DIY fur bubo for a hat. How to make a fur pompom for a hat with your own hands. Caring for fur pompoms

With the onset of cold weather, any girl thinks about how she will look in the upcoming season. One of the ways to update your usual wardrobe is to decorate it, in in this case, pompoms made of silky natural fur or cozy soft yarn. Fortunately, making them is not difficult at all.

Preparatory stage

Before creating a pompom, you must first select and prepare the material.

Fur selection

When it comes to wearing, faux and natural fur are not very different from each other, but it’s still worth knowing a few features of each in order to make the right choice.

Features of faux fur:

• easier to work with compared to natural ones;
• it is easier to care for and can often even be washed in a washing machine;

Features of natural fur:

• among natural furs Otter, sable and mink are considered the most durable, and hare fur wears out the fastest;
• The easiest to work with will be mink and fox furs, they are pliable, have a thin core (the base on which the fur is attached), and the fur is not very long, so it does not interfere with work.

Advice! To check the quality of the fur, be it natural or artificial, run your hand over it, as if combing with your fingers. The more lint remains on your hand after this action, the poorer the quality of the fur you tested.

Washing and drying natural fur

New fur does not need to be washed, but if you decide to use a piece from old fur coat, for example, washing is a necessary stage of preparation.

Suitable for this special remedy for washing fur or a solution that you can make yourself. To do this you will need:

• washing powder- 5 g,
• ammonia - 5 g,
• salt - 15 g,
• soda - 10 g.

Mix all ingredients and dissolve in 1 liter of water at room temperature. Then, using a soft brush, carefully apply the solution to the entire surface of the fur and the inside, massage for 1 minute and rinse thoroughly under running water.

Note! The fur should dry naturally, at room temperature. You cannot dry it with a hairdryer or battery, as it can dry out and the flesh will “shrink” from high temperature and the cut will be irrevocably damaged.

Painting

If the old fur needs updating or you are not satisfied with the shade of the new one, you can dye it. This is done using a special dye, which can be found in specialized stores, or with regular hair dye.

Before using paint, test it on a small piece. To avoid surprises if the resulting color is not what you expected

Coloring is carried out in just a few steps:

1. Treat the flesh with glycerin, Vaseline or any other thick cream so that it does not dry out during the process.
2. Paint the fur according to the instructions for the chosen paint.
3. Rinse well under running water and then place in a warm vinegar solution (use 1 tablespoon of vinegar per 1 liter of water) to consolidate the result.
4. Now re-treat the fur with the cream that you used in the first stage, and then pin the fur with buttons to any hard surface and let it dry. This way it will not shrink during the drying process.

To make the fur softer and more moisturized, between the dyeing stage and vinegar rinsing, you can treat it with any hair balm.

Video: how to dye fur at home

How to make a fur pompom for a hat with your own hands

We will need:

• fabric chalk or soap,
• stationery knife,
• strong threads in the color of the flesh,
• needle corresponding to the thickness of the mesdra (from 40 to 120),
• thin lace or ribbon in the color of fur,
• filler (even regular padding polyester or pieces of materials will do).

Stages of work:

1. On back side using a stencil or compass, draw a circle.
2. Cut carefully to avoid trimming the fur.
3. Sew along the edge of the circle using small stitches. When finished, do not break the thread.
4. Take some filler and place it in the center of the circle, tighten the thread, fasten and cut.
5. Add filler if necessary.

Sew the finished pompom where necessary. If you want it to be removable, sew one half of the rivet to it, and the other half to the product on which the pompom will be attached.

How more pompoms, those bigger size he needs a rivet

Video: how to make a fur pompom with your own hands

Caring for fur pompoms

Fur pom-poms do not require complex care, except for infrequent washing, for example, with one-time stains or at the end of the season, they require washing with a solution, which was described in detail above, or with a special product.

Advice! If the fur on the pompom has become wrinkled as a result of storage, simply spray it lightly with a spray bottle, comb it with a wide-toothed brush and dry it by hanging it upside down. When the pompom is completely dry, comb it again and it will take its proper form.

Yarn pompoms are very easy to make, we will look at several ways to create them.

Note! The size of the pompom depends on the distance of the thread from the core to the edge, and its volume depends on the number of circles wound.

Method No. 1

The simplest option.

Video: how to make a pompom on your fingers

Method No. 2

Making a pompom using cardboard rings.

A pom-pom made using this method turns out to be the most even and neat.

This way you can make a perfectly even pompom.

This is interesting! There are even special devices for making pom-poms from threads; they are similar to the devices that we made in this MK.

Video: how to make a pompom from threads with your own hands using cardboard rings

Method No. 3

This method is perfect for making small pompoms.

1. Take a regular fork in your hands and wind the thread several turns between the 2nd and 3rd teeth to secure it.
2. Next, wind required amount thread on all fork teeth.
3. Thread the thread between the 2nd and 3rd cloves and tie the main winding in the middle.
4. Remove the threads from the fork. Cut loops of thread on each side.
5. Fluff the pompom.

Video: how to make a pompom from threads using a fork

Method No. 4

A very simple way to make a lot of small pompoms at once.

1. Take any stool and turn it upside down.
2. Wind the required amount of thread around the legs.
3. Cut a lot of threads of 7–10 cm.
4. Take one short thread at a time and tie each one on the wound threads, at a distance from each other equal to the size of the desired pompoms.
5. Cut the wound threads exactly in the middle of each segment.
6. Label each pompom.

Advice! If you need a lot of pompoms at once, you can put 2, 3 or even 4 stools together and wrap threads around the corner legs. This way, the winding length will increase significantly, and, accordingly, the number of finished pompoms will increase.

Video: how to make many pompoms at once using a stool

Photo gallery: ideas for using fur pompoms

If you use pompoms bright colors, this rug is perfect for a child's room If you have time and a large supply of fur, you can even sew such an unusual cape, and if you play with colors and make it, for example, in delicate pink tones, you will get a very unusual, exclusive item
A manicure decorated with tiny fur pompoms looks very cute and unusual.
You can get a very soft and unusual rug if you make it entirely from fur pompoms
Short felt boots, decorated with fur pom-poms of a suitable shade, look very stylish on women.
Children's shoes decorated with pompoms look even more adorable. You can make a very stylish keychain from a fur pompom and decorate your keys or bag with it
Such hairpins may be suitable for some theme party or for little girls
Very cute and unusual fur pompoms complement an ordinary sweatshirt

Idea! In all examples of the use of fur pompoms, the latter can be replaced with yarn pompoms.

We hope our article helped you successfully cope with all stages.

If you liked the idea of ​​how to make a pompom for a fur hat, but didn’t have any suitable material at hand, then use regular threads. You can make decor for a headdress from ordinary yarn; you will also need rectangular or round patterns to complete the work. By applying the pattern from the wrong side to the fur, you can easily cut out the required number of blanks of the required size. This will allow you not to pull out the thread when tightening, since an ordinary knot on the thread without fastening will simply slip through the place where the needle was pierced. Be sure to secure the threads. The thread should pass inside the fur so that the stitches are not visible. Using the first stitches, secure the thread to the base of the fur skin without a knot (double stitch with tightening).

Children's hats with a fur pompom will delight your little ones. If you have a lot of faux fur, then trim the hem of a blouse, a handbag, or even make a scarf. In general, to make children's hats with a fur pompom, take fur or fur trimmings, a needle, strong thread, a special filler in the form of synthetic padding, cotton wool, cardboard and scissors. Initially, a pattern for the pompom is made (although some needlewomen can do it perfectly well without it). To do this, a circle of the required diameter is cut out of cardboard using scissors. The larger you want to make the pompom, the larger the blank. A pompom is a voluminous fur ball (sometimes an oval or a bell), made either of thread or fur (both natural and artificial). Bright and airy, fur pom pom toys are great as a warm and cozy personalized gift.

https://youtu.be/WnsXiHDZmFQ

Remove the pompom blank from the needle gradually, but do not pull the needle straight away; you should get some kind of curls. Make sure that it does not peek out from behind the pompom, but at the same time holds it well (even in windy weather). On the fifth round, I was already cutting the fabric with a minimal amount of lint on my clothes. You can use a blade or a special sharp knife to cut the flesh. Of course, this is a little longer and more difficult than using scissors, but the latter often damage the pile, as a result of which the finished product looks extremely untidy.

Fur pompoms are a great way to decorate even the most boring item. Making pom-poms from fur is very simple, be it artificial or natural. See for yourself - to sew a fur pompom, you just need to be able to hold scissors and a needle in your hands. Then pull the padding polyester with fur and carefully sew up this structure, you get quite cute and fluffy pompoms with which you can decorate a hat, shawl or winter jacket. When the pompom is ready, attach it to the elastic band. Next, let's talk about how to attach it to the headdress. Pull the braid to the wrong side of the hat and secure it there with a knot or sew it on. With their help, you will later attach the pompom to the hat. By the way, use the same thread that was used to secure the pompom.

When sewing a self-made pom-pom onto a hat or beret, make sure to do it in at least 4 points, especially if the decoration is large. And if you get a very large hole, go over it with a needle with a thread threaded into it, creating a cross pattern: this kind of barrier will prevent the filler from falling out. It withstands washing remarkably well, unlike cotton wool (it quickly clumps into a lump) or foam rubber (this can generally get damaged quickly). But also take into account the length of the pile itself. And yet, it is still better to do this procedure in a laundry bag. To make pom-poms with this kind of filling, you need to carefully and thoroughly wet the inside using a sponge (or cotton wool) soaked in warm water. After the shred is ready for use, it can be dyed, if necessary: ​​craftswomen recommend using regular ammonia hair dye. Or start cutting right away.

In order to make a pompom from fur, you need to choose the fur you like, cut out a circle of the required diameter from it, you need to do this using a stationery knife, then the fur will not be damaged. Cut the fur with a stationery knife or razor on the reverse side so as not to spoil the hairs. Place a lump of padding polyester in the middle. Now you need to carefully tighten the edges of the skin by pulling the thread. If necessary, add more padding polyester. We tie the ends of the threads, with the same thread you can sew a pompom to the product. When performing this manipulation, make sure that the filler remains in the middle of the product, and the ends of the braid are on the outside. Make the next puncture from the wrong side.

I made the pom-poms in a size that allowed me to use the size of the material. And I decided to make one pom-pom larger, so using the principle of selecting scraps, I sewed two strips of fur together using a furrier’s stitch to make a larger square. To do this, you need to take a small piece of fur and put a little padding polyester inside it. Tie with a cord or ribbon, as shown in the photo. Leave long ends to then attach the pompom to the product. Fold it in half with the fur inside and insert the lace.

Fur pompoms are an excellent accessory to warm winter things. They are often used to decorate hats and scarves for children. But girls are not averse to wearing things with fur details. It looks bright and fashionable.

• fluffy fur,
• cardboard/paper,
• scissors,
• stationery knife,
• needle,
• strong threads (to match the color of the fur),
• pen,
• lace or ribbon,
• padding polyester,
• compass.

Step-by-step instructions “Do-it-yourself fur pompom”

Step 1

Using a compass, draw a circle of the required diameter on paper or cardboard. If there is no compass, draw a pen around the bottom of the jar. Using scissors, cut out the resulting template. The larger it is, the more voluminous the pompom will be.

Step 2

Now we apply the pattern to the back of the fur. We also trace it with a pen and cut it out along the contour with a stationery knife.

Step 3

We sew the circle with large stitches of thread over the edge. The ends of the threads do not need to be secured.

Step 4

Sintepon (cotton wool or foam rubber) will add volume to the product. It must be rolled into a ball and tied with ribbon.

Step 5

Leave the long ends of the tape. This way you can attach the pompom to the product.

Step 6

Tighten the threads into a strong knot and sew up a hole if there is one left. If you do not need to leave the tape outside, then the padding polyester does not need to be rolled up. It is enough to push the filler inside with a knitting needle until the desired volume of the product is obtained.

In general, fur waste, fur collars, and hats are suitable for making pom-poms. They can decorate more than one thing. The most interesting version is a one-piece scarf made of pompoms.

It's elegant and luxurious. This is how pom-poms can add chic to old items. They can be made in any quantity and any size with your own hands.

More recently, headdresses decorated with pom-poms were considered exclusively part of a child's wardrobe. But modern realities are such that almost all women and girls who want to look stylish, bright, and bold wear them. If you like to do handicrafts, then this article will definitely be useful for you, because in it we will describe in detail how to make a fur pompom for a hat yourself, and we will give a few more interesting ideas creating jewelry.

Making a chic fur pompom with your own hands

If you want to add original accessory your wardrobe, then try making a fur pompom for a hat with your own hands. Modern fashion only welcomes the use of fur accessories.

Materials for work

The process of making a pompom is divided into several important stages, but it all starts with the purchase of a piece of artificial or natural fur.

You will also need for work:

• soap or pen;
• round pattern;
• threads to match the fur;
• needle;
• sharp scissors;
• a piece of ribbon or lace;
• synthetic winterizer as a filler.

How to prepare the fur for work?

Every girl has an old one at home, already useless thing from fur. So, if you decide to make a pompom from your grandmother’s hat or collar, you will have to prepare the material so that the resulting product looks neat and beautiful.

Follow this diagram:

• Wash. For this, prepare a solution consisting of 1 teaspoon of ammonia, 2-3 tablespoons of salt, 1 spoon of hair shampoo, 2 tablespoons of soda and a liter of warm water. Soak the fur in it and use a small brush to clean it. Then rinse off the remaining solution with plenty of running clean water and let the fur dry naturally.

Important! Be careful to ensure that the fibers are not damaged during cleaning and that the base remains intact.

• Coloring. If you are not satisfied with the fur color, you can easily change it. Use regular hair dye for this. Prepare the paint of the desired color according to the instructions in the box and apply it to the fur. Perform all manipulations with gloves in order to rub the paint into the fibers as best as possible, and this will also prevent the appearance of unpainted areas. After the specified period of time, wash off the paint.

Important! Never use a hair dryer to dry fur, as it can damage it.

How to make a pompom?

At this stage we will look in detail at how to make a fur pompom for a hat. The master class below will allow you to do all the work efficiently and quickly:

• Place the fur, base side up, on a flat surface. It is advisable to secure it with pins, for example, on an ironing board.
• Using a circular pattern, such as a cup or saucer, draw a circle on the surface.
• Using sharp scissors, carefully cut out the circle, being careful not to damage the fur located underneath. If you are uncomfortable using scissors, use a utility knife.

Important! If you don’t get a perfectly even circle, then you shouldn’t be upset, because this will not affect the appearance of the product in any way.

• Take a needle and thread, sew large stitches around the base in a circle. Make sure that while working, the thread is always inside the circle, and the front side is not noticeable.

Important! If the thread gets caught in the fur, try to release it as carefully as possible. At the beginning of work, do not make a knot, because it will still slip through the base.

• Secure the thread with securing stitches.
• Determine by eye how much padding polyester you will need to fill the pompom, then tie it with ribbon or lace.
• Sew the circle to the very end, tighten the thread, thereby forming the future decoration.
• Place the synthetic padding inside the pompom, leaving the tails of the ribbon outside, tighten the thread to completely close the hole.
• The remaining ends of the tape will be useful for attaching the product to the hat.

Making your own pompom from yarn

If you liked the idea of ​​how to make a pompom for a fur hat, but didn’t have any suitable material at hand, then use regular threads. You can make decor for a headdress from ordinary yarn; you will also need rectangular or round patterns to complete the work.

In principle, you can make a template yourself.

Important! Remember that you will never get a perfectly even pom pom using any of the more popular methods. it will still have to be leveled and cut with scissors by hand. To get a beautiful velvety product, use only thick, soft threads.

How to make a plain pompom from yarn?

To begin, prepare a piece of thick cardboard, a ruler, sharp scissors, a pen, yarn and an awl. The operating procedure looks like this:

• Cut out two rectangular templates from cardboard. Please note that the size of the bubo will be the same as the width of the rectangle. Leave a few centimeters to spare.

Important! The length of the patterns does not affect the size finished product, but it is better to make it at least 15 cm, so that later it will be convenient to wind the threads.

• Take a ruler, determine the center of our rectangle, and at this point make a puncture with an awl. Then with right side cut it to the puncture point.
• Pierce the rectangle on the left in two places at a distance of a few centimeters from the edge, and use scissors to make cuts.
• Thread a long thread through a needle, fold it in half, and thread it into the finished template.
• Wind the thread from the ball onto a cardboard template.
• Move the wound thread to the right, towards the large cut.
• Then tighten the yarn as tightly as possible with a thread and a needle.
• Sew the pompom several times in the center, fasten the thread, but do not cut it.
• Insert scissors between the two templates and carefully cut the threads.
• Remove the product from the patterns, straighten it properly and trim it with scissors.

All is ready! All that remains is to sew the pompom to the hat with a needle and thread.

How to make a multi-colored pompom?

In this case, use threads of several colors that match each other in color and texture. This element can not only decorate a hat, but also make the interior more comfortable.

A lot of original ideas appear among restless craftswomen at the sight of pom-poms. Experienced knitters can use them to create a huge number of unique and unrepeatable items. These products have only one drawback - their high cost. What if you make a fur pompom with your own hands, taking scraps from an old hat or collar? For skilled needlewomen, such work will not create difficulties.

So, how to make a fur pompom? Let's figure it out now! After all, the process of creating a fluffy accessory is quite simple and does not require serious skills.

What are pompoms used for?

These fluffies can be used to decorate children's scarf, hat, mittens.

If you make several small pompoms, then it is quite possible to decorate interior items with them, such as pillowcases for sofa cushions, blankets, etc.

A rich and luxurious stole will be made from large quantity parts like this - it will take a lot of time to create them, and the work will be difficult, but the result is worth it.

Nowadays, various fur jewelry - brooches, key rings, hair clips - are considered very fashionable. They look very interesting.

Tools and materials for work

If you follow our description in the process of creating pompoms, there will be no difficulties, but this activity will bring joy. How to make a pompom from fur? Make a few pieces with your child - he will be happy!

In order to make a fur pompom with your own hands, you need to prepare the following tools and materials:

• Pieces of high-quality fur - artificial or natural, whatever it is.
• A piece of thick cardboard from which you will cut out a pattern using a compass.
• A needle with a very strong thread.
• A knife or scalpel for cutting the flesh.
• Synthetic padding or cotton wool - to add volume to the pompom.

And, of course, stock up on sharp scissors.

If you have no experience working with fur, take softer fur - mink, fox. This texture is much easier to assemble round shape. A pompom made from mouton pieces is more difficult to make; it will bulge, bunch up and look sloppy. Experienced craftsmen make darts on patterns from the edges to the middle, sew them together, and only then pull them into a ball. This is a rather difficult task, not suitable for inexperienced craftswomen.

Please note that there are no damaged areas on the fur piece; the pile should not “shed”. To check, you just need to run your palm over the fur and assess the condition of the flap.

Each skin has its own strength. The most wear-resistant are otter and mink. Next after them - sable fur. The most delicate and fragile is the rabbit. For example, pom-poms on hats interact little with other surfaces, but scarves constantly rub against clothing. Also, the finishing of bags and sofa cushions undergo mechanical damage. All this must be taken into account when choosing a material for a particular product.

For example, mink is a fairly easy material to work with. The fur has short elastic fibers; it is very convenient to carry out various manipulations with it.

Rabbit fur is also an affordable and pleasant material for making real fur pompoms. Yes, the fur is delicate and cannot be washed, but this is not a problem either. Below we will describe a way out of such a situation.

Cutting a blank from these types of fur is much easier than if you take long-haired material. You can even use scissors with round tips.

Preparing the skin for the pompom

So, you have decided to take on making a pompom yourself. When using old skins that have faded and lost color, you can simply dye them with regular hair dye.

Before doing this, clean the pile from dirt, in otherwise The paint will not be absorbed evenly and you will end up with a poorly painted product with streaks and stains.

Let's wash the fur. To do this, prepare the following composition:

• water - 1 l;
• washing powder - 6 g;
• ammonia- 7 ml;
• salt and soda - 10 g each.

Dissolve all ingredients in water and carefully apply to the fur with a soft brush, leave for five minutes and rinse with plenty of water.

Now you can start painting. Be sure to apply the mixture to a small piece of fur to see what shade you get as a result.

Take a paint darker than the color of the fur itself, otherwise the result may be unpredictable. Let's say mink fur when lightened it gives an unpleasant yellow tint.

The core must first be treated with glycerin or fatty cream - this will prevent it from drying out and being damaged by the paint.

Take your time, apply the coloring composition evenly to the entire surface of the pile. Follow the instructions included with the paint - the composition of animal hairs is similar human hair, so all processes proceed the same way.

After curing the dye, rinse the fur in water, carefully washing away all particles of dye, and in order to consolidate the result, place it for a while in a weak vinegar solution. It is acceptable to apply balm or use conditioner.

After all water procedures Dry the fur piece by laying it on a soft towel. Do not use hair dryers or fans under any circumstances - the fur will become brittle!

How to make a fur pompom for a hat

That's all, you have prepared the fur, all that remains is to do the most important thing. Let's start making the pompom!

To get started, prepare a pattern - to do this, draw a circle of the required diameter on cardboard. It will be 5 cm larger than required for the pompom.

Now place the pattern on the inside and transfer it with a piece of chalk, soap, or a pen - it doesn’t matter, everything will remain inside the finished pom-pom.

When cutting, the size of the fur piece is very important - from a large piece it is much easier to cut out a circle of the required radius for a fur pompom. How to make it neat and beautiful will be described below.

Another important criterion is to determine how the pile is directed. If it is long, then this does not play a special role, but for short hairs it is important.

When cutting, use a scalpel or a stationery knife. It is advisable not to use scissors - you may damage the fur.

Having cut out the desired piece, sew it with large stitches along the edge. Do not make a knot at the end and do not secure the thread at the end. Next, by pulling these ends, you can tighten the part. To add volume, place a piece of prepared filler inside and finally tighten the thread. Tie the thread tightly and hide it inside the pompom.

All is ready. All that remains is to sew it onto a hat or scarf.

Fur products with long pile

Long pile makes work much easier on the one hand, but also brings its own difficulties on the other.

For example, the advantages are that it is not necessary to cut the pattern in the shape of a perfect circle - here everything will be hidden under the fur.

Be sure to cut with a scalpel or a special knife, since the blades of scissors can easily ruin the fibers. Cut on wood or plastic, avoiding damage to furniture.

It is better to tie a piece of filler with a ribbon in the color of the pompom - it will not allow it to get into the tightened thread.

After everything is tightened and tied with several knots, the tape can be removed. But sometimes it is left in order to attach the pompom to the required place.

Long fibers can get under the thread and get confused, and maybe even tear it. Check this very carefully - unattractively folded fur and protruding threads, even if they match in color, look terribly sloppy!

Pompom made from fur scraps

It’s good when there is a large piece of fur, but if only scraps, and even those narrow or irregular shape? How to make a fur pompom for a hat in this case?

If there are several small pieces, simply use furrier's stitches to sew them into a rectangular panel. Then, from it it will be possible to make a pompom using the technique described above.

A pom-pom from a strip of fur can be made as follows: roll it in a spiral and sew it, getting a round piece. The further course of events is the same as before.

Removable pompom

Such a fluffy one is completely indistinguishable from ordinary ones sewn to a hat or scarf. But such products are much easier to maintain. After all, it is much more convenient to simply unfasten the fur, wash the item, and then fasten it again. There is no need for constant sewing and cutting.

The only thing important rule here - the button must match the pompom. It should not be visible, but it should also hold it very well. Otherwise, you will simply lose your pompom on a windy day.

How to make such an accessory? Simply and easily! The pompom is created in the same way as described earlier, and the button is unfastened and one half of it is attached to the hat, and the second to the pompom.

Faux fur pom poms

This product has a not so rich appearance, but such pompoms are also in great demand. It is much easier to work with faux fur, and it is also more affordable. Even machine washable.

You act similarly to the description suitable for natural fur. To cut, take scissors and cut with the very tips, avoiding touching the pile.

The thread is not the strongest, but ordinary thread is enough for sewing.

Washing together with the product is acceptable, because of this, artificial parts are sewn directly to it.

A pompom made of fur... We've figured out how to make it. And what it will be - natural or artificial, large or small - it’s up to you!