Every owner of products made from this material needs to know how to iron a leather jacket. After long winter storage leather clothes may become covered with unsightly folds, in place of which cracks will form over time. As a result, your jacket will lose appearance and will only be suitable for discarding, so try to smooth out wrinkles in a timely manner to extend its service life.
After long-term winter storage, leather clothing may become covered with unsightly folds, in place of which cracks will form over time.
To understand how to iron a leather jacket at home, you need to remember the basic rules. There are several ways to perform this procedure:
- using steam;
- iron;
- special equipment in dry cleaning.
The jacket should only be placed on a hanger suitable size
How to iron a wrinkled leather jacket without an iron and without any equipment at all? There is nothing complicated about this: you should hang the jacket on a hanger and leave it for a few days, it will straighten out under its own weight without any of your participation.
The time of such “rest” directly depends on how well the material is made. The jacket is made of thin leather or suede - it will last 2-3 days. In the same case, when it is made of thick leather, you will have to wait at least a week.
Remember that the jacket should only be placed on a hanger of the appropriate size. If you hang such a thing on hangers that are too wide, it may stretch out too much. If, on the contrary, they are too small, the skin will not have the opportunity to straighten out, and the jacket will remain wrinkled.
You can master the procedure of “pulling” it over hot water in the bathroom
How to iron a leather jacket quickly? You can master the procedure of “pulling” it over hot water in the bathroom. During the entire procedure, drops of moisture that appear from evaporation must be removed from the surface of the skin.
In order for all the creases on your jacket to disappear without a trace, you will need to wait no more than half an hour. In difficult cases, this period is extended to 1 hour.
Fast way How to iron a leather jacket at home will use nut oil. This product is not cheap, but if necessary, it can be replaced with simple Vaseline. The effect will be the same.
First, using cotton wool, apply a thin layer of Vaseline or oil to the wrinkled areas of the skin. After this, leave the jacket to “hang” on the hangers. As a result, it should smooth out about 2 times faster than usual.
A quick way to iron a leather jacket at home is to use nut oil
Using an iron to smooth the skin
If simple ways smoothing the skin did not produce results, you will have to decide how to iron a leather jacket with an iron. Of course, many people do not understand how it can be used to iron leather items, but irons are actively used to give leather items a good appearance. In any case, you need to be careful and follow some rules so as not to damage your leather jacket.
It can only be ironed with the temperature regulator in the first or second position. If the temperature is higher, you can throw away your jacket, as it will be hopelessly damaged. The same applies to any other products made of leather.
The jacket is ironed only with the temperature regulator in the first or second position
Important! Most literature containing information on how to properly iron a leather jacket indicates that this should be done exclusively from the front side of the product, laying it out on an ironing board.
In this case, the leather is covered on top with ordinary wrapping paper or cotton cloth; they protect the surface of the leather from contact with the surface of the iron.
The fabric itself should not be as smooth as possible without a pronounced structure. Gauze or waffle towels are not suitable for this - their structure may be imprinted on the skin during ironing.
Each wrinkled area of the product is smoothed out individually
In this case, the ironing itself is carried out with the steamer turned off; it is advisable to drain the water from the tank. Next, the iron is heated to the required temperature and carefully begin to smooth the surface of the product, lightly pressing on the iron. Be sure to control this process so as not to accidentally burn the skin.
Each wrinkled area of the product is smoothed out separately. Having smoothed one such area, let the jacket cool and only then proceed to smooth out the next unevenness. As a result, you will be able to iron your jacket, maintaining its shape, without allowing it to become deformed.
As for ironing various decorative elements located on the jacket, for this you will need to use a specialized sleeve stand. Typically, such devices are available on every modern ironing board. With their help you will get to the most uncomfortable parts of your jacket.
After this, the item must be hung on hangers and left for about 1 hour.
Steaming the jacket
How can you iron a leather jacket in another way? For these purposes, steam can be used. To do this you need to purchase a steam generator or good iron, which has a steaming function.
If your jacket is soaked water-repellent impregnation, it can collapse under the influence of hot water vapor
It is worth remembering that this smoothing method may not be suitable for every leather item. If your jacket has a water-repellent finish, it may break down when exposed to hot water vapor, causing the leather itself to lose its shine and elasticity. This may not happen immediately, but after 3-4 steamings, so even before starting the procedure, you will need to find out whether your product can be steamed.
It is necessary to start the procedure from the “problem” areas
As for the actual steaming procedure itself, it consists of the following:
- The jacket is hung on hangers, and its sleeves are straightened.
- The steam iron or steam generator must be heated to the highest possible temperature.
- It is necessary to start the procedure from the “problem” areas. In the same case, when the folds of the leather on the product are difficult to smooth out, slightly stretch the skin on the product with your hands and apply steam again.
Important! It is worth noting that the skin is never smoothed out immediately, and you will need to wait for the results to appear only after the item has cooled.
The steam generator or iron with steamer should not be brought too close to the product. The fact is that the hot condensation formed as a result can destroy the skin. The thinner the material, the further the source of steam should be from the item.
The steam generator or iron with steamer must not be brought too close to the product
After the procedure is completed, take the leather jacket and hang it on a hanger. It is important that they are matched to the size of your jacket, and that there is enough space around it. The product itself, after exposure to steam, should hang in a free state for at least half an hour. Only after this will it acquire an excellent appearance, and all existing wrinkles will smooth out and disappear.
If you still haven’t been able to figure out how to iron a leather jacket, or you’re not afraid to iron a valuable item yourself, it makes sense to turn to a specialized dry cleaner or atelier, where the procedure will be carried out efficiently and as carefully as possible.
How to iron a leatherette jacket?
Many people are interested in how to iron a faux leather jacket. This is due to the fact that currently artificial material became widespread. Created faux leather from several types of materials that have their own characteristics when ironing. They will need to be taken into account when performing this kind of procedure, otherwise you may simply ruin the thing.
Ironing should begin by turning the jacket inside out.
There are several common and gentle methods for ironing leatherettes, and almost all of them repeat similar care methods used when handling products made from genuine leather. To begin with, you can iron such a product with a regular iron. The ironing temperature in this case should not be higher than 30°C.
Ironing should begin by turning the jacket inside out. Next, it is wrapped around a rolled towel so that the surface of parts made of leather substitute cannot come into contact with the heated surface of the iron. After this, you can begin to carefully iron the jacket along its lining, while continuously moving the iron and not holding it for a long time in the same place.
Hang the jacket on hangers of the required width and sprinkle the item well with warm water, then leave it to “hang” for a day. Sometimes overnight is enough for the item to dry and smooth out.
Leather jackets are always at the peak of fashion; over the years they do not lose their relevance at all, and the quality of the products allows you to wear leather items for more than one season. In the spring, when it is time for outerwear, the leather jacket needs to be cleaned before storing until needed.
Very often, with the onset of cold weather, housewives, taking out leather items, are faced with the following problem: during storage they become wrinkled and look completely unattractive.
To an inexperienced housewife, it may seem like a tragedy that over the summer a leather item has become wrinkled due to careless storage in the closet, and now it is unclear how to return it to its decent appearance. In fact, there is nothing terrible or irreversible about this; a leather jacket can be easily smoothed out. There are several ways to do this:
- cold ironing;
- ironing with steam;
- ironing;
- ironing with a moisturizer (walnut oil, light skin cream, Vaseline).
Each of these methods is quite effective, you just need to choose the one that is most convenient to use.
Cold way
Due to the fact that this method is the most gentle, it is ideal for thin skin. This type of ironing is the simplest: we take out the jacket, hang it on hangers, which we place somewhere in an open space. A very thin leather item will become smooth in just 20-24 hours. Of course, cold ironing is the simplest, but at the same time it also takes the longest, and therefore is only suitable if the item is not needed immediately. If emergency measures are needed, you will have to use other methods.
Using steam
This method uses hot steam. If you have a special device - a steam cleaner, then it will be ideal, the main thing is to choose the intensity of steam emission and it is advisable to test its effect on the inside of a leather jacket. Most often, the instructions for using a steam cleaner contain information on how to iron leather items with it.
If you don’t have a steam cleaner, use grandma’s old method. Pour very hot water into the bathroom (preferably even boiling water) and while intense steam flows, hang your jacket over it. Literally 20-40 minutes and your item will get rid of all unwanted wrinkles. After this procedure, it is advisable to wipe the jacket dry and lubricate it with a special cream for leather products so that the exposure to hot steam does not cause the leather to shrink and become deformed.
Iron
Another easy way to do leather item smooth and attractive. In addition, ironing is convenient and familiar to any housewife. But in the case of a leather jacket, not everything is so simple.
It is strictly forbidden to iron the leather directly with the soleplate of the iron on the fabric; the leather will deteriorate from exposure to heat, even if the device is “on minimum.” Therefore, it is imperative to use a spacer between the leather and the iron. Wet gauze will not work; you need special paper - “craft” wrapping paper. The ironing process is as follows: set the iron to low (for particularly thin leather) or medium heat (for thick leather), wrap the jacket in paper and gently iron it. It is advisable to first iron the jacket with reverse side, where it is not so noticeable to make sure that the iron does not damage the product. Once the jacket is smooth, hang it on a hanger for an hour or two to let the leather cool.
Using a humidifier
This method can hardly be called fast, but in terms of efficiency and effect it is the leader among all existing methods. You need to apply a special moisturizer to the surface of the skin (it can be purchased in many stores for leather accessories). But if you don’t have such a cream on hand, nut butter or, at worst, Vaseline will do. Apply the cream to the dry surface of the skin, especially carefully treat rough folds. When you have wiped the entire jacket, take it out into the fresh air and leave it for several hours. When the jacket is smooth, it should be thoroughly wiped with a soft piece of cloth to remove excess cream.
The main thing that housewives need to remember is that you should never iron a leather jacket with a hot iron. No matter how much you are in a hurry, and no matter how urgently you need a leather item, it is better to use an ironing method that is appropriate for the type of leather.
It is also worth remembering that rough, thick leather lends itself best to steaming, cold method will also work, but it will take longer. Leather of medium thickness and roughness is best smoothed using an iron and “craft” paper. Set the iron to medium heat and test the heat on the inside of the jacket.
Very thin leather is the best and easiest to iron, but it is not very safe to use steam or an iron on it; it is better to give preference to cream or nut oil. And don't forget to wipe the skin dry after it has straightened.
To avoid problems with a leather jacket, remember the main rule: such things cannot be stored in a compressed position for a long time - they become very wrinkled. It is best to either hang them on hangers, or carefully fold them strictly along the seams.
Leather jackets, or in popular abbreviation “kozhanki”, have long ceased to be an attribute of rocker and biker themes. Couturiers successfully brought leather jackets to the fashion catwalk. Since then, this outerwear has been present in every person’s wardrobe. But sometimes it's hard to cope with the appearance leather product was on top. It’s sad, but leather tends to wrinkle, especially when it’s packed in a closet for the winter. But by the time spring arrives, it needs to be put in order in order to look 100% next season. You can smooth out products made of genuine leather and leatherette at home; there are many ways, but which ones are effective?
Is it possible to smooth out skin at home?
A leather jacket is usually called a thing made from natural material, leatherette, eco-leather. Let's see how to properly iron these materials, and whether they can be ironed at all.
Leather items
Durable but at the same time delicate material. In some circumstances, it is enough to hang the jacket on a hanger, out of direct sunlight. In a few days the material will straighten out. However, this is not the only option for smoothing out a slightly wrinkled leather product. Wiping with a damp sponge is no less effective. If the clothes are made of high-quality material, they will certainly smooth out. Owners of rough leather jackets will have to put in more effort. Experts say that it is possible to iron your skin, but it is better to try to avoid high temperature. It does not always have a positive effect on the quality of the product. Dry ironing and steam ironing are used for leather.
Leatherette and eco-leather
Both of these materials are artificial substitutes for natural leather.
According to the creators, eco-leather is significantly different from leather substitutes. This is a unique high-tech material, “breathable” artificial leather that does not contain PVC. The basis for eco-leather is cotton fabric, which makes up 75–80% of the total mass. Now there is also eco-leather made from a polyester or mixed base. The remaining 20–25% is a polyurethane film, and not PVC, which is typical for leatherette. Unlike the latter, eco-leather is more elastic and has increased wear resistance. In addition, manufacturers say that it does not require special care. When cleaning, you only need to use a damp sponge. What about ironing or steaming if the jacket has been lying on a shelf in the closet for several months? We can say with confidence that ironing and steaming different ways You can use eco-leather or artificial leather. But following certain rules.
Effective ways to smooth leather jackets and other items
It has already been said that a leather product needs to hang flat on a hanger for 2-3 days. In this case, it is necessary to fasten all zippers and fasteners to give shape to the clothing. But this method works if the skin is thin. What if you need to deal with folds and kinks on rough skin. I wouldn’t like to use an iron, but I have to. First, you need to straighten the wrinkled skin with your hands on the board, and then proceed to any of the following methods.
Dry ironing
The iron temperature regulator should be set to minimum mode, because the skin does not like high temperatures.
Do not iron the leather at high temperatures to prevent the product from deteriorating.
You need to iron the skin from the front side to straighten out the folds. But the hot surface of the iron must not come into contact with the material itself. For this, an “iron” is used, that is, fabric. It is located directly between the skin and the electrical appliance. The fabric must be smooth so as not to leave marks on the skin. It is also important to remember that you cannot move on to ironing another section of clothing until the first one has cooled down. Why is this being done? As soon as the uncooled skin moves and wrinkles, new creases form. And you will have to deal with them again.
You cannot use gauze when smoothing natural leather with an iron. Any “pattern” instantly transfers to the skin.
Do not iron embossed, laser-treated or rolled leather. You can only steam it.
Using steam
In this case there will be no need ironing board. Steam leather items only in a vertical position. You can hang clothes on a hanger and attach them to a door or chandelier. The main thing is that there is sufficient lighting. After all, it is necessary to get rid of all possible flaws. In order for the steam to effectively treat creases, the device must be turned on at maximum power. And it doesn’t really matter whether you use an iron, a steam brush or a steam generator. But the thing should be smoothed out, not deteriorated. Therefore, you need to ensure not only that the device does not come into contact with the skin. He should be at a distance of about 15–20 centimeters from her, no less.
Do not keep the steamer at a distance of less than 15 centimeters from the skin.
Products made from smooth leather are steamed from the front side. And clothes with embossing, laser processing and rolling - from the inside. There is no need to turn it inside out. Just hang it on a hanger with wide hangers.
You need to make sure that the stream of steam from the iron or steam generator is uniform, otherwise drops of hot water will fall on the skin, which will lead to streaks on the surface.
When steaming, hot water should not come into contact with the skin; it will cause streaks to form on the material.
Traditional methods
You can smooth out a leather item not only by technical means. If in home medicine cabinet Vaseline is stored, and there is nut butter on the shelf in the bathroom; they can be safely used to straighten a leather jacket. Only separately. Vaseline or oil is applied to small quantity on the folds. You need to wait time for the skin to absorb the product. Excess is removed with a napkin. Now you need to carefully straighten the crease with your hands.
Eco leather should level out
A huge number of things are now produced from eco-leather: jackets, cardigans, skirts. To form folds, just sit on a chair. But creases are unlikely to decorate clothes, which means you need to get rid of them. The sooner, the better.
Unlike skin that does not like water splashes, the artificial analogue is quite tolerant of such procedures. First, the item is turned inside out and placed on a hanger. Spray with warm (but not hot) water from a spray bottle. The lining is moistened evenly. After this, the eco-leather should dry. The wrinkles will smooth out.
The disadvantage of this method is that stains may appear on clothes. Therefore, experts advise using distilled water for smoothing.
The second method (folk) is used not only for eco-leather, but also for other artificial and natural analogues. The jacket is hung on a hanger with wide shoulders. You need to fasten all the locks and fasteners. A tap with boiling water opens in the bathroom. The jacket should be hung near the source of steam, but to prevent water from getting on the clothes. The item should remain in such a bath for about an hour. After which the eco-leather is thoroughly dried.
Ironing from the inside out
If a genuine leather jacket is ironed from the front side, then this number will not work here. The product must be turned inside out. But “ironing” will undoubtedly be needed. But with the choice of fabric for it, you don’t have to be tricky. Both smooth cloth and regular gauze will do. If it is cotton material, then it is not necessary to moisturize it. Then you should use the steam generator function built into the iron. Since eco-leather is still an artificial fabric, you need to choose an ironing program with a minimum temperature. For cotton - 140 degrees, for cotton with the addition of polyester an even more gentle mode - 110 degrees. And steam effects on the material should be as short as possible.
The temperature of the eco-leather iron should correspond to the ironing mode for cotton or cotton and polyester.
The folds will come apart under pressure
As a press you can take:
- books (a couple of encyclopedias)
- a container filled with water;
- a stack of magazines;
- brick packed in a plastic bag.
The eco-leather is straightened with your hands on a flat surface. After which you need to level the lining so that internal folds do not form. Cover with a smooth cloth to avoid marks on the skin. Place the press on top, carefully making sure that no new folds or bends appear. The item should be under pressure for 10–12 hours. After which the product must be hung on a hanger with wide hangers. In another day, clothes made from eco-leather will look like new.
Straightening leatherette at home... and on the street
There is no typo here. Indeed, leatherette can be smoothed not only within the home.
However, it is worth talking first about ironing. As with eco-leather, the product must be turned inside out. It is necessary to ensure that the folds of the material do not touch each other. Otherwise, such a “adhesion” will be difficult to separate. If there is no lining, or it is very thin, you need to lay cotton fabric on top. But the choice of temperature comes as a real surprise. The iron is set to the silk setting. And the steam function is turned off. You need to iron with light movements, barely touching the fabric. After ironing, the item must be immediately turned right side out and given volume - put on a mannequin. Or place a small pillow inside your clothes.
Before you handle the iron, you need to read the label. Some types of artificial leather cannot be ironed.
Leatherette does not steam on a hanger
This artificial material is steamed on a mannequin or roller placed inside the product. Clothes must be given volume. Therefore, steaming on a hanger is not suitable for leatherette. You can also put the jacket on a pillow. After all, not every one of us has a mannequin at home. Folds and creases are sprayed with steam from a distance of 15–20 centimeters, as is the case with leather. But it only takes a few seconds to steam. The item should cool down over the next half hour.
When steaming, you should not touch the leatherette with your hands - stains will remain on the material.
If there is no steam generator, but there is...a hairdryer
Surprisingly, a hair dryer will be an excellent assistant for straightening artificial leather. Of course, it will not be possible to set the exact temperature regime. But it’s quite possible to set up the supply of warm rather than hot air.
When leveling the leatherette, the hairdryer should be kept at a distance of 30 centimeters.
To smooth out the leatherette, you need to go for a walk in foggy or rainy weather. Yes, yes, put on a jacket with creases and wander through the streets sparkling from the rain under an umbrella. First, you can breathe fresh air, and secondly, due to increased humidity, the artificial leather will smooth out in about 2 hours. Straightening will occur due to the fact that the external environment will moisten the material from the outside, and the body will warm the clothes from the inside. A kind of greenhouse effect is created around the leatherette.
A small amount of glycerin and water in a 1:1 combination will work a real miracle. You can wipe the folds with this solution. Or spray the leather surface with the solution. Then iron it carefully from the inside with an iron. The jacket is hung in a place where there are no drafts until it dries completely. It is better to carry out the procedure 2-3 times.
Items that are difficult to smooth out
How to remove creases from a leather jacket collar
You can, of course, take the item to a leather workshop. In a day, or even two, the jacket will return home with a smoothed collar. Many sites advise ironing this item of clothing through 2 layers of gauze. But as it turned out earlier, you can’t do this if you don’t want to become the owner of a strange design on your jacket. And here another wise recipe from our grandmothers comes to the rescue:
- Brew starch, the ratio of water and starch is 1:1. The consistency should resemble jelly;
- pour the cooled starch into warm water;
- soak a cotton pad in the solution;
- without squeezing, go over the skin creases;
- dry without exposing to direct sunlight;
- iron slightly damp, covered with a smooth cloth.
Skin with defects is smoothed out carefully
After all, scratches from a cat’s paws can “creep” further, and a small, inconspicuous hole can melt. In fact, there are, of course, many more defects. The product must be inspected before ironing. Torn areas will need to be stitched up to prevent the edges from curling under the influence of humidity and temperature. If glue stains or paint blots are visible on the skin, under no circumstances should you use an iron or hair dryer.
You can use castor oil. A small amount of it is applied to a sponge and treated the skin. To prevent oil stains from forming on white skin, after treating with castor oil, wipe the area with a soft soda solution: 1 teaspoon of soda per 100 ml of water. Then you need to walk over the surface with a smooth cloth. But the most gentle smoothing options would still be steaming in the bathroom or a leather workshop.
A winter leather jacket should remain comfortable
Most often, the filler and insulation nowadays is padding polyester or synthetic padding. True, natural down should not be excluded either. In addition to the fact that leather itself is a delicate material, it is necessary to exclude mechanical effects on the insulation. It cannot be placed under a press, because the insulation layer gradually becomes thinner. This causes the jacket to become less warm. If fur is used as insulation, you need to determine whether it is sewn tightly into the jacket. No - then you definitely need to unfasten it. In any case, clothes must be hung on a hanger and fastened. After all, according to experts, it is the steam generator that will be able to level out deep, complex creases formed due to the thick layer of insulation inside. If it was not possible to completely smooth out the folds, you should seek help from specialists.
The methods described in the article are the most effective at home. In addition, they are budget-friendly, which is nice for any housewife. If traces of bends or folds are slightly visible after applying the tips, it’s up to you to decide: try several methods in turn or take the item to the dry cleaner.
Leather is a fairly flexible material, so it is difficult to wrinkle. However, it happens that products are folded and stored in this condition for a long time, or they spend too much time in outerwear, wrinkling it. That’s when the question arises: how to iron a leather jacket. There are several fairly well-known methods, and now we will describe them.
Dry ironing
If you decide to iron your skin, you should follow several rules. We advise those who have no idea how to iron a leather jacket at home without going to the dry cleaner to pay attention to them.
- Set the warm-up temperature low.
- Iron from the front side, carefully laying the product on the board. You can iron from the inside out if the lining does not interfere with the process.
- Use a gasket made of wrapping paper or special fabric so that the surface of the iron does not come into contact with the skin. Choose a smooth fabric with a barely noticeable structure - gauze and kitchen towel cannot be used. Leather is a soft material and the texture of the fabric can be imprinted on it.
- Steam is not used for this ironing.
- Use the iron, pressing it slightly, and periodically monitoring the result of the process.
- It is necessary to iron each crumpled area separately, and only after the previous area has cooled down, move on to the next one.
- Difficult places (sleeves, shoulders, some decorative elements) can be ironed using the small board that comes with the large ironing board.
Using a steamer
Let's learn how to iron a leather jacket using an iron and steam. Modern irons are equipped with steam generators. They can be used to iron a variety of things, including leather:
- The jacket is placed on a hanger and a heated iron is brought to it.
- You need to keep the iron at some distance from the skin so as not to touch it. A distance of 15 cm will be quite enough.
- Turn on the steam generation mode and treat the surface with it.
Instead of an iron, a steamer helps to smooth out the product - a useful device for home use.
In this way you can easily straighten thick leather, but how can you iron a leather jacket made from a more delicate material? There are gentle methods for this.
Gentle ways
To smooth out wrinkled skin, you need to hang the product on a hanger or on the back of a chair and leave it in this position for several days. She will accept it herself the required form without the influence of extraneous factors.
Thin skin returns to normal in just a couple of days, while thick skin takes about a week to smooth out.
In this way, you can iron items with slight bruises, however, if we are talking about fairly stable marks from bending, then you need to look for other techniques.
Another way to smooth out wrinkled areas is to use castor oil or Vaseline. These substances soften leather products well, so they straighten faster. In addition, they use walnut oil, which is called “walnut oil”. It dries quickly and contains fatty acids that have a positive effect on the leather surface.
Steam solves problems
It's no secret that steam can be used to iron heavily wrinkled items, so why not apply it to the skin. True, this must be done carefully.
Go into the bath, fill a basin with hot (boiling water) water and hang your jacket over it on hangers. The steam will help the skin quickly return to its normal smooth state. The doors in the bathroom will have to be closed so that the steam does not dissipate and the water does not cool down too quickly.
This method is often used at home because it is simple and quite effective. Instead of using a basin, you can turn on a hot shower or draw water into the bath. It is important to prevent the skin from getting too wet so as not to damage the jacket. It is advisable for the jacket to be at room temperature, then there will be less condensation on it. The procedure time should be within an hour.
Let's summarize and analyze the effect of this or that home remedy.
If your jacket is especially dear to you, and you do not want to iron it yourself, or expose it to steam or any other means, then you can take it to a service center. Service workshops are located at the ateliers where leather goods are sewn.
Proper storage
In order not to agonize over the question of how to iron a leather jacket, you need to store and wear it correctly:
- The jacket should hang on hangers in the closet, and not lie folded on a shelf.
- There should be enough space around it so that there is no pressure from other things.
- After you enter the room where you work or study, take off your outerwear and hang it on hangers. They should be the same size as the width of the jacket's shoulders.
If you have to iron your clothes, then do not rush, perform each action carefully, because it takes time for the skin to regain its shape. Periodically look through your wardrobe and put things in order.
leather dresses
Probably, each of us has encountered a problem with leather products. They often lose their good appearance, become wrinkled after lying in closets for a long time in summer or winter, and we do not know the appropriate way to iron such things and what products to choose. In addition, it is not always possible to use dry cleaning services and you want to do it yourself. Especially for this, we have chosen several simple but effective ways to iron leather products and maintain their attractive appearance for a long time.
"Cold method" as an ironing method. This is the easiest way to straighten your leather item. All it takes is hanging the right thing on a hanger and let it stretch out. If your product has creases or unwanted folds, this is the easiest and most effective method correct deficiencies. But this method has its drawback - in order to iron a jacket or raincoat in this way it will take several days (on average a week). But for products made of thin material, 1-2 days will be enough.
Steam straightening. Steaming your leather product is very effective. Using steam is very simple - fill half the bath with hot water and hang the desired item over it. But the most important thing is to monitor the level of water evaporation. Excessive steam generation may damage the product. You can also use a manual steam generator for steam treatment, which is used in many clothing stores. The optimal height of the device is 10 centimeters. This device can be replaced with an iron that has the same function.
Vaseline and nut butter as a leveler. This method is the most gentle of all, although few people know about it and are rarely used. All you need to do is soak a cotton swab or pad in Vaseline and apply the problem areas on your leather item or all of it. Then, hanging it on a hanger, take it out for a couple of hours in a well-ventilated place (on a balcony, for example). Vaseline can also be replaced with nut oil, but it will cost much more, but the effect will be the same.
How to iron a leather item. It is not recommended to use an iron to smooth leather items, but there are a couple of ways when its use is appropriate. In this case, the heating temperature of the iron should be minimal, and cover the product with a thin layer of kraft paper (this paper is used for pasting homemade cardboard furniture) or other fabric (for example, chintz) and move the iron over it. But in no case does it hurt your skin. Can be ironed from the inside out. You should not use a steam generator during this process, and it is also not recommended to wear a freshly ironed item immediately after the procedure. Let it cool for a while. It is worth remembering that you only need to iron the leather from the inside out, otherwise there is a high risk of damaging the material and ruining the item.
Use a press. Leather is not fabric and you should not achieve a perfectly smooth material. The remaining wrinkled areas will smooth out on their own after hanging on a hanger for a couple of days. But if you want to get rid of wrinkles faster, try using a press. Place something flat and heavy on the dented area. Thick one is perfect big Book. Leave it for several hours, after which this area will smooth out perfectly and be even.
