Crocheted boots with felt soles will be soft, warm and beautiful. Felt insoles do not knock on the floor, are thicker than knitted soles and significantly save thread and time spent on knitting.
To create such knitted boots we will need felt insoles (they are the cheapest and are sold in shoe stores).
You can choose the thread color and yarn composition yourself; we use “handmade pekhorka”, high-volume acrylic, 50 g/200 m in length. In total, the boots will need about 100 grams of yarn.
Let's take hook No. 2. Also, to prepare the insole, we will need nylon threads, you can, of course, use yarn, but it will quickly fray from wearing on the floor, so it is better to take nylon threads, not very thin, such as can be found in fishing, hunting or hardware stores.
Master class: how to knit boots
Using a needle and thread, sew a buttonhole stitch around the entire edge of the insole.
By the way, nylon threads very easily creep out of the knot, so it would be good to fuse their ends to the knot.
Then the actual boots begin.
Bottom.
1 row. We start from the middle of the heel. We tie single crochets around the entire perimeter.
We got 130 sc (single crochet).
2 – 4 rows. 130 sc.
5 row. 130 – 1 = 129 sc. On the sock itself, in the middle, we will shorten the loops by one. After the post, we’ll pull one loop onto the hook, then another one, and knit all three with one loop.
Then we knit as we knitted.
6th row. 129 - 2 = 127 sc. We will repeat the contraction on the sock, but not in the middle of the sock, but in the corners that are on the insole. There will be about 6 columns left in the middle, and they must be kept unchanged on the other rows.
7th row. 127 - 2 = 125 sc. We make abbreviations there.
8 row. 125 - 2 = 123 sc. We shorten it the same way.
9 row. 123 - 2 = 121 sc.
10 row. Let’s also start before the moment when we made two cuts in the row, immediately after the cut, we’ll make 1 connection. loop into the next stitch of the row, turn around, make 1 skip and knit those same 6 unchanged stitches on the sock. Let's make one more loop skip and one connection. loop into the next column in order and unfold the slippers. Let's make 6 front columns, make a reduction again and continue the row to the end.
11th row. We reach the toe, 2 contractions, 1 sp (connecting loop), unfold, 6 sc, 1 reduction, 1 sp, Let's return to the front side, 6 sc, 1 reduction and extend the row.
12 – 18 rows. Repeat row 11.
19 – 21 rows. 72 sc.
Shin.
22 row. Our row begins and ends at the heel. 4 runways (lifting air loop), then through the column we make 1 double crochet (dc), 1 chain loop (ch), 1 dc, 1 ch. Until the end of the row. we knit.
23 row. In each opening formed between the double crochets, we make a magnificent column.
24 row. Let's do it like row 22.
25 row. Let's do it like row 23.
26 – 37 rows. 4 ch, 1 dc, 1 ch, 1 dc, 1 ch, to the end.
38 row. In the space between double crochets we make 36 ps.
39 row. Again the row is as follows: 1dc, 1 ch, 1 dc, 1 ch, etc.
40 row. Let's repeat row 38 with ps.
41 row. In this row we make double crochets in each loop of the underlying row 72 dc.
42 row. Let's complete the boot with 72 sc, cut and hide the thread.
Finishing.
For finishing we have prepared some gray and white yarn of the same thickness. It is very convenient to make a loop at the end of the thread and use it as the first loop.
In the mesh part of the shin, preferably at the back, we begin to pull out the loops with gray thread and knit them through the mesh.
The gray runner is embroidered.
Let's do the same with white thread in the remaining empty openings.
Now we decorate the sock. Along the bottom row of double crochets we sew a row with white thread.
Let's go along the sock, fasten and cut the thread.
We do the second boot in the same way.
Cord and tassels.
Let's cut several threads at once, approximately 80 - 90 cm, and secure one end with a knot.
We braid the braid and also tie the other end. You can immediately make a second braid.
We will cut the threads for the tassel of the length that we have determined for ourselves, but multiplied by two, we will thread a thread inside with which we will tie the tassel itself to the lace. Place the lace over the bun and tie it above the knot. The knot will slow down and the lace will not crawl out of the tassel.
Straighten the threads around the lace and pull them across with another thread.
We put one end into the boot, and you can repeat the other tassel on the other end of the rope.
The boots are finished, you can try them on.
The boots can be any color and pattern of your choice. It all depends on imagination and desire.
Knitted shoes is now at the peak of popularity among children and youth. Especially when it comes to knitted boots. To keep your boots in shape, choose crochet.
Especially for Handicraft Lessons by Dina Kiseleva.
In the warm season you can often see on the streets crochet knitted boots. Thanks to large selection shoes of all kinds and models, buy knitted boots Nowadays you can find it in almost any shoe store or market. As a rule, this women's shoes is not particularly original, since all models either look the same or are not much different from each other. That's why fashionistas always keep track.
Knitted boots. Scheme
But if you are familiar with the knitting or crocheting technique, you can easily knit beautiful and original knitted boots. Scheme You can find knitting options for such shoes on the Internet, and you can choose the pattern for knitted boots that you like best.
Knitted summer boots
Another undeniable advantage of such shoes is that knitted summer boots do not require large material costs. All you need is knitting yarn and a crochet hook or knitting needles. If you are not a very experienced knitter, you can simplify your work. To do this, you will need a pair of old shoes (shoes can be with or without heels) or ballet shoes, which you just need to tie with threads. In this way, you will not only knit new, durable boots for yourself, but also solve the problem of old shoes that you probably won’t wear anymore and would be a pity to throw away.
For experienced needlewomen, knitting summer boots to order can be an additional way of earning money, because very often on the Internet you can see an advertisement “ I will buy knitted boots».
You can knit in several ways, and the frame can be hard or soft. The sole for such shoes can also be knitted with your own hands, or you can use the sole from an old shoe if it is in good condition.
There are several types of knitted boots: openwork boots for warm weather, glamorous stocking boots, thick winter boots or cozy house boots.
To crochet summer boots you will need: a crochet hook or knitting needles, strong yarn (it is better to choose linen, cotton or silk), the sole of an unnecessary pair of shoes, strong threads, an awl, a small skein of fishing line and glue.
Thanks to the fact that summer boots are knitted openwork pattern, they not only look beautiful, but are also convenient and comfortable in the warm season.
Crocheted boots. Scheme
First of all, you need to take measurements for future shoes by circling your foot on a piece of cardboard and measuring the height of the instep. This is especially true for those who want a tight-fitting fit crochet knitted boots. Scheme and the knitting patterns for such shoes are practically no different from knitting loose-fitting boots.
If you are knitting boots for the first time, it is better to spend a little time, study and prepare a template according to which you can make a boot pattern. This will make your future work easier, since you won’t have to unravel or re-tie anything.
If you do not have suitable soles for future knitted boots, you can purchase them from a store or shoe repair shop.
When choosing yarn, pay attention not only to its composition and quality, but also to the shade. Remember, white is the color and that's it light shades very easily soiled, so in order for your boots to look neat, you will have to wash them quite often, which can also affect their appearance. Of course, white boots look very elegant and beautiful, but if you wear them every day, they are unlikely to last you long.
The size of the hook and knitting needles should correspond to the density of the yarn, but in any case, for the summer version of such shoes, you should not choose a large hook.
To decide on the pattern and its density, you will need to knit a small fragment of the selected pattern and count required amount loop. The upper and lower parts of the boots are knitted separately and then joined together. To ensure reliable fastening of the parts, you need to add fishing line to the working thread. You also need to take into account that the top of the boots should be slightly larger than the circumference of the sole, otherwise folds may appear that will spoil appearance boots. To avoid such a mistake, take this point into account when creating a boot template. The finished shoes will look much more beautiful if you starch them.
Knitted boots: master class
For size thirty-eight boots you will need: one hundred grams of thick cotton yarn, a crochet hook and the sole of an unnecessary pair of shoes.
The knitting density of one star is seven and a half by seven and a half centimeters.
The side part of the boots is knitted in the following way: the first row is knitted with single crochets; in the second row, a single crochet is knitted above the column of the first row, an air loop is knitted above the second column of the first row, and a single crochet is knitted above the third column of the first row. In this way you need to knit until the end of the row.
To knit an asterisk you must first make a ring consisting of eight air loops. In the first row, eleven single crochets are knitted into a ring. In the second row, a double crochet is knitted over all the stitches of the first row, and three chain stitches are knitted between them. In the third row, three stitches are knitted into the first arch, five chain stitches and three stitches (the first stitch is knitted single crochet) twice into subsequent arches. Knit in this way until the end of the row, where you should have one arch left.
First you will need to knit individual stars, the number of which will determine the height of your boots. For example, for low boots, four stars are enough. To make the boot, the stars need to be connected together in a circle. After this, you can start knitting the top of the boots. To do this, you need to circle your foot on paper. You also need to measure the lift height. To make the boots neat and without wrinkles, the circumference of the sole should be two centimeters less than the top of the boots.
You will need one star for the top of the front part of the shoe, only for it in the third row you need to knit two single crochets and four chain stitches in all arches.
To knit a toe, use a chain four centimeters long. Knit a pattern on the sides of the shoes, evenly adding loops until the width of the fabric reaches fifteen centimeters. The toe of the boot should be seven centimeters long.
When you knit the last row, instead of the three central patterns, knit one chain stitch and two single crochets, then connect the toe to the star using two arches. When the height of the sides reaches six centimeters in the middle of every second row, the stars need to be connected to three arches. When you have three arches left, continue knitting straight, leaving four centimeters short of the heel. These four centimeters need to be knitted across. You need to connect the parts of the boot together using single crochets and double crochets. Finished boots will look better if they are starched.
Knitted boots with patterns
Those for whom knitted boots with patterns seems like a difficult task, they can try to knit original boots based on old shoes.
They are quite easy to make, and thanks to the hard heel, the appearance of such boots will not be spoiled by either long-term wear or regular washing.
To knit such light openwork boots you will need: ballet shoes (the color of the shoes should be selected in accordance with the color of the future boots), one hundred grams of yarn, a large needle and a hook.
First, you need to sew the ballet shoes in a circular pattern, and try to place the chain stitch (also called chain stitch) as close to the sole as possible. After this, you need to start with double crochets, which are knitted in the round into each of the chain stitch links. You need to tie the ballet shoes tightly so that they look completely tied with yarn. If necessary, you can add and subtract loops in certain places. In this way you will need to knit about eight rows. When you tie the toe and heel of ballet shoes, instead of double crochets, you will need to knit double crochets. After this, you will need to knit a pipe with an openwork pattern, which will be the top of the boot. The finished boot needs to be sewn to the knitted ballet shoe. The top of the boot can be decorated with a beautiful border, and to prevent the boots from slipping, the top of the border can be slightly narrowed. When the boots are ready, they need to be washed and made more rigid. To do this, after washing, soak the boots in a solution of water and PVA glue in a ratio of two to one.
Now you know that crochet knitted boots with patterns Anyone can tie it and it can be done quite quickly.
They look no less beautiful and stylish knitted boots. Knitting such cozy and comfortable shoes is easy. Of course, boots knitted, will be warmer than crocheted boots, but they will perfectly warm your feet in cool weather.
In order to knit original and beautiful boots for yourself, you will need: a pair of old shoes, yarn of any color, knitting needles, a hook, a large needle, a sheet of cardboard, and an awl.
Before you start knitting boots, you will need to prepare your shoes. To do this, you need to remove all buckles, tongues, bows or other decorative elements on them. This is necessary so that later unsightly bulges do not appear under the knitted fabric and unattractive folds do not appear.
After this, you will need an awl, which you need to make holes on the shoes as close to the sole as possible. The holes should be located at the same distance from each other, because stitches will be made along them in order to sew on the bottom of the boot. After finishing preparatory work You can start knitting directly. First you need to knit the bottom part of the product. To knit better pattern“stocking stitch”, that is, with facial loops. You need to start knitting from the sock. While working, it is advisable to frequently check the size by applying the knitting to the shoes. After you finish knitting the base, it must be sewn to the already made stitches at the base of the shoes. To hide the junction of the parts at the bottom of the boot, tie a neat narrow lace.
Next, you can start knitting the boot, the length of which can be very different. It is knitted in the same way as an ordinary sock. It's best to start with an elastic band, leaving two holes in which you can place pompoms if you planned to make them. When you tie the product to the heel, all the loops need to be closed, and then knit the toe on one knitting needle. That's all, the knitted boots are ready, sew them to the shoes and try them on!
The style and design of knitted boots can be varied. For example, you can decorate such shoes beautiful pompoms, original buckles or buttons. This is necessary so that your boots not only look stylish, but also match the rest of your wardrobe.
An excellent option for those who value warmth and comfort house shoes maybe knitted boots. To knit these boots you don't need old shoes or soles. House boots are knitted in the same way as socks, and insoles can be used to add extra thickness to the sole.
For example, crocheted boots with felt soles look very cute.
To ready product It turned out soft and warm, you need to knit it from thick fluffy threads.
For such a product you will need: a skein of thread, a hook and insoles.
First you need to stitch the insole in a circle. After this, you need to knit the upper part with single crochets, the size of which corresponds to the size of the insole. Top part and the insole are fastened together with a hook. Then you need to tie the back and sides of the insoles and connect them to the upper part. Next, you need to knit in the round, reducing the number of stitches so that the boots are slightly narrower at the top. Continue knitting until your boots reach the desired height. Your home boots are ready! If you want, you can decorate them by sewing a few buttons on the sides. Buttons can also be decorated by first tying them with the same yarn from which the boots are knitted.
If you liked our site, express your "thank you"
by clicking on the buttons below.
Nowadays, boots are an integral part women's wardrobe. For winter cold, there are warm leather models with fur and textured soles. Autumn models save female legs from getting wet, but summer boots become simply a beautiful and stylish accessory.
When did boots appear? According to archaeological data, the appearance of shoes dates back to approximately 25 - 30 thousand years ago in North America. There are also a few samples discovered later on the territory of ancient Egypt and Africa.
In those days, shoes were highly dependent on climatic conditions. In hot countries, the Greeks, Romans and Egyptians of ancient times wore mainly sandals, while the northern peoples preferred warm leather shoes and boots.
The Scythians preferred soft, narrow and tall leather boots, into which the pants were tucked. They resembled stockings and were attached to the leg with special straps. Such products were decorated with embroidery and fur. At that time, both women and men wore boots, and female models They had short tops and were made of red leather. This color was considered the most beautiful. They were often embroidered with ornamental patterns.
In Europe, boots were first mentioned in the 15th century. They served mainly men's shoes riding. They were very long, above the model's hips. During the time of the French king Louis XIV, boots with square toes were very popular. high heels and spurs. In the middle of the 18th century, bright and pointed models became fashionable. By the 19th century, it was gradually replaced by the popularity of low shoes trimmed with fur.
Like many other things, boots at the very beginning were an indicator of a person’s social level and level of wealth. For example, in Rus' only the upper classes sported morocco boots, while among ordinary people there were bast shoes and pistons on the legs. During the reign of Peter I, the popularity of boots became much less popular, but by the end of the 19th - beginning of the 20th centuries, almost all men in Russia wore boots. The women's version had a shortened shaft and a red morocco or cloth trim. The 20th century was also marked by the creation of an asymmetrical insole that followed the contours of the foot; before that, shoes were not divided into right and left boots.
Now you can find a model for every taste, from the most different materials, with heels, wedges or flat soles. Like any accessory that influences the entire look, boots self made will always be out of competition. One of the varieties of such products will be crocheted boots.
In this article we will offer several options for boot models, crocheted. They will all have one thing in common - a finished sole. And then there are possible options.
The first one is to give a second life to old shoes. It is quite possible that you have a pair of shoes, boots or even ballet flats lying around, the tops of which are damaged. It may have been stained, torn, or simply worn out, but this pair has a very comfortable last. Then your new boots will not rub your feet under any circumstances and will become excellent new ones, beautiful accessory in wardrobe.
The second option is a new sole. There is also room for creative activity and fantasies of needlewomen. For example, you can do the knitted part and then take the boots to a shoe repair shop and have a specialist attach the soles. Another option would be to purchase comfortable slippers, perhaps even domestic ones, and turning them into beautiful boots. Typically, such shoes have a comfortable, soft and very often rubberized sole. Boots with this base will perfectly withstand bad street weather.
The next step is to select threads. Everything will depend on what season you will knit boots for. If you want to make thick boots for fall or spring, use a yarn made from a mixture of wool and acrylic. There should be more of the latter; it is due to the artificial acrylic component that the product will be non-prickly, pleasant to wear and durable. For summer models choose cotton or mixed threads with the addition of acrylic and viscose. Lightweight and breathable, these threads are perfect for warm weather, and your feet will feel comfortable in them.
Crochet boots
Option 1
You will need:
- Yarn 80% acrylic, 20% wool (in this master class, black and yellow, but you, of course, can choose other colors) 135 m / 50 g;
- Yarn "grass" yellow color;
- Hook No. 3;
- Slippers with comfortable soles without back;
- Awl.
We will knit with a thread in two folds. The fabric part of the slipper's nose must be cut off, leaving the very tip. We don’t throw it away; it will come in handy later.
Now you need to use an awl to make holes at equal distances around the perimeter of the slipper. We pierce the side with an awl so as to capture part of the rubberized sole and insole. Now you need to make stitches with black yarn, as in the photo. We fasten the thread, but do not tear it off.
We knit 1 row with connecting posts. The number of loops in each stitch will depend on the width of the stitch and the thickness of the yarn.
We knit the next row st. s/n yellow threads.
To do this, you will need a fabric part that was cut off earlier. On paper you need to make a pattern for the nose using the dimensions of the cut out part.
Using them we calculate the loops and knit the spout st. s/n.
Advice! Record all your actions and calculations performed. This will help when knitting the second boot.
Now you need to sew or tie the s.s. spout to harness. Try on the product; you may need to adjust the number of loops.
The next stage is knitting the heel. We fulfill Art. s/n. We attach to the sides of the spout using s.s. You will need approximately 2-3 rows.
According to the pattern below, we knit the bootleg.
First r. 3 v.p.p. 1 ch, 3 tbsp. s/n in the same base loop, * ch 1, skip 3 loops, 1 tbsp. b/n, ch 1, skip 3 loops, knit in the 4th stitch (3 st. s/n, 1 ch., 3 st. s/n)*, continue from *, finish row 2 sts . s/n in the first loop and 2 s.s.
Second r. 1 vp, *3 vp, now we knit 3 tbsp. s/n with a common base and top in st. b/n first row, again 3 vp, 1 tbsp. b/n in 1 v.p. between triplets st. s/n from one base*. We continue from *, ending with 1 s.s.
We knit all subsequent odd rows like the first, even ones like the second. The pattern will be in a checkerboard pattern, shifting every two rows.
The length of the boot is individual. We knit the last two rows of the pattern with a contrasting thread.
Then we tie two rows of art. s/n yarn of the second color. Now you need to tie it with “grass” yarn. For this, you can take a hook of a larger number.
Now we knit a decorative strap with yellow thread. First row st. b/n. second row st. s/n and third row st. b/n. The length will depend on the circumference of the ankle. Now you need to knit the chain v.p. black yarn the same length as the strap, and insert it between st. s/n.
Sew on the strap. We decorate the outside with a button. All that remains is to knit a pair of boots.
Option 2
For those who prefer refined and elegant simplicity, we offer the following options.
The principle of attaching to the sole and knitting is the same. You can use different colors as decoration by tying the boot tops with stripes or decorating them with flowers.
Option 3
Crochet boots with scales pattern
This knitting option is also called “crocodile skin”. Not a single animal will be harmed, and you will become the owner of boots made of “crocodile skin”.
In this model, it will be necessary to attach the sole after knitting, since here we also make the insole using a hook. Of course, you can take the finished sole and perform the manipulations described above for tying it. Then knit according to the spout pattern suggested below. Try it, experiment.
We start knitting from the sole. The work will take place in a circle (or rather an oval, but the principle is the same). In order to calculate the number of chain stitches in a cast-on row, you need to measure the length of the foot and its width. Now we subtract the second from the first value. The resulting number* will be the length of the initial chain. We knit a sample of 10 x 10 cm and calculate the number of loops* in one centimeter. We multiply two numbers with * and get the number of loops in the cast-on row.
So, a chain of v.p. dialed.
First r. 3 v.p.p. and another 5 tbsp. s/n into the same base loop. Now we knit st. s/n. in the last loop we knit 6 tbsp. s/n and move on to knitting on the second side of the cast-on row. We finish 1 s.s. in the 3rd v.p.p.
Second r. 3 v.p.p. + 1 tbsp. s/n in the same loop, in the next five loops we knit 2 tbsp. s/n with a common basis, then 1 tbsp. s/n. In 6 tbsp. s/n knitted from a common base we knit 2 tbsp. s/n. On the second side of the oval we continue to knit st. s/n. We finish 1 s.s. in the 3rd v.p.p.
Third r. We already have a small oval. The narrow sides consist of two st. s/n, knitted from one base, 12 loops from each edge. We knit 2 tbsp into these loops. s/n with a common base, alternating with 1 tbsp. s/n. This makes 18 loops. Next we knit 1 tbsp. s/n on the wide sides.
In the fourth row along the edges on 18 loops we knit 2 tbsp. s/n with a common base, alternating with 2 tbsp. s/n. This makes 24 loops. We knit the wide sides as usual, without any increases.
The size of the sole is determined individually. You can make a drawing of the foot and periodically try on the work.
When the sole is finished, continue knitting the toe and heel without tearing off the thread. Thanks to the elastic pattern of embossed columns, the finished boot will fit snugly on the foot.
Below is an approximate knitting pattern. The pattern will be preserved, only the number of loops in the rows will change.
We knit one (first) row with simple stitches. s/n without increases.
Second r. we knit in a circle with relief purl (concave) stitches. s/n. Please note that in the diagram the wider rows are the heel and toe.
Third r. We knit alternating convex and concave columns. It turns out an elastic band 1 x 1. Follow the diagram. Try on the boot periodically to adjust the number of eyelets.
To move on to knitting the boot, you need to knit 1-2 rows of simple stitches. s/n.
We begin to knit the boot with a “scales” pattern. The work is done in a circle. Below is the diagram.
First r. 3 v.p.p. + 1 tbsp. s/n in the same loop, * 2 ch, skip 2 loops, 2 tbsp. s/n with a common basis *, continue from *.
Second r. we knit in the opposite direction, using the bodies of double crochets as a base. 3 vp, 4 tbsp. s/n (insert a hook between two stitches s/n and the right column serves as the base) + 1 ch. + 5 tbsp. s/n (we insert a hook between two stitches, s/n, and the left column serves as the base). For convenience, we turn the knitting upside down. Every first 2 tbsp. s/n with a common base serve as an arch for (5 treble s/n + 1 vp + 5 treble s/n). Every second 2 tbsp. We do not knit s/n with a common base; when transitioning between scales, we perform 1 ch.
Third r. Turn the knitting back over. We knit similarly to the first row. Fourth r. we knit “scales” in a checkerboard pattern relative to the second row.
The height of the boot will depend only on your desire. The last row is performed st. b/n.
As an additional decoration, you can sew a button along the outer edge.
Option 4
Crochet boots with funny pom-poms
We also make this model with a knitted sole.
You will need:
- Thin and thick acrylic yarn;
- Hooks No. 4,5 and No. 5.
The sole is knitted similarly to the previous model. You can choose any other oval pattern on the Internet.
We knit the last row without increasing st. b/n.
We knit the upper part not from bottom to top, but along one long and narrow fabric. Using hook No. 5 we make a chain of 17 chain stitches. thread in two layers (thick + thin). We knit in return rows with crochet number 4.5 half-stitch. s/n for the back half-loop. When the length of the fabric reaches the circumference of the leg (this is approximately 30 rows), we finish knitting. We connect the resulting ribbon into a ring. We fasten the thread, cut it and hide it.
We will knit the boot from the top of the boot, securing the loops of the first row into the side stitches. s/n, they act as a typesetting row. We knit in return rows.
First r. knit, alternating 2 tbsp. s/n in 1 side half-stitch. s/n and 1 tbsp. s/n in 1 side half-stitch. s/n.
We perform the second, third and fourth rows with relief stitches. s/n.
Starting from the fifth row, we narrow the shaft. To do this, select 4 symmetrical loops at an equal distance from each other. We knit this row st. s/n, in the marked loop we perform 2 tbsp. s/n with a common vertex. We knit behind the back wall.
From the 6th to the 9th rows we knit with relief stitches. s/n.
10th r. We knit similarly to the 5th, decreasing four loops at an equal distance.
We perform the 11th and 12th rows with relief stitches. s/n.
We begin to knit the instep of the boot.
The beginning of the 13th row is the central point of the future heel. We select the opposite central point of the future nose. We also mark the loop before and after it. Now we knit st. b/n to the loop in front of the middle loop of the spout. Here we knit 10 ch. and knit 3 vp in them. and then a row of st. s/n.
We now have a branch for the spout.
We fasten this strip from Art. s/n on the boot in the loop located after the third marked one. We knit further st. b/n. We finish 1 s.s.
We will perform the following rows in a circle st. s/n.
14th r. At 3 v.p.p. we knit branches for the spout 5 tbsp. s/n. we finish row 1 s.s. in the 3rd v.p.p.
15th r. performed similarly to the 14th, in 5 tbsp. s/n, knitted in an arch of 3 ch. nose, we knit 2 tbsp. s/n with a common basis. Now the width of the spout is already 10 loops.
We knit the 16th and 17th rows without increasing st. s/n.
We turn the work and knit the 18th row of half stitches. s/n. fasten the thread.
Now you need to connect the parts using 1 row of s.s. The line will be embossed.
The seam of the connection of the upper part of the boot (it is located across the rest of the knitting) is located at the back. It is necessary to knit a chain of vp with a thread in two folds. approximately 1 meter long. Mark its center and secure it to this seam.
Attach 1 pompom to each end.
How to make pom poms
To create pompoms you will need two cardboard circles. They need to cut out the central round part and a small piece along the radius.
Fold the circles so that all the cut out parts match. Now we begin to wind the thread without breaking away from the ball. The larger and tighter the winding, the fluffier and more magnificent the pompom will turn out. When you consider the number of turns sufficient, you need to use scissors to cut the wound threads along the circle. Now you need to slightly separate one cardboard from the other and place a piece of thread in the resulting hole. Now we tie it around a bunch of threads, straighten the cut ends and remove the cardboards. Shake and get a cute pompom.
We attach them to the ends of the chains and tie them beautifully, making several turns around the leg.
This post presents different types knitted boots with knitting descriptions, knitting patterns and patterns. Knitted products these are popular and loved, especially by young girls. Knitting boots captivates many people! Such beautiful shoes can't help but like it!)
Reds knitted boots The photos are amazingly good! Knitted boots richly decorated with bright crocheted flowers! Very beautiful shoes!) Women's boots are wonderful! Knitted boots are pleasing with their appearance!) Knitting is amazing!)
Knitted boots with embroidery with a description of knitting and knitting patterns. Knitted boots look luxurious! Knitting boots requires skill! Children's shoes are the best!)
The blue crocheted boots are very cute. Here detailed description knitting boots. Knitted boots are cozy and beautiful! Knitting boots is fun! Comfortable shoes many people like it.
White and blue knitted boots with knitting needles with a knitting description and pattern. Knitted boots are good!)
Elegant children's boots with a description of knitting.
How beautiful these blue knitted boots with flowers look in the photo!)
Unusual boots and very cute with a description of knitting. The crocheted boots are very interesting. Many people will like these women's boots.
Short boots are crocheted, here is a description of knitting, knitting patterns and a boot pattern
Openwork knitted boots with a knitting pattern, knitting description and boot pattern. Openwork knitted boots look so wonderful with evening dress. It's a matter of taste and many people like to wear openwork knitted boots with heels. These women's boots are very popular.
The photo shows white boots with heels. Knitted openwork heeled boots and so elegant, you can’t take your eyes off them!)) These boots should be washed in warm water as carefully as possible, and dried by placing them on a flat surface so that the boots retain their shape.
Knitted black boots with heels are so wonderful!)
Blue boots with description and knitting pattern.
Fashionable knitted boots with a lowered top are so comfortable and elegant, very cute!)
Bright boots with a pattern, knitting description and knitting patterns. Knitted boots look luxurious!) Very elegant women's boots.
These yellow boots are crocheted.
Summer boots with knitting description and knitting pattern.
In the photo there are openwork boots in a pleasant blue color!
Light knitted boots are knitted with a beautiful relief pattern. Description of knitting available.
Gray boots are crocheted and decorated with flowers.
Knitted lace boots are just right for ballerinas!)
Brown knitted boots with knitting patterns.
The photo shows comfortable and beautiful knitted felt boots, they are decorated with flowers and butterflies. Shoes for girls, boys don't need them!)) The decor of the boots is very cute!)
Knitted boots with knitting description, knitting pattern and boot pattern.
The lilac openwork boots in the picture are so cute!)
These warm knitted boots look very beautiful! The top is knitted with a braid pattern.
The crocheted boots are very cute. They lilac color with floral motifs! Like the pictures! I want to wear them!)
The photo shows white knitted boots. The boots are very cute!)
These white knitted boots with flowers are a delight with their rich decor and beauty! The boots are richly decorated with knitted roses, which gives them charm and charm!)) The decor is good!)
Elegant knitted boots white The picture is absolutely charming! How wonderful the boots look on your feet! Beauty!))
In knitted boots of a pleasant lemon color it is so pleasant to run through the green grass.) The boots are knitted with a relief pattern.
Red openwork boots with flowers are as wonderful as the picture!) I would look and look at these knitted boots!))
The yellow knitted boots are very pretty and elegant.)
Red knitted boots with a pattern. Here are the boots with the knitting pattern.
On this photo warm boots With relief patterns and with buttons. Very stylish and beautiful knitted boots!)
These adorable striped boots are super cozy! It’s comfortable to walk in the morning dew!)) The boots are amazing!)
The photo shows green openwork boots. Fashionable and beautiful boots look wonderful!)
Crocheted slippers are best made with soles or insoles. The insole can be felt, leather, fur. You can cut the sole from the top of an old boot.
House slippers are crocheted from individual hexagonal motifs. It is advisable to take the insole a size larger. If it is uncomfortable with a simple insole, buy an orthopedic one.
To work you will need:
- Cotton yarn "Violet" type - 150 grams.
- Hook 3 mm.
- Insoles.
- Scissors.
- An awl or thick needle.
The yarn needs to be joined in two threads, and if the yarn is thin - in three. The knitting should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we first pierce with an awl, stepping back 0.5 cm from the edge. The distance between the holes is 0.5 cm.
When tying, we use single crochets, two in each hole. Then you need to measure the length of the knitted insole around the perimeter in order to subsequently calculate the length of the motif.
A prerequisite is that the length of the side of the motif, multiplied by 8, must be equal to the length of the insole along the perimeter (if necessary, you can change the pattern by removing or adding rows to it).
We collect slippers. To do this, we take three ready-made motifs and sew them according to the following pattern: we sew the sides marked with the number 1 with one front seam. We sew the sides marked with the number 2 to create a back seam. In the future we will sew the sides numbered 3 to the insole. The sides marked with the number 4 are left unsewn.
You can crochet the motifs from the outside, or use a needle and sew them from the inside - whichever is more convenient for you.
It should work like this:
Pin or baste the parts together with the insole, moving the nose to the right or left of the central part. This will create a right and left slipper. We tie our sneaker to the insole. The result was comfortable slippers.
For these colorful slippers it is better to take felt sole. If desired, you can replace them with ones cut out of leatherette or fur.
To work you will need:
- Yarn-wool or wool with acrylic - 150 grams.
- Hook 3.5 mm.
- Felt insoles.
We start knitting from the sock. The pattern can be anything, the main thing is that it is convenient for adding. We knit with a double crochet pattern. We make additions up to the little finger, that is, 4-5 cm.
At the instep level, we move to the sides and start knitting like this.
This is how the canvas turns out. It looks like the letter P. The length is determined by applying it to the foot or insole.
This is the knitting pattern for the beginning of the slipper.
Sew the back seam. We do this without breaking the thread, from the bottom up, using single crochets.
We continue to knit in circles. The height of the sneaker depends on your desire.
We attach the top to the sole and secure it with pins to make sewing easier.
We sew the top to the sole using an “over the edge” seam. It's better to take a stronger thread.
These comfortable, warm slippers are suitable for both children and adults. This model has a knitted and leather sole. To work, you need wool yarn (you can use leftovers) and a small hook. The diagram is given for foot sizes 37-38. If you need a different size, decrease or add the quantity air loops. We cast on 22 air loops and knit a trail according to the pattern:
For one sneaker we need two knitted footprints. Below is a footprint for children's slippers; for them, cast on 18 air loops (given for comparison).
To begin with, we take one trace and begin to knit a slipper from a series of concave relief posts.
This is what should happen.
View from the back.
We start making decreases from the third row.
We make decreases like this: 3rd, 4th, 6th and 8th rows - decreases on the central five columns. We knit the 1st, 3rd and 5th convex columns together as unfinished ones, skip the 2nd and 4th.
5th and 7th rows - on the central nine stitches we make decreases, knitting the 1st, 3rd, 5th, 7th and 9th convex stitches together, like unfinished stitches. We skip the 2nd, 4th, 6th and 8th.
We knit the second slipper like the first.
We cut out a sole from a piece of leather, slightly smaller than the footprint. We sew the sole on a machine. If you don’t have a machine, you can do it manually.
We attach the blank to the slipper and sew it on.
