In the warm season you can often see on the streets knitted boots crochet Thanks to large selection shoes of all kinds and models, knitted boots can be bought nowadays in almost any shoe store or market. As a rule, this women's shoes is not particularly original, since all models either look the same or are not much different from each other. That's why fashionistas always keep track of the latest fashion trends.
Knitted boots
But if you are familiar with knitting or crocheting techniques, you can easily knit beautiful and original knitted boots for yourself. Knitting patterns for such shoes can be found on the Internet, and the pattern for knitted boots can be chosen the one you like best.
Knitted summer boots
Another undeniable advantage of such shoes is that knitted summer boots do not require large material costs. All you need is knitting yarn and a crochet hook or knitting needles. If you are not a very experienced knitter, you can simplify your work. To do this, you will need a pair of old shoes (shoes can be with or without heels) or ballet shoes, which you just need to tie with threads. In this way, you will not only knit new, durable boots for yourself, but also solve the problem of old shoes that you probably won’t wear anymore and would be a pity to throw away.
For experienced needlewomen, crocheting or knitting summer boots to order can be an additional way of earning money, because very often on the Internet you can see the ad “I will buy knitted boots.”
Fashionable women's boots can be knitted in several ways, and the frame can be hard or soft. The sole for such shoes can also be knitted with your own hands, or you can use the sole from an old shoe if it is in good condition.
There are several types of knitted boots: openwork boots for warm weather, glamorous stocking boots, thick winter boots or cozy house boots.
To crochet summer boots you will need: a crochet hook or knitting needles, strong yarn (it is better to choose linen, cotton or silk), the sole of an unnecessary pair of shoes, strong threads, an awl, a small skein of fishing line and glue.
Thanks to the fact that summer boots are knitted openwork pattern, they not only look beautiful, but are also convenient and comfortable in the warm season.
Crochet boots
First of all, you need to take measurements for future shoes by circling your foot on a piece of cardboard and measuring the height of the instep. This is especially true for those who want tight-fitting crochet boots. The patterns and patterns for knitting such shoes are practically no different from knitting loose-fitting boots.
If you are knitting boots for the first time, it is better to spend a little time, study and prepare a template according to which you can make a boot pattern. This will make your future work easier, since you won’t have to unravel or re-tie anything.
If you do not have suitable soles for future knitted boots, you can purchase them from a store or shoe repair shop.
When choosing yarn, pay attention not only to its composition and quality, but also to the shade. Remember, white is the color and that's it light shades very easily soiled, so in order for your boots to look neat, you will have to wash them quite often, which can also affect their appearance. Of course, white boots look very elegant and beautiful, but if you wear them every day, they are unlikely to last you long. The size of the hook and knitting needles should correspond to the density of the yarn, but in any case, for the summer version of such shoes, you should not choose a large hook.
To decide on the pattern and its density, you will need to knit a small fragment of the selected pattern and count required amount loop. The upper and lower parts of the boots are knitted separately and then joined together. To ensure reliable fastening of the parts, you need to add fishing line to the working thread. It also needs to be taken into account that top part boots should be slightly larger than the circumference of the sole, otherwise folds may appear that will ruin appearance boots. To avoid such a mistake, take this point into account when creating a boot template. The finished shoes will look much more beautiful if you starch them.
Knitted boots: master class
For size thirty-eight boots you will need: one hundred grams of thick cotton yarn, a crochet hook and the sole of an unnecessary pair of shoes.
The knitting density of one star is seven and a half by seven and a half centimeters.
The side part of the boots is knitted in the following way: the first row is knitted with single crochets; in the second row, a single crochet is knitted above the column of the first row, and over the second column of the first row - air loop, above the third column of the first row is a single crochet. In this way you need to knit until the end of the row.
To knit an asterisk you must first make a ring consisting of eight air loops. In the first row, eleven single crochets are knitted into a ring. In the second row, a double crochet is knitted over all the stitches of the first row, and three chain stitches are knitted between them. In the third row, three stitches are knitted into the first arch, five chain stitches and three stitches (the first stitch is knitted single crochet) twice into subsequent arches. Knit in this way until the end of the row, where you should have one arch left.
First you will need to knit individual stars, the number of which will determine the height of your boots. For example, for low boots, four stars are enough. To make the boot, the stars need to be connected together in a circle. After this, you can start knitting the top of the boots. To do this, you need to circle your foot on paper. You also need to measure the lift height. To make the boots neat and without wrinkles, the circumference of the sole should be two centimeters less than the top of the boots.
You will need one star for the top of the front part of the shoe, only for it in the third row you need to knit two single crochets and four chain stitches in all arches.
To knit a toe, use a chain four centimeters long. Knit a pattern on the sides of the shoes, evenly adding loops until the width of the fabric reaches fifteen centimeters. The toe of the boot should be seven centimeters long.
When you knit the last row, instead of the three central patterns, knit one chain stitch and two single crochets, then connect the toe to the star using two arches. When the height of the sides reaches six centimeters in the middle of every second row, the stars need to be connected to three arches. When you have three arches left, continue knitting straight, leaving four centimeters short of the heel. These four centimeters need to be knitted across. You need to connect the parts of the boot together using single crochets and double crochets. Finished boots will look better if they are starched.
Those for whom knitted boots with patterns seem like a difficult task can try knitting original boots based on old shoes.
They are quite easy to make, and thanks to the hard sole, the appearance of such boots will not be spoiled by either long-term wear or regular washing.
To knit such light openwork boots you will need: ballet flats or slip-ons rubber sole(the color of the shoes should be selected in accordance with the color of the future boots), one hundred grams of yarn, a large needle and a hook.
First, you need to sheathe the base - the shoes - in a circular pattern, and try to place the chain stitch (also called a chain stitch) as close to the sole as possible. After this, you need to start crocheting with double crochets, which are knitted in the round into each of the chain stitch links. You need to tie the warp tightly so that it looks completely tied with yarn. If necessary, you can add and subtract loops in certain places. In this way you will need to knit about eight rows.
When you knit the toe and heel of the warp, instead of double crochets, you will need to knit double crochets. After this, you will need to knit a pipe with an openwork pattern, which will be the top of the boot. The finished boot needs to be sewn to the tied shoes. The top of the boot can be decorated with a beautiful border, and to prevent the boots from slipping, the top of the border can be slightly narrowed. When the boots are ready, they need to be washed and made more rigid. To do this, after washing, soak the boots in a solution of water and PVA glue in a ratio of two to one.
Detailed master class: How to crochet boots from square motifs
Master Class: Boots crocheted The boot is corrugated
This post presents different types knitted boots with knitting descriptions, knitting patterns and patterns. Knitted products these are popular and loved, especially by young girls. Knitting boots captivates many people! Such beautiful shoes can't help but like it!)
The red knitted boots in the photo are so wonderful! Knitted boots are richly decorated with bright crocheted flowers! Very beautiful shoes!) Women's boots are wonderful! Knitted boots are pleasing with their appearance!) Knitting is amazing!)
Knitted boots with embroidery with a description of knitting and knitting patterns. Knitted boots look luxurious! Knitting boots requires skill! Children's shoes are the best!)
The blue crocheted boots are very cute. Here detailed description knitting boots. Knitted boots are cozy and beautiful! Knitting boots is fun! Comfortable shoes many people like it.
White and blue knitted boots with knitting needles with a knitting description and pattern. Knitted boots are good!)
Elegant children's boots with a description of knitting.
How beautiful these blue knitted boots with flowers look in the photo!)
Unusual boots and very cute with a description of knitting. The crocheted boots are very interesting. Many people will like these women's boots.
Short boots are crocheted, here is a description of knitting, knitting patterns and a boot pattern
Openwork knitted boots with a knitting pattern, knitting description and boot pattern. Openwork knitted boots look so wonderful with evening dress. It's a matter of taste and many people like to wear openwork knitted boots with heels. These women's boots are very popular.
The photo shows white boots with heels. Knitted openwork heeled boots and so elegant, you can’t take your eyes off them!)) These boots should be washed in warm water as carefully as possible, and dried by placing them on a flat surface so that the boots retain their shape.
Knitted black boots with heels are so wonderful!)
Blue boots with description and knitting pattern.
Fashionable knitted boots with a lowered top are so comfortable and elegant, very cute!)
Bright boots with a pattern, knitting description and knitting patterns. Knitted boots look luxurious!) Very elegant women's boots.
These yellow boots are crocheted.
Summer boots with knitting description and knitting pattern.
In the photo there are openwork boots in a pleasant blue color!
Light knitted boots are knitted with a beautiful relief pattern. Description of knitting available.
Gray boots are crocheted and decorated with flowers.
Knitted lace boots are just right for ballerinas!)
Brown knitted boots with knitting patterns.
The photo shows comfortable and beautiful knitted felt boots, they are decorated with flowers and butterflies. Shoes for girls, boys don't need them!)) The decor of the boots is very cute!)
Knitted boots with knitting description, knitting pattern and boot pattern.
The lilac openwork boots in the picture are so cute!)
These warm knitted boots look very beautiful! The top is knitted with a braid pattern.
The crocheted boots are very cute. They lilac color with floral motifs! Like the pictures! I want to wear them!)
The photo shows white knitted boots. The boots are very cute!)
These white knitted boots with flowers will delight you with their rich decor and beauty! The boots are richly decorated with knitted roses, which gives them charm and charm!)) The decor is good!)
Elegant knitted boots white The picture is absolutely charming! How wonderful the boots look on your feet! Beauty!))
In knitted boots of a pleasant lemon color it is so pleasant to run through the green grass.) The boots are knitted with a relief pattern.
Red openwork boots with flowers are as wonderful as the picture!) I would look and look at these knitted boots!))
The yellow knitted boots are very pretty and elegant.)
Red knitted boots with a pattern. Here are the boots with the knitting pattern.
On this photo warm boots With relief patterns and with buttons. Very stylish and beautiful knitted boots!)
These adorable striped boots are super cozy! It’s comfortable to walk in the morning dew!)) The boots are amazing!)
The photo shows green openwork boots. Fashionable and beautiful boots look wonderful!)
Nowadays, boots are an integral part women's wardrobe. For winter cold, there are warm leather models with fur and textured soles. Autumn models save female legs from getting wet, but summer boots become simply a beautiful and stylish accessory.
When did boots appear? According to archaeological data, the appearance of shoes dates back to approximately 25 - 30 thousand years ago in North America. There are also a few samples discovered later on the territory of ancient Egypt and Africa.
In those days, shoes were highly dependent on climatic conditions. In hot countries, the Greeks, Romans and Egyptians of ancient times wore mainly sandals, while the northern peoples preferred warm leather shoes and boots.
The Scythians preferred soft, narrow and tall leather boots, into which the pants were tucked. They resembled stockings and were attached to the leg with special straps. Such products were decorated with embroidery and fur. At that time, both women and men wore boots, and female models They had short tops and were made of red leather. This color was considered the most beautiful. They were often embroidered with ornamental patterns.
In Europe, boots were first mentioned in the 15th century. They served mainly men's shoes riding. They were very long, above the model's hips. During the time of the French king Louis XIV, boots with square toes were very popular. high heels and spurs. In the middle of the 18th century, bright and pointed models became fashionable. By the 19th century, it was gradually replaced by the popularity of low shoes trimmed with fur.
Like many other things, boots at the very beginning were an indicator of a person’s social level and level of wealth. For example, in Rus' only the upper classes sported morocco boots, while among ordinary people there were bast shoes and pistons on the legs. During the reign of Peter I, the popularity of boots became much less popular, but by the end of the 19th - beginning of the 20th centuries, almost all men in Russia wore boots. The women's version had a shortened shaft and a red morocco or cloth trim. The 20th century was also marked by the creation of an asymmetrical insole that followed the contours of the foot; before that, shoes were not divided into right and left boots.
Now you can find a model for every taste, from the most different materials, with heels, wedges or flat soles. Like any accessory that influences the entire look, handmade boots will always be beyond competition. One of the varieties of such products will be boots, crocheted.
In this article we will offer several options for crocheted boot models. They will all have one thing in common - a finished sole. And then there are possible options.
The first one is to give a second life to old shoes. It is quite possible that you have a pair of shoes, boots or even ballet flats lying around, the tops of which are damaged. It may have been stained, torn, or simply worn out, but this pair has a very comfortable last. Then your new boots will not rub your feet under any circumstances and will become excellent new ones, beautiful accessory in wardrobe.
The second option is a new sole. There is also room for creative activity and fantasies of needlewomen. For example, you can do the knitted part and then take the boots to a shoe repair shop and have a specialist attach the soles. Another option would be to purchase comfortable slippers, perhaps even domestic ones, and turning them into beautiful boots. Typically, such shoes have a comfortable, soft and very often rubberized sole. Boots with this base will perfectly withstand bad street weather.
The next step is to select threads. Everything will depend on what season you will knit boots for. If you want to make thick boots for fall or spring, use a yarn made from a mixture of wool and acrylic. There should be more of the latter; it is due to the artificial acrylic component that the product will be non-prickly, pleasant to wear and durable. For summer models choose cotton or mixed threads with the addition of acrylic and viscose. Lightweight and breathable, these threads are perfect for warm weather, and your feet will feel comfortable in them.
Crochet boots
Option 1
You will need:
- Yarn 80% acrylic, 20% wool (in this master class, black and yellow, but you, of course, can choose other colors) 135 m / 50 g;
- Yarn "grass" yellow color;
- Hook No. 3;
- Slippers with comfortable soles without back;
- Awl.
We will knit with a thread in two folds. The fabric part of the slipper's nose must be cut off, leaving the very tip. We don’t throw it away; it will come in handy later.
Now you need to use an awl to make holes at equal distances around the perimeter of the slipper. We pierce the side with an awl so as to capture part of the rubberized sole and insole. Now you need to make stitches with black yarn, as in the photo. We fasten the thread, but do not tear it off.
We knit 1 row with connecting posts. The number of loops in each stitch will depend on the width of the stitch and the thickness of the yarn.
We knit the next row st. s/n yellow threads.
To do this, you will need a fabric part that was cut off earlier. On paper you need to make a pattern for the nose using the dimensions of the cut out part.
Using them we calculate the loops and knit the spout st. s/n.
Advice! Record all your actions and calculations performed. This will help when knitting the second boot.
Now you need to sew or tie the s.s. spout to harness. Try on the product; you may need to adjust the number of loops.
The next stage is knitting the heel. We fulfill Art. s/n. We attach to the sides of the spout using s.s. You will need approximately 2-3 rows.
According to the pattern below we knit the bootleg.
First r. 3 v.p.p. 1 ch, 3 tbsp. s/n in the same base loop, * ch 1, skip 3 loops, 1 tbsp. b/n, ch 1, skip 3 loops, knit in the 4th stitch (3 st. s/n, 1 ch., 3 st. s/n)*, continue from *, finish row 2 sts . s/n in the first loop and 2 s.s.
Second r. 1 vp, *3 vp, now we knit 3 tbsp. s/n with a common base and top in st. b/n first row, again 3 vp, 1 tbsp. b/n in 1 v.p. between triplets st. s/n from one base*. We continue from *, ending with 1 s.s.
We knit all subsequent odd rows like the first, even ones like the second. The pattern will be in a checkerboard pattern, shifting every two rows.
The length of the boot is individual. We knit the last two rows of the pattern with a contrasting thread.
Then we tie two rows of art. s/n yarn of the second color. Now you need to tie it with “grass” yarn. For this, you can take a hook of a larger number.
Now we knit a decorative strap with yellow thread. First row st. b/n. second row st. s/n and third row st. b/n. The length will depend on the circumference of the ankle. Now you need to knit the chain v.p. black yarn the same length as the strap, and insert it between st. s/n.
Sew on the strap. We decorate the outside with a button. All that remains is to knit a pair of boots.
Option 2
For those who prefer refined and elegant simplicity, we offer the following options.
The principle of attaching to the sole and knitting is the same. You can use different colors as decoration by tying the boot tops with stripes or decorating them with flowers.
Option 3
Crochet boots with scales pattern
This knitting option is also called “crocodile skin”. Not a single animal will be harmed, and you will become the owner of boots made of “crocodile skin”.
In this model, it will be necessary to attach the sole after knitting, since here we also make the insole using a hook. Of course, you can take the finished sole and perform the manipulations described above for tying it. Then knit according to the spout pattern suggested below. Try it, experiment.
We start knitting from the sole. The work will take place in a circle (or rather an oval, but the principle is the same). In order to calculate the number of chain stitches in a cast-on row, you need to measure the length of the foot and its width. Now we subtract the second from the first value. The resulting number* will be the length of the initial chain. We knit a sample of 10 x 10 cm and calculate the number of loops* in one centimeter. We multiply two numbers with * and get the number of loops in the cast-on row.
So, a chain of v.p. dialed.
First r. 3 v.p.p. and another 5 tbsp. s/n into the same base loop. Now we knit st. s/n. in the last loop we knit 6 tbsp. s/n and move on to knitting on the second side of the cast-on row. We finish 1 s.s. in the 3rd v.p.p.
Second r. 3 v.p.p. + 1 tbsp. s/n in the same loop, in the next five loops we knit 2 tbsp. s/n with a common basis, then 1 tbsp. s/n. In 6 tbsp. s/n knitted from a common base we knit 2 tbsp. s/n. On the second side of the oval we continue to knit st. s/n. We finish 1 s.s. in the 3rd v.p.p.
Third r. We already have a small oval. The narrow sides consist of two st. s/n, knitted from one base, 12 loops from each edge. We knit 2 tbsp into these loops. s/n with a common base, alternating with 1 tbsp. s/n. This makes 18 loops. Next we knit 1 tbsp. s/n on the wide sides.
In the fourth row along the edges on 18 loops we knit 2 tbsp. s/n with a common base, alternating with 2 tbsp. s/n. This makes 24 loops. We knit the wide sides as usual, without any increases.
The size of the sole is determined individually. You can make a drawing of the foot and periodically try on the work.
When the sole is finished, continue knitting the toe and heel without tearing off the thread. Thanks to the elastic pattern of embossed columns, the finished boot will fit snugly on the foot.
Below is an approximate knitting pattern. The pattern will be preserved, only the number of loops in the rows will change.
We knit one (first) row with simple stitches. s/n without increases.
Second r. knit in the round with raised purl (concave) stitches. s/n. Please note that in the diagram the wider rows are the heel and toe.
Third r. We knit alternating convex and concave columns. It turns out an elastic band 1 x 1. Follow the diagram. Try on the boot periodically to adjust the number of eyelets.
To move on to knitting the boot, you need to knit 1-2 rows of simple stitches. s/n.
We begin to knit the boot with a “scales” pattern. The work is done in a circle. Below is the diagram.
First r. 3 v.p.p. + 1 tbsp. s/n in the same loop, * 2 ch, skip 2 loops, 2 tbsp. s/n with a common basis *, continue from *.
Second r. we knit in the opposite direction, using the bodies of double crochets as a base. 3 vp, 4 tbsp. s/n (insert a hook between two stitches s/n and the right column serves as the base) + 1 ch. + 5 tbsp. s/n (we insert a hook between two stitches, s/n, and the left column serves as the base). For convenience, we turn the knitting upside down. Every first 2 tbsp. s/n with a common base serve as an arch for (5 treble s/n + 1 vp + 5 treble s/n). Every second 2 tbsp. We do not knit s/n with a common base; when transitioning between scales, we perform 1 ch.
Third r. Turn the knitting back over. We knit similarly to the first row. Fourth r. we knit “scales” in a checkerboard pattern relative to the second row.
The height of the boot will depend only on your desire. The last row is performed st. b/n.
As an additional decoration, you can sew a button along the outer edge.
Option 4
Crochet boots with funny pom-poms
We also make this model with a knitted sole.
You will need:
- Thin and thick acrylic yarn;
- Hooks No. 4,5 and No. 5.
The sole is knitted similarly to the previous model. You can choose any other oval pattern on the Internet.
We knit the last row without increasing st. b/n.
We knit the upper part not from bottom to top, but along one long and narrow fabric. Using hook No. 5 we make a chain of 17 chain stitches. thread in two layers (thick + thin). We knit in return rows with crochet number 4.5 half-stitch. s/n for the back half-loop. When the length of the fabric reaches the circumference of the leg (this is approximately 30 rows), we finish knitting. We connect the resulting ribbon into a ring. We fasten the thread, cut it and hide it.
We will knit the boot from the top of the boot, securing the loops of the first row into the side stitches. s/n, they act as a typesetting row. We knit in return rows.
First r. knit, alternating 2 tbsp. s/n in 1 side half-stitch. s/n and 1 tbsp. s/n in 1 side half-stitch. s/n.
We perform the second, third and fourth rows with relief stitches. s/n.
Starting from the fifth row, we narrow the shaft. To do this, select 4 symmetrical loops at an equal distance from each other. We knit this row st. s/n, in the marked loop we perform 2 tbsp. s/n with a common vertex. We knit behind the back wall.
From the 6th to the 9th rows we knit with relief stitches. s/n.
10th r. We knit similarly to the 5th, decreasing four loops at an equal distance.
We perform the 11th and 12th rows with relief stitches. s/n.
We begin to knit the instep of the boot.
The beginning of the 13th row is the central point of the future heel. We select the opposite central point of the future nose. We also mark the loop before and after it. Now we knit st. b/n to the loop in front of the middle loop of the spout. Here we knit 10 ch. and knit 3 v.p.p. in them. and then a row of st. s/n.
We now have a branch for the spout.
We fasten this strip from Art. s/n on the boot in the loop located after the third marked one. We knit further st. b/n. We finish 1 s.s.
We will perform the following rows in a circle st. s/n.
14th r. At 3 v.p.p. we knit branches for the spout 5 tbsp. s/n. we finish row 1 s.s. in the 3rd v.p.p.
15th r. performed similarly to the 14th, in 5 tbsp. s/n, knitted in an arch of 3 ch. nose, we knit 2 tbsp. s/n with a common basis. Now the width of the spout is already 10 loops.
We knit the 16th and 17th rows without increasing st. s/n.
We turn the work and knit the 18th row of half stitches. s/n. fasten the thread.
Now you need to connect the parts using 1 row of s.s. The line will be embossed.
The seam of the connection of the upper part of the boot (it is located across the rest of the knitting) is located at the back. It is necessary to knit a chain of vp with a thread in two folds. approximately 1 meter long. Mark its center and secure it to this seam.
Attach 1 pompom to each end.
How to make pom poms
To create pompoms you will need two cardboard circles. They need to cut out the central round part and a small piece along the radius.
Fold the circles so that all the cut out parts match. Now we begin to wind the thread without breaking away from the ball. The larger and tighter the winding, the fluffier and more magnificent the pompom will turn out. When you consider the number of turns sufficient, you need to use scissors to cut the wound threads along the circle. Now you need to slightly separate one cardboard from the other and place a piece of thread in the resulting hole. Now we tie it around a bunch of threads, straighten the cut ends and remove the cardboards. Shake and get a cute pompom.
We attach them to the ends of the chains and tie them beautifully, making several turns around the leg.
Boots Brown crocheted
Size: the boots in the photo are size 36, but the description allows knit boots any size.
You will need:
1 skein of Camila yarn (100% mercerized cotton, 1000 m/100 g)
2 skeins of Camila Brilhante Fina yarn (100% polypropylene, 500 m per skein)
Hook 2 mm
2 soles with insole
Shoe glue
Elastic band 1/1: knit in circular rows according to the appropriate pattern
Decorative cord: knit according to the corresponding pattern
Knitting patterns:
DESCRIPTION OF WORK:
The boots are knitted in 2 threads (1 Camila thread + 1 Camila Brilhante Fina thread).
Before starting knitting, put 2 threads together, unwind a small ball (thread about 30 cm long) and set it aside for now.
The finished sole consists of 2 parts: the sole itself and the insole. Separate the insole from the sole. Make a pattern for the top of the sole.
General instructions for knitting a sole: make a chain of chain stitches along the length of the pattern and knit one half of the sole first. The diagram shows how, when knitting, you can repeat all the curves of the pattern, making columns of different heights. You can also knit stitches with 3 crochets and/or knit 1-2 more rows. If desired, you can knit the sole using single crochets only.
Attention! There is no need to make knots when knitting soles! To knit the second half of the sole, pull the thread through the last knitted loops and make the initial connecting stitch. Having finished knitting the sole, pull the thread through the last knitted loops and cut the thread.
Attach the thread to the middle of the notch on the inside of the sole and knit perpendicular to the sole in circular rows with double crochets.
In the 1st row, knit 1 double crochet in each loop of the sole; there is no need to decrease or increase.
In the 2nd row, mark the edges of the sock on the sides and decrease 1-2 loops in these places (knit 2 double crochets together), forming the toe of the boot.
In the 3rd row, repeat decreases on the toe, and also decrease 3 stitches evenly (knit 2 double crochets together) on the back of the boot, forming the heel.
Don't break the thread!
Advice : As you knit, write down all your steps so that you can repeat them for the second boot.
Attach a thread from a separate ball to the right of the 7 central loops of the sock and knit 7 rows on these loops in forward and reverse directions, forming the front part of the boot (attach the ends of the rows to the sides using connecting posts). Break off the extra thread.
Continue knitting with the main thread. Knit 4 circular rows around the “entrance” of the boot. In the next 7-8 rows, decrease 3-4 stitches evenly in each row until the “entrance” into the boot is only slightly larger than the circumference of the ankle so that the foot can fit into the boot. Knit 2 rows straight. Next, in each row, evenly add 2 stitches (knit 2 double crochets in one loop of the previous row), until the circumference of the boot matches the circumference of the shin. When making these additions, you should focus on your size and, if necessary, do them more or less often. The height of the boots in the photo is 22 rows of double crochets, starting from the instep of the leg. You can change this height at your discretion.
Lapel. Knit 6 circular rows with 1/1 rib without increasing or decreasing, ending with 1 row of single crochets. Turn outward.
Decorative cord. Knit according to the appropriate pattern. The length of the cord in the photo is 60 cm. The length of the cord can be longer/smaller depending on the number of turns around the boot.
Assembly and finishing:
Sew the cord onto the boot, starting at the bottom side and working up around the boot.
Glue the knitted sole to the finished sole and let it dry thoroughly.
Insert the insole into the boot.
Knit the second boot symmetrically to the first.
Advice: After the glue has completely dried, so that the boots do not slide down the leg, the knitted part can be starched.
Knitted clothes and shoes are at the peak of popularity today. Because it's predominantly handmade, then such products cost a lot. At the same time, crocheting boots is not such a difficult task. It is accessible even for beginners.
Crochet house boots
As a workout, you can start with slippers. In this case, the most suitable simple techniques and patterns.
Knitting should start from the sole. You can take it ready-made from old slippers, or crochet it, or use a felt insole. The last option is the easiest to prepare. Felt is not difficult to cut with an awl and serves for a long time at home. To increase its wear resistance, dermantine or leather can be sewn to the bottom.
So, we take the insole and tie it in a circle with single crochets. We reach the beginning of knitting, make a lifting chain of air loops and continue knitting in columns a couple of centimeters in height.
And then there are options on how to crochet boots. Having measured the required length from the toe of the sole, you can continue knitting, reducing the number of loops in each row, so that in the end you get the front part of the boot.
You can knit this part separately and then sew it on. The second option is a little simpler, but looks less aesthetically pleasing.
Knitting freebies
When the lower part is completed, you can move on to the freebie - the boot. crochet stitches are made the same or without as the bottom of the product. If you wish, you can knit the top with a more interesting pattern, which you can choose from the catalog or use your own experience.
For search beautiful patterns It makes sense to look at craft magazines. The designations on all diagrams are the same, and the database of patterns in popular sources is much larger.
When the desired height is reached and the homework is almost completed, do not forget about decorations. These can be pompoms, buttons, beads, or crocheted flowers and leaves. The flight of fancy in this matter is not limited to anything.
Dress boots
You can also crochet boots for the street. The scheme described above is also suitable for them. Only the work should be more subtle and accurate. First you need to prepare the sole. It, like the insole, needs to be tied to make a base for the future product. It is necessary to work carefully, without piercing the bottom of the sole, otherwise the foot will get wet even from the slightest dew, and the threads will wear off on the asphalt very quickly, and the boots will have to be repaired.
For the off-season, you can continue knitting boots in stitches, but crocheted patterned boots look more interesting. The pattern of the pattern you like should not have a very large report, so that if possible you can change the width of the freebie.
Square motifs
You can also crochet boots in another way. A master class of such a product from motifs is also found many times. For such boots you will need a multiple of 4 square motifs, plus 1 motif for the front. On average, 13-17 squares are enough for beautiful openwork shoes. At size 38, the side of the motif should be approximately 10 cm.
We start crocheting boots based on similar motifs. The square diagram is given as an example and can be replaced by any other suitable size.
The most interesting thing about this method is the assembly. Squares can be connected by tying them to each other, but in this case, at the junction you will get a protruding relief seam. You can simply sew the finished product.
Collecting squares
From ready-made motifs we make a 3*4 or 4*4 square canvas. We connect them into a tube, leaving the 2 lower motifs unstitched. An odd square is inserted into this place with a blade. Thus, its triangular part protrudes forward. In total, this ends the crocheting of boots. The master class for further actions is related to sewing.
We take the sole blank and the boot blank and tie them with thread in 4 places so that during the sewing process we do not warp the finished product.
The last stage is decoration. It depends only on the purpose of the boots and the aesthetic taste of the master.
And finally little advice: in order for the boots to keep their shape well, it is better to take and crochet it 1-2 sizes smaller so that the fabric becomes denser. Otherwise, the boots will have to be constantly starched.
African motif
Those who like to knit from motifs definitely know the pattern of the 6-sided African motif. It is colorful and easy to knit. It is also a universal constructor that can convey any shape.
These motifs make the most beautiful crocheted house boots. The 6-sided blanks are assembled in such a way as to form a slipper. 4 pieces are enough for this. If you need high boots, you can sew 2 more motifs on the sides.
The benefit of this method is that it is a great way to recycle leftover yarn. Each motif can be unique and not repeated.
The sizes of the motifs can also vary. As a result, the product itself ranges from small children's slippers to large house boots of size 46.
Such slippers will give not only warmth, but also positive emotions to their owner.
Openwork or dense?
The hook provides a variety of possibilities for implementing the same idea. At the same time, it complicates the answer to the question of how to crochet boots. The choice of knitting method depends on the purposes and materials to be worked with.
The dense knitting of motifs and columns is ideal for indoor shoes. In this case, the grace and subtlety of work are not as important as warmth and comfort. You can decorate such slippers with separate elements, pompoms. You can knit this product from leftover yarn and play around a little with the asymmetry of the boots.
Openwork products are ideal for summer. In them, the leg does not get tired and does not overheat. At the same time, these boots look very rich and elegant. They are suitable for both everyday wear and for combination with cocktail and evening dresses.
Particular attention should be paid to the pattern with which the boots will be crocheted. Its pattern should be combined with the main dress. It is ideal if the pattern is slightly repeated in both parts of the suit.
There is a small nuance regarding openwork boots: make sure that there are a minimum of holes in the toe area, otherwise they will not stick out very nicely, creating the effect of shoes that are too small.
Sole selection
For house boots, we have already mentioned sole options. With street shoes, things are a little more complicated. It is not always possible to buy a new sole. We have to come up with something from existing options.
Ideally, the basis on which the boots are crocheted are shoes. There is no need to cut them if you feel comfortable wearing them. By tying the lower part, you will receive perfect shape bottom of boots that cannot be achieved in any other way.
If you still need to remove the base of the shoe, try to keep the toe and back. In these places they most often become deformed and lose their appearance.
If we take the sole from an old shoe, you need to make sure that it is in excellent condition. The sole must be intact, without cracks or large abrasions. If there are heel caps, replace them before sewing on the boot to prevent the shoemaker from accidentally staining it.
Yarn features
The yarn itself from which the shoes are knitted is also of considerable importance. The durability of use depends on its quality. It is difficult to say for sure which is better: synthetics or natural fabrics. For indoor slippers, cotton and wool are more suitable; for outdoor shoes, it makes sense to pay attention to acrylic.
Remember, outdoor shoes get dirty quite quickly and require frequent cleanings. Therefore, it makes sense to choose yarn that is resistant to repeated washing.
At the same time, synthetics are poorly tolerated in hot weather. It does not breathe and creates a greenhouse effect in the boot. And this is a whole series of problems and the risk of fungal infections.
To summarize, we note that crocheted boots, the pattern of which has already been chosen by you and is ready for implementation, must be knitted from high-quality expensive yarn that holds its shape well and is easy to clean. Having saved on the quality of thread, don’t be surprised if after a week or two you can’t look at your masterpiece without tears because the boots have become like old footcloths.
