To loved ones and friends. Don't know what to give to your loved ones? Let's make a symbol next year- cockerel. Maybe he can give us some advice and direct our thoughts in the right direction.

We will need these materials:
colored paper 3 colors:
- pink,
- yellow,
- blue,
- black,
- white,
sharp scissors,
red felt-tip pen,
glue stick.

Manufacturing steps:
1. Cut out a circle and a small rectangle from yellow paper.

2. On the circle, make a straight cut to the middle. Roll it into a cone and draw diverging circles from the center with a felt-tip pen. We have the body of a cockerel.

3. Connect the cut out yellow rectangle long ends. As a result, we get a cylinder - the head of a bird. Glue it to the body. Now let's make a ridge. Cut out several strips from pink paper different lengths and 1 centimeter wide. We take 3 strips of different sizes and connect the ends of each facing each other. We fasten them together and glue them to the bird's head.

4. Now it’s the beak’s turn. Take several short pink strips and glue the ends of each strip facing each other. Glue the resulting strips in the center of the cylinder, placing them on top of each other.

5. From white and black paper we will make eyes by cutting out circles and glue them to the bird’s head. We will also make eyelashes - we will make frequent cuts on 2 small pieces of black paper with scissors. Use glue to secure the eyelashes above the rooster's eyes.

6. Let's make wings: cut out 2 long strips and 4 shorter ones from blue paper. We fasten the ends of each with glue, then glue 1 long and 2 short ones on each side of the bird’s body.

7. All that remains is to make the fluffy tail of the rooster. Cut the pink paper into long strips. We glue one end of each strip to the body of the cockerel in place of the tail, bend the other end with scissors, then cut it lengthwise, without bringing the scissors to the end of the strip.

How to make a rooster out of paper.

"Basket".

Children make this craft in kindergartens during preparation for Easter. However, no one forbids doing it at any other time. This basket looks beautiful and original.

Necessary materials:

Brown, orange or yellow paper (the square should be 20 cm on a side)
- scissors

Stages of work:

Bend the square in half and straighten it out. At this stage it is necessary to outline the middle line. Fold the sides towards the center and turn them over to the other side. Bend the top paper towards the middle. Do not bend the paper at the bottom. Turn over to the other side. Fold the bottom and top sides towards the middle and unfold. Turn over to the second side again. Bend the bottom and top sides to the marked lines. Open and flatten the pocket. Bend the craft on 4 sides.

Paper rooster: cutting templates

At the same time, fold the figure along the marked lines. The corners should be down. Lift up the outer part of the corner. Do all this very carefully so as not to tear. If necessary, open the sides slightly. Please note that you need to raise two corners - on each side. Fold the strip down from the bottom. Do the same step on the second side. Open the bottom of the box. Move the side corner inward. Make a comb, beak and beard from red paper. Glue the wings to the side folds. Glue the tail to the side corners on both sides. Make the handle of the basket from paper folded in half. Glue it in the middle. The basket may not work out the first time, so you need to practice.

What do you think? This is a great option for decorating your home ahead of the holidays.

How to do modular origami"Cockerel."

The body of the bird is made from modules of white, red and yellow color. Before making the craft, carefully straighten each module so that they are not voluminous and sharp, so that the body turns out to be round.

1 rub. – 8 w. + 12 b. – close the row into a ring
2 r. – 9 w. + 11 b.
3 r. – 8 w. + 12 b.
4 rub. – 7 f + 13 b.
5 rub. – 6 w. + 14 b.
6 rub. – 5 g. + 6 b. Leave 6 white corners free

Now you need to start creating the wings and tummy. Leave the space under your back free. Turn the work with the yellow modules towards you. The wings will be assembled on both sides of the yellow modules.

7 rub. – 4 b. + 1 k. On the other hand, you need to assemble the wing in exactly the same way, in a mirror image.
8 rub. – 4 b. + 1k. + 7f.
9 rub. – 3 b., 2 k., 1 b. + 6 w.
10 rub. – 3 b., 2 k., 1 b. + 7 w.
11 rub. – 3 b., 2 k., 1 b. + 8 w.
12 rub. – 7 f., skip 2 modules, 1 b., 2 k., 2 b.

The belly and wing are made separately; they are not connected to each other.

For the tummy:

13 rub. – 6 w.
14 rub. – 7 w.
15 rub. – 6 w.
16 rub. – 7 w.
17 rub. – 6 w.
18 rub. – 7 w.
19 rub. – 6 w.
20 rub. – 5 g.
21 rub. – 4 w.
22 rub. – 3 w.
23 rub. – 2 w.
24 rub. – 1 g.

The belly is finished. Go back to creating the wings.

13 rub. – skip 1 point. module, 1b + 2k. + 2b.
14 rub. – skip 1 point. module, 1 b. + 2 k. + 1 b.
15 rub. - skip 1 point. module, 1 b. + 2 k. + 1 b.
16 rub. - skip 1 point. module, 1 b. + 1 k.
17 rub. - skip 1 point. module, 1 b. + 2 k.
18 rub. - skip 1 point. module, 1 b. + 1 k.
19 rub. - skip 1 point. module, 1 b.

Return to creating the back (6 free modules)

7 rub. – skip 1 b., 2 b. put on the short side so that 1 module remains free.
8 rub. – 3 b. short side
9 rub. – place one module on each corner (6 modules)
10 rub. - 5 B.

Strips of other modules (tail) will be attached to 5 corners.

The corners to create the neck also do not need to be straightened. Assemble the neck development (the modules should not be assembled into a ring). The modules must be inserted with the short side.

1 rub. – 5 g.
2 r. – 6 w.
3 r. – 7g.
4 rub. – 8 w.
5 rub. – 1 b. + 7f. + 1b.
6 rub. – 2 b. + 6 w. + 2 b.
7 rub. – 3 b. + 5 w. + 3 b.
8 rub. – 4 b. + 4 w. + 4 b.
9 rub. - 4 b. + 3 w. + 4 b
10 rub. – 4 b. + 2 w. + 4 b.
11 rub. – 6 b. + 2 w. + 4 b.
12 rub. – 8 b.
13 rub. – 7b.
14 rub. – 6 b.
15 rub. - 5 B.
16 rub. – 4 b.
17 rub. – 3 b.
18 rub. – 2 b.
19 rub. – 1 b.

The front side will be on the side of the short corners. On the side of the long corners (back surface) you need to make 4-5 rows. There is no need to reach the top. Apply glue thoroughly and leave for a couple of minutes for the craft to dry. Fold the development towards the center. In this case, modules 8 and 13 must be connected. Hold until the corners “grab.” To prevent the seams from coming apart, additionally lubricate it with a layer of glue. Squeeze tightly again. You will get a “seam” on the back side of the craft. Bend 4-5 corners at the top to reverse side. The head is made from several modules large sizes. Place it on the top of your neck. Glue the neck to the body. Make strips from the modules - this will be the tail. Modules in strips must be glued together. Glue the finished strips to the 5 open corners on the back.

Consider and. Your kids will simply be delighted with it. It is easy to do and looks very impressive.

Here is another application option.

Put it on paper paper rooster template. Cut out the legs, crop, beak and head one by one. Trace your palms on colored paper, cut out the details for the feathers and comb.

Crafts made from paper egg trays also look very original. To create this craft you will need several egg trays. Cut out the feather pieces and cut them out. Twist the beak and cut out the scallop. The torso is made from the torso. inflate balloon, cover it with paper pieces. Let it dry thoroughly. After drying, cut paper ball into 2 parts, attach with different sides tail, wings and head. The final stage is coloring the cockerel. To do this, prepare multi-colored paints and a brush. Leave the craft for a while to dry.

If you can knit, consider . We are happy to provide you with only the best options.

The cockerel is a bright bird that loves everything colorful and noticeable. That is why on New Year’s Eve you need to decorate your home “to the fullest.” We have prepared for you the most the best master classes that will help you cope with this task. Some crafts (for example, a basket) can be left for Easter. You can put it in Easter eggs and put on festive table. A cockerel made from paper trays will also be an excellent stand for holiday treats.

Get involved in creating kids. Making crafts with your own hands is a great way to develop not only creativity, and fine motor skills hands In addition, this process unites. And given that we live very active life, it is very important!

Craft for children: paper cockerel. Five master classes for preschool and younger children school age With step by step photos and creative tasks.

Craft for children: paper cockerel

In this article you will find five options for making crafts - a cockerel with children of preschool and primary school age.

Master class 1. Craft - cockerel based on a cone

In the first master class, the children and I will make a toy - a cockerel - very simply and quickly. Finished craft It can be either a toy for the Christmas tree, or a toy for dramatizing a fairy tale, or just a gift - a souvenir. Even kids can do it together with adults.

Tools and materials for making paper cockerel

To work you need to prepare:

• yellow and red colored paper,
• multi-colored strips of paper for quilling (you can use ready set or cut them yourself from colored paper),
• glue stick,
• black felt-tip pen,
• scissors,
• pattern - circle.

Step-by-step description of making crafts

The base of the cockerel should be made from half a circle. Any round form, which can be traced onto paper: a tea cup, a lid or any jar. Decide for yourself the size of the toy.

Step 1. To make the blank, draw a circle of the size you need on paper (I used the lid from a jar of hand cream as a circle template). Cut out a circle and cut it in half.

Step 2. Twist a cone from half a circle and glue it together.

Step 3. Cut out from red paper:

• two parts for a cockerel comb,
• detail of the rooster's goatee in the shape of an inverted heart (you need to cut out half of the detail along the fold),
• part for the beak (we also cut out half of the part along the fold in the shape of an equilateral triangle; when you unfold it, you get the shape of a rhombus).

By the way, we drew these details by hand, by eye.

Step 4. Lubricate the upper part of the cockerel comb parts with glue halfway and glue them together. Then bend the bottom part of the part and coat it with glue.

Step 5. Glue the parts onto the craft.

• Glue the resulting scallop blank onto the cone.
• Glue the beak and beard parts onto the cone.

Step 6. Make a rooster's tail from strips of paper and wings. For this:

— Cut multi-colored strips of paper 10 cm long, fold them in half and glue 3-4 different colors together. These are the tail parts

— Wings can be made in a similar way, only smaller in size. Or you can simply glue short strips together and slightly twist the edges, giving them a concave shape.

Step 7. Finish the design of the craft.

— Glue the resulting blanks to the cone in the area of ​​the tail and wings of the cockerel.

— Draw the rooster’s eye with a black felt-tip pen.

The cockerel is ready. If you want to hang a craft, all you have to do is thread a thread through the comb, make a loop and hang the toy on the Christmas tree.

Creative tasks for children

It is very important that a child, having mastered making crafts based on a cone, learns to come up with his own versions of similar crafts according to his own plans, changing the details.

Think and discuss with your children:

• What animals can be depicted using a cone?
• Which Christmas decorations can it be made based on a cone?
• Try to make yourself, based on the cone, toys of Santa Claus and Snow Maiden or others that your child wants to invent and make.

Creative success to you!

Master class 2. Cockerel - bookmark for books made of paper

In the second master class we will learn how to make a cockerel together with the children, which will be a wonderful gift. It can serve as both a toy and a bookmark. Children of senior preschool and primary school age can make such a cockerel together with adults.

We will not just make crafts, but also try ourselves as a designer! So let's begin.

Tools and materials for making a cockerel

To work you will need:

• double-sided colored paper,
• any glue,
• black gouache and brush,
• scissors.

How to make a cockerel: step-by-step description

Let's imagine a little and test ourselves in the role of a designer in making a craft - a cockerel made of paper.

Step 1

First, let's work with the template. We need to cut out such a pentagonal blank from paper of any color according to the template (see photo below).

Step 2

Like any designer, you and I must be able to use the tool. Our tool will be a ruler.

— Place a ruler so that the angles align along it: the top of the pentagon and the right corner at the base.

— Pressing the ruler tightly against the workpiece, lift its right corner up.

This is how it should turn out (see photo below).

Step 3.

Fold the left corner of the pentagon up in the same way.

Step 4. Cut out and glue the details of the craft.

- The beak, legs and comb of the cockerel can be made according to the template. But the children and I decided to express ourselves each in our own way and cut out these details without a template, but independently, whoever could and whoever came up with it.

— And the beard can be made in the shape of a heart and glued by turning it upside down.

— Glue the folded edges of the cockerel body blank together. Glue the comb and paws to the workpiece.

- Using the back of the brush, use gouache to put 2 dots - the rooster's eyes.

And already the image of the cockerel appears!

Step 5.

— Glue the beak (it is made in the shape of a rhombus or can be flat, triangular shape).

- Glue on the beard.

And now the mischievous cockerel is ready!

Step 6.

If you want to hang a craft, you need to thread the thread through the comb.

You can also make a bookmark from this craft. To do this, you need to cut out a strip of paper and stick the resulting toy - a cockerel - on it. Daryana and Vika wanted to make bookmarks. This is what happened with the children.

Creative task for children

— What other image can you come up with using the pentagon template as a basis?

— Try to make a toy based on the model and come up with a new image yourself.

Good luck in your creativity!

Author of the first two master classes: Vera Khiglod, technology teacher, head of the children's club artistic creativity, a regular reader of the “Native Path” website. The article presents photos of crafts made by Vera’s little pupils - children preschool age from her studio.

Master class 3. Cockerel made of paper using the origami technique

This cockerel is more complex craft for school age children. It is made using the traditional origami technique from a large square of paper measuring 20 x 20 cm. The detailed sequence of making such a cockerel is shown in the video. This craft is intended for beginners in the origami technique - try it!

Master class 4. Craft - a cockerel with a surprise

This is a basket designed like a toy cockerel, made of paper. You can put sweets, gifts or surprises in it. Very interesting craft and a clear description in the video. Video taken from the youtube channel “CreativeClub”.

Master class 5. Cockerel made of self-adhesive paper

The cockerel is a traditional children's craft, the hero of many children's songs, fairy tales and games. We hope that the options for cockerels from this article will help you make crafts with your children and get pleasure and joy from it. We wish you creative success!

Or on the course cover below for free subscription

Necessary materials:

Scissors
- a set of colored paper
- box
- PVA glue

Stages of work:

Prepare boxes of various sizes. Cut off the part that covers the box from the box, make cuts along the fold lines (they should be ½ the height of the box itself). Bend the parts of the box along the cuts. The two opposite parts will be the wings, and the rest will be the tail and head. Round the wings. Cut the tail down to the very base. Cut the head, moving from the top to the very base, to create a triangle shape. Decorate the craft: make earrings and a comb.

DIY cockerel craft

You will need:

Plastic bottle – 3 pcs.
- yellow ball from a dry pool
- red and yellow plates
- red and yellow disposable cups
- black marker
- stapler
- simple tape
- double sided tape

Work process:

Cut off the top parts of 3 bottles and fasten them together with tape. Cut disposable cups along the edge. They must be attached to the rooster's neck using tape. Colors must be alternated. Cut off the edge of disposable plates and make cuts on the inside. As a result, you have feathers. Gather the tail and feathers with a stapler. Insert the tail into the cut. Cover the connection point wrapping paper. The wings also need to be cut from disposable plates. Attach the head with double-sided tape. Cut out the comb, beak and beard from red disposable plates. Insert the cut pieces into the cuts on the head. Eyes are also created from disposable plates.

DIY Cockerel 2017

You will need:

Beads for eyes
- hot glue
- egg cartons
- primer
- acrylic paints
- balloon
- old newspapers
- scissors
- 2 beads
- PVA glue

How to do:

Two cones from a tray from egg eggs cut, cut one side of each cone. Connect the cut cones with the cuts facing down. You will end up with one large cone with 4 petals. To create the neck and head, connect 5 cones together. Towards the top they will expand and become larger in size. Cut a comb from the side of the tray. Cut out a beak from the lid, which will consist of two parts. Feathers are also created from cones. They are fixed on top of the cardboard with hot glue. The length of one wing is 15 cm. Make blanks for the tail in a similar way.

The next stage is creating the paws. From copper wire bend the shape of the paws. In order to give the desired effect, twist the corrugated tube. Insert the remaining tail between the corrugated and metal tube. For strength, fill the lower part with glue. Cut the claws from the bottom. They should be long and narrow. They need to be secured with glue. Paint the legs and torso with spray paint.

Prepare a utility knife and construction foam. All cuts should be neat and even. You can cut out the parts separately. Finally, glue them together with glue. Bring to the desired shape You can use sandpaper. Additionally, treat with acrylic putty, wait until it dries completely, plaster again and treat with PVA glue. This will allow the paint to adhere better.

Start coloring from the head. Glue the eyes on the head. To create a beautiful scallop, make a pattern on paper, transfer it to polystyrene foam, cut it out, and glue it to a suitable place. Start preparing the mold for the wings. Leave the back open. Cover the upper part of the wings with feathers made from corrugated bottles. Fold the last row inside the wing. Paint over it, leave to dry, attach with perforated tape and a self-tapping screw. Make a tail. Take the mesh and bend it. Cut feathers from bottles. Paint them separately on both sides. Apply black first, and then a little blue. Attach the feathers with wire to the mesh. Once the paint has dried, cut the feathers into two more pieces to make the tail appear even fuller.

You will like it too.

For the back, cut feathers from a clear bottle. The width of one feather should be approximately 2-2.5 cm. Attach them to the back, 3-4 pieces at a time. Use self-tapping screws for fastening. When you fix the feathers on the neck, cut off the top part. Glue the last row of feathers to hide the screw heads. Glue smaller feathers in the back of the head and on the side of the crest. Cover all parts that you painted with construction tape and bags. First apply the yellow paint and let it dry. Add a few orange stripes.

The finishing touch is blinders. Cut 2 strips, make a cut with a stationery knife. Insert them between the metal-plastic and corrugated pipe. Paint the craft with yacht varnish.

How to sew a cockerel with your own hands

You will need:

Cardboard
- threads, scissors
- orange, blue-green, black and white fabric
- tweezers
- cotton wool
- scotch
- glue
- colored paper

Stages of work:

Draw a sample of the toy on a piece of cardboard and cut it out. Draw the wing separately, cut it out, and see how they look. Cut the sample into separate parts so that it is more convenient for you to work further. Match each piece of the sample with a separate piece of fabric, cut out each piece in turn from the fabric. There should be 2 of each part. Cut the head from white fabric, the upper part of the wing and body from blue-green fabric, and the lower part of the wing and tail from black fabric. Make the beard, paw, beak, comb and eyes from colored paper. Sew all the details for the head. Sewing the comb can be a little difficult. The fact is that it is wider than the head. It is better to sew it on the outside. Glue the eyes from colored paper.

DIY cockerel costume:

For the body, make allowances of 1.5 cm. Connect the parts from the inside. Sew the tip of the foot inside. Sew the wings on the outside, put soft filling inside. If you don't have it on hand, regular cardboard will do. Sew the bottom half from the outside, sew it to the body, and connect it through the cardboard with a seam. Try the torso to the head. Sew the neck to the body. Fill the connected parts with cotton wool. You need to fill it through the hole in the tail. The hole is very small, so you need to fill the craft with cotton wool in small portions. You may need to use tweezers. Sew the details of the tail using an outer seam and fill it with cotton wool.

The paws can be made from cardboard or a piece of fabric. Choose your fabric the right size and colors, make some square pieces. Trim the ends and sew the oblong legs. Fill with cotton wool. Sew the legs, wings, and tail to the body. Cut without touching the seams. The do-it-yourself cockerel toy is ready.

DIY paper cockerel.

This is the easiest way to create crafts. There are several ways. You can use origami, quilling, cutting with scissors, etc. techniques. Paper craft You can put it or hang it on a Christmas tree, stick it on a window, or decorate a holiday table. An excellent solution is the decor of napkins. It will look quite restrained and at the same time original. If you use origami, then the napkin can be immediately folded into the shape of a cockerel. We will provide you with the diagrams.

DIY cockerel patterns.

After all, the Rooster is a symbol of the coming year, its image should be located at the place of celebration. Ready-made stencils allow you to short time make a lot beautiful jewelry, just attach it to the paper, trace it and cut it out. Sometimes these come from several parts, which after cutting are glued together, giving the decoration volume.

The New Year is gradually approaching and people are starting to prepare. They have a lot to do, and they should start with decorating the room chosen for the holiday. Work rooms are also often decorated, because you want to bring the spirit of the holiday everywhere. There is one last push left before the New Year holidays, when you can rest properly. And of course, celebrate!

Stencils: snowflakes, Christmas trees, Rooster

You can choose a ready-made Rooster template and download your favorite pictures from the network. For the outline you need special ones, with holes along the contour, so that you can repeat the silhouette on other sheets. Stencils like these are used all the time. After all, you need to decorate windows, doors, and sometimes walls. It’s faster to make from paper with your own hands and the results will be multi-colored and beautiful.

If the size of the window allows, you can cut out several characters and turn the window into a real picture, where the glass will be the canvas to which you attach the cut out figures. Bring to life any story from New Year's tales or come up with something of your own. You can print ready-made stencils of different figures from the Internet, there are a great variety of them.

You can download many rooster stencils by clicking on the link!

What are there

Stencils have been around for a very long time. They are used to obtain identical images or inscriptions; schoolchildren used stencil rulers and special sheets with holes, by painting which they could obtain any letter from the alphabet or a number written in printed font. This helped to format abstracts beautifully and smoothly, make posters or drawings.

More often there are templates of different animals, fairy-tale characters - you name it. A stencil is an image made of paper or other material with special recesses and holes, which can then be transferred as many times as desired to another material. Just circle with a pencil or pen. In production and creativity, such templates are constantly used. Ordinary people are looking for stencils to decorate their rooms, offices and other spaces. After all, this is a simple, affordable and fast way.

Similar templates are used to transfer designs onto mugs and other dishes using a vice with high temperature. Then the contours of the stencil are then displayed on the surface, forming indelible patterns.

Decorating a room is always more fun with a child or the whole family. This creative process, when sheets of paper are scattered, everyone is armed with pencils and scissors. When thinking about how to decorate a window, do not use glue. Then he will leave it on the glass ugly stain, which will have to be washed with a rag. Better take a small piece of tape. Its pieces are completely invisible from the outside. After all, you don’t need to “tightly” attach the figures.