IN washing machine It is better to wash sneakers in special mesh bags or in an old pillowcase. Choose a special mode for sports shoes, if you have one, or hand or delicate wash at a temperature not exceeding 30 degrees. This way the sneakers will not deform and lose color. Don't forget to turn off the spin and tumble dry option.
Before putting your sneakers in the car, be sure to wash the soles and remove any small pebbles that might be stuck in the treads. Otherwise, the washing machine may be damaged.
Another very important rule: Remember to remove the sensors from your sneakers, if any, before washing.
To ensure that your sneakers hit the drum as little as possible, place a few towels or old clothes with them. This will protect your shoes from unnecessary damage, and you won’t have to listen to the knocking.
Don't add too much detergent, no matter how dirty your sneakers are. Excess powder may not come off and may leave stains. This is especially noticeable on.
How to wash sneakers by hand
If the shoes are new and quite expensive and you are afraid of ruining them, your option is to wash them by hand. This is done in warm soapy water with a soft brush. Remove the insoles and laces and wash them separately.
Study the information on the label. It should indicate what fabric your sneakers are made of and whether they are washable.
It is not recommended to wash leather and suede sneakers. To clean them from dirt, use an old toothbrush, a damp cloth, or special cleaning products that are sold in shoe stores.
How to disinfect shoes
To disinfect sneakers, add a few drops to water when washing. essential oil pine, fir, tea tree, eucalyptus, thyme, juniper or sage. All of the oils listed have antibacterial properties. Well, they will make your sneakers smell nicer.
How to dry your sneakers
Sneakers can become deformed in the dryer. And due to high temperatures, the glue that holds the sole in place can melt, so you can’t dry your shoes on a radiator or next to a heater.
Ideally, you should leave your sneakers outdoors, but you don't always have time for this. To quickly dry your sneakers, use several proven methods. Just remember to take out the insoles first: they dry separately.
1. Fan
Take an ordinary fan with a mesh, make two small hooks from available materials (wire or large paper clips will do) and hang the sneakers on the mesh using these hooks. Dry for 1-2 hours on medium to high speed.
If you simply place wet sneakers in front of a fan, they will take longer to dry.
2. Air conditioning
Place your sneakers under the air conditioner so that the blown air hits them. This will also help the shoes dry faster.
3. Vacuum cleaner
It won't dry you out completely, but it will help draw out moisture from the inside. Place the shoes in a bucket, basin or other convenient container, remove the nozzle, insert the pipe into the shoe and turn on the vacuum cleaner. Dry each sneaker for 15–20 minutes.
4. Hairdryer
You need to be careful with the hairdryer. You should not dry it with hot air: this may melt the fabric inside. It is better to choose a cold mode and dry your shoes by placing them on the floor. Never leave a hair dryer inside your sneakers.
5. Newspaper
No one has canceled the good old method with a newspaper, but this will be the longest option. Take some newspapers, crumple them and stuff them. After an hour, check the paper: if it is completely wet, replace it with dry one.
6. Silica gel
It works the same way as newspapers: it absorbs moisture. Simply place bags of silica gel beads into wet sneakers and leave for a couple of hours. Then don’t forget to dry the balls on the battery to reuse.
If you are unsure about any of the methods, try it on old shoes first. And tell us in the comments how you wash and dry your sneakers.
In the fall and winter, or even summer, wet shoes become something unusual. Snow and rain are the cause of wet shoes and not very pleasant sensations. Walking in wet shoes is uncomfortable and harmful to your health. It's good if you have a spare pair of shoes that you can wear in such critical situations. What to do if there is no other pair? This article will help you figure it out.
There are several ways to dry shoes. Despite this, using one method or another in any particular situation can be unwise and ineffective. Each method involves a specific drying technique, which differs in time. Thus, if you are not in a hurry and are simply preparing your shoes for tomorrow, you can use a cost-effective and lengthy method. If you need to run on urgent matters and there is absolutely no time, you will have to spend a little electricity.
So, below are ways in which you can speed up the drying process of your sneakers.
Drying with newspaper
Take a sheet of newspaper and crumple it into a circle, then open it up. This will give it greater elasticity. After this, you need to distribute a sheet of newspaper on the sole of the shoe so that it covers the entire surface. Over time, the newspaper will absorb moisture and eliminate bad smell and you will be able to fully use your shoes again. If you don’t plan to go out anywhere in the near future, then this method just right. The process will take 3-4 hours.
Drying with salt
Regular salt will help dry your shoes quickly. Heat it in a clean frying pan, carefully pour it into the sneakers and distribute it over the entire surface. If the salt has cooled but the moisture remains inside, repeat the procedure until the surface has evaporated.
Vacuum drying
A vacuum cleaner can also come to the rescue in this situation. Place the trunk of the vacuum cleaner in your shoes and hold it there for 10-15 minutes in each shoe. 30 minutes of such a summary cleaning and your shoes are dry and clean. Electricity costs, as you already understand, cannot be avoided.
Blow drying
But you need to be careful with the hairdryer. It is best to choose a warm or cool mode and dry your sneakers by placing them on the floor. Be careful they don't overheat. IN otherwise this will weaken and ruin the material.
Drying with a heater
One method for drying sneakers is to place them on a heater. To obtain desired result place the sneakers on the heater and wait 30-40 minutes. You may have to wait more or less - it depends on the material of the shoes. Leather and suede sneakers should not be dried directly on a radiator or near a heater. This method can disfigure your shoes beyond recognition. The fact is that shoes dry unevenly near such a heat source. Moisture evaporates only from the outside, the material begins to deform, crack, and the glued parts may even fall off.
Drying under extreme conditions
But what if we went hiking and got our shoes wet? Walking around with wet shoes is not a good idea - you can easily catch a cold. There is a need for drying. To dry your shoes in extreme situations, you must do the following:
We unlace the hiking sneakers so that they can be opened as much as possible, and take out the insole. Heat source when hiking? Of course the fire. We make a fire and begin to dry the insoles and the shoes themselves. You need to be as careful as possible, as the insoles are delicate and can very quickly be damaged by a fire. In addition to insoles, laces can melt from a fire. Most hiking boots are made from a material that can warp and change shape when dried. Therefore, as with leather sneakers, it is necessary to avoid placing the object too close to the heat source.
Since the glue softens during drying, the rubber that holds the individual elements of the shoe together may begin to peel off. Based on all these risks, make sure that the shoes are dried from the heat carried by the air or wind, and not from the flame itself. If you are still not sure about the quality of your shoes, then you should not dry your shoes by the fire. Take an extra pair of socks. Let the shoe dry directly on your foot.
These were all the basic methods for drying sneakers. Use the method that suits you best, based on your specific situation and the items that are available at the moment.
Sneakers are considered to be a universal type of footwear; they can be worn when different weather, and in any season, they are more practical as well as comfortable. But in wet weather they can get wet or dirty, regardless of whether they are made from natural or artificial material they are done. The surface can be made of leather or textile, and combined models are also made. This article describes how to quickly dry your sneakers, whether it's in a regular wash or after getting them wet. different ways at home.
In order to dry this product after washing, you must follow certain rules:
- Before drying, washed or washed sneakers are wiped with a cloth that has high absorbency. This work is performed inside and outside the product.
- To avoid the appearance of an unpleasant odor, shoes are left in a well-ventilated place at room temperature.
- When using a hair dryer for such procedures, you must select the cold air mode.
- Sneakers or sneakers need to be unlaced, the insoles removed, and dried separately; for this you can use a battery.
- Do not place the product on heating appliances or near open flames, such as a fireplace.
The main mistake in drying shoes is using hot air or heating devices. This can dry out the product and make it brittle, ultimately causing the shoes to deteriorate. Due to the rapid evaporation of moisture, the surface of the sneakers may crack and the product itself will lose its shape, so hot drying is strictly prohibited.
Drying methods
- Let's find out how to dry your sneakers if they get too wet. To do this, you need to tightly push paper, newspapers or paper towels inside. After some time, the paper must be replaced with another; this is done up to 4 times until all the moisture is absorbed. If the thing has White color, then this method is not suitable, since newspapers can produce a coloring effect. Natural materials can stretch, so you need to put in a little paper, it is better to change it often.
- Table salt has a high absorption capacity; it is dried in a frying pan, then poured into a cotton sock. The socks are placed inside the product and straightened out evenly; after the salt has cooled, they are removed. If necessary, the procedure is repeated several times.
- You can use rice: pour it into a box, place sneakers on it with the soles up, and cover with a lid. In the second method, socks are filled with rice and distributed over the entire inner surface, after a few hours it is removed.
- How to properly dry a product using silica gel? To do this, you need to place several bags of this product inside and leave until the moisture is completely absorbed. The product is reusable; after use, it is dried on a radiator. This method not only removes excess moisture, but also removes unpleasant odors.
- The base of the cat litter contains silica gel, it is used as salt, that is, filled with cotton socks and placed inside, and pulled out after drying.
- Drying can be done with a vacuum cleaner; the main hose is placed in a hole that blows out air, and the other end is directed into the product. The vacuum cleaner draws in not only air, but also moisture. After 20 minutes, the inside of the fabric will be dry.
- For a quick procedure, you can use a fan, attach two hooks to the grille, and hang sneakers or sneakers on them with the heel up. The fan should be at medium speed, after an hour the item will be completely dry.
- You can use a hairdryer, which is placed at a distance of 15 centimeters, exposing cold air, but no attachments are installed.
Using a special dryer
There are times when you need to dry your shoes instantly, and right now, there are special electric-type devices for this. They consist of two heating elements that imitate a shoe last. Dryers are placed inside the product and plugged into an outlet. At the same time, the temperature is maintained at which deformation and drying out do not occur.
The most effective is an electric device with ultraviolet radiation; it is indispensable for expensive sneakers, as it is not only capable of high-quality drying, but also removes various bacteria and fungi.
Proper shoe care
If sneakers or sneakers are not dried sufficiently, fungal bacteria can develop, since dampness is a favorable environment for them. Shoes must be completely dried; attention should be paid to this after each wear. From proper care The service life of the product will depend.
With each wash and drying, the product loses its original appearance and former strength. Use will help extend the life of sneakers special means, which have water-repellent properties.
To prevent moisture from getting inside, you can use special waxes and creams, and for suede, use spray products. This helps protect shoes from getting wet, and light dirt can be removed with a sponge. Now, by following these rules, this can be done without harming the product.
Sneakers that are wet after washing should not be placed on a radiator to dry them - strong uneven heating can damage the shoes. How to quickly dry your sneakers?
- Before drying, washed shoes must be wiped with a piece of cloth to remove excess moisture.
- It should be dried in a well-ventilated, cool room. If you do not follow this recommendation, the shoes will “suffocate”, and then a persistent unpleasant odor will appear in them.
- If you use a hairdryer for drying, you need to select the cold blowing mode.
- The insoles should be pulled out and can be placed on the battery.
Drying methods
There are several ways to dry your sneakers without harming their appearance.
Beumaga
You can use old newspapers, but there is a risk that they will stain the internal surfaces of the products. It is better to take toilet paper, paper towels or any other paper with good absorbency.
Newspapers or towels need to be crumpled into lumps and filled with shoes. Wrap the top of the sneakers with sheets of paper or newspaper. Leave it like this, periodically checking to see if the paper is wet. As soon as it gets wet, replace it with fresh, dry one. The more often the paper is changed, the faster the shoes dry.
Table salt is heated in the oven or in a frying pan, filled into bags or socks made of thick fabric, and placed in shoes. We wait until the salt cools down and check the moisture level of the sneaker inside. If it is not completely dry, repeat the procedure.
Rice
The bottom of the box is filled with dry rice, and shoes are placed on it with the soles up. The box is closed with a lid. After a few hours the products will dry.
Silica gel
Silica gel packets can be purchased at any shoe store. They are placed inside the sneaker and left so that the filler absorbs all the moisture.
From time to time, wet silica gel should be replaced with dry one - this way the shoes will dry quickly.
Silica gel is not a disposable material. After it sits for some time on a radiator or in a dry room, it will get rid of moisture and will be ready to be used again.
For this procedure, you will need a tabletop or floor-stable device with a large frame so that you can hang sneakers on it.
Before you begin, you should spread a towel under the fan so that the flowing water is absorbed into it.
You will also need thick wire and wire cutters. Using a tool, cut two pieces of 15 cm long from the wire, bend them in the shape of the letter S so that the top hook, which will attach the entire structure to the fan grille, is small, and the second one, for holding shoes, is larger.
The sneakers are unlaced, if this was not done before washing, the insoles are removed, and opened as wide as possible - this is necessary so that enough air can get inside.
The prepared shoes are attached to the fan using wire hooks at a distance of about 30 cm from each other. Turn on medium blowing mode and leave for 1 or 2 hours.
Vacuum cleaner or hair dryer
One end of the hose is attached to the hole that blows air, the other is placed in the shoes, and the device is turned on. With this method, the sneakers dry very quickly - a quarter of an hour is enough for 1 sneaker.
If sneakers or sneakers are not dried well enough, your feet are at risk of developing fungal diseases. Damp shoes are their favorite place. In addition, an unpleasant, repulsive odor appears. It is necessary to completely dry your shoes, but not all methods are suitable for this. For example, you should not be near an open fire or other powerful heat source (radiator, heater, gas stove).
Due to excessive overheating with uneven drying, the material from which the shoes are made begins to warp and become deformed. After that, it hardens into hard bumps that will rub the skin of your feet. Sneakers and sneakers need attention after every wear. After all, this sporty look shoes that are preferred by lovers of sports and outdoor activities. The care will depend on how appearance, and the lifespan of the shoes.
Washing shoes is an important part of shoe care. Sports shoes should be washed quite often. This can be done manually or using a washing machine, as you prefer. Before washing, the sneakers are cleaned of external dirt, the insoles are removed and the laces are unlaced.
The main rule: washing should be done in water with a temperature no higher than 40°C without the “spin” and “dry” functions. High temperatures deformed and washed out bright colors, and mechanical stress in a centrifuge can completely damage the sneakers. Sneakers made of leather and suede elements are not recommended to be machine washed. They become very deformed after drying. Most likely, the sneakers will not return to their original shape and will be very stiff. Only membrane models of sneakers are suitable for washing in a washing machine.
But the rules for drying sports shoes various models, in general, the same.
To cope with drying as quickly as possible, you need to follow several important rules:
- 1 The process should take place in a well-ventilated and cool room.
- 2 Before drying, sneakers or sneakers must be without insoles and completely unlaced.
- 3 Never place shoes near heating appliances (oven, radiator, stove, fireplace, electric heater).
A powerful heat source deforms the product. Cracks will appear on it and the sole will begin to peel off. After drying like this, the sneakers will get more and more wet.
Handy methods
- 1 If your sneakers are very wet and cannot dry overnight, the following method will help. Take more newspapers, paper towels or roll toilet paper, push inside. Cellulose absorbs water well. When some time has passed, the paper should be changed to new one. And so 3 or 4 times. Newspapers are not suitable for white shoes. Printing ink can leave unsightly black streaks. When drying, one small nuance should be taken into account: wet shoes made of genuine leather and the suede becomes very vulnerable. Therefore, in order not to overstretch and change the shape, you need to push not too much a large number of paper filler. It is better to repeat the procedure several more times.
- 2 Regular coarse kitchen salt quickly absorbs water. To dry your shoes, heat a pack of salt, stirring, in a dry, clean frying pan. Carefully pour hot salt into two thick cotton socks. Insert hot socks into sneakers, carefully distribute them inside and leave. When the salt has cooled, take out the socks and, if necessary, repeat the procedure again.
- 3 You can fill your socks with rice. Rice also absorbs water well.
- 4 Excellent for drying silica gel. In addition to moisture, it also removes perfectly unpleasant odors from shoes. The recipe is simple: put a few silica gel packets into damp shoes and wait a few hours. You can take this excellent mini-dryer with you to work and on hikes. After the gel balls absorb moisture, place them on a radiator or in the sun. Dry balls can be used many times.
- 5 If you don’t have silica gel in the house, but you have cat litter based on it, this will also work perfectly. As in the recipe with salt, fill cotton socks with balls, insert them into shoes and hold until the moisture is completely absorbed.
- 6 Shoes can be dried using a vacuum cleaner. To do this, the vacuum cleaner hose is inserted into the blow-out hole and placed directly into the shoes. By sucking in air, the vacuum cleaner draws in excess moisture and within 20 minutes can completely dry the material from the inside.
- 7 You can use a fan for quick drying. Attach two hooks to the safety grille. Hang sneakers or sneakers on the hook so that the heel part is at the top. Shoes must be completely unlaced with the tongues extended as far as possible. Turn on the fan at medium speed. After about an hour, the shoes become completely dry from the inside.
Drying devices
Perhaps the best, most reliable and efficient are special electric devices for drying shoes. A regular electric dryer is a pair of twisted frames that fit into shoes. Outdated models are made of metal, while more modern ones are ceramic models in a plastic case.
There are 3 types of dryers:
- 1 Electrical. These are two heating elements connected by a cord and plug to connect to the network. The heating element itself can be placed in a plastic form in the form of a shoe last or simply made in the shape of a loop. When the device is connected to the network, the heating elements provide a sufficient amount of heat, but at the same time do not dry out the inner surface of the shoe or deform it.
- 2 Drying - blower. This is a plastic model that blows out moisture with heated air. Wet shoes are put on special vertical connections, the device is plugged in, and after 3 hours the shoes become completely dry. Some models work not only from the mains, but also from a battery.
- 3 Drying with a bactericidal ultraviolet lamp. The most advanced model. It not only dries shoes well, but also kills all kinds of bacteria and fungi. Some models are equipped with special deodorizing plates. Manufacturers claim that after using such a device you can get rid of fungus. Most likely, drying does not cure, but it would be useful to use it as a preventive measure.
Modern electric shoe dryers do not overdry shoe material and consume a small amount of energy and do an excellent job with their main task. Therefore, such a device must be in every home. Dry feet are the key to health, comfort and good mood.
