What can be made from used old fur coat so that it continues to serve and be useful? In fact, such old things as fur coats can miraculously transform into a lot of beautiful and useful things!
At the same time, in a new guise, products made from natural or artificial fur can last quite a long time and decorate with themselves. modern wardrobe or apartment interior. So, what can you make from a fur coat with your own hands? Let's look at a few interesting ideas reincarnation of old fur products.
What can be made from an old cygeid and nutria fur coat (with photo)
What can be made from an old sage fur coat that has gone out of fashion? You can sew a fashionable sheepskin coat out of it if the item is not too worn out. To do this, you need to cut off the bottom of the fur coat and transform the top into new element clothes.
At the same time, it can be made fitted if the “original version” was too wide. You can add leather or leatherette inserts.
What can be made from an old nutria fur coat if it is very worn out? You can use it to sew a stylish vest that can be worn with a thin sweater or jumper. The style of this product can be very diverse, it all depends on the imagination of the needlewoman and the number of “live” fur flaps.
You can use a nutria fur coat to make a very fashionable fur vest with leather inserts on the sides and elegant buckles or shiny zippers. Not everyone can sew a zipper neatly, but even a novice seamstress can handle the lock on a vest in the form of a buckle.
What else can be made from a nutria fur coat if you already have a vest and short fur coat in your wardrobe? In this case, you can change a nutria coat for your child, because a large fur coat for an adult will definitely turn into a fur coat for a child. If there is not enough material, you can sew a warm vest and, in addition to it, a muff.
Photos of what can be made from a nutria fur coat are given below:
After familiarizing yourself with them, anyone can choose the most suitable “fur alteration” option for themselves.
What can be made from an old mink coat: a shawl and a hat
Still don't know what can be done from old mink coat? Be patient and make an elegant fur shawl out of it. To do this, you will need to cut the fur fabric into squares of the same size and crochet them. Then combine the resulting squares with airy “napkin” knitting into one openwork fabric.
You can make a wonderful one out of a mink coat that has failed winter hat. To do this, you will need patterns, which can be easily found on the Internet.
What can be made from an old fur coat: interior items
You can make something for your home from an old fur coat; the photos below clearly show that even not very experienced needlewomen can do such “crafts”:
For example, covers for stools and chairs will be a great addition to the kitchen interior.
This is the best thing you can do from an old fur coat, and the photos prove it:
In addition, making such capes will not take much time. All you need to do is cut out the flaps the right size with allowances for the hem, sew on the lining, trim the edges, pull in the lace to secure it to the chair.
If you have several old fur items in your wardrobe, you can easily make a beautiful bedspread or blanket from them. To make it, you need to tear apart the products and then fold the bedspread from the resulting flaps the desired shape. Baste all the seams, and then machine stitch and connect to the lining.
In the case where there is only one old fur coat and is well worn, you can use the same principle to make a small rug. To give it a more exotic look, you can cut out the silhouette of an animal, such as a bear, from the resulting fur fabric.
These are not all the ways to use an old fur coat! In addition, you can use natural and artificial fur to replace collars and cuffs with winter things, cut warm insoles for shoes, sew cozy slippers, warm high boots and soft decorative sofa pillows.
Those who have sewing skills will be able to use the fur scraps left over from alterations to sew soft toys.
What can be made from an old faux and mouton fur coat (with photo)
Don't know what you can do from faux fur coat that takes up space in the closet? Fur leg warmers will be an excellent accessory that will keep you warm on winter evenings. It is most convenient to use sleeves for these purposes.
Moreover, you don’t have to worry too much, you just need to cut off the sleeves, give them the desired length, remove any uneven edges and tuck them in.
A large overhead decoration looks like a ray more, if its main children or not flat, but convex, three-dimensional. A large and flat bouquet on a hat will look more like an applique from a children's album than a decoration for a headdress. Only when making boutique, “designer” hats can large flat elements be used for decoration, emphasizing a deliberately “childish” design or ethnic design motifs.
Volume can be given to the details of the decoration using plastic methods of shaping or constructive darts. tucks, gathers, etc. To make jewelry at home, you can use leftover fur, leather from old gloves or bags, fabric (to prevent the edge of the part from fraying, you can crochet it), felt and other materials.
1. Volume is added to the details of this decoration by making a dart. The larger the tuck opening, the more convex the part will be. You can use two darts to make the petals even more convex. The dimensions of the parts and the contours of their outer edges are determined solely by the design solution of the headdress.
2. Using a furrier's knife, cut flower petals from the fur. You can use any fur with short hair- seal, broadtail, cropped fur beaver or mink, etc. If the fur is too plastic, it can be duplicated - glued to skin that matches the color.
3. Stitch the darts using a straight-stitch or furrier's machine or sew by hand.
4. In the same way, complete the number of petals required to compose the flower (usually 5 or 6).
5. Sew the petals onto a leather backing.
6. Decorate the core of the flower beautiful button or other accessories. The decoration should be large enough to cover the junction of the petals. Attach a flower (or several flowers) to the headdress.
7. You can cover the junction of the petals by making the core of the decoration in the form small flower made of leather or base material.
8. Attach the core to the flower: sew a bead or other accessories onto the attachment point.
9. You can complicate the decoration by adding two or three leaves made of leather or other contrasting material. Details made of decorated leather look especially impressive. Leaves of different sizes look good when decorated. The design of the outer edge of the part depends on the designer’s intention.
Glue two pieces of leather together so that the wrong side is on the inside. Cut out the details according to the template.
10. Stitch the darts of the parts.
11. Attach leaves to decoration. Decorate the flower with beautiful fittings or cords from additional material, making two, three or four air loops. Attach to the head of the headdress.
A similar decoration can be made to update a leather or felt headdress, or to decorate a knitted hat.
The simpler the shape of the hat, the more complex and voluminous its decoration can be. And vice versa - hats of complex shapes prefer tactful and unobtrusive decor.
A large overlay decoration looks better if its main parts are not flat, but convex, three-dimensional. A large and flat bouquet on a hat will look more like an applique from a children's album than a decoration for a headdress. Only when making boutique, “designer” hats can large flat elements be used for decoration, emphasizing a deliberately “childish” design or ethnic design motifs.
Volume can be given to the details of the decoration using plastic methods of shaping or constructive darts. tucks, gathers, etc. To make jewelry at home, you can use leftover fur, leather from old gloves or bags, fabric (to prevent the edge of the part from fraying, you can crochet it), felt and other materials.
1. Volume is added to the details of this decoration by making a dart. The larger the tuck opening, the more convex the part will be. You can use two darts to make the petals even more convex. The dimensions of the parts and the contours of their outer edges are determined solely by the design solution of the headdress.
2. Using a furrier's knife, cut flower petals from the fur. You can use any fur with short hair - seal, broadtail, sheared beaver or mink fur, etc. If the fur is too plastic, it can be duplicated - glued to skin that matches the color.
3. Stitch the darts using a straight-stitch or furrier's machine or sew by hand.
4. In the same way, complete the number of petals required to compose the flower (usually 5 or 6).
5. Sew the petals onto a leather backing.
6. Decorate the core of the flower with a beautiful button or other accessories. The decoration should be large enough to cover the junction of the petals. Attach a flower (or several flowers) to the headdress.
7. You can cover the place where the petals meet by making the core of the decoration in the form of a small flower from leather or the main material.
8. Attach the core to the flower: sew a bead or other accessories onto the attachment point.
9. You can complicate the decoration by adding two or three leaves made of leather or other contrasting material. Details made of decorated leather look especially impressive. Leaves of different sizes look good when decorated. The design of the outer edge of the part depends on the designer’s intention.
Glue two pieces of leather together so that the wrong side is on the inside. Cut out the details according to the template.
10. Stitch the darts of the parts.
11. Attach leaves to decoration. Decorate the flower with beautiful fittings or cords from additional material by making two, three or four air loops. Attach to the head of the headdress.
Volumetric flower made of fur
When designing a pattern, you need to take into account that the size of the petals and the length of the fur strip depend on the properties of the fur. The more luxuriant the hair of the skin, the more plastic the leather tissue, the smaller the petals will be. Approximate dimensions of one petal: width 25-40 mm, height 12-20 mm (in the illustrations, for greater clarity, the height of the petals is increased). The length of the strip is approximately 45-60 cm.
Important! The direction of the hair (arrow in the photo) is from the bottom cut of the part to the top.
Prepare a strip of fur according to the size of the pattern. It can be ground from pieces that differ in shade and quality of hair. Make sure that the seams are parallel to the direction of the hair.
Using a furrier's knife, without cutting the hair, cut out the petals. The cuts between the petals should not reach 3-5 mm to the bottom edge of the part.
If the leather fabric is too stiff, light assembly is recommended along the bottom edge of the piece.
A flower assembled from two fur strips, each 25-35 cm long, looks especially impressive. The parts are superimposed on one another as shown in the figure (so that the middle of the upper petal falls on the cut along the lower part).
Along the bottom edge, the strips are ground on a furrier's machine. The rigid furrier's seam allows the cuts between the petals to be brought almost to the bottom edge of the part. This allows the petals to “open” and simplifies the manufacturing technology.
The first petal must be sewn in such a way as to create a voluminous and lush center of the flower.
Twist the piece into a spiral, simultaneously securing it along the bottom edge. When working, you need to make sure that the cuts between the petals do not overlap each other.
The bottom edge of the piece must be secured tightly enough so that the center of the decoration does not fall out.
Straighten and arrange the flower petals beautifully. Comb your hair. If necessary, glue a clasp to the base of the flower. The decoration is ready!
Fur flower “Rose”
Now the flower does not strive to become an acknowledgment of the hat - it seems to dissolve into the surface of the fur base, organically complementing the image of the headdress. At the same time, the decoration looks very cute and feminine. Therefore, decor made using this technology practically never goes out of hat fashion.
The effect of lightness and airiness of the decoration is achieved by sequentially attaching fur petals to the base. By the way, this decor option is very economical, because... to perform it, you do not need to cut out a part with predetermined parameters - the flap remaining after cutting is used.
To make a flower, it is better to use mink fur - natural or sheared - due to the good density of the underfur and the high plasticity of the leather tissue. Very beautiful flower obtained from light-colored mink with a noticeable difference in the color of the guard and underfur, as well as with “snowtop” dyeing effects (with bleached ends of the guard hair).
1. fur flower It is best done from the neck part of the skin. Short shiny hair The awns and thick underfur give the decor a special expressiveness; In addition, the neck often remains unused when cutting a headdress. If the spine along the ridge is very pronounced, it is not recommended to use this area, because Long coarse hair will stick out from the fur “bag” of the decor, which looks sloppy. Please note - in Fig. On the sides of the neck there are areas of less dense hair that are not used when cutting.
2. Flower petals can be different lengths. If you are planning to make a delicate and airy flower, you should assemble it from narrow (2-3 cm) parts. The petals are cut according to a pattern or cut out by hand. One end of the petal should be made slightly rounded - then when it is attached to the fur base, cuts of the inner layer will not be visible. If you use a fur flap 4-6 cm wide, the flower will turn out dense and lower. When cutting, pay attention to the direction of the hair.
3. Important! No matter how the flower is made, when cutting out the details of the decoration, it is important to avoid areas of fur with a sparse underfur, otherwise, when the part is folded, the light core of the skin will show through.
4. First, you should secure the sharp end of the petal. In this and some subsequent illustrations, a paper base and threads of a contrasting color are used for clarity.
5. Each petal is attached to the fur base in several places - the longer the part, the more attachment points. The distance between the attachment points is approximately 2 cm. The part should be sewn onto the base in a spiral (the places of successive punctures are indicated in the photo by arrows).
Important! When sewing on a petal, the thread must be secured in the core of the base each time, otherwise during use the flower petals will lag behind the product.
When cutting out details, you can use fur of different tones or even different colors - this will help highlight the core of the flower, and in a large decoration - individual petals. When making decorations, it is necessary to take into account that the direction of the hair of the flower details should be in one direction.
6. The outer petals grow as the flower is made. When applying petals, you need to make sure that the hair of the decorative parts covers the sections of the inner layer. The shorter the hair, the closer friend For a friend you need to sew on flower details. If the hair of the skin is long enough, to make the decor more expressive, the petals are sewn at some distance from each other.
7. When making a flower from a wide fur flap, it should be taken into account that when the part is sewn onto the base, it is simultaneously gathered onto a thread in the transverse direction. This allows you to achieve the effect of the play of flower petals.
8. For a more precise placement of the decor on the product, it is recommended to first place a mark in the middle of the flower, and in some cases (if there is a lack of experience in working with fur, as well as with the in-line method of making fur hats) - to mark according to the template. To make a template, you need to sew fur petals onto a sheet of whatman paper, then reverse side sheet, following the thread with a felt-tip pen, mark the puncture sites and the lines for laying the thread. At the puncture sites, make holes for marking.
9. A fur flower looks good as an independent decoration. It is also suitable - as the main motive - for more complex decor. Let’s look at the “Rose with fur leaves” design option. This decor looks great on a fur hat; As a decoration for knitted and felt products, it should be used with caution, because an open cut of the flesh may be visible along the barrels of the leaf parts.
Please note: when designing a sheet part based on its base (cut), an allowance for a fold of 2-5 cm is placed in the pattern, depending on the size of the part.
10. To give the decor volume, it is necessary to make a fold at the cuttings of each leaf.
11. The finished parts should be sewn under the flower so that the outer petals of the flower cover the sections of the inner layer at the base of the leaves. Attach the leaves along the edges to the fur base. By the way, an ornament of petals and leaves can become an original decoration for a headdress. The overlay decor can be decorated with beads, small sequins, and leather cord.
A large overhead decoration looks like a ray more, if its main children or not flat, but convex, three-dimensional. A large and flat bouquet on a hat will look more like an applique from a children's album than a decoration for a headdress. Only when making boutique, “designer” hats can large flat elements be used for decoration, emphasizing a deliberately “childish” design or ethnic design motifs.
Volume can be given to the details of the decoration using plastic methods of shaping or constructive darts. tucks, gathers, etc. To make jewelry at home, you can use leftover fur, leather from old gloves or bags, fabric (to prevent the edge of the part from fraying, you can crochet it), felt and other materials.
1. Volume is added to the details of this decoration by making a dart. The larger the tuck opening, the more convex the part will be. You can use two darts to make the petals even more convex. The dimensions of the parts and the contours of their outer edges are determined solely by the design solution of the headdress.
2. Using a furrier's knife, cut flower petals from the fur. You can use any fur with short hair - seal, broadtail, sheared beaver or mink fur, etc. If the fur is too plastic, it can be duplicated - glued to skin that matches the color.
3. Stitch the darts using a straight-stitch or furrier's machine or sew by hand.
4. In the same way, complete the number of petals required to compose the flower (usually 5 or 6).
5. Sew the petals onto a leather backing.
6. Decorate the core of the flower with a beautiful button or other accessories. The decoration should be large enough to cover the junction of the petals. Attach a flower (or several flowers) to the headdress.
7. You can cover the place where the petals meet by making the core of the decoration in the form of a small flower from leather or the main material.
8. Attach the core to the flower: sew a bead or other accessories onto the attachment point.
9. You can complicate the decoration by adding two or three leaves made of leather or other contrasting material. Details made of decorated leather look especially impressive. Leaves of different sizes look good when decorated. The design of the outer edge of the part depends on the designer’s intention.
Glue two pieces of leather together so that the wrong side is on the inside. Cut out the details according to the template.
10. Stitch the darts of the parts.
11. Attach leaves to decoration. Decorate the flower with beautiful fittings or cords from additional material by making two, three or four air loops. Attach to the head of the headdress.
Soft and delicate fur has always been the ultimate dream of any self-respecting woman. It is used not only for tailoring and interior decoration, but also for creating original jewelry. Naturally, they cannot compete in terms of their cost. jewelry, but as for the trends of the season, their constant component, along with others natural materials, is natural fur.
On a note: Fur jewelry is not always popular, but only in the autumn-winter period.
Did you know that in Rus' women have worn fur accessories, including jewelry, since time immemorial. In some areas of central Russia, long pendants and earrings were in use, which were attached to headdresses, at the ends of which hung pompoms made of fur.
Ponytails were also used as accessories to decorate necklaces on the wrist, bags and hats.
What kind of fur jewelry is made from fur?
Nowadays, it is unlikely that any girl would want to hang rabbit feet or the tail of some fur-bearing animal on herself. On the contrary, from an aesthetic point of view, fur jewelry should look so that it in no way resembles that it is made from animal fur.
Neckpiece
Fur decorations include fur jewelry, which can replace a collar or scarf. The story tells that it was by looking at the boa that designers came up with the idea that fur could be used to create necklaces, pendants, pendants and even beads.
Fur brooch
A single brooch on the chest is unlikely to attract much attention, but a set of earrings and a fur bracelet is unlikely to leave anyone indifferent.
You can buy a fur brooch, or if you wish, you can make it yourself. To do this, you can use the fur of an old fur coat, mitts, hats, or whatever! Jewelry made from fox, nutria, silver fox, mink, arctic fox, sable, and raccoon fur looks beautiful. This fur has fur of different lengths, and this can be played up by creating a fur brooch.
For example, you can make a brooch with different leaves. Flowers with petals in several rows look original. You can revive a flower by adding rhinestones, beads, beads and even leather.
What to wear with a fur brooch in 2017?
You can wear this decoration on a hat or on a sweater with a high neck. You can attach it to your coat or to knitted scarf. A fur brooch on a bag, especially a fur one, looks original. Don't forget about the dress. The fur brooch looks especially good on him.
How not to wear a brooch:
1. Do not wear a brooch with a necklace at the same time
2. On clothes of the same color as the brooch
3. On brightly patterned clothes
4. Don't wear more than one brooch
5. Don't carry it anywhere
Fur bracelets
Rings cut from a plastic bottle can serve as the basis for a fur bracelet. You can turn it into a bracelet different ways. For example, a strip of fur is wound around it in a spiral; you can even alternate fur of different textures and colors.
The bracelet can be wrapped faux fur with an animal print, such as a giraffe or leopard. This way you will get an original bracelet that no one else will have. Fur can also be combined with stripes denim, make leather appliqués, hang it with a metal chain or decorate it with stones.
What clothes to wear with a fur bracelet:
You can wear almost any warm clothing with a fur bracelet, but preferably a dark color. These can be sweaters, jumpers, turtlenecks, as well as narrow long dresses.
Fur earrings
Models of earrings with an elongated oblong shape look beautiful. The fur balls at the ends of the metal chain are especially elegant. Large hoop earrings, which are completely covered with fur, look original.
What to wear with fur earrings?
The choice of earrings depends on the shape of the face, but fur earrings look best on girls with long hair or, on the contrary, with short-cropped and neatly styled hair.
Necklaces, beads, pendants and necklaces made of fur
Fur beads look beautiful with wood and glass beads.
