Another way to make a brim on a knitted hat. Video: Knitting a hat and scarf

Many hat lovers like to quote commander Suvorov: “Keep your feet warm and your head cold.” However, the modern fashion industry categorically rejects the warlord's observation, offering an amazing variety of models of these hats. Therefore, the question of how to knit a hat is always relevant for beginning knitters.

The hat is modern!

A knitted hat is a unique piece of clothing. Firstly, it is quite quickly and easily knitted on your own, and secondly, it never goes out of use. It is enough to remember fashionistas of the early twentieth century or rare fashion shows of the Soviet era, not to mention modern ready-to-wear weeks, to be convinced: fashion may change in shape and color, but the hat as such still remains in trend. This is also due to the fact that this comfortable attribute can be worn by everyone, from young to old. It doesn’t matter how old you are, whether you are a man, a woman, or even a child, the right model of hat will make you stand out from the crowd and protect you from the weather.

What hats should beginners knit?

Needlewomen who are just beginning to get acquainted with the nuances of knitting are wary of knitting hats. Like, the loops need to be carefully calculated, the patterns need to be selected, and the thread tension must be closely monitored, otherwise all the imperfections on such a small-sized canvas will quickly appear. And there is absolutely no need to worry! Hats are an ideal start to a knitting career because:

• a small canvas allows you to quickly see the result of your efforts;
• knitting requires minimal calculations;
• The designs for such headdresses are not complicated.

To begin with, it is better to take on hats with a seam at the back, and choose a 2x2 elastic band as a pattern. That’s all the wisdom for beginners, the “secret” of how to knit a simple hat with knitting needles.

Materials:

• 1 skein of acrylic thread;
• knitting needles No. 6;
• yarn needle or crochet hook.

Instructions:

1. We cast on 70 loops.
2. We knit 2 knit stitches, then 2 purl stitches to the end of the row.
3. We knit the purl row according to the pattern.
4. Having passed 25 cm of the pattern, we begin decreasing, knitting 2 knits and 2 purls together until the end of the row.
5. Purl row - according to the drawing.
6. We knit 2 knits together and 1 purl, odd row according to the pattern.
7. We knit all the stitches with knit stitches and combine them in pairs.
8. In the purl row we knit purl loops.
9. We cut the thread from the skein and put the remaining loops on it, tighten it - this is the top of the thing.
10. Using a crochet hook or yarn needle, sew the sides together. The hat is ready.

Winter model with an unusual pattern

All step by step instructions for beginners, describing how to knit a hat with knitting needles, have one thing in common - very simple drawings. But in this model, due to the displacement, the pattern turns out to be quite unusual.

Materials:

• 300 g bulky yarn;
• circular needles No. 4.

Instructions:

1. Cast on 49 stitches and knit 1 row.
2. Next we move on to rapport: knit 4, purl 2. We do not change the order 18 cm.
3. We knit the front row, marking every 8 loops with thread, and then after 9 and 6.
4. Let's start decreasing: after each mark we knit 2 loops together, making the odd row according to the pattern.
5. When there are 19 loops left, we make a row of double ones, and then pull everything into one.
6. We wind a thread onto a piece of cardboard, intercept it in the middle, and cut the edges.
7. Attach the resulting pompom to the top of the head. The hat is ready.

Over the last couple of years, models of hats that look like a cap have been very popular. To create them, it is not necessary to have extensive knitting experience. After all, even a simple pearl pattern will look very original. Just watch the thread tension: any tugging will distort the pattern.

Materials:

• 100 g wool yarn;
• circular knitting needles No. 4.5.

Instructions:

1. Cast on 80 stitches.
2. We knit a row of alternating 1 knit and 1 purl.
3. We knit the next row according to the pattern.
4. Next, we knit a knit stitch over the purl stitch, and a purl stitch over the knit stitch.
5. Again, a row according to the drawing.
6. We knit 21 cm, repeating steps 2-5.
7. We start decreasing by going to garter stitch(we form all rows with facial loops). We knit every 5th loop together with the previous one.
8. After 4 rows we repeat the decrease.
9. Now we make decreases in every 4 rows until 8-9 stitches remain.
10. Cut the thread and tighten the remaining loops with it. The hat is ready.

If your man is skeptical about hats, this means only one thing: among them there is no one that would be knitted with his favorite hands. It's time to correct the situation - we knit a men's hat with knitting needles! For beginners, it is useful to focus not on the pattern, but on the color combination of the yarn.

Materials:

• 150 g black acrylic yarn;
• 150 g gray acrylic yarn;
• circular knitting needles No. 3.5.

Instructions:

1. We cast on 96 loops and knit 7 cm with a 2x2 elastic band.
2. We knit 2 rows in stockinette stitch with black and gray threads. In the front rows there are facial loops, in the purl rows there are purl stitches.
3. After 12 cm, divide the loops into 4 and mark with threads.
4. Before the mark we join 2 stitches.
5. After 8 loops remain on the knitting needles, drop them onto a thread and tighten the crown. The thing is ready.

Yarn VITA Alpaca wool, 40% alpaca, 60% wool (laster); 100 g / 300 m. Consumption: 50 g of dark green yarn and 30 g of light gray yarn.
Knitting needles No. 2.5, knitting needle.
Knitting density of the Honeycomb pattern Pg. = 2 loops in 1 cm, Pv = 4.6 rows in 1 cm.
Cap size 56 - 57

We will knit a classic hat “over the head” with knitting needles, starting from the bottom, with a seam at the back. This method of knitting hats is perhaps one of the most common. detailed instructions Designed primarily for beginner knitters. The hat is knitted from yarn of two contrasting colors in a “Honeycomb” pattern and trimmed with a roll of stockinette stitch. Both thin and thick yarn are suitable for knitting this hat model.

Let's start with the basics. Having understood the principles of calculating and decreasing loops, you will be able to knit children's, men's or women's hat any pattern you like for any size. So, first, a little theory.

Measurements for knitting a hat

Let's see, what measurements are taken to create the basis of a hat pattern?.

• The circumference of the head is measured at its widest point. Ours is 56 cm.
• The distance from the point of the base of the skull to the top of the head (AM) is 17 cm;
• Distance from the crown to the front hairline (MB) = 16 cm;
• Distance from the top of the head to the earlobe (MU) = 21 cm.
• Distance from the base of the skull to the earlobe (AU) = 11 cm.

Now let's build a base pattern. We build a right angle with the vertex at point O. Horizontally we put off the head girth measurement - point G. Down vertically we put off the measure AM = 17 and get the line of the back seam. We divide the OG distance in half and get point Bo - the line of the middle of the front. Along this line we lay down the measure MB = 16. From point O to the right horizontally we put down the measure AU = 11 and we get point Uo, from which we draw a vertical line (ear line) downwards. Distance УоУ = MU = 21 cm. We draw a smooth line through the points АУВ.

Hat base pattern

If you knit this pattern, you will get a hat with a back seam, small ears and a gather at the top. The size of the hat will correspond exactly to the measurements of your head if you knit it with a tight, low-stretch knit.

But we will knit the simplest hat - a cap. This cap consists of a crown and a bottom and is a cylinder.

Let's decide on the sizes of the bottom and crown. Let's assume that the cap should cover the ears, that is, reach the earlobes. This means that its height as a whole should correspond to the measurement MU = 21 cm. The width of the hat at the level of the crown should correspond to the circumference of the head - 56 cm. Now let’s calculate the radius of the circle - the bottom (R). The circumference of the bottom is 56 cm or 2PR, where P is the number pi equal to 3.14. Then R = 56 / 2x3.14 = 8.9 cm. Let’s round this value to 9 cm. Now we can determine the height of the crown: 21 - 9 = 12 cm.

So, to knit a simple hat, it is enough to take only two measurements - the circumference of the head and the desired height of the hat.

The general formula for calculating the radius of the bottom of the cap is R = Og /6.28.

If for some reason you cannot take measurements, we offer an approximate table of the ratio of the sizes of a knitted hat in accordance with the person’s age.

We will knit the cap from the bottom, from the crown, and decrease the loops to form the bottom.

Scheme of the "Honeycomb" pattern

The pattern is repeated from row 2.

The dimensions of our sample turned out to be:

before washing

• 42 loops - 18 cm
• 70 rows - 14.5 cm

after washing, slightly stretched

• 42 loops - 21 cm. Pg = 42 / 21 = 2
• 70 rows - 15 cm PV 70 / 15 = 4.6

Knitting pattern "Honeycomb"

So, we cast on 114 stitches on the knitting needles, knit a 3 cm stockinette stitch and move on to the main stitch, which we knit 12 cm or 12 x 4.6 = 55.2 rows. We round this value for convenience in accordance with the repeat, which is equal to 8 rows and we get 56 rows or 7 repeats. Next we will decrease the loops to form the bottom.

The choice of method for decreasing loops depends, first of all, on the pattern. In our case, it is convenient to decrease the loops in the 2nd row of rapport, knitting 3 loops together with the purl, then yarn over, remove the loop and then according to the pattern, and in the 6th row: yarn over, slip one loop, 3 loops together with the purl and then according to the pattern . In total, the bottom is 9 x 4.6 = 41 rows or 5 repeats. This means decreases are possible in 10 rows. In total, to form the bottom you need to subtract 102 loops: we will collect the remaining 12 loops (including edge loops) onto a thread. Divide 102 by 10 and we get that in 9 rows out of 10 you need to decrease 10 loops, and in one - 12. Considering that by knitting 3 loops together we decrease 2 loops at once, we get that in the row you need to do 5 decreases, distributing them evenly. In one of the rows (more convenient in the 26th row) you need to make 6 decreases. We distribute the decreases evenly in the row, but preferably not on top of each other, but with some offset so that the places of decreases are less visible. For some patterns, on the contrary, the paths at the place where the loops are decreased create a decorative effect and then the decreases are made on top of each other.

The cap has a seam at the back, so you need to carefully knit the side edges of the fabric so that they can then be joined as least noticeably. Since the pattern is two-color, let's see how best to introduce a new thread and then change threads as you knit.

Attaching a thread of a different color

At the end of the row we knit the edge loop with both threads together. The “tail” of the thread of the new color is then sewn into the edge. We always knit the last stitch of the row , turn the work over, remove the edge loop from the left knitting needle to the right one.

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans. Cute hats will help complete the look with patterns, pompoms or “ears”.

Clothing stores offer many models of hats - men's, women's, children's. However, it is worth spending time and money to find an accessory that matches your overall look. Needlewomen can save money and at the same time knit suitable stylish hats for the whole family. The main thing is to understand all the intricacies of the scheme and understand general principle work. How to knit a hat with knitting needles. You will find knitting patterns for women's, men's, and children's hats with descriptions in this article.

We knit a hat for women and men

Before knitting, you need to choose the right yarn and knitting needles. Yarn depends on the season and model. Winter hats are knitted from yarn with a high wool content, spring hats are knitted with acrylic. Bulky yarn is suitable for models with large patterns and coarse knitting. Thinner yarns are well suited for tight knitting with small patterns.

Hats are usually knitted on circular needles - this way the product will be smooth, no seams. The elastic band is knitted on thin needles for density. When moving on to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers to mark the beginning of the row and the loops needed when working, as well as a needle, hook and an additional curved knitting needle for braided patterns.

Before you choose and start knitting suitable model, it is necessary to understand several general rules, which will be needed when knitting any hat.

How to add stitches on a hat using knitting needles

Usually the increase is made in the next row after the elastic band, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows depending on the model.

You can add loops in the middle of a row in different ways. The most convenient methods of increasing are from the previous row and using a yarn over.

You can make a loop from the previous row from a broach, that is, a thread between two loops, or from a loop from the previous row. Broach pounces on left knitting needle and knit the front one - an additional loop is obtained.

How to knit a hat with knitting needles. Knitting patterns for women's, men's, and children's hats with descriptions are not difficult to find. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation.

If you pick up, pull out and knit a loop from the previous row with your left knitting needle, you will also get a new loop. This will happen most unnoticeably - it will be difficult to find places for increase in the overall mating.

Using a yarn over, a loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop for back wall purl. Otherwise, the addition will stand out as a small hole between the threads.

Hat in stockinette stitch (garter stitch) with knitting needles

Beginners knit simple hats using stockinette stitch or garter stitch. This is the most simple ways work.

Knit stitch involves alternating rows of knit and purl stitches. The canvas will have a smooth vertical pattern on one side (front side), and a pattern in the form of transverse waves on the reverse side (wrong side).

Garter stitch is done exclusively with knit stitches, regardless of the side. The result is a simple relief pattern.

Note! The stockinette surface tends to curl up at the edges. To prevent this from happening, first knit an elastic band. You can also “secure” the edges by crocheting them.

How to finish a hat with knitting needles

After the hat is knitted to the desired length, you need to start narrowing the crown. To do this, you need to decrease a few loops in the following rows.
Decrease - knitting two loops together. As a rule, when knitting a hat, rows with decreases alternate with rows knitted according to the pattern. This reduces the number of loops through which decreases are made.

For example, first every 10 loops, then every 9, then every 8 and 7 loops. When there are no more than 20 loops left, pull the thread through them and pull off. This completes the knitting of the hat.

Knitting patterns for hats: diagrams and descriptions

There are a lot of knitting patterns. A variety of braids, braids, diamonds, “bumps,” and “leaves” look good on hats. Also, the main fabric of the hat can be knitted not only with satin stitch, but also with a certain pattern, for example, “rice” or “honeycomb”.

“Rice” is a simple pattern that makes the product airy and embossed. “Rice” is used to knit not only hats, but also snoods. The pattern is well suited for both bulky and thin yarns.

The knitting principle is very simple: the front stitch alternates with the purl stitch. In the next row, the knitting changes: knit is knitted purl, purl is knitted.

“Honeycombs” are knitted with a thread thrown over. To do this, you need to cast on an even number of loops. Knit a knit stitch in the 1st row, then put the thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created like this: purl, throw the yarn over onto the right knitting needle, knit 2 loops, transfer, knit 2, etc. Row 3: yarn over, remove the loop, knit together with the yarn over, repeat the rapport to the end. 4th row: knit 2, yarn over, repeat again until the edge. Row 5: knit a yarn over and a loop, slip a double crochet, repeat. 6 knit like 2. From the 7th row, the repetition of rapport begins - rows 3-6.

“Braid” is the most common pattern for hats and the simplest, especially for beginners. For this you need to prepare an additional short knitting needle.

As an example, cast on 14 stitches in the usual way and knit rapport:

• remove the edge;
• purl 2 stitches;
• knit 8;
• knit the remaining loops purl;
• repeat steps 1-4 3-4 times (the length of the braid depends on the quantity);
• repeat step 1-2;
• throw 4 loops onto a short knitting needle and leave before knitting;
• knit 4 knit stitches of the row;
• return the loops from the knitting needle to the left one and knit them with knit stitches (if convenient, you can knit them immediately with an additional one);
• finish the row by knitting the purl loops;
• repeat rapport (points 1-9).

Note! The number of loops must be even so that the loops can be equally divided into two parts.

Braids can be knitted different lengths and width, as well as tightly to each other or through purl loops, depending on the model and yarn. More dense and thin braids Knit every 3-6 rows on 4-8 loops. Wide braids are best knitted every 10-15 rows on 10-14 loops.

There are many other warp knit patterns. When choosing a pattern, you need to pay attention to its density: the denser the pattern, the better the heat will be retained, which is important for winter hats. Summer and spring hats allow mesh or openwork patterns(“ladder”, “shells”, “peacock tail”, “leaves”, etc.).

How to knit a winter hat for women (with description)

Winter hats are denser, softer and more voluminous than spring hats. To knit them, you need yarn containing at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Takori hat made of mohair knitted (knitting pattern)

A takori-style hat can be considered a universal model, since it can be worn in different variations: as a stocking cap, with one or several cuffs. Takori is a very soft and voluminous hat. This pattern is knitted quite simply with English rib and will appeal to beginning knitters.

To create a takori hat you will need Angora yarn (100 g/500 m), 4.5 mm circular knitting needles (can be knitted on two knitting needles), markers, and a large knitting needle.

The thread is folded in half(the beginning and end of the ball are connected) and 70 loops are cast on (head circumference 56-58 cm).

Knit rapport: yarn over, remove loop, knit, repeat. All even rows - yarn over and the loop behind it, purl, yarn over, remove the loop, etc.

Alternating rows, knit to the desired length (approximately 32 cm), and then change to a 1x1 elastic band: knit a loop with a purl crochet, 1 knit and then in the circle. Subsequent rows (about 3 cm) are knitted according to the pattern.

Work through a decrease row, knitting every 2 stitches together.

Cut the thread about 10 cm from the needle and thread it through the needle. Pull the loops and secure the thread.

Knitted hat with a lapel

A classic hat with a lapel is knitted with an elastic band 1x1 or 2x2 (knit and purl). After knitting 5-7 cm with an elastic band, you need to change the knitting in a checkerboard pattern: knit the front loops with purls, and the purls with the front ones. In this way, a line of inflection of the lapel will be outlined, along which the edge can be folded. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! An elastic band made from soft yarn stretches well, so it is important to make it the size of your head or a little narrower.

When the elastic is completed, you can move on to the main part of the hat and knit it with the desired pattern.

Double knitted hat

This warm hat in two layers. There are quite a lot of options. The easiest way is to knit in satin stitch on stockinette and circular needles, starting from the crown. In essence, you should end up with a stocking closed on both sides.

Roll the thread into a ring and, inserting the knitting needles through it, cast on 12 loops, 3 loops on each knitting needle. You can also type it in the usual way, but then you will get a small hole in the middle. Knit a row with knit stitches.

Increase 8 stitches per row 12 times: 1st row - knit, increase, knit, increase, knit (so on each knitting needle). Subsequent even rows are knit rows. Row 3 – knit, increase, knit 3, increase, knit, etc. (inc on each needle after the first and before the last stitch). The result should be 4 wedges.

Once 24 rows are knitted, change the knitting needles to circular ones and start knitting in satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Decrease (guide by markers) 12 times: row 1 - knit, slip, knit, throw the previously removed loop over it, knit to 3 outer loops (to the marker), 2 together, knit, etc. There are 24 rows in total.

Tighten the last 12 loops with working thread.

Knitted thick yarn hat

Simple hats with a simple pattern are knitted from thick yarn quite quickly. Thick yarn is considered to be skeins weighing 100 g and no more than 140 m long. Accordingly, you will need large knitting needles from 8-10 mm, depending on the thickness of the thread.

Typically, 30-40 loops of thick yarn are cast on knitting needles and knitted in the round using garter stitch, ribbed stitch or satin stitch. There is no need to make any additions; the classic subtractions are made.

Knit a hat for spring with knitting needles for a woman - new models

In spring, you can get creative and knit not only warm ones, but also beautiful models hats

Knitted turban hat

A simple turban is knitted with English elastic 1x1 in a single piece of approximately 12x90 cm (you should get a narrow scarf). Having knitted the scarf to the desired length, close the loops in the usual way. Then the finished fabric is collected into a turban and stitched.

Try the scarf on your head, wrapping it like a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand which sections need to be sewn, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and on the sides on the wrong side.

Important to remember! To correctly calculate the size of the hat, you need to knit a sample of 10 loops for 10 rows, wash, dry and measure.

Women's hat knitted with description and diagrams

Knitting a beret from a hat is distinguished by mandatory increases in 1-2 rows after the elastic band. This will help expand the knitting to the desired diameter.

The elastic band of the beret should fit snugly on your head.. As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows from the elastic, uniform decreases are made.

Hat with English rib (2x2) knitted

This is a fairly simple model, similar in design to a takori hat.

You will need a relatively thin thread containing acrylic, for example, Alize Lanagold yarn (100 g/240 m), as well as 3.5 mm circular knitting needles and a needle.

How to knit:

1. Cast on a multiple of 4 stitches on the knitting needles.
2. Knit according to the principle of a classic English rib, but knit 2 loops each: 2 knit stitches, 2 slipped double crochet stitches, next row - according to pattern, etc.
3. Having knitted to the desired length, switch to 1x1 elastic: knit knit, 2 together with knit yarn over, purl and then in the round.
4. Knit the next rows according to the pattern(5-6 cm).
5. Make decreases as when knitting a takori hat.
6. Thread the cut thread through the needle and pull it through all the loops.

Knitted hat with braids (diagram)

There are many options for this model. In a simple, classic hat, braids of 4-6 loops are separated by 2-4 purl loops.

Cast on a multiple of 2 stitches on the knitting needles and start knitting 2 knits, 2 purls (2x2 rib) in the round. After 5-7 cm of knitting, change the knitting needles to thicker ones, switch to satin stitch and add loops every 3 loops.

To knit repeat for braids: knit 6 knit stitches, 3 purl stitches, 6 knit stitches, etc. After knitting 4 rows, knit the braid on the front loops, and then repeat the rapport from the beginning.

Having knitted to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decreases. Pull the last loops together.

If you alternate through an equal number of rows of braids with a knitting needle behind and before knitting, you will get a “braid”. For example, one row - 120 loops, one braid consists of 12 loops, respectively, around the hat there will be 10 wide braids.

10 rows are knitted in satin stitch, then a row with braids is made: remove 6 loops on the third knitting needle and put away for work, knit 6 loops of the row, and then loops from a short knitting needle. This is how the whole row is knitted. After the next 10 rows of satin stitch, the order changes: 6 loops on the auxiliary needle remain before work, and so on.

It is important to know! Braids slightly compress the diameter of the hat, so you need to add a large number of loops in 1-2 rows (there can be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a row “obliquely”, you need to try on the future hat: the pattern should not compress the head.

Knitting pattern for a Kubanka hat for women (with description)

The Kubanka hat is a rather original model, distinguished by its rectangular shape.. The complexity of this model is that when moving from the crown to the bottom of the cap, it is necessary to tie a roller.

For size 57, cast on 4 mm needles for 130 stitches. Knit approximately 4-5 rows with a 1x1 elastic band, and then, without adding loops, proceed to knitting the main part of the hat up to the crown (you can make a suitable pattern).

Make a roll by knitting 8 rows with a 1x1 elastic band. It is necessary to connect the 1st and 8th row: pick up the loops from the first row of the elastic band and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue knitting in satin stitch, decreasing 7 stitches in each front row (knitting without decreasing on the purl side). The result should be 7 wedges. Tighten the last loops with thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. However each model has its own characteristics, which can cause difficulties when knitting.

Knitted hat with ears

A cute simple hat with ears is knitted in garter stitch in the round or like a takori: English or classic elastic, but is not closed with decreases. Having knitted the hat above the crown, you need to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the “pipe”. To do this, you need to sew the top of the hat, starting from the center, from the wrong side (connect the wrong loops together). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the hat.

Beanie hat (stocking) knitted: knitting pattern

This is a simple pattern that even beginner needlewomen can handle knitting. Usually the “stocking” is knitted in garter stitch without patterns. This model differs from all others in its rounded top and quite long length(the top of the hat should fall off the head).

To knit this model you will need thick yarn, for example, “Nako Jersey” (100 g/74 m) or Trinity yarn “Melody” (100 g/100 m), 6-7 mm knitting needles, and a needle.

The stocking cap is knitted in vertical and short rows. To do this, you need to cast on 45 loops on one knitting needle (along the length of the hat) and knit 40 loops. The remaining 5 loops are not knitted and remain on the right needle.

Unfold the work and knit in the opposite direction in garter stitch. In the 3rd row, knit 41 loops, leaving 4. In the 5th row, 42 loops are knitted, in the 7th - 43 loops, in the 9th - 44, in the 11th - 45. From the 13th to the 22nd row, knit stitches are knitted. The 23rd row is knitted as 1 and further (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the beanie should be slightly narrower than the lower part due to the wedges.

Repeat knitting until the desired width is achieved (5-7 wedges). After the last row, the working thread should be at the top (if this is not the case, knit another row). Close the loops with purls, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the hat lengthwise (bottom to top). At the top, thread the needle through the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on loops to size.
2. Knit in an elastic pattern of 2 knits and 3 purls.
3. Having knitted to the crown, make decreases in the circle on the purl loops: 1 purl, 2 together, etc. (you will get a regular 2x2 elastic band, knit according to this pattern for about 7 cm).
4. Make decreases on purl stitches (1st row).
5. Knit a row according to the pattern (2 knits, 1 purl).
6. Pull the yarn through the last stitches and pull off.

Gradient knitted hat

Gradient hats look unusual due to the smooth transition from one color to another. The secret of this knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times depending on the thickness. Having knitted the bottom of the hat, begin to gradually replace the threads with a different color: first change 1 thread, then 2, 3 and so on until all the threads “change” color.

You need to mentally calculate when to change the color. For example, if the working thread consists of 3 threads, then you need to mentally divide the hat into 4 parts: part is knitted in one color, part with 1 thread of a different color, part with 2 threads, part with a different color.

Knitted hat with pompom

The pompom beautifully complements the hat and can hide minor imperfections on the top of the head. The simplest pompom can be made using cardboard “donuts” or a special circle.

Cut out 2 circles from cardboard with round holes in the middle - “donuts”. Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the central hole is tightly wrapped with thread, you can use a needle.

The tightly wound threads are cut in a circle (the cut is made along the edge) to the cardboard. Move the cardboard rings slightly apart so that you can conveniently pull and tie a skein of thread in the middle. After this, the rings are removed or cut, and the pompom is formed into a ball. Protruding threads and irregularities can be trimmed with scissors.

Knitted men's hat (diagram with description)

There are models of hats suitable more for men than for women, for example, a hat with earflaps or a hat-helmet.

Ushanka hat knitted

Hats with earflaps, depending on the thickness of the yarn and lining, can be either winter or demi-season. The main difficulty in performing this model is tying the “ears”. This is where knitting begins, so that the hat turns out smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army cap of the White Army. Initially, it was exclusively a men's headdress.

A simple one-sided hat with “ears” is knitted in garter stitch (can be knitted in satin stitch). To work, you will need yarn of medium thickness (for example, 100 g/120 m), circular and regular knitting needles 4-6 mm, and a needle.

First, cast on 12 loops on the knitting needles and knit 8 rows, adding 1 loop at the beginning of each row in the usual way. Knit 14 rows without increases. Cast on 8 stitches at the beginning of the row and knit 20 rows. Knit the second “eye” in the same way.

Cast on 22 loops and knit the visor 4 rows, adding 2 loops at the beginning (there should be 30 loops on the knitting needle). Next, knit 24 rows without increases.

Connect the knitted parts using circular knitting needles, knitting the loops of one “ear”, then the loops of the visor and the loops of the second “ear”, close the knitting into a ring. Knit in the round for approximately 36 rows.

Decrease evenly across rows of 7 stitches. When 20 loops remain, decrease in each loop (10 loops remain). Pull the thread through and tighten.

Knitted helmet hat

This pattern is quite difficult to knit, as it ties the head from the crown to the shoulders.

Usually, the helmet is knitted from top to bottom. First, stitches are cast on 4 double needles (8-12 stitches) and rows are knitted in the round with increases at the beginning and end of each needle. When the circle is large enough in diameter (around the head), you can switch to circular knitting needles and knit further in the circle without increasing to the forehead line.

Transfer the loops across the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, cast on additional loops, close the circle and knit the neck. For the shirt front, cast on additional raglan stitches at the top and knit to the required width.

Tie the front part with an elastic band and close the loops.

Knitted sock hat

The men's sock hat is knitted like a women's beanie hat., that is, you can start from the side and knit in short rows.

There is another option: knit in the round with a thick 1x1 rib, and then divide the stitches in the row into 3-5 wedges, place markers and start decreasing through the row, focusing on the markers. Tighten the remaining loops with thread.

Hat made of thick yarn with knitting needles (knitting pattern)

From thick yarn for men you can knit similar to female models. The only thing difference - drawing and pattern. For men, a more strict, geometrically correct pattern will suit a coat or jacket.

Majority men's hats large knit knitted with elastic bands, garter stitch, satin stitch, vertical braids.

It is important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool clothing should not be twisted and can only be dried in a horizontal position. This will help avoid deformation of the product.

Children's hat knitted

Baby hats often resemble bonnets, meaning they cover the entire back of the head and are tied under the chin. This is the main feature of such models. Otherwise, hats for children are knitted according to the same principle as for men and women.

Knitted hat for a newborn

A simple cap for a newborn of any gender is knitted using satin stitch from acrylic or wool blend fine or medium yarn, approximately 100 g/150 m.

The cap is knitted on two needles as follows::

• cast on 42 loops;
• knit 2x2 rib for about 8 rows;
• switch to satin stitch and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of fabric in half and sew the upper edges together through the edge loops. Sew a lace or rope of yarn to the bottom edges.

Knitted hats for boys (with description)

For boys, you can knit hats with earflaps with ties, helmets or regular hats with stockings. A hat can be decorated not only volumetric patterns, but also with a jacquard pattern.

Knitted hat for girls

A simple hat for a girl is knitted in various patterns, both large and small knitting. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to knit a hat is with an elastic band and garter stitch.. To do this you will need fairly thick yarn (100 g/100 m) and 7 mm knitting needles.

Cast on 72 stitches on circular needles and form a ring. Knit 2x2 rib for about 15 rows. Next, switch to a pattern of alternating 2 front and 2 back rows. Knit up to row 29.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

Owl hat for spring for a girl, knitted: diagram with description

A beautiful “Owl” hat with an ornament and “ears” is knitted on 4 mm circular needles with 100 g/130 m yarn.

First, cast on 64 stitches and knit 4 rows in satin stitch. Next, knit 2 rows according to the pattern: 26 with the wrong side, 12 with the front side, 26 with the wrong side. Starting from the 7th row from the beginning, start knitting the pattern on 12 central loops (the remaining loops are knitted purl). Knit even (purl) rows according to the pattern.

In the first row, alternate knit 3 and yarn over in the middle. In the 3rd row, knit 3 loops, then yarn over, knit 9 with “rice”, yarn over, knit 3. Rows 5 and 7 are knitted like 3, but in the middle knit 11 and 13 stitches, respectively, with “rice”. In rows 9-15, knit 3, knit 13, knit 1.

Rows 17 and 19 – knit 3, decrease, 7 “rice” (in 19 – 5), decrease, knit 3.

In the 21st row, make a braid on 6 knitting needles, leaving the extra one for work. Knit the front and again the braid on 6 loops.

In rows 23, 25 and 27, 13 stitches are knitted in stockinette stitch, row 29 is knitted like 21.

31 (33) row – 3 (2) knit, 7 (9) purl, 3 (2) knit. Row 35 – knit 1, purl 11, knit 1.

From the 37th row, knit the next 9 rows with purl stitch, and then bind off the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select hypoallergenic yarn specifically designed for children. Typically, such yarn contains acrylic, merino wool or fiber. These materials do not cause irritation, clothes do not rub and lie softly on the body.

How to knit a beautiful, simple women's hat for beginners: a step-by-step guide

So, knitting any hat pattern can be divided into 5 main stages: elastic, increase, warp, decrease, close. Depending on the features of the models, some steps may be missing. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to an English or patent elastic band, then you don’t need to make any increases - the knitting will turn out fluffy.

You can also skip the first stage, that is, start knitting immediately from the main pattern. If you immediately knit with satin stitch, the edge will most likely curl into a small roll - you will get an original lapel.

The general knitting pattern includes the following steps:

1. Cast on the number of stitches on stocking or circular knitting needles according to the size of your head, based on the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Go to spokes bigger size(1-2 mm more) and make increases in the next row after the elastic band (5-40 increases).
4. Knit in the round with the main pattern.
5. At the top of the head, begin to close the knitting, evenly decreasing several loops in a row, alternating rows with decreases with regular rows according to the pattern.
6. Using a needle, pull the thread through the remaining 6-20 loops, pull and secure the thread at the top of the head.
7. Wash ready product and dry.
8. If desired, decorate the hat with a pompom (ready-made or homemade).

How to crochet a hat

A simple hat is crocheted from the crown using single crochet stitches with gradual addition of stitches. When the diameter of the head is reached, it is necessary to knit the hat to the end without any increases.

Knitting hats: models and patterns for free

In the educational video below you can see how to knit a hat.

Knitting patterns for women's, men's, and children's hats with descriptions are shown in detail in the following video clip. Look.

The models presented are a few of the masses possible options hats Each needlewoman can come up with her own original model, draw a diagram, or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.

Knitted hats for women: patterns, descriptions, modern models

Three reasons why you need to learn how to knit hats:

First: Today it is difficult to find a knitted hat made from natural yarn in stores. IN best case scenario it will be a wool mixture with 50% acrylic, but, alas, you will not find 100% alpaca or merino wool with an admixture of silk. But in stores you can easily buy wool with the desired composition and knit a hat for yourself without synthetics.

Second: it's all about the style. To find a hat model that suits you, you need to visit all the stores in the city, is this familiar to you? Isn’t it easier to buy yarn and knit a hat with your own hands according to the description from the website? The Hummingbird website presents a lot modern models knitted hats with descriptions in Russian.

Third: knitted hat knitting needles is perfect gift to a person dear to you. To mom or grandma, brother or sister, dad or dear husband: knitted hat knitting with your own hands will give them a piece of the warmth of your hands, and at the right time will help to express concern for loved ones.

I wish you easy stitches and successful knitting with the Kolibri website!

Wicker hat with beautiful pattern has a classic shape, so it can be considered a universal model that will suit outerwear with different stylistic designs. The knitting density of this wardrobe item is moderate. The hat can be worn both in winter and in the mid-season period. This knitted hat is perfect for any outerwear! If successful...

,

An original hat and a small snood that fits tightly to the neck create a harmonious composition. With its help, you can introduce new solutions to casual look, decorating a warm outfit in the demi-season and winter. The presented wardrobe elements have no practical or stylistic restrictions in terms of options for use. Light grey colour knitted headwear will suit…

,

A hat and a voluminous snood will go well with coats or jackets made of various materials that have a narrow spanking. The presented wardrobe elements will come in handy in autumn or winter. Sudden drops in temperature and gusts of cold wind will not take you by surprise if you wear these warm warming clothes. This stylistic version of the snood and hat...

The pattern in the form of wide braids gives the hat an extra decorative look. The enlarged rear part of the presented model has modern style, which is very popular now. Moreover, in this part of this element You can hide locks of hair in your wardrobe. This feature makes the hat beautiful and multifunctional at the same time. A voluminous snood or…

,

A voluminous knitted snood goes perfectly with a hat with a pompom, giving its owner a youthful look. A hat with knitting needles with a pearl pattern and a snood with an English elastic band provide excellent warmth and can become indispensable when the temperature outside drops below comfortable values. The striped snood harmoniously complements the black hat with a white pompom. With such accessories you can create...

Comfortable and warm knitted hat. The pattern is simple, so you can easily use two colors of yarn. White - for the base and any other color for finishing. The voluminous decorations running around the circle of this model and the jagged design of the lower edge look original. Which yarn to choose depends on what weather it is intended for...

I bring to your attention another model of an interesting and simple hat with knitting needles in a variation of the “honeycomb” pattern. Unlike the classic “honeycomb” pattern, there are beautiful braids, but thanks to the clear division into sections, they still resemble a honeycomb. The hat model is not at all complicated, with a simple finishing of facial loops, so even a novice craftswoman can handle it. How …

Winter in the coming year was held back for a very long time, and therefore many girls and women could flaunt in autumn-spring coats, demi-season boots, without even thinking about putting on a hat or wrapping themselves in a scarf. But then the Epiphany frosts struck, and it became sharply cold outside. Now leaving the house without a warm hat is akin to suicide.

But how difficult it is sometimes to find something original! In addition, other girls, girls, women also rushed into the stores, sweeping away all the cute hats in a moment. As a result, the task of finding something attractive became almost impossible. And outside the window the frost is getting stronger! What should I do?

It's actually quite simple. You just need to take one evening and knit yourself an excellent hat! How? For beginners, this article will describe detailed instructions.

Stage one - preparatory

In order to knit a hat, you need to buy threads and knitting needles. But first you need to decide what color the product will be. Based on the fact that the Earthy Yellow Dog reigns in 2018, this season designers offer us the following trendy tones:

• yellow;
• green;
• all shades of brown;
• muted shades of red and burgundy;
• white;
• black.

However, when choosing a hat color, you should definitely take into account your own color type. Although, basically, a woman always knows which tones complement her face most advantageously. Therefore, the main question will be “how to knit a hat for beginners,” and not “what color to choose.”

How to choose suitable knitting needles

When choosing tools, that is, knitting needles, you must be guided by the following rule: the thickness of the knitting needle should be twice as large as the thread. But since it’s winter outside and the hat should protect your head from hypothermia, you can use thinner knitting needles.

1. After all, a hat can be knitted with fabric with one seam at the back. In this case, you will need two knitting needles with tips or so-called circular knitting needles connected by an elastic tube.
2. Or make a seamless product. Socks are knitted using this principle. To do this, you will need stocking needles; they are usually presented in a set of five pieces. However, this option will be more difficult for beginners. After all, due to lack of experience, the canvas can slip and loops can get lost. As a result, mating will only bring disappointment and regret about wasted time.

Tools required for work

Before you start studying the instructions on how to knit a hat for beginners, you should figure out what tools you will need. So, to complete the product you need:

• circular knitting needles or knitting needles with tips;
• Knitting thread;
• scissors;
• needle.

You should also think about the design of the future hat in advance. Complex plaits and braids look the most beautiful. However, such patterns will be difficult to perform for beginners. Therefore, in this article we will look at how to knit a hat for beginners, using one of simple patterns.

1. You need to measure the diameter of your head above the ears.
2. Then knit a fabric measuring 10 loops per 10 rows.
3. And measure its width.
4. Divide the resulting volume of the head by the width of the canvas.
5. Multiply the resulting number by 10.
6. Add two edge loops.

Stage two - knitting elastic

Hats look more beautiful and more expensive, knitted(this is also suitable for beginners), knitting of which begins with an elastic band. Then the product looks finished, and therefore more solid. Tying an elastic band is very simple. But first you need to cast on the loops. At first glance, this process may seem complicated. If you carefully look at the picture below, it will become clear that everything is quite simple.

So, here's what you need to know before knitting a hat for beginners. It's much easier to do the job step by step. Therefore, next we will look at knitting the elastic on our hat.

On hats, the elastic band looks the most beautiful: two knit stitches, then two purl loops - and so alternate until the end. Having cast the required number of loops - main + 2 edge loops (the result should be an even number), you can proceed directly to knitting the elastic.

How to knit knit and purl stitches

However, to knit an elastic band, you need to find out how the purl and knit stitches differ.

The front loop is performed on the side in front of the fabric. It is knitted by inserting the right needle into the first loop on the left needle and hooking the thread from which the fabric is folded. This is best demonstrated by the picture.

Purl, on the contrary, fits with reverse side products. The thread is placed over the right knitting needle, and then this knitting needle is inserted into the first loop, hooking the thread. Just as shown in the picture.

So, we have already said that in order to knit a hat for a woman, including beginners, you need to knit an elastic band. But it's important to do it right:

1. We simply remove the first loop.
2. Next we knit two facial loops.
3. And then purl two.
4. So we alternate until the end.
5. We knit the last loop like a purl.
6. Now we knit according to the pattern.
7. The number of rows is the height of the elastic, we determine it at our discretion.
8. When the elastic is finished, you can move directly to the hat pattern.

Stage three - knitting the pattern

Using the described principle, it is easy to knit a men’s hat with knitting needles for beginners. How to do it? In fact, the process is identical. And some of the execution of men’s hats will be even simpler than women’s. After all, they can be knitted from start to finish with an elastic band.

What pattern will be on the hat:

1. Since the hat described in these instructions is designed for beginners, we will study one of the simplest, but quite original patterns. It's called "rice".
2. In order to knit it, you must also alternate knit and purl stitches. The only difference is that now they will be one at a time.
3. So, let's remove the first loop.
4. We knit a series of facial loops.
5. Now in the next row we remove the first one again.
6. Then we knit, alternating one front and one purl loops.
7. We also remove the last loop.
8. We knit the next row according to the pattern.
9. Then we swap the loops. Where there was a front one, a purl one, and vice versa.
10. Thus, we get “grain grains” consisting of two rows of identical loops.

Stage four - rounding

If readers of this article have a desire to knit a hat for a girl (for beginners), it can be done. To do this, you will need to use the knowledge obtained in the instructions described above in relation to the child’s age and, accordingly, his head size.

So, having knitted the patterned fabric ten centimeters up, you should gradually reduce the number of loops. This is necessary so that the hat has a smooth and neat crown.

Decrease loops:

1. The first row is to remove the edge stitch, knit two loops according to the pattern, and the third and fourth stitches together.
2. The second is to not decrease anything, knit according to the pattern.
3. The third is to remove the edge, knit the next one, and then two together.
4. The fourth row is according to the drawing.
5. Fifth - remove the edge, knit the next two together. Repeat until the end.
6. Now we cut off a thread approximately 20-25 cm long.
7. We pass it through the remaining loops. As if stringing them together.
8. We disconnect the thread.
9. We hook one into the loop at the beginning of the row.
10. We tie the threads together, securing the loops.

Stage five - sewing the hat and trying it on

So, these instructions clearly explained how to knit a women’s hat with knitting needles for beginners. We hope our readers are convinced that this is not at all difficult to do. And now you can give free rein to your imagination. For example, knit funny ears to a hat or embroider a face. Then this product will certainly appeal to creative people.

And now there's just a little bit left to do. You just need to sew the resulting product and then try it on.

1. In order to connect the knitted fabric into a single whole, it is necessary to turn the product inside out.
2. Next, arm yourself with a needle, into which you should thread one of the threads with which we secured the loops.
3. Now use neat small stitches, using a seam “over the edge” to connect the fabric.
4. At the end, tie the thread. And hide it on the wrong side of the product.

Stage six - how to make a pompom

When the hat is sewn up, you can finish it and wear it like that. But it’s better if there’s a funny pom-pom on the top of your head—a furry ball. Such hats are now at the peak of popularity. Therefore, in a new, connected with my own hands The product will be both warm and fashionable.

Making a pompom is also very simple:

1. You need to cut a strip of cardboard of any width. This is the diameter of the ball.
2. And wind the knitting threads left over from the hat around.
3. No need to tighten too much!
4. When the desired volume is achieved, the thread needs to be cut.
5. Then stick it in thumb to the strip and pull the resulting skein together, holding the threads. The main thing is not to confuse him.
6. Now tie the future pompom in the middle.
7. Cut along the edges, straighten it into a ball shape.
8. Carefully tie or sew to the top of the hat.