Is it possible to iron leather? We smooth out the leatherette bag. The simplest but time-consuming method

Leather products generally do not require ironing. However, there are cases of severe creases in the skin or slight wrinkled untidiness when something simply needs to be done. This is where a lot of questions arise: how to actually iron a leather item of clothing, is it possible to iron it with an iron, what temperature to use?

How to iron a jacket at home

Leather is a fairly elastic material that does not require regular ironing and can straighten itself over time. Therefore, if the bruise is small without deep creases, you can leave it leather jacket or another leather product on a trempel separately from other things or the back of a chair for natural alignment. True, this method takes a long time. The process may take 7–10 days.

Do you know what the word “trempel” means? No, there is nothing mysterious or unusual about it. This is the well-known clothes hanger or coat hanger, as it is sometimes called. The term is widespread, for example, in the Belgorod region and in the territories that were separated from Ukraine. And he gained universal fame after the publication of the book of memoirs of Lyudmila Gurchenko.

Using an iron

This method contains a certain risk of spoiling the product, but if everything is done correctly, the skin will not suffer, but, on the contrary, will acquire a beautiful well-groomed appearance. However, it is better not to iron items with laser processing, rolling, embossing or varnished, so as not to damage the decor.
The iron can be used to iron leather and leatherette products.

1. It is better to iron a jacket from the inside out, but only if the product has a thin lining without insulation. IN otherwise a thick layer of insulating material will make the smoothing process less effective.
2. Lay the product on the ironing board, straighten the material so that there are no folds, gathers, or waves. When ironing, they can cause new creases.
3. Cover the top of the product material with an ironing iron - a fabric through which ironing will be carried out. Calico, satin, teak, and linen are best suited for this. You can use another type of fabric, but it is important that it has a dense texture without a raised pattern. It is better to choose white or light color. Check that the fabric is not dyed. There is no need to wet the iron with water; it must be dry and clean.
4. It is recommended to set the iron temperature at “2 points”, which corresponds to 110–150 o C. The steam function must be switched off. Otherwise, the skin may “cook” and become rough and brittle.

5. Advice. If the product is made of thin leather or is ironed on the front side, set the lever to “1 point”. Then, if necessary, the temperature can be increased.

6. The ironing process itself is as follows: apply the iron to the fabric for a few seconds without moving it. Then pick it up and apply it to another place. Treat the entire surface of the product in this manner.
7. To iron sleeves, you must use a special long and narrow pad. It is inserted inside the sleeve and allows you to smooth it out from all sides. You can use an arm guard - a device with the same function. If neither one nor the other is available, a rolled up towel will do.
8. If there is a strong crease on the product, you can use a press to remove it. For this purpose, any smooth object, for example, a book, is suitable, which must be applied with force to the skin heated with an iron for a few seconds.
9. Important. When the entire product is ironed, do not rush to put it on. Hang it on the trempel, let it cool and sag a little. The ironing result will be better preserved.

Regardless of the original condition of the jacket, iron it entirely so that the ironed parts in places where there were former creases do not stand out against the general background.

Video: how to iron a leather jacket with an iron

Steaming

The method is well suited for products made from genuine leather. Items made of leatherette and eco-leather are less amenable to steaming. The procedure is best carried out with a special device - a clothes steamer. But you can also use an iron with a steam function or a steam brush.
A professional steamer is an excellent device for smoothing natural leather.

1. Before you begin the procedure, carefully inspect the product and remove any dirt, since during steaming any dirt on the clothes is even more deeply ingrained into the structure of the material.
2. Suede and smooth skin can be steamed from the outside, but rolled or laser-coated leather should be steamed from the inside on the lining side. Otherwise, there is a risk of damage to the coating.
3. To steam, hang the product on a trempel of suitable size. This will avoid deformation and stretching of the shoulder line.
4. Turn on the device and notice the stream of steam. It should be uniform. Otherwise, hot drops of water falling on the skin will leave streaks and stains.
5. Start steaming at a distance of 20 cm from the product, gradually reducing it to 15 cm. It is not recommended to expose the skin to steam from a shorter distance, as this may cause thermal burn material that cannot be eliminated.
6. Do not hold the steam stream in one place under any circumstances. The resulting droplets of water can damage the skin. And contact with hot water is extremely undesirable for it.

7. The thinner the leather, the faster it will heat up under the influence of steam, and the less time it will take for the entire process.

8. Start steaming with small parts: collar, sleeves. For better smoothing, try pulling the material slightly with your hand. But do not overdo it, otherwise the product will stretch.
9. After steaming the entire product, do not remove it from the trample, let it hang and dry at room temperature. Moisturized skin should expand under its own weight.

Video: how to steam leather jackets and other leather goods

Using the press

On the Internet you can sometimes find advice on using a press to smooth out rough skin creases. It is suggested to place the product on a horizontal surface, smoothing out all the folds and irregularities with your hands. And then put some heavy object on top like a press and leave it in this state for a day or a little less. However, the method raises some doubts. Let's say we did everything as expected. On top, as a press, they placed a boiler with water or a thick stack of books. And they left it like that. Will a dented area in the form of a circle from a boiler or a rectangle from books appear on our leather product in 24 hours? It may happen that the problem will only get worse. And instead of one small crease, we get a larger area of ​​unsightly appearance. Therefore, it is better to refrain from using this method and use other proven and safe methods.

You can iron your jacket using professional means, produced by many manufacturers specifically for the care of leather products. Typically, moisturizing impregnation for leather items is available in the form of a liquid or spray. It contains oil and glycerin. These components improve the elasticity of the material and help restore the original condition of the skin. You can purchase a humidifier as a related product in clothing and shoe stores or in the hardware departments of supermarkets, or on specialized websites.
A professional moisturizer is one of the smoothing methods leather goods

Application:

1. Place the jacket on a flat horizontal surface. We straighten it as much as possible so that there are no folds in the material.
   A leather jacket should be treated with a humidifier on a horizontal surface.
2. If the product is in an aerosol package, the can must be shaken so that the components are mixed and homogeneous.
3. Apply the product from a distance of approximately 20 cm. Without stopping in one place, we process the entire surface of the product.
4. If the product is liquid, apply it to the product using a cloth or cotton pad, spreading it evenly over the surface.
5. Wipe the skin with a clean, dry cloth. It is necessary to ensure that the product is completely absorbed into the material. Otherwise, when it dries naturally, unsightly stains and smudges may appear.
6. We hang the jacket on the trempel. Fasten all the buttons and zippers and leave for several hours. The moisturizer will nourish the skin from the inside and the bruising will disappear.
   At the last stage of processing, the leather jacket should be hung on a hanger

Traditional methods of replacing a humidifier

As a moisturizer you can use:

Any of these products will not only smooth out wrinkles on a leather jacket, but also provide care and protect the material from scuffs and cracks. For fair and white skin, it is better to use Vaseline or glycerin. These products are colorless, and therefore will not change the color of the product itself, but will give it a beautiful gloss.

Application:

1. Use any of these means to treat the surface of a leather product. The steps are similar to using a liquid professional moisturizer.
2. Don't use too much product. Otherwise, it will not be completely absorbed into the skin, and will remain greasy spots. It is better to take a little at a time and distribute evenly. Collect excess with a napkin.
3. Polish the leather with a clean cloth and hang the item on a trempel to saturate the inner layers and level them.

Removing creases

Sometimes it happens that deep folds form on a leather product. It may take more time and effort to eliminate them. It is recommended to use a set of measures described above. For example:

1. First steam the jacket. Let it hang on the trempel for 2-3 hours.
2. Then iron it with an iron. And again leave for some time for natural alignment.
3. If the folds are still noticeable, use a professional moisturizer or traditional methods.
4. At each stage, the skin will gradually even out, and deep folds and creases will become less and less.

Important. If overall the jacket looks good and there is a crease in only one place, the entire product should be processed using the chosen method, but paying special attention Special attention problem area. In this case, the jacket will look beautiful after the procedure, and the problem area will not stand out against the general background.

If the jacket is made of fake leather

Today the industry produces many products from different types leatherette: leatherette, vinyl, stretch leather, tarpaulin and others. The peculiarity of these materials is that traditional ways the smoothing procedures described above are not always effective. For example, professional moisturizers and homemade oils are not absorbed as well into the dense structure of leatherette as into natural leather. Therefore, the result of the procedure may not give the desired effect. However, you can try to iron a leatherette jacket. For example, using an iron.

Important points when ironing:

• Set the iron to the minimum temperature (usually indicated by one dot on the scale).
• Turn off the steam function.
• Lay out the product so that its parts do not touch each other. Under the influence of temperature they can stick together.
• Be sure to use an iron - a dense, uniform fabric, preferably cotton.
• After ironing, put the product on a mannequin or your own body. This will give the material the desired volume.

Folk method - smoothing with water

1. Pour slightly warm water into a spray bottle.
2. Hang the product on the trempel and spray it with a spray bottle. It is important to moisten the material only a little, without allowing it to become completely wet.
3. Leave to dry at room temperature, away from heating devices. It will take several hours to dry completely.

Folk method - steam smoothing

This method is a popular analogue of a professional steamer.

Leather is an unpretentious and quite durable material that holds its shape perfectly. But sometimes even this excellent material can wrinkle. Especially if its storage conditions leave much to be desired. But how to smooth out a leather jacket if it is seriously wrinkled? Is it possible to do this without consequences and with minimal risks of spoiling appearance clothes?

Should you trust professionals?

If you already have a very expensive leather item, then before ironing your leather jacket at home and possibly getting a completely unpredictable result, we recommend that you contact a specialist. Take your jacket to the dry cleaner.

In this place, they will not only iron your item with minimal risk, but also, if necessary, clean it with gentle care. chemicals. As a result, you simply won’t recognize your outerwear. A significant disadvantage of such a solution is the high cost of such services. We'll talk about how to iron a leather jacket at home below.

Smoothing under its own weight

The most delicate type of smoothing is straightening the material under its own weight. In order to perform this simple procedure, you need to thoroughly wash your jacket. And then you should hang it on hangers.

Be sure to fasten it with all zippers, buttons, and clasps. After drying naturally, your clothes should look clean and well-groomed. Moreover, at the very good option it will smooth out under its own weight. Smoothing things without washing works in a similar way. It is also hung on a hanger and fastened. After some time, it “settles” itself and smoothes out.

Dry ironing wisely

One of the most simple options How to iron a leather jacket is classic dry ironing. This is the most common procedure that many housewives perform to smooth out dried washed linen, wrinkled blouses, skirts, and, less often, outerwear. A leather jacket can also be ironed. However, for this the following conditions must be met:

• Set the switch to the highest low temperature.
• Smooth only from the front side. It is worth ironing on the reverse side only if there is no lining material at all.
• After heating the iron, you should place a small piece of gauze, thin cotton cloth or parchment paper on top of the jacket.
• When ironing, do not expose the leather product to hot steam.
• If any part of the product is heavily wrinkled, to restore it you need to lean the iron against it and hold it for a few seconds. Then you should look at the result and, if necessary, repeat or move on to the next area that needs straightening.
• There's no need to rush. Once you have smoothed one area, slowly move on to another. If necessary, repeat ironing the previous section, wait until it cools completely.
• To handle difficult and inconvenient areas, use a special ironing board stand.

After you manage to iron the leather jacket, as in the case of other outerwear, the product must be hung on a hanger and left alone for a while. When it takes on the shape you need and has cooled down properly, you can safely put it on and go about your business.

How to restore the shape of soft leather using steam?

Do you have a jacket from soft skin, but for some reason it wrinkled? To restore its original shape, a steamer or iron with steam is quite suitable. We have already described how to iron a leather jacket at home using a regular iron, but about steaming natural products worth telling separately.

So, using steam to straighten the skin is quite acceptable. IN in this case You can use a steam generator or an iron with a steam function. But no matter what type of device you choose to restore the shape of your jacket, you must not forget about safety rules. Specifically, hang your jacket on hangers first. Then turn on the device or appliance.

After heating, bring it to those places on the jacket that need treatment. However, you should not bring them too close. A distance of up to 14-15 cm is allowed, for best effect you should bring the device and “hover” with it for 3-5 seconds. Then move on to the next area on the clothing or repeat steaming on the same area. Now you know how to smooth out a wrinkled leather jacket using a steam generator or steam iron.

Is it possible to use steam without devices?

If you don’t have any devices or equipment with a steam function, it doesn’t matter. Create suitable conditions To soften and steam your jacket, you can do without them. To do this, hang your item on a hanger, attach it in the bathroom, open the hot water tap and close the door behind you.

As you fill your bathtub with hot water, a lot of steam will be created. As a result, the skin on outerwear will be smoothed. This natural steaming procedure will help you restore the shape of your clothing if under any circumstances your leather jacket becomes wrinkled. Let's talk in more detail about how to smooth it out using other available means.

Straightening clothes under pressure

Sometimes your outerwear, which has wrinkles, can be smoothed out using available products at home. For example, you can put your clothes under a makeshift press. A stack of weighty and thick books, a large bottle filled with water, a box of potatoes, etc. are quite suitable for this purpose.

From physics lessons we know that mechanical pressure smooths out any bruises and irregularities. Therefore, the same method will work on your jacket as well. Moreover, this can be not only clothes made of natural, but also artificial fabric. Here's how to smooth out wrinkles on a leather jacket using a press:

1. Prepare a flat and clean surface (let it be, for example, a table).
2. Place the jacket on it, having first straightened all its details (sleeves, collar).
3. Place an improvised press on the most dented areas of the product.
4. Check everything again and straighten it out with your hands.
5. Leave the item under pressure for at least 8-10 hours. Less often, you will need a whole day for this procedure.

If you do everything correctly, after a few hours your jacket will smooth out again. But, according to experts, this method will be relevant only for small irregularities and infrequent folds.

How to iron a leatherette and leather jacket?

Products made from natural or artificial leather can be smoothed using fatty oils and creams. This method is considered simple and gentle. Moreover, fatty substances, which are found in almost every home, have a good effect on the condition of your tissue. It is smoothed out, its appearance improves, and it appears natural shine. So much so old jacket will look like new.

So, to work you will need regular Vaseline. To do this, you need to squeeze a small amount of the product onto a swab or cotton pad. And then, with its help, all that remains is to thoroughly rub the substance into the most wrinkled places on your clothes. To get an excellent effect, just place the product on the disk and repeat the whole process about 3-4 times. After this, you need to leave the jacket to dry.

An excellent substitute for Vaseline is peanut butter. It is well absorbed and has an excellent effect on the fabric. Glycerin works in a similar way. However, unlike Vaseline and oil, this product requires preliminary dilution with water. To do this, take 100 g of the product and dilute it with warm water in a plastic container. Then you should take some thick cloth, dip it in water with Vaseline and start wiping the wrinkled areas on the jacket. Next, all that remains is to let the product dry.

How to smooth synthetic leather naturally?

If your jacket is made of faux leather, it can also be ironed naturally. To do this, fill a spray bottle with water and spray the folds a little. Then put the jacket on yourself and walk around in it for 2-3 hours. Over time, the product will completely smooth out and take on the look and shape you want.

Before choosing one of the options suitable for smoothing the material, carefully study the manufacturer's label. On some items it is written that steaming is prohibited.

To avoid unpleasant consequences, it is also recommended to treat not the entire surface of the trigger with chemicals or any other means, but only those areas that need to be smoothed.

And to avoid the need to iron out wrinkled clothes, it is better to store them on a hanger in a special case and closet.

Products made of leather and leatherette are always in fashion because they are stylish and practical. But they look attractive only if proper care after them. Their owners need to know, for example, how to iron a leather jacket.

When smoothing is required

Creases and folds on leather products arise from regular wear and improper storage. Sometimes the problem is discovered upon purchase if the product was incorrectly packaged. There is no point in refusing to purchase because of slight bruising; the item can be quickly put in order.

Is it possible to iron a leather jacket with an iron?

Most often, unnecessary folds are eliminated using an iron. Look at the product label for special symbols. Ironing is usually allowed, but precautions are necessary.

1. Select temperature mode up to 140 degrees (silk), turn off the steam function.
2. Lay out the product on a flat horizontal surface, straightening the lining.
3. Place cushions (such as clean, folded towels) into the sleeves.
4. Cover the item with a clean, thick cloth, then begin ironing.

Important! Artificial and natural leather fabric should be ironed carefully, without pressing or stretching.

How to iron skin - smoothing methods

In addition to the iron, you can use a steamer, nut oil, a special moisturizer, Vaseline, any heavy smooth object, and water. In some cases, it is possible to do without additional devices altogether.

Natural alignment

If the creases in the item are minor and the fabric is loose, you can straighten it out without special tools. Here's how to tidy up your leather jacket the natural way.

1. Shake the thing properly.
2. We hang it on a hanger of the appropriate size so that it does not come into contact with anything.
3. Fasten the zipper or buttons, then gently, without stretching, smooth it out with your hands.
4. In the case of leatherette, first spray the item with clean water. Natural leather should not be wetted.
5. After two hours we check whether the creases remain. If nothing has changed, then this smoothing method is unsuitable.

There is another option for how to iron a leather jacket without an iron and household chemicals, if it is not too wrinkled. It is enough to put on the product and walk around in it for several hours. The material will “fit” on the body and look perfect.

Using a steamer

You can smooth out wrinkles on a leather jacket using a steamer. It will do a great job with creases. To protect the fabric from deformation, follow the rules of caution.

• The product is placed on hangers.
• The working device is held 20 cm from the jacket, gradually bringing it closer to 15 cm, no closer.
• First, the collar and sleeves are steamed, then the rest of the surface of the product.
• To avoid damaging the fabric, do not keep the steamer in one place for a long time.
• Do not touch the product with your hands while steaming, otherwise stains will remain.
• After processing, allow the jacket to cool and dry completely.

Using the press

Leatherette and eco-leather are sensitive to high temperatures, such products should be processed with an iron or steamer last, having first tried more gentle methods. For example, using a press (any heavy flat object) gives a noticeable result.

1. Lay out the jacket on a flat horizontal surface, straightening out the folds.
2. Cover with a clean, thick cloth.
3. Once again making sure that there are no creases, we place a press on the product, for example, a stack of books.
4. After 12 hours, remove the press, shake the jacket and place it on a hanger.

Products for leather products

You can straighten creases on a leather jacket using products from a household chemical store. For example, a special moisturizer in the form of a spray. Thanks to its composition, it softens and smoothes the skin without damaging the structure. We follow the instructions on the can.

1. We straighten the product on a flat surface.
2. Shake the can of humidifier and spray the product over the surface of the product from a distance of about 25 cm.
3. Rub the product into the jacket using a rag.
4. We hang the item on hangers, fasten it and let it dry.

Applying oil or Vaseline

Instead of a special spray, you can use nut oil, petroleum jelly, glycerin. Apply the product to a leather jacket 3-4 times with a cotton pad, after straightening the fabric with your hands. Then hang the product on hangers until completely dry.

There are many options for ironing a leather jacket. The choice is made primarily based on the type and thickness of the fabric. The following rules are observed.

• When working with an iron, be sure to use an ironing iron (thick fabric that is placed between the sole of the device and the product).
• Embossed, patent leather Never iron or use a steamer or press.
• Follow the instructions on the product label.
• First test the method on an inconspicuous area of ​​the item.

Removing creases from the natural leather of the collar

This is where they form most often. They can be easily removed with an iron. After smoothing the natural leather on both sides, lubricate the problem area with Vaseline or nut oil.

How to straighten blemished skin

They choose especially carefully how to stroke the leather if the product has defects. Steam and a humidifier are immediately abandoned, but a press, iron, and nut butter are quite suitable for solving the problem.

What to do with a winter leather jacket

Find out if the insulation can be detached. But even if this is impossible, do not despair and do not rush to dry clean the item. All of the above methods are quite suitable for winter clothes.

To ensure that your item lasts as long as possible, follow the following care rules.

• Do not dry it with a hairdryer, the fabric will not be smoothed this way, but will become stiffer.
• Do not allow the material to come into contact with hot water to avoid color loss and deformation.
• Do not try to stretch the jacket yourself, as this may damage the fabric.
• Do not dry leather clothes near heating devices, radiators, as well as in direct sunlight, otherwise the shape and color of the item will change.
• To avoid creases, store the product on hangers.
• Protect from over-moistening and over-drying.
• Do not wash leather items in automatic machines, only by hand. Or go to a dry cleaner.
• Use it by special means for the care of leather products.

A wrinkled leather jacket does not look aesthetically pleasing. You can get rid of creases by going to a dry cleaner or doing it yourself. Use the following recommendations for proper ironing and use of products so that they please you for as long as possible.

You will need

• - spray bottle;
• - damp cloth;
• - colorless cream;
• - hangers;
• - newspapers or special shoe molds.

Instructions

If the artificial leather or chair is wrinkled, wet the sheet, squeeze it well at 1000 rpm, cover the furniture thoroughly, and moisten it with a spray bottle as the sheet dries. Do not use a sheet that is too damp to smooth artificial leather; stains will remain on the upholstery. upper layer may begin to peel off in layers. Also, never iron the top layer of artificial leather, even from fabric; you can only iron the base and then at a very low temperature.

If you have stored artificial leather incorrectly, wipe it with a damp cloth, stuff it with old ones or cloth to give it shape, lubricate it with colorless cream, and place it away from heating appliances. After 24 hours, lubricate the shoes with cream again. Under the influence of softening substances and forced straightening, all shoes will return to their normal shape, and wrinkled skin will be smoothed out.

There are no other ways to smooth artificial leather. So that you do not have to constantly spend extra time smoothing your products, store them correctly. After the season, wipe all skin damp soft cloth, dry under a canopy, grease with colorless cream. Hang your outerwear on hangers and place it in a spacious place; do not hang the artificial leather tightly, it should hang freely. Wash your shoes, dry them away from heat sources, lubricate them with cream, stuff them tightly with old newspapers or cloth and place them on a shelf.

Video on the topic

Related article

Jackets are worn in the spring, and in winter and summer they are meant to be hidden in the closet. When there is simply nowhere to hang the jacket, it is folded and put away in a drawer. Needless to say, after being removed from the box, the jacket is wrinkled and does not straighten out. The greatest difficulty is caused by ironing leather jackets. Since you can't iron your skin, you need to know some tricks to help you deal with unruly skin.

Instructions

Jackets made of thin leather can straighten out if you hang them on hangers for a while. But this option is only suitable for a jacket that is slightly compressed during storage. Large folds will not straighten out this way.

The second way is . But forget about the iron, this method is more gentle. Hang your jacket on hangers over the bathtub and turn on the hot water. Just be careful not to get wet. The straightening process should only occur under the influence of hot steam.

If the jacket stubbornly refuses to part with the folds, use a steam generator. He . The steam jet must be directed at the leather product from a distance of at least 10 cm from all sides. Avoid condensation. It can ruin your skin.

In the most severe cases, you cannot do without the help of dry cleaning. When you take your jacket to the dry cleaner, you can be sure that they will not only get rid of folds and creases, but also clean it.

If stored improperly, natural leather becomes wrinkled, but it does not straighten out on its own; it needs to be smoothed out. This can and should be done, because if skin iron it carefully, it is very difficult to spoil the item. Smooth out skin maybe several easy ways.

Instructions

Hang it on a hanger and stuff it with paper or old newspapers. Moisten the natural one well skin water and wait a little, it should begin to straighten under the influence of moisture. If after complete drying the effect is not noticeable, you can repeat what you did again, maybe the skin will smooth out the second time. This method usually does a great job of removing wrinkled parts.

Take a thick cotton cloth and iron the product with reverse side(not front) with a regular iron. The heating temperature should be medium, you can turn on the steam function. It is not advisable to iron through gauze, it is too much, so natural leather may be slightly deformed. For ironing, do not use old models of irons; they sometimes damage the item, since they do not have a thermostat installed.

Finally, you can simply start working on the product, and the skin will gradually smooth out on its own. Always try to hang it on a hanger and place it exactly on the shelf, fold the rest of your things carefully, then there won’t be any problems. Well, if all else fails, go to a dry cleaner: they will iron the product for you.

Recently, TV shows, magazines, and online publications often say that ironing bed linen is harmful: after treatment with a hot iron, it does not allow the skin to breathe fully. But many housewives still prefer to make the bed with clean, fresh, perfectly flat sheets without a single wrinkle. It would seem that ironing is a simple matter, but it has its secrets.

Instructions

Before washing, including sheets, read the care label. Select the appropriate washing mode, and if it supports the light function, be sure to use it: this way you will save a lot of time, because you will avoid smoothing out folds and creases on the sheets.

When hanging washed sheets, fold them in half, matching the corners and edges, and hang them flat. Try not to overdry your laundry, iron it slightly damp to ensure it looks flawless.

An irreplaceable thing in the house - ironing board. To iron sheets, place it on the top level to prevent laundry from falling onto the floor. If there is no board, use a large table covered with a blanket or cover instead. It is advisable that the ironing area be well lit.

So, what to do if you need to iron something, but there is no iron nearby? Let's consider several ways out of this situation:

1. The following solution will help smooth clothes: water, vinegar 9%, fabric softener. Take all ingredients in equal proportions, mix and pour into a spray bottle. Spray the mixture onto clothing and wait until it dries completely.
2. Hang your clothes correctly after washing, straighten out all the folds (it is best to use soft hangers).
3. Steam will help smooth things out. Hang your clothes over a bathtub of hot water and the rising steam will smooth them out.
4. Carefully fold your clothes in the closet, then you won’t have to iron them. It is best to roll things up with a roller so that there are no kinks (which, by the way, are difficult to smooth out even with an iron).
5. Take advantage of the wet terry towel, laying out a wrinkled jumper or T-shirt on it. This method will relieve clothes from minor creases.
6. Display it on your washing machine mode with maximum spin speed, and you will get your clothes almost uncrumpled. This will make further care of your clothes much easier.
7. Smooth out the desired area on the clothing, laying it out on a flat surface. Then place something heavy on it. For example, large encyclopedia. Under the force of gravity, small wrinkles will smooth out well.

Leather items will always be popular because of their practicality, convenience, and durability. But despite all its advantages, if stored improperly, the material can become wrinkled. The deformation can be so severe that wearing the item becomes unacceptable. To correct signs of improper storage of an expensive item, you need to smooth out the material. In this article we will tell you how to iron leather correctly, what dangers exist and how to return the original shape of clothing.

Skin requires special treatment. Despite its strength and durability, improper handling can ruin your favorite item. Here we will list the main 4 ways that will allow a leather item to look good again.

We use a hanger

The method is good for smoothing out a jacket that has minor creases and folds. For example, a jacket made of thin leather may become wrinkled immediately after purchase due to improper storage. It may become wrinkled after constant wearing or folded storage.

To smooth out wrinkled leather item, necessary:

1. Shake the item with your hands.
2. We find a hanger with wide hangers.
3. Hang the product on a hanger, smoothing it with sleeves using physical strength.
4. Place it so that the clothes do not come into contact with other things or the walls of the closet.

It is necessary to leave the product for several days. This method can only get rid of slight irregularities. Also, the method is only suitable for light, thin natural leather.

If your jacket is made of artificial leather, then you need to use water. Spray the surface of the clothing a small amount water. It will be absorbed and straighten the jacket. The main thing to remember is that water cannot be used with natural leather, only artificial leather.

A similar option is smoothing by wearing clothes. The skin gets used to your body and takes the shape that will look best on you. Minor folds are straightened without any effort. To obtain the desired effect, you must use the jacket for several hours. This method is especially good after purchasing a new item. This removes kinks acquired as a result of improper storage in the store.

Unfortunately, the above methods may not be effective if there are large fractures on the product. If available, use the following methods listed in the article.

We use a water bath

Water is not suitable for smoothing natural leather, but water vapor is an exception.

1. Steaming must begin with a basin or bathtub filled with hot water. Place the leather jacket over a container of water. To do this, place it on a hanger with a hanger.
2. Avoid contact of the product with water and leave for an hour. Leave the room, especially the bathroom, closed.
3. After completing the procedure, leave the clothes to cool. If you put it on while it is not cool, it will lead to deformation.

Method of local “creasing”

The method is applicable when it is necessary to stroke the skin in a small volume, i.e. In one place. Use a converter, or if you don’t have one, use an iron with a steam function.

To do this, pour liquid into the iron and turn on the heating function. After heating the water, select the steam mode and direct the steam stream to the wrinkled area. Repeat the procedure 2-3 times, without staying long in one area. Keep the iron at a distance of 15 cm. This will prevent the material from becoming covered with water droplets. Do not touch the skin with your fingers to avoid leaving marks.

Table press

The method is used to smooth eco-leather and leatherette. For a home press, you can use a stack of books, bottles, or any other heavy object. The only rule is a smooth surface adjacent to the skin. Manipulations with the jacket are as follows:

1. Spread the skin on a flat surface.
2. Cover the skin with a clean, thick cloth.
3. Use your hands to smooth out the wrinkles and install the press.
4. Leave in this form for at least 12 hours.
5. After the procedure, remove the press, shake it and leave it on a hanger with a hanger.

It is worth mentioning that regular ironing is quite applicable for genuine leather products. Do not use it on artificial leather, eco-leather, or on clothes with rough embossing, embossed patterns or embroidery. Ironing can be done on either side, but we still recommend ironing on the wrong side. Cover the material with a thick cloth before the procedure to protect the lining and the skin itself from the effects of temperature. The heating mode should be minimal with the steam supply turned off. Iron only by applying pressure to avoid stretching the skin. After the procedure, let the items cool.

Prohibited methods

There are a number of methods that cannot be used due to damage to your favorite leather item.

1. Do not use a hair dryer. The hair dryer releases a stream of dry hot air, which will make the product rough and will not get rid of wrinkles.
2. Do not use hot water. Hot water deforms the material and washes out the color.
3. Stretching folds. When using physical force, the jacket will become deformed and will not get rid of the wrinkle problem.

A few important points

Each garment has its own unique features. To solve them, special techniques are often necessary, which we will describe here.

Creases on the collar. Despite the apparent complexity of the problem, the way out is quite simple. Use a regular iron and iron the jacket on both sides through the fabric. After ironing, it is recommended to rub in nut oil, Vaseline or glycerin several times. The creases won't bother you anymore.

Straightening skin with defects. It is necessary to use dry ironing methods, due to possible deformation by wet steam. Use a leather treatment product such as nut butter or iron through a cloth.

Folds on a winter leather jacket. Difficulty straightening winter jacket lies in its insulation. This jacket has fewer folds, but they are much larger than usual. If the seal can be removed, then use normal methods. If not, then ironing, steam and a humidifier are necessary. Hang the product until it cools down.

Don't neglect leather moisturizers. The special composition softens the skin and protects it from minor damage. They come in spray form, making them easy to apply. If such a remedy is not available, you can use nut oil, petroleum jelly, glycerin (dissolved in water). Apply one of the products to a cotton pad and wipe the jacket. This will soften and straighten the leather material of the product.