Knitting a hat with earflaps using photo and video master class

Knitting a hat with earflaps using photo and video master class

Today, knitted hats with earflaps have become extremely popular. Almost everyone likes them, so women and men wear them with pleasure. Many needlewomen want to know how to knit women's and male models. But mothers are interested in how to knit a fashionable and warm earflap hat for a little boy or teenage girl. Knitting any of the patterns will not seem too difficult even for beginner needlewomen.
To make any master class on making this type of hat, you will need yarn and knitting needles, as well as diagrams and photos. In addition, you need a little time and a lot of desire to successfully knit any model. Now we will show you the first master class with step-by-step photos.

Master class on knitting a simple pattern

Unlike the above photo, in which you see a hat with earflaps knitted with the “Rice” pattern, the knitting of the model in this master class will be done in garter stitch.



This is a men's model, because it is somewhat rough and very simple, without unnecessary reliefs. Before starting knitting, this master class asks you to measure the circumference of your head, which in our case was fifty-five centimeters (cm). For one ear you need to cast on eight units, after which we begin to knit with garter stitch. During the knitting process, we add two loops in each row, at the beginning and at the end of the row (P). Having reached twenty-two units, we will continue knitting with garter stitch without additions, until the length of the ears is twenty cm. At the same time, their width is twelve cm.


In total, we will need to have on the knitting needles the number of Ps, which includes thirty-nine pieces for the front, forty-four Ps for two ears, and thirty-six pieces for the back of the head. There will be a total of one hundred and nineteen units on the knitting needles. First, we cast on half of the rear P, that is, eighteen pieces, then the side loops, then thirty-nine front units, loops of the second ear, and eighteen pieces of the back part. When all these Ps are together on the knitting needle, we knit five rows of them with the main pattern. After this, we will create the desired depth of the earflap hat, that is, fifteen cm. In the upper part, we need to knit a noticeable narrowing of the fabric. The pattern of this narrowing consists of knitting one of the two P along the edges of the product in the first row. In the next P we will subtract eight pieces. After completing ten R's we should have fifteen loops that need to be tightened together. The last thing we knit is the lapel of the earflap hat. In front, we cast on thirty-nine loops along the outer row, and use the main pattern to make the desired length of the lapel. You can knit small curves to improve it appearance. To do this, we knit two Ps together in each row. We make such decreases in the next five rows.

Knitted women's hat with earflaps

The master class shows models of hats for women. In it you will see some photos of models, as well as a video tutorial. Pay attention to the photo, which shows a very fashionable women's hat with earflaps, knitted with ordinary knitting needles.

The principle of handicraft and the scheme of work are preserved almost exactly as in manufacturing male version. In addition, the men's, women's or children's model is very similar because they all have ears and a lapel. Therefore, each of them is performed approximately according to the same scheme. The only differences are the patterns. Among other things, models differ in the presence or absence of decorations. Among them, we note beautiful crocheted flowers, as in the photo below.

Can also be decorated ready product original buttons or a brooch.




Video master class demonstrates knitting patterns for women. It contains a description of the basic star pattern that was used for women's hats earflaps. It will require a set of loops that are a multiple of three, plus 1 and plus two edge loops. The vertical repeat of the pattern is four rows. For work, we will prepare two hundred grams of yarn and knitting needles number three. The knitting density is twenty loops in ten centimeters. For each ear we will dial six units, and make additions in the front rows, one on each edge. When the number of P reaches twenty pieces, we knit a length of seventeen cm. After that, we will make a complete set for the entire hat. The first seventeen pieces of the set are intended for half of the back of the head. Then there are the loops of the first ear, thirty-seven units of the anterior zone, the second ear and half of the back of the head. In total there were one hundred and eleven pieces on the knitting needles. Then you need to knit all the loops together using garter stitch, making four lines. After this, we begin the main pattern of the earflap hat. We knit a depth of twelve cm, required for a hat with earflaps, after which we need to knit its upper part, gradually decreasing the loops. Next comes the making of the lapel, for which we collect thirty-five units at the bottom of the forehead area. After casting on, we knit a lapel of the desired length and bind off all the loops. When finishing the needlework, we cut pieces of thread for the fringe, shape it and fasten it at the bottom of the ears. This completes the master class, and the knitted women's earflap hat is completely ready.
Video: Tutorial on knitting a hat with earflaps

How to knit a hat with earflaps for a boy

Now we will look at how to knit
earflaps. This earflap hat is more intended for a boy, but this is not at all necessary. The earflap hat has a double layer of knitting on the sides. In addition, it has fabric insulation, hemmed on the reverse side. It is suitable for the coldest time of the year. The product is decorated with white trim on the lapel and along the edges of the ears. Against a bright background of blue color The white trim looks great. For needlework you will need two types of mixed yarn, smooth colored and twisted for the lapel and tying the ears. The head circumference in this case is forty-eight centimeters. We carry out the work with knitting needles number five. The knitting technique for this model of a hat with earflaps for a boy differs from the methods that we discussed in previous lessons. To knit the first element, you need to cast on twenty-two loops, and knit a thirty-six cm rectangular fabric with the Arana pattern.

The width of the rectangle is twelve cm. This detail will become the central zone of a boy’s earflap hat, that is, it will form the part of the hat between the forehead and the back of the head. After this, in the center of the fabric we will pick up twelve new units from the edge loops and begin to knit the first ear of the hat. The pattern is the same as in the first part, that is, “Arana”. We knit eighteen cm straight, after which we add a loop on both sides. Next we knit seven cm out of fourteen loops. After this, reduce the loops to eight, and close the row. Now from the last closed P we take the first P of the second layer, and knit everything in a mirror image to make a double fabric. We knit the second ear of the earflap hat in the same way as the first. We fold the parts and carefully sew the hat together. Now all we have to do is tie it with textured yarn using a crochet hook. In the forehead area we crochet the visor using the same textured thread. A boy's earflap hat is decorated with plaits with pompoms. The harnesses are knitted using three knit stitches and sewn to the ears and visor. When you have finished all the binding and made the visor, the hat for the boy can be considered ready.
Video: Knitting a hat for my son with knitting needles

Photo master classes

Comments

Related posts:

Knitting socks and slippers from photo and video master class

An original model of a hat that warms your ears and will prevent you from freezing. Knit this product yourself using the instructions with photos and diagrams. This necessary thing in cold weather. You can knit a hat with earflaps for yourself and your family; you will not remain indifferent to this product. Everything is quite simple, you just need a little time and yarn with knitting needles.

To work you need:

1. choose the yarn you like for work. The thread should be tight, not torn, color to your taste. Choose the composition of the thread (wool, cotton, mohair, acrylic, polyamide) yourself;
2. knitting needles (2 pieces), thickness approximately equal to thread;
3. scissors.

Instructions

Before you start making this warm and beautiful hat, you need to do the following:

Knit a centimeter by centimeter square and count the number of stitches needed for it. In width and length. With this you will not be mistaken in calculating the size during manufacture, but you will need to knit the entire product with the same density.

When working, we will use garter stitch (all rows are knitted).

Below is a knitting pattern for the knit stitch:
Purl loop pattern:

You can simply slip the first and last stitch of the row or purl them (it’s all up to you). In any case, the knitting will be garter stitch.

Let's get started:

We measure the circumference of the head. We got 55 cm, you follow your measurements, increase or decrease the number of loops.

We knit the ears:

1. cast on 8 stitches on two knitting needles, then start knitting in the manner described above ( garter stitch from facial loops), in this case you need to add one loop to each row at the beginning and at the end (two loops for the entire row);
2. as soon as there are 22 loops, we stop and no longer add two loops. Now we continue to knit with regular garter stitch. You need to knit to your intended ear length (ours is 20 cm). The width turned out to be 12 cm.

Let's move on to the main part

The front part of the hat will have 39 loops (20 cm). Two knitted ears with 22 loops each (12 cm). The back of the head is 36 loops (this includes two for the edges) (19 cm).

Let's calculate how many we get in the end: 39 + 22 + 22 + 36 = 119 loops.

Let's first cast on the knitting needles 18 loops (36 back part: 2), after that it's the turn of one ear, then 39 loops of the front part, the second eye, the remaining 18 now. We knit this sequence in garter stitch for about 5 rows to secure it completely.

Now we knit until the depth of the hat is sufficient for us (we knitted 15 cm).

You can use the diagram presented in the pictures. Add 18 loops to the ears on the sides and knit. Then, make the front. Having connected the parts, start knitting the top.

Knitting the top of the hat

This requires a fairly strong narrowing. First, reduce by 2 loops (on the sides 2 loops into one). Then we go to decrease: the next row we gradually reduce 8 loops in it (during the row we knit 2 loops into one at some equal intervals and leave 2 edge loops at the end; then 7 loops... Thus, we reach 2. We should have left at the end work about 15-17 loops after knitting 10 rows, we tighten the remaining loops.

Cap lapel.

We cast on 39 loops in the already prepared place (in front of the hat) to the edge and knit with garter stitch the length we need (you can try on to choose best option during work).

Are you just learning the art of knitting and want to create something simple and very useful? A stylish, warm and cozy knitted men's hat is where a young (in other words, not entirely experienced knitter) can begin her creative journey. This product will be a great gift for your husband, boyfriend, son or brother.

In this article we will introduce you to the most current models knitted hats for men, we will demonstrate diagrams with descriptions and photos, and also show simple video tutorials.

“Knitted” fashion 2018-2019 is natural and soft yarn, unobtrusive colors, simple patterns, large knit and comfortable hat models. We have already told you what they will be like. To create men's hats, we will also show you diagrams and drawings for beginners, we will demonstrate the form oh and we’ll help you choose suitable model.Striped hat knitted in stockinette stitch, suitable for almost any man. A thick elastic band at the beginning of knitting will allow the headdress to stay well on the head.

Another option for knitting a men's hat is suitable for a novice craftswoman.

The beanie hat is suitable for both men and women, because she looks beautiful and stylish with any outerwear. We talked about this earlier in the blog and showed a detailed and informative master class. IN men's wardrobe such a hat will also come in handy, especially if your man is a fashionista and a fan of casual style.
Very popular among fans sporty style enjoys hat with zigzag pattern— it makes the model voluminous and warm.
A knitted cap fits under a coat or classic suit. With a down jacket, this model will also look natural and beautiful.

Suitable for men as well as women hat with fancy pattern. True, the pattern should not be too intricate and “feminine”.

A “cheerful” striped hat will cheer you up in frosty or rainy weather. Contact your to a loved one such a rainbow accessory.

How to knit a men's hat with earflaps?

The modern hat with earflaps is not the archaic fur hulk that was worn a couple of decades ago. This neat, warm and stylish headdress, which your man will wear with pleasure.

A men's earflap hat reliably covers the chin, neck and ears, and if it is treated on top woolen threads or faux fur, then it will also be extremely warm.

This hat model is made using knitting needles and crochet according to the pattern below.

A chic hat with a pattern will greatly enliven a man's look, which is obviously doomed to be boring, dull and definitely “masculine”. Men also deserve a bright image, and beautiful hat will be a great start to your fashion journey.

Men's winter earflaps hats are knitted according to the most simple circuits, for example - garter stitch. We will knit this beautiful hat together on straight knitting needles, size 4. For work we will need approximately 100 grams of yarn.

We will cast on the first twelve loops on a large needle, and having knitted another row, we will begin to decrease a loop on each side. Having reached 20 loops, we stop adding, which should be “crowned” with a round corner (see photo).

We knit garter stitch 14 rows, in the same 14th row we add 8 loops on one side. Using the main pattern, knit another 20 rows. Make 2 pieces of the same size, with a mirror image.

For a separate piece, cast on 22 stitches, knitting one row, start adding one stitch on each side until the number of loops reaches 30. In the next 24 rows we knit in garter stitch. Place all three pieces on double needles or long straight needles.

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans. Cute hats will help complete the look with patterns, pompoms or “ears”.

Clothing stores offer many models of hats - men's, women's, children's. However, it is worth spending time and money to find an accessory that matches your overall look. Needlewomen can save money and at the same time knit suitable stylish hats for the whole family. The main thing is to understand all the intricacies of the scheme and understand general principle work. How to knit a hat with knitting needles. You will find knitting patterns for women's, men's, and children's hats with descriptions in this article.

We knit a hat for women and men

Before knitting, you need to choose the right yarn and knitting needles. Yarn depends on the season and model. Winter hats are knitted from yarn with a high wool content, spring hats are knitted with acrylic. Bulky yarn is suitable for models with large patterns and coarse knitting. Thinner yarns are well suited for tight knitting with small patterns.

Hats are usually knitted on circular needles - this way the product will be smooth, no seams. The elastic band is knitted on thin needles for density. When moving on to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers to mark the beginning of the row and the loops needed when working, as well as a needle, hook and an additional curved knitting needle for braided patterns.

Before you choose and start knitting a suitable model, you need to understand a few general rules, which will be needed when knitting any hat.

How to add stitches on a hat using knitting needles

Usually the increase is made in the next row after the elastic band, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows depending on the model.

You can add loops in the middle of a row in different ways. The most convenient methods of increasing are from the previous row and using a yarn over.

You can make a loop from the previous row from a broach, that is, a thread between two loops, or from a loop from the previous row. Broach pounces on left knitting needle and knit the front one - an additional loop is obtained.

How to knit a hat with knitting needles. Knitting patterns for women's, men's, and children's hats with descriptions are not difficult to find. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation.

If you pick up, pull out and knit a loop from the previous row with your left knitting needle, you will also get a new loop. This will happen most unnoticeably - it will be difficult to find places for increase in the overall mating.

Using a yarn over, a loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop for back wall purl. Otherwise, the addition will stand out as a small hole between the threads.

Hat in stockinette stitch (garter stitch) with knitting needles

Beginners knit simple hats using stockinette stitch or garter stitch. This is the most simple ways work.

Knit stitch involves alternating rows of knit and purl stitches. The canvas will have a smooth vertical pattern on one side (front side), and a pattern in the form of transverse waves on the reverse side (wrong side).

Garter stitch is done exclusively with knit stitches, regardless of the side. The result is a simple relief pattern.

Note! The stockinette surface tends to curl up at the edges. To prevent this from happening, first knit an elastic band. You can also “secure” the edges by crocheting them.

How to finish a hat with knitting needles

After the hat is knitted to the desired length, you need to start narrowing the crown. To do this, you need to decrease a few loops in the following rows.
Decrease - knitting two loops together. As a rule, when knitting a hat, rows with decreases alternate with rows knitted according to the pattern. This reduces the number of loops through which decreases are made.

For example, first every 10 loops, then every 9, then every 8 and 7 loops. When there are no more than 20 loops left, pull the thread through them and pull off. This completes the knitting of the hat.

Knitting patterns for hats: diagrams and descriptions

There are a lot of knitting patterns. A variety of braids, braids, diamonds, “bumps,” and “leaves” look good on hats. Also, the main fabric of the hat can be knitted not only with satin stitch, but also with a certain pattern, for example, “rice” or “honeycomb”.

“Rice” is a simple pattern that makes the product airy and embossed. “Rice” is used to knit not only hats, but also snoods. The pattern is well suited for both bulky and thin yarns.

The knitting principle is very simple: the front stitch alternates with the purl stitch. In the next row, the knitting changes: knit is knitted purl, purl is knitted.

“Honeycombs” are knitted with a thread thrown over. To do this, you need to cast on an even number of loops. Knit a knit stitch in the 1st row, then put the thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created like this: purl, throw the yarn over onto the right knitting needle, knit 2 loops, transfer, knit 2, etc. Row 3: yarn over, remove the loop, knit together with the yarn over, repeat the rapport to the end. 4th row: knit 2, yarn over, repeat again until the edge. Row 5: knit a yarn over and a loop, slip a double crochet, repeat. 6 knit like 2. From the 7th row, the repetition of rapport begins - rows 3-6.

“Braid” is the most common pattern for hats and the simplest, especially for beginners. For this you need to prepare an additional short knitting needle.

As an example, cast on 14 stitches in the usual way and knit rapport:

• remove the edge;
• purl 2 stitches;
• knit 8;
• knit the remaining loops purl;
• repeat steps 1-4 3-4 times (the length of the braid depends on the quantity);
• repeat step 1-2;
• throw 4 loops onto a short knitting needle and leave before knitting;
• knit 4 knit stitches of the row;
• return the loops from the knitting needle to the left one and knit them with knit stitches (if convenient, you can knit them immediately with an additional one);
• finish the row by knitting the purl loops;
• repeat rapport (points 1-9).

Note! The number of loops must be even so that the loops can be equally divided into two parts.

Braids can be knitted different lengths and width, as well as tightly to each other or through purl loops, depending on the model and yarn. More dense and thin braids Knit every 3-6 rows on 4-8 loops. Wide braids It is best to knit every 10-15 rows on 10-14 loops.

There are many other warp knit patterns. When choosing a pattern, you need to pay attention to its density: the denser the pattern, the better the heat will be retained, which is important for winter hats. Summer and spring hats allow mesh or openwork patterns(“ladder”, “shells”, “peacock tail”, “leaves”, etc.).

How to knit a winter hat for women (with description)

Winter hats are denser, softer and more voluminous than spring hats. To knit them, you need yarn containing at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Takori hat made of mohair knitted (knitting pattern)

A takori-style hat can be considered a universal model, since it can be worn in different variations: as a stocking cap, with one or several cuffs. Takori is a very soft and voluminous hat. This pattern is knitted quite simply with English rib and will appeal to beginning knitters.

To create a takori hat you will need Angora yarn (100 g/500 m), 4.5 mm circular knitting needles (can be knitted on two knitting needles), markers, and a large knitting needle.

The thread is folded in half(the beginning and end of the ball are connected) and 70 loops are cast on (head circumference 56-58 cm).

Knit rapport: yarn over, remove loop, knit, repeat. All even rows - yarn over and the loop behind it, purl, yarn over, remove the loop, etc.

Alternating rows, knit to the desired length (approximately 32 cm), and then change to a 1x1 elastic band: knit a loop with a purl crochet, 1 knit and then in the circle. Subsequent rows (about 3 cm) are knitted according to the pattern.

Work through a decrease row, knitting every 2 stitches together.

Cut the thread about 10 cm from the needle and thread it through the needle. Pull the loops and secure the thread.

Knitted hat with a lapel

A classic hat with a lapel is knitted with an elastic band 1x1 or 2x2 (knit and purl). After knitting 5-7 cm with an elastic band, you need to change the knitting in a checkerboard pattern: knit the front loops with purls, and the purls with the front ones. In this way, a line of inflection of the lapel will be outlined, along which the edge can be folded. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! An elastic band made from soft yarn stretches well, so it is important to make it the size of your head or a little narrower.

When the elastic is completed, you can move on to the main part of the hat and knit it with the desired pattern.

Double knitted hat

This warm hat in two layers. There are quite a lot of options. The easiest way is to knit in satin stitch on stockinette and circular needles, starting from the crown. In essence, you should end up with a stocking closed on both sides.

Roll the thread into a ring and, inserting the knitting needles through it, cast on 12 loops, 3 loops on each knitting needle. You can also type it in the usual way, but then you will get a small hole in the middle. Knit a row with knit stitches.

Increase 8 stitches per row 12 times: 1st row - knit, increase, knit, increase, knit (so on each knitting needle). Subsequent even rows are knit rows. Row 3 – knit, increase, knit 3, increase, knit, etc. (inc on each needle after the first and before the last stitch). The result should be 4 wedges.

Once 24 rows are knitted, change the knitting needles to circular ones and start knitting in satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Decrease (guide by markers) 12 times: row 1 - knit, slip, knit, throw the previously removed loop over it, knit to 3 outer loops (to the marker), 2 together, knit, etc. There are 24 rows in total.

Tighten the last 12 loops with working thread.

Knitted thick yarn hat

Simple hats with a simple pattern are knitted from thick yarn quite quickly. Thick yarn is considered to be skeins weighing 100 g and no more than 140 m long. Accordingly, you will need large knitting needles from 8-10 mm, depending on the thickness of the thread.

Typically, 30-40 loops of thick yarn are cast on knitting needles and knitted in the round using garter stitch, ribbed stitch or satin stitch. There is no need to make any additions; the classic subtractions are made.

Knit a hat for spring with knitting needles for a woman - new models

In spring, you can get creative and knit not only warm ones, but also beautiful models hats

Knitted turban hat

A simple turban is knitted with English elastic 1x1 in a single piece of approximately 12x90 cm (you should get a narrow scarf). Having knitted the scarf to the desired length, close the loops in the usual way. Then the finished fabric is collected into a turban and stitched.

Try the scarf on your head, wrapping it like a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand which sections need to be sewn, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and on the sides on the wrong side.

Important to remember! To correctly calculate the size of the hat, you need to knit a sample of 10 loops for 10 rows, wash, dry and measure.

Women's hat knitted with description and diagrams

Knitting a beret from a hat is distinguished by mandatory increases in 1-2 rows after the elastic band. This will help expand the knitting to the desired diameter.

The elastic band of the beret should fit snugly on your head.. As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows from the elastic, uniform decreases are made.

Hat with English rib (2x2) knitted

This is a fairly simple model, similar in design to a takori hat.

You will need a relatively thin thread containing acrylic, for example, Alize Lanagold yarn (100 g/240 m), as well as 3.5 mm circular knitting needles and a needle.

How to knit:

1. Cast on a multiple of 4 stitches on the knitting needles.
2. Knit according to the principle of a classic English rib, but knit 2 loops each: 2 knit stitches, 2 slipped double crochet stitches, next row - according to pattern, etc.
3. Having knitted to the desired length, switch to 1x1 elastic: knit knit, 2 together with knit yarn over, purl and then in the round.
4. Knit the next rows according to the pattern(5-6 cm).
5. Make decreases as when knitting a takori hat.
6. Thread the cut thread through the needle and pull it through all the loops.

Knitted hat with braids (diagram)

There are many options for this model. In a simple, classic hat, braids of 4-6 loops are separated by 2-4 purl loops.

Cast on a multiple of 2 stitches on the knitting needles and start knitting 2 knits, 2 purls (2x2 rib) in the round. After 5-7 cm of knitting, change the knitting needles to thicker ones, switch to satin stitch and add loops every 3 loops.

To knit repeat for braids: knit 6 knit stitches, 3 purl stitches, 6 knit stitches, etc. After knitting 4 rows, knit the braid on the front loops, and then repeat the rapport from the beginning.

Having knitted to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decreases. Pull the last loops together.

If you alternate through an equal number of rows of braids with a knitting needle behind and before knitting, you will get a “braid”. For example, one row - 120 loops, one braid consists of 12 loops, respectively, around the hat you will get 10 wide braids.

10 rows are knitted in satin stitch, then a row with braids is made: remove 6 loops on the third knitting needle and put away for work, knit 6 loops of the row, and then loops from a short knitting needle. This is how the whole row is knitted. After the next 10 rows of satin stitch, the order changes: 6 loops on the auxiliary needle remain before work, and so on.

It is important to know! Braids slightly compress the diameter of the hat, so you need to add a large number of loops in 1-2 rows (there can be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a row “obliquely”, you need to try on the future hat: the pattern should not compress the head.

Knitting pattern for a Kubanka hat for women (with description)

The Kubanka hat is a rather original model, distinguished by its rectangular shape.. The complexity of this model is that when moving from the crown to the bottom of the cap, it is necessary to tie a roller.

For size 57, cast on 4 mm needles for 130 stitches. Knit approximately 4-5 rows with a 1x1 elastic band, and then, without adding loops, proceed to knitting the main part of the hat up to the crown (you can make a suitable pattern).

Make a roll by knitting 8 rows with a 1x1 elastic band. It is necessary to connect the 1st and 8th row: pick up the loops from the first row of the elastic band and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue knitting in satin stitch, decreasing 7 stitches in each front row (knitting without decreasing on the purl side). The result should be 7 wedges. Tighten the last loops with thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. However each model has its own characteristics, which can cause difficulties when knitting.

Knitted hat with ears

A cute simple hat with ears is knitted in garter stitch in the round or like a takori: English or classic elastic, but is not closed with decreases. Having knitted the hat above the crown, you need to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the “pipe”. To do this, you need to sew the top of the hat, starting from the center, from the wrong side (connect the wrong loops together). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the hat.

Beanie hat (stocking) knitted: knitting pattern

This is a simple pattern that even beginner needlewomen can handle knitting. Usually the “stocking” is knitted in garter stitch without patterns. This model differs from all others in its rounded top and quite long length(the top of the hat should fall off the head).

To knit this model you will need thick yarn, for example, “Nako Jersey” (100 g/74 m) or Trinity yarn “Melody” (100 g/100 m), 6-7 mm knitting needles, and a needle.

The stocking cap is knitted in vertical and short rows. To do this, you need to cast on 45 loops on one knitting needle (along the length of the hat) and knit 40 loops. The remaining 5 loops are not knitted and remain on the right needle.

Unfold the work and knit in reverse side garter stitch. In the 3rd row, knit 41 loops, leaving 4. In the 5th row, 42 loops are knitted, in the 7th - 43 loops, in the 9th - 44, in the 11th - 45. From the 13th to the 22nd row, knit stitches are knitted. The 23rd row is knitted as 1 and further (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the beanie should be slightly narrower than the lower part due to the wedges.

Repeat knitting until the desired width is achieved (5-7 wedges). After the last row, the working thread should be at the top (if this is not the case, knit another row). Close the loops with purls, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the hat lengthwise (bottom to top). At the top, thread the needle through the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on loops to size.
2. Knit in an elastic pattern of 2 knits and 3 purls.
3. Having knitted to the crown, make decreases in the circle on the purl loops: 1 purl, 2 together, etc. (you will get a regular 2x2 elastic band, knit according to this pattern for about 7 cm).
4. Make decreases on purl stitches (1st row).
5. Knit a row according to the pattern (2 knits, 1 purl).
6. Pull the yarn through the last stitches and pull off.

Gradient knitted hat

Gradient hats look unusual due to the smooth transition from one color to another. The secret of this knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times depending on the thickness. Having knitted the bottom of the hat, begin to gradually replace the threads with a different color: first change 1 thread, then 2, 3 and so on until all the threads “change” color.

You need to mentally calculate when to change the color. For example, if the working thread consists of 3 threads, then you need to mentally divide the hat into 4 parts: part is knitted in one color, part with 1 thread of a different color, part with 2 threads, part with a different color.

Knitted hat with pompom

The pompom beautifully complements the hat and can hide minor imperfections on the top of the head. The simplest pompom can be made using cardboard “donuts” or a special circle.

Cut out 2 circles from cardboard with round holes in the middle - “donuts”. Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the central hole is tightly wrapped with thread, you can use a needle.

The tightly wound threads are cut in a circle (the cut is made along the edge) to the cardboard. Move the cardboard rings slightly apart so that you can conveniently pull and tie a skein of thread in the middle. After this, the rings are removed or cut, and the pompom is formed into a ball. Protruding threads and irregularities can be trimmed with scissors.

Knitted men's hat (diagram with description)

There are models of hats suitable more for men than for women, for example, a hat with earflaps or a hat-helmet.

Ushanka hat knitted

Hats with earflaps, depending on the thickness of the yarn and lining, can be either winter or demi-season. The main difficulty in performing this model is tying the “ears”. This is where knitting begins, so that the hat turns out smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army cap of the White Army. Initially, it was exclusively a men's headdress.

A simple one-sided hat with “ears” is knitted in garter stitch (can be knitted in satin stitch). To work, you will need yarn of medium thickness (for example, 100 g/120 m), circular and regular knitting needles 4-6 mm, and a needle.

First, cast on 12 loops on the knitting needles and knit 8 rows, adding 1 loop at the beginning of each row in the usual way. Knit 14 rows without increases. Cast on 8 stitches at the beginning of the row and knit 20 rows. Knit the second “eye” in the same way.

Cast on 22 loops and knit the visor 4 rows, adding 2 loops at the beginning (there should be 30 loops on the knitting needle). Next, knit 24 rows without increases.

Connect the knitted parts using circular knitting needles, knitting the loops of one “ear”, then the loops of the visor and the loops of the second “ear”, close the knitting into a ring. Knit in the round for approximately 36 rows.

Decrease evenly across rows of 7 stitches. When 20 loops remain, decrease in each loop (10 loops remain). Pull the thread through and tighten.

Knitted helmet hat

This pattern is quite difficult to knit, as it ties the head from the crown to the shoulders.

Usually, the helmet is knitted from top to bottom. First, stitches are cast on 4 double needles (8-12 stitches) and rows are knitted in the round with increases at the beginning and end of each needle. When the circle is large enough in diameter (around the head), you can switch to circular knitting needles and knit further in the circle without increasing to the forehead line.

Transfer the loops across the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, cast on additional loops, close the circle and knit the neck. For the shirt front, cast on additional raglan stitches at the top and knit to the required width.

Tie the front part with an elastic band and close the loops.

Knitted sock hat

The men's sock hat is knitted like a women's beanie hat., that is, you can start from the side and knit in short rows.

There is another option: knit in the round with a thick 1x1 rib, and then divide the stitches in the row into 3-5 wedges, place markers and start decreasing through the row, focusing on the markers. Tighten the remaining loops with thread.

Hat made of thick yarn with knitting needles (knitting pattern)

From thick yarn for men you can knit similar to female models. The only thing difference - drawing and pattern. For men, a more strict, geometrically correct pattern will suit a coat or jacket.

Majority men's hats large knit knitted with elastic bands, garter stitch, satin stitch, vertical braids.

It is important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool clothing should not be twisted and can only be dried in a horizontal position. This will help avoid deformation of the product.

Children's hat knitted

Baby hats often resemble bonnets, meaning they cover the entire back of the head and are tied under the chin. This is the main feature of such models. Otherwise, hats for children are knitted according to the same principle as for men and women.

Knitted hat for a newborn

A simple cap for a newborn of any gender is knitted using satin stitch from acrylic or wool blend fine or medium yarn, approximately 100 g/150 m.

The cap is knitted on two needles as follows::

• cast on 42 loops;
• knit 2x2 rib for about 8 rows;
• switch to satin stitch and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of fabric in half and sew the upper edges together through the edge loops. Sew a lace or rope of yarn to the bottom edges.

Knitted hats for boys (with description)

For boys, you can knit hats with earflaps with ties, helmets or regular hats with stockings. A hat can be decorated not only volumetric patterns, but also with a jacquard pattern.

Knitted hat for girls

A simple hat for a girl is knitted in various patterns, both large and small knitting. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to knit a hat is with an elastic band and garter stitch.. To do this you will need fairly thick yarn (100 g/100 m) and 7 mm knitting needles.

Cast on 72 stitches on circular needles and form a ring. Knit 2x2 rib for about 15 rows. Next, switch to a pattern of alternating 2 front and 2 back rows. Knit up to row 29.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

Owl hat for spring for a girl, knitted: diagram with description

A beautiful “Owl” hat with an ornament and “ears” is knitted on 4 mm circular needles with 100 g/130 m yarn.

First, cast on 64 stitches and knit 4 rows in satin stitch. Next, knit 2 rows according to the pattern: 26 with the wrong side, 12 with the front side, 26 with the wrong side. Starting from the 7th row from the beginning, start knitting the pattern on 12 central loops (the remaining loops are knitted purl). Knit even (purl) rows according to the pattern.

In the first row, alternate knit 3 and yarn over in the middle. In the 3rd row, knit 3 loops, then yarn over, knit 9 with “rice”, yarn over, knit 3. Rows 5 and 7 are knitted like 3, but in the middle knit 11 and 13 stitches, respectively, with “rice”. In rows 9-15, knit 3, knit 13, knit 1.

Rows 17 and 19 – knit 3, decrease, 7 “rice” (in 19 – 5), decrease, knit 3.

In the 21st row, make a braid on 6 knitting needles, leaving the extra one for work. Knit the front and again the braid on 6 loops.

In rows 23, 25 and 27, 13 stitches are knitted in stockinette stitch, row 29 is knitted like 21.

31 (33) row – 3 (2) knit, 7 (9) purl, 3 (2) knit. Row 35 – knit 1, purl 11, knit 1.

From the 37th row, knit the next 9 rows with purl stitch, and then bind off the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select hypoallergenic yarn specifically designed for children. Typically, such yarn contains acrylic, merino wool or fiber. These materials do not cause irritation, clothes do not rub and lie softly on the body.

How to knit a beautiful, simple women's hat for beginners: a step-by-step guide

So, knitting any hat pattern can be divided into 5 main stages: elastic, increase, warp, decrease, close. Depending on the features of the models, some steps may be missing. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to an English or patent elastic band, then you don’t need to make any increases - the knitting will turn out fluffy.

You can also skip the first stage, that is, start knitting immediately from the main pattern. If you immediately knit with satin stitch, the edge will most likely curl into a small roll - you will get an original lapel.

The general knitting pattern includes the following steps:

1. Cast on the number of stitches on stocking or circular knitting needles according to the size of your head, based on the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Go to spokes bigger size(1-2 mm more) and make increases in the next row after the elastic band (5-40 increases).
4. Knit in the round with the main pattern.
5. At the top of the head, begin to close the knitting, evenly decreasing several loops in a row, alternating rows with decreases with regular rows according to the pattern.
6. Using a needle, pull the thread through the remaining 6-20 loops, pull and secure the thread at the top of the head.
7. Wash the finished product and dry it.
8. If desired, decorate the hat with a pompom (ready-made or homemade).

How to crochet a hat

A simple hat is crocheted from the crown using single crochet stitches with gradual addition of stitches. When the diameter of the head is reached, it is necessary to knit the hat to the end without any increases.

Knitting hats: models and patterns for free

In the educational video below you can see how to knit a hat.

Knitting patterns for women's, men's, and children's hats with descriptions are shown in detail in the following video clip. Look.

The models presented are a few of the masses possible options hats Each needlewoman can come up with her own original model, draw a diagram, or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.

Ushanka hats - funny fashion accessory, which will lift your spirits on a cold, cloudy day in winter or autumn. Designers offer a lot different models- choose! I offer a selection of knitting patterns for women's earflap hats.

Perky women's hat with earflaps with elastic on knitting needles

Hat and bag - all in one style

Items put together in sets look great. Look at the photo: a charming knitted hat with earflaps and a handbag. Is it really interesting? And knitting is very easy, even for beginners.

Required:
— Mammola yarn (50% wool 50% acrylic 30met/50g) — 250 g. for a hat, 350 gr. on the bag;
- knitting needles No. 7, No. 10, hook.
— handles 55 cm.
The diagrams show only knits.r., purl.r. knit according to the pattern.
Density: 10 sts = 10 cm (garter stitch with needles No. 7); 15 p. = 10 cm (braid pattern 1, knitting needles No. 7).

Knitting pattern for a hat with earflaps

1. Knit the handbag in one piece. Due to the difference in the density of the patterns, the parts knitted with garter stitch are more tightly knit, which gives the product shape. In the pattern this is indicated by a convex line. On sp. No. 7, cast on 36 sts and distribute as follows:
   15 p. garter stitch, 16 p. braid pattern 1, 5 p. garter stitch.
2. Knit 63 cm straight and bind off the stitches. Fold the knitting in half, sew the side and bottom edges. Sew on the handles.
3. Let's move on to knitting a hat with earflaps. On sp. No. 10, cast on 6 sts and knit according to pattern 2, adding 1 st in each row. at the beginning of the river After 12p you should have 14p. Knit the second earphone of the hat in the same way.
4. We connect the details. Before the first earphone we put 2 air loops, knit the earpiece, throw on 26p. for the frontal part, attach the second ear and connect it in a circle (=56p.). We distribute the loops as follows:
   — 2 knits., 14 p. according to scheme 2, 26p. rib 2x2 (k2, p2), 14p. according to scheme 2.
5. After 26 rubles. after starting knitting in the round in the pattern, knit an elastic band in each purl strip 6 times, 2 purl stitches together, in braids, make decreases according to the pattern (=42 stitches).
6. Next R. decrease the elastic in the front edges of the hat; in braids according to the pattern and in 2 knits. between the braid patterns at the back, also knit the knit stitch together (=28 stitches). In the frontal part it turned out to be a 1x1 elastic band.
7. In 2 rubles tie all the loops two at a time with a broach (slip 1 stitch as knit, 1 knit and pull it through the removed one).
8. The remaining 14p. tighten and secure.
9. Walk along the edge of the finished earflaps with crochet 1 next to the “crawfish step”.
10. For ties, cut 12 pieces of yarn 35cm long, divide into two parts. Take 6 pieces, fold them in half, tie them in the middle and braid them, making a knot at the bottom to prevent them from unraveling. Weave the second one. Tie to the hat. Make it 10cm in diameter and sew it to the hat.

Knitting pattern for earflaps

Women's earflaps with braids

The charm of white

For lovers of braids - a chic women's hat with earflaps on knitting needles, which will not only warm you up, but also add zest to your look.

Size 52-56 cm.
You will need:
— Drops Nepal yarn (65% wool 35% alpaca 75mt/50g);
- knitting needles No. 5.
Density: 17p = 10cm

Basic patterns:
- garter stitch (when knitting in the round, alternate knit 1, purl 2; in a straight line - knit all stitches);
- knit braids according to the pattern
How to make additions? Yarn over, and in the next p. knit it across the back wall, then there will be no hole.

Description of knitting

1. Dial 8p. 1р(IR): facial; 2p (LR): knit, adding 1 p., retreating 2 p. from the edge on both sides (see how to make increases). Repeat the additions through the row in knits.r. three more times (= 16 stitches), continuing to knit with plaid stitch.
2. Let's start knitting the pattern:
   LR: 2p. scarf.in., 2p., 1 knit., yo, 1st., yo., 4p., yo., 1k., yo. 1k., 2p., 2p.plat.in. (=20p).
   IR: 2p.plat.in., 2knit., 4p., 4knit., 4p., 2knit., 2p.plate.in.
   LR: 2p.plat.in., 2p., pattern according to the diagram, 4p., pattern according to the diagram., 2p., 2p.plate.in.
   At the same time, at a height of 4 cm, add 1 stitch. on both sides at a distance of 2p. from the edge. Knit an additional stitch. purl on the side and knit on the wrong side.
3. Repeat increases at a height of 6cm (=24p.). Finish knitting the ear from the inside out. Knit the second one in the same way.
4. We connect the details. Using circular knitting needles, cast on 2 stitches, then knit the loops of the first ear, cast on 22 chain stitches, then the second ear, another 2 chain stitches. (=74p.). Place a marker in the center of the back. Now the description of the earflap hat for women will start from the center of the back.
5. Then, above the cast-on loops (in the front and back), knit 4p. garter stitch, and continue to knit braids on the other loops.
6. We make additions:
   2p., yarn over, 1knit., yo, 1kt., 4p., pattern according to the pattern, 4p., pattern according to the pattern, 4p., 1knit., yo, 1knit., yo, * 4p., yo., 1knit. , yarn over, 1 person. * - repeat from * to * 3p, purl 4, k1, yo, k1, yo, purl 4, pattern in dc, purl 4, pattern in dc, purl 4, k1, yo, k1. , yarn over, 2 p. (=88p.)
7. Continue knitting according to the pattern. Over 4 p. knit purlwise, with braided patterns between them. 11 rapports in height.
8. When you knit 15cm along the line from the forehead, cut 1 stitch at a time. in all purl paths (= 77 stitches). At a height of 16 and 17cm, repeat the decreases (=55p.). After 1cm, tie the last purl stitch and the adjacent knit stitch together (=44 stitches).
9. Then - knit 2 stitches together. 2 times through a row (= 11 stitches). Pull and secure the remaining ones. Make a pompom with a diameter of 5cm.

Braid knitting pattern

Well, the knitted earflap hat for a woman is ready.

Model of a hat with earflaps for the winter

The site has already reviewed this cute version of the women's winter hat with earflaps. Let's not repeat ourselves. Follow the link under the photo to see the diagram and description.

Ushanka with imitation fur, fashionable this season

Winter is coming and it’s time to thoroughly prepare for it. Many women in winter prefer knitted hats earflaps. And if you know the knitting technique, it’s also fast. We saw a beautiful fashion model and immediately tied me up. Moreover, the choice of yarn is now huge. But the selection of good quality woolen hats leaves much to be desired. Too much synthetics. Let's treat ourselves to a new model of a women's winter hat with earflaps trimmed with fur yarn.

Warm double hat with imitation fur

Size 56-58 cm
You will need:
— Eskimo yarn (100% wool 50met/50g) — 100 g;
— Furlana fur yarn from Alize (45% wool 55% acrylic 40met/100g) — 150g;
- stocking needles No. 7, No. 9.
As you understand, we will knit the earflaps on double knitting needles, i.e. You will need to knit two hats, which we will then connect.

Description of knitting earflaps on knitting needles step by step:

Attention! The number before the line is for the top hat, after it is for the fur hat.

1. For the left earpiece, cast on 5/3 stitches, purl the row, adding 1 stitch on each side. This is the purl row. Then make such additions at 3 and 7/5 p. Next, increase only from the right edge in rows 9, 13 and 17/9 (= 14/8 stitches). Tie the second one symmetrically.
2. How to knit an earflap lapel? Dial 28/18 p. First p. - purl, we knit it with facial loops. Then continue with stockinette stitch, adding 1 st on each side. (=30/20). Next straight 16/10r.
3. We collect the details: Right eyelet, lapel, left and cast on 6/4 stitches (=64/40 stitches), knit with stockinette stitch 10 cm. Divide the knitting into 4 parts and hang markers. Knit 2 stitches in each row. together in front of the markers. When 8 stitches remain, pull them together with a working thread.
4. Assembling a women's hat: place the parts one inside the other, pin the edges together. Crochet with fur thread using the edge loops. Fix the lapel in two places.
5. Make two small pompoms and attach them with a chain of chain loops.

I really hope that the knitting pattern and description are clear to you and that you can easily knit a new earflap hat with your own hands.

Another version of knitted earflap hats from the Drops design studio collection. Warm women's hat and cape. A model that is suitable for both young girls and older women.

Hat and cape together - warm, cozy, stylish

Warm head and hands

We will knit and crochet this chic set.

And your head is warm, and your hands are not cold

There was already an article on the site about men's earflaps. If you want to please your significant other, follow the link under the photo.

Stylish winter model

5 models for men: read

For beginner knitters, I offer a detailed video master class on knitting a double women's earflap in garter stitch: