle along the dotted lines, bend the parts along them so that the diagram folds neatly.
Apply glue along all the necessary lines and glue.

Important! It is best to glue starting from the back of the heel.

Let the product dry thoroughly.
We repeat the same procedure with the inner part - we use a sharp object along the folds.
Apply glue to the inside and carefully glue it to the outside, starting from the toe.
Fold the shoe so the inside looks neat.

All that remains is to decorate your product. To do this, you can use any decorative items, for example, beads, sequins, small flowers, lace, ribbons at your discretion.

Shoe with candy

Let's consider another very interesting type of gift, which will be the size of a size 36 shoe. You will need:

Shoes size 36 (or size of your choice).
Corrugated cardboard.
Glue gun.
Double sided tape.
Wire.
Penoplex.
Pencil.
Scissors and stationery knife.
Sandpaper.
Thin cardboard and corrugated colored paper.
Decor.
Candies.

Sequencing:

First, make a sketch - to do this, outline the sole and draw a heel, or find a ready-made template on the Internet.
Attach the sole template to corrugated paper, trace and cut out two identical blanks - this is the sole for your product.
Glue double-sided tape onto one of the blanks and place three pieces of wire on top.
Cover the entire surface with glue and attach the second piece.
Give the creation the shape of a pair of heels.
Attach the sole template to the penoplex foam, cut out a platform for the toe of the craft, triangular in shape.
Cut out a heel from foam using a sketch.
Sand the workpieces using sandpaper.

Important! To make the heel stable, insert a wire into it.

Glue the rectangular cardboard to the sole blank, trim off the excess along the edge.
Next, glue the platform to it with hot glue, and again glue the cardboard in shape.
Cover the heel, sole and inside of the future shoe with corrugated paper with your own hands. Choose the color at your discretion.
Glue the heel.
Wrap the candies with pre-prepared petals to make a flower.
Decorate the finished masterpiece as you wish.

DIY paper shoes are ready!

How to assemble a delicate paper shoe with your own hands in a master class

In order to start making such a shoe out of paper, you need to prepare templates for the outside and inside of the shoe.

Inner side.

We will take two types of paper for making shoes: decorative polka dots for the outside and regular office tinted paper for the inside.

Let's consider another interesting version of a shoe, which is presented with sweets.

To make it you will need the following materials:

Styrofoam;
Candy flowers;
Corrugated paper;
Artificial flowers;
Decor elements.

This decorative shoe will be made to the size of a real one. It is necessary to draw and print, and then cut out the sketches.

Next, take a cardboard blank for the sole and glue thin cardboard onto it. We cut off the excess. Place a triangular platform on top of the hot glue. We cover it all again with thin cardboard on top. Again, cut off the excess around the edges.

Perhaps someone did not know about this option for creating an original gift; someone was interested in this article due to the detailed description and additional explanatory materials. It doesn’t matter for what reason you read it to the end and got acquainted with all the selected drawings, the main thing is that it is useful, and this will manifest itself in the creation of the same, or perhaps better, decorative element. Some would prefer to store jewelry and jewelry in such a shoe, others would prefer to store hair accessories or other small items. If you like this idea, be sure to try to repeat the creation of a wonderful shoe.

At the end of the article, we suggest that you familiarize yourself with several interesting videos on creating paper shoes.

Video on the topic of the article

Why do you need a paper shoe? - you ask a question, and I will try to answer it in this master class and clearly show you how to make such a shoe with your own hands. Materials for such crafts are available in every home, and even those who do not do any needlework at all, and the process of creating decorative “shoes” is very simple.

So, what can these shoes be used for? Well, first of all just for small gift for any reason, even a very ordinary one. After all, you must admit, it’s nice to receive such a present from a friend or daughter, just like that, on a day off. This craft can also be used to decorate a large gift by attaching it, for example, to a packaging box. Yes, in principle, you can come up with many situations for using such a wonderful and beautiful decor(decoration for a wedding car, for example). Well, let's start doing it, shall we?

Paper shoe

Although our craft is called “Paper Shoe,” to create it you will need some more materials:

corrugated paper (can be replaced with regular colored paper);
cardboard;
decorative paper or satin ribbon;
a small piece of thick foam;
decorative flowers;
cocktail tube or straight stick;
glue gun, pencil, scissors.

As you can see, anyone can find such materials without leaving home. Therefore, our master class is available to craftswomen of absolutely any skill level. Before you start cutting out templates and gluing flowers, I recommend thinking about the image of the craft itself, i.e. what it will look like when finished. Then you can easily go from stage to stage, completing all the steps quickly and without errors.

DIY paper shoe

Do you have a stiletto heel? Real, from your own shoe wardrobe? Look at it - see how the heel and sole are made? So in our master class we will repeat these same shapes, only with the help of cardboard and foam plastic. A decorative design make it out of paper decorative flowers and ribbons. As you can see, a DIY shoe is not a complicated, but at the same time beautiful and attractive decoration for any festive situation.

If you want to make a shoe out of paper, then I can offer you several templates that you can use to fold and glue this craft yourself. You can do this from colored paper, in different sizes, and with different decor. In such a paper shoe you can put some small surprise in the form of a bag of candy or a box with a ring. 😉 You can download templates and it's easy to make a simple paper shoe that can be used instead gift box for small surprises.

DIY shoe

To make your own shoe beautiful and neat, try to stick to the size and proportions. But even if you missed something a little somewhere or did not use the scissors correctly, do not rush to throw away the workpiece. Try to play up this nuance, not hiding it, but rather emphasizing it. For example, an ugly cut can be made as if someone had bitten off a piece of a shoe, with teeth marks, uneven edges, etc. Unusual? Yes. But it is very original.

How to make a shoe with your own hands

Let's start our master class, in which you will learn how to make a shoe with your own hands from scrap materials.

At the first stage, we cut out the sole from cardboard, trying to maintain the proportions as much as possible. Take corrugated cardboard and cut the sole across the lines. This will make it easier for the sole to bend and take the correct shape.

Then we cut out the toe of the shoe and the heel from foam plastic. To apply the cutting lines, use the already cut cardboard sole, placing it on top of the foam and tracing the contour. Make the hen part in the form of a cone, into which carefully (so as not to destroy the structure of the foam) insert a cocktail tube. To make this operation easier, you can use a heated knitting needle to first make a hole in the foam cone, where you can then insert the heel tube.

Now glue the foam blanks to the cardboard sole, after giving it the desired shape.

It's time for the paper we will use to decorate our shoe. Pick up desired color crepe paper and glue the sole on top and sides. Also wrap the heel of the shoe with strips of the same paper, securing it with glue. Be careful not to leave any uneven edges or protruding ends.

We decorate the sides with a narrow paper ribbon, grabbing it by the edge. Instead of a paper ribbon, you can use a satin or any other ribbon, which in its design will suit the external decor of the shoe.

It's time for the last stage of our master class on creating a paper shoe with your own hands. Decorate the nose of the craft with a large decorative flower so that it covers the entire front part of our “shoe”, and the leaves overhang slightly. This will add naturalness to the entire composition. If you don't have it ready decorative flower, then you can use our lessons in which we did , , and create a similar decoration yourself.

The heel of the shoe can also be decorated with small flowers, gluing them one above the other. Additionally, the edge of the shoe can be decorated with a butterfly, rhinestones, a chain and other similar decor.

So our handmade shoe made of paper, cardboard, with a flower and various decor is ready. like this beautiful craft Can be used both as an independent gift and as a decoration for decorating the main present.

We bring to your attention the option of making a souvenir shoe with your own hands using simple materials.

To make a souvenir shoe you will need:

Corrugated cardboard;

Penoplex;

Corrugated paper;

Denim;

Decorative braid;

Two-way cattle;

Scissors, pencil, hot glue;

Decor as desired: candies, flowers, beads, ribbons, etc.

Souvenir shoe step by step:

We cut out 2 blanks from corrugated cardboard - soles for shoes (photo 1).

Glue two layers of cardboard together. This must be done quickly before the glue hardens. And as we glue, we give our sole the desired bend (photo 4).

We glue a layer of ordinary cardboard to the back (bottom) side of the sole (similar to photo 5). We cut off the excess (photo 7).

Cut out a heel from foam plastic. Let's sand it down. For reliability, insert a skewer into the lower part of the pin (photo 8).

Cover the heel with corrugated paper (photo 9). We glue corrugated paper or fabric (in this case denim) onto the top part. We also cover the platform with corrugation.

We cover the bottom part of the shoe with corrugated paper (photo 11). We decorate the sides and “seams” with braid (photo 12).

Hot glue the heel (photo 13). Glue the insole and the shoe is almost ready! All that remains is to decorate it with candies, flowers, ribbons and beads.

Let's start making decor (to your taste).

A high-heeled shoe is a favorite ladies' accessory, which is the personification of femininity, beauty and attracting the attention of the opposite sex. A real woman never remains indifferent when looking at a graceful, elegantly shaped stiletto heel. Many ladies enjoy collecting shoes and have them for every outfit, for every event and event.

But that's not what we're talking about now. On March 8th, the holiday of all women, and therefore the holiday of beautiful shoes. The shoe can be given as a gift, not just a simple one, but an almost magical one. This is exactly what a voluminous shoe will look like - a postcard that you can make with your own hands, which will fit absolutely everyone and will suit any outfit on International Women’s Day, and not only. In addition, such a shoe can serve as a container for another gift: chocolate, a perfume or cosmetic set, jewelry or a bouquet of flowers.

In order to make a voluminous paper shoe, we will prepare the following materials: thick colored paper or paper with a pattern (for example, thin colored cardboard, scrapbooking paper, leftovers from bright wallpaper), glue, pattern paper, decorative elements (buttons, bows, beads, paper or fabric flowers, etc.).

Take a paper shoe pattern, use one of the templates, or create a template according to your sketches. It is convenient to make the pattern on tracing paper or a white sheet of paper.

Transfer the pattern onto colored paper. Carefully cut out and glue along the folds intended for this. Use a glue stick or PVA glue to avoid warping the paper with excess moisture, which is present in regular stationery glue. You should get a three-dimensional display of the desired ladies' item of clothing - a high-heeled shoe.

Now comes the fun part: decorating the shoe with accessories. See if you have any nice buttons, rhinestones or beads. The shoe can be complemented with a silk bow, a flower made of fabric or paper, a fragment of a chain and some other elegant things.

The shoe can be an independent object that can be filled with gift filling if the surprise is small. If the gift is larger than a shoe, then it is easy to attach it to the top of the packaging box and insert a note or a small card with wishes into it.

This paper shoe also holds a small bouquet of violets, lilies of the valley or mimosa, which will look super original.

A very successful gift for March 8th, it will surprise and delight the recipient of the magic shoe. However, not only International Women's Day can serve as an occasion for such a gift.

;

Appearance little man in a family it is a wonderful and joyful event. Every newborn child, so tender and fragile, brings innocence, beauty and charm out of this world into our world... And this fills the hearts of parents even more with happiness and love.

This cute souvenir, designed in the form of a pair of bright children's sandals, is dedicated to all newborn children and their parents.

To create one pair of such paper shoes you need:

- a sheet of thick paper yellow color(130-160 g/m2),

- leaf office paper Red,

- figured hole punches,

- breadboard knife,

- Double-sided tape,

- scissors, glue,

- creasing tool,

- rhinestones.

1. These are templates for making our shoes. The upper part of the sandal can be decorated with a carved flower.

2. Print out stencils of the two parts in a mirror image to each other on a sheet of yellow paper.

3. And cut them out. For this, use the tool that is more convenient for you (scissors or a breadboard knife). The bases of the peculiar “teeth” should be punched (pressed) for better bending.