Ribbon embroidery - very popular view. And this is justified, making a picture with the help of ribbons is easy and simple, even a child can handle it, and the result will exceed all expectations. After all, embroidered patterns look very cool and beautiful. Such embroidery can not only create paintings or panels, but also decorate clothing items And interior. For example, tablecloths, bags, favorite dresses or blouses.
Usually, various flowers are chosen as motifs for embroidery, but roses are especially common. It is this pattern that will be discussed in this master class for beginner needlewomen.
In contact with
Master class for beginners, getting ready to embroider
Before you start embroidering, you should prepare all necessary materials and tools for the job. In order to embroider roses you will need:
- Textile on which to embroider. It can be anyone, but it is better for novice craftswomen to take a canvas.
- Needle with a sharp end and a large eye. If the embroidery will be done on the canvas, then you need a needle with a blunt end. It is more convenient for her to work on such fabric.
- Ribbons any will do: size, material, color - choose to your taste. But keep in mind, the most suitable size is considered to be ribbons about two centimeters wide.
- Threads, in some types of embroidery, thread is used to secure ribbons. Choose the most similar in color to the ribbons. Otherwise, the embroidery will look sloppy and clumsy.
Basics of embroidery
Most likely, at first you will experience difficulties in the formation of flowers. Video tutorials will help you understand everything.
Pattern embroidery
Experienced needlewomen, when working on paintings, use special schemes. They are transferred to the fabric and used as an outline for embroidery. For many beginner needlewomen, this approach seems too dreary and redundant.
Try this method when embroidering a small picture. Transfer the design to the fabric using a piece of crayon or a bar of soap. You will immediately notice how much easier it is to work. You will know exactly where a certain flower should be, as well as what size the elements should be.
We bring to your attention simple schemes for embroidering roses with ribbons. Perhaps you will like any of the paintings and you will bring it to life.
Patterns for embroidering roses on fabric
Do not underestimate the role of video tutorials when learning rose embroidery techniques. In this master class, the author embroiders on fabric. See how much easier it makes the job, and draw conclusions - is it worth it for you to spend time transferring the pattern of the picture to the fabric or not.
Roses for beginners
If you want to make a picture with roses from ribbons, but you can’t cope with embroidery or just don’t have the desire to learn the techniques of execution, try this easiest way. It is suitable for absolutely everyone - children, beginner craftswomen, people who do not know how to do with a needle and thread.
To create a picture you will need:
- Imagine how the finished picture should look like, mark the points on the fabric where the buds, flowers and leaves will be attached.
- Roll from ribbons desired colors required amount buds and roses. Sew them, lightly burn them from below and sew them onto the canvas.
- Cut out leaves from wide ribbons. Finish the edges with a lighter, sew to the canvas.
The picture is ready.
To diversify the composition, a picture with roses can be decorated with ribbon loops or ribbon knots.
Don't forget to watch video tutorials. They explain and show step by step how to quickly make beautiful roses from ribbons.
Roses made in this technique are more voluminous than flowers made in the previous way. Watch the video tutorial in order to better understand the technique and see it visually.
Thread embroidery
This version of rose embroidery is also suitable for beginners. When using this technique, twisting the buds is not required, roses are embroidered directly on the fabric. For this:
- Fasten the thread to the fabric and make five stitches of the same length, in different sides from the place of fixation, like the rays of the sun. The size of the stitch will determine how magnificent the flower will turn out.
- Bring the thread to the right side in the middle of the "sun" and start embroidering it in a circle, under and over the stitches.
- Do not tighten the embroidery too much, the flower may be squeezed.
- Instead of a thread, you can immediately use ribbons.
How to embroider kanzashi roses with ribbons
Kanzashi- art that came from Japan. And this is noticeable - kanzashi roses do not have rounded petals, as in most techniques, but voluminous and pointed. They are somewhat reminiscent of flowers created using the technique, but not from paper, but from fabric.
A rose embroidered with kanzashi ribbons will decorate any picture. Let's move on to step by step lesson for the manufacture of kanzashi roses.
You will need:
- wide satin ribbons;
- tweezers;
- glue.
Let's get to work:
The flower is ready. The size of a rose directly depends on the number of petals. The more petals you used to make the rose, the bigger the flower will be.
Make the required number of roses and you can proceed to composing compositions. Sew flowers onto the fabric, sew with ribbons if necessary. Decorate with leaves and knots.
If you are interested in this technique, watch the video tutorials on creating kanzashi flowers. From there you can get the necessary information and visually trace the creation of roses.
Embroidery roses step by step
At the end of the article, we suggest that you familiarize yourself with step by step photo instructions for embroidering roses on fabric.
- Prepare the tools for work, you will need: ribbons, fabric, hoop, needle with a large eye, extra. needle, thread, scissors.
- Thread the tape into the needle.
- Now you need to fasten the other end of the tape. To do this, bend it into a loop and sew it like the middle of a rose.
Attaching the end of the tape
- Set the workpiece aside. Take a small piece of tape and fold its top left edge down at a 90 degree angle. Make several turns around the base, forming the petals of the bud. Fasten the threads. You should get a small rose.
Bud
- Trim excess fabric from the base of the bud and sew to the fabric.
- Take the needle, with the ribbon tucked in, and begin to form the petals around the sewn bud.
We sheathe butoe
- The petals should fit snugly together. Then you get something like this.
- To make the rose lush, make the second row of petals.
Second row
- We make several petals more magnificent by sticking a needle over the ribbon.
lush petals
- Now it remains to fix the material of the flower on the wrong side and the rose is ready.
The most popular type of decor are roses. They look great on clothes, bags. Handmade paintings are gaining immense popularity among different ages. This type of creativity opens the ability to fantasize, both in children and adults. You can also experiment, learn and discover new possibilities. On request, you can choose any color scheme.
On many sites, masters share their impressions, tips, secrets. Using their developments, we will avoid our own simple mistakes. In the beginning, you will need a template, a satin ribbon of the required length, accessories in sets. Dear needlewomen, given step by step master class teaches you how to embroider with straight stitches. They are of two types - straight and lateral. Most often, mistresses choose such tones as cream, yellow, orange, burgundy, pale pink, sometimes red and white. Ribbon embroidery roses and the whole idea of a still life depends on your imagination.Simple rose embroidery
Accessories and materials for embroidery
- Canvas, base fabric
- hoop
- Ribbons
- Scissors
- Multi-colored threads
- Two needles: one tapestry with a large eye and the second - a regular sewing thread
For starters, you can use any fabric, color too. For beginners, it is better to take a canvas, since it is easier to learn from it. In the future, you can already choose the basis best quality so that the composition can decorate your interior or a gift that could pleasantly surprise others. It is necessary to fill in a stretch, in the hoop. They can be rectangular or round. We embroider a rose from a satin ribbon.
This activity is quite simple, the main thing is to have patience. And things that, in your opinion, have outlived their own, can be decorated in the same way as in the figure.
You will find one of the examples for beginners in our section. Schemes for creating a future picture can be selected on the Internet. Photos of finished products amaze with their magnificence.
Bud creation technique
Embroidery of roses in two steps. First, a twisted middle is made, and then the outer petals are embroidered. The tip must be inserted into the needle, and then gently twist it with a roll. The bud of the future flower must be stitched periodically so as not to fall apart. Use red for this work.
The next stage is fixing the bud and creating voluminous petals around it.
The number of petals affects the pomp of the flower. The more of them, the larger the rose will turn out.
The core and outer petals of the flower
For the twisted middle, you need a ribbon 2.5 cm wide, you will also need a needle and thread in the same color. A small amount of cut off, about 1 m, tip - 3 centimeters right hand we bend it towards ourselves at a right angle (it doesn’t matter which side to start from - from the front or from the wrong side), it will still spin. Then we bend again, then put the fingers of the left hand - the index finger lies on the upper edge, and thumb under the bottom
We bend the top edge under the bottom, pull out the thumb, and a small triangle is formed. Now with the right hand we tightly twist it towards ourselves three times, aligning along the upper edge.
We sew the center of the inflorescence with a needle and thread, all the turns. And so we spin to the end of this geometric figure, which was formed on the left side during the bend, that is, turned - flashed. The first is always tightly twisted. As soon as the tape was fixed with a needle to the end, the fingers were again placed correctly - the index finger on the upper edge, and the large one under it. We bend the next triangle. And now you need to twist more freely, the petals seem to deviate from each other. We repeat the same process of twisting and flashing with each turn. A new coil is fixed with a needle, turned again and stitched.
The next one is laid even more freely. A properly laid out ribbon is guaranteed to be an elegant creation. When many layers are wound, you can no longer pierce this bud with a needle, but only pick up a new coil to the bottom one. We twist the bud so that the diameter of the rose becomes 25 millimeters.
Detailed video lesson for needlewomen. Just five minutes and the rose is ready.
Where there was the first bend, there was a small tip. This is where the process needs to start. We pierce a hole in the middle of the base of the fabric with an awl. We insert the tail of our flower and send the needle and thread to the wrong side there.
From the wrong side, it is necessary to stretch the tip so that the rose fits snugly against the canvas. We fix it with a thread and then cut off the excess along with the thread.
Now we thread our tape into a large needle with a wide eye. If you look from above at the bud, which is embroidered and inserted into the canvas, it will become clear in what sequence the petals need to be twisted and stitched, that is, we twist in a circle.
We twist the tape into a soft fold and pierce it under the petals. On the wrong side, we retreat 2 millimeters, bring the needle to the front side of the fabric, and again create a soft fold. We repeat the puncture under the turns of the flower and make sure that everything is tightly and neatly packed. Between already stitched gaps should not be visible. You need to be careful when installing. Try to make them look pretty, turn the turns as you like, the tape should fit as it should.Further, after two petals, the third turn must be sewn differently. We advise you to pay attention to the jumpers that turned out when piercing the main working material (there is a distance of 2 mm between them). They must be covered with a third petal.
So, from the jumper we move 1.5 cm to the right. We twist the ribbon into a soft fold and pierce it. We sew the fourth petal further, retreating from it by 2 mm. Thus, we lay them in a circle. We form the fifth turn of the rose, while not forgetting to overlap the jumpers. Immediately correct, tighten and stack them, then it will be difficult to do. And we make sure that the level is the same. In this sequence, step by step, we sew eight blanks.
Reception "from the ninth petal"
As soon as we have reached the stage when they are all long, we apply our new technique. It is necessary to pierce not 2 mm forward, but we are already taking a step back by about 1 centimeter. We determine the length ourselves and, accordingly, introduce the needle. We form the coil correctly so that it lays down beautifully, again we pierce 10 millimeters back - the tenth. Our flower consists of approximately 11-12 turns. At the same time, we determine the length visually. The size of the bud should already look rounded, lush and wide. At the last stage, finishing stitching, be sure to pull it up, straighten all the petals you embroidered, and make a knot on the wrong side. The flower is ready.
If you are already interested, then be patient and work hard to get a good result. Then you will gain victory and become the author of your own composition.
Satin ribbons
It is easiest to start with thin ribbons, since this is the most. They can be purchased at any specialized store. They are subject to special requirements: they should not be tangled and twisted when working with them. Loops must pass freely through matter. Give preference to goods made of silk or satin. This material effectively shimmers in the light and the work has an unsurpassed appearance. Multi-colored satin ribbons (white, yellow and green) 1 m long, 0.5 cm wide
base fabric
We will work on a tight basis. If you are a beginner, then to get an even and smooth drawing, it is better to use canvas.
hoop
When choosing them, give preference to larger sizes so that the whole picture fits in them. When the canvas is strongly stretched, then it will be easier.
Threads
Cotton threads are best because they do not shed and will not lose color in any way. Purchase high-quality floss or iris threads in different colors to create a composition. With them you will supplement the main details.
Needles
They should have large ears, as we will need to thread a wide ribbon. For example, tapestry, with a number from 16-18, is used if the tape size is 1 cm. But with a needle with a number from 18-22, they work with a ribbon having a width of 7, 9, 12 cm. Number 24 is used to work with 3 mm. It is also necessary to purchase a standard needle for ordinary sewing.
Scissors
Be sure to get sharp small scissors, and large ones are needed only for cutting.
Initial stages
First, prepare the tape so that one edge is cut at an angle of 90 degrees and singed with fire, and the second tip is cut obliquely - this is what must be inserted into the ear:
It is important to learn to fix. One of the edges, cut at a right angle, needs to be folded by about 3 mm and then, piercing it, get a knot:
If everything worked out, you can start creating. All information, diagrams, can be found on the Internet or picked up in a store. Ready Ideas professionals will be a godsend for beginners.
The path to a masterpiece always starts with basic knowledge. Throwing simple loops, knots, cobwebs underlies the most complex technique. For example:
cobweb
Take a separate piece of fabric and practice fastening and making straight stitches on it:
I would like to mention the “Japanese stitch” method. Here there is a certain similarity with a straight seam. Its peculiarity lies in the passage through itself and through the fabric. First you need to pierce the tape itself, and only then the base. In this way, you can get original compositions of flowers and leaves:
japanese stitch
Experiment. Let the flowers fall on the material with voluminous airy buds, and small thin petals will sparkle on the canvas with the smoothness of silk threads. Butterflies, dragonflies and bees will not only give naturalness, but also breathe life into it.
We embroider dandelions
It is not difficult to work with a dandelion image. Such a simple creation can be the first in your photo gallery. To draw the scheme, use a thin, discreet pencil so that you cannot see the original sketch on the finished work.
It is advisable to choose a dark material. This will give clarity to your drawing. Firmly fix the fabric with a hoop and transfer the image. Her traces are faintly visible on a dark background, but this will be enough to work with the general outlines of the picture.
If you wish, you can transfer the dandelion pattern in another way: cut out a paper sketch of a flower and put it on the fabric. This technology of transferring all the details of an object is much simpler:
Embroidery technique
- Now let's take the base. Select threads suitable colors and sew straight seams along the outlines of the intended pattern:
2. The tape is output to the front side. It is necessary to wrap it around each seam prepared in advance, that is, we pass under the straight stitches made. The method allows you to get a narrow twisted stem in the future picture:
3. Japanese stitch is used to form leaves. We pick up the bottom edge and form a straight stitch. You should get a pointed leaf:
4. Let's start creating seed umbrellas of our dandelion. We embroider with white according to the stem principle, and it is better to display white hairs with an ordinary sewing thread.
5. The second dandelion, which has already blossomed, is embroidered in yellow and applied Japanese art, around the flower:
6. And at the end of our creation process, the last element remained - a jagged leaf. Tip: you can cut a leaf out of a wide ribbon yourself and sew it on, or you can not cut it out. For example, from a narrow green ribbon, we perform a straight long stitch from the stem twice, so that between them there is, as it were, a leaf vein. Then with a dark green thread we will create natural look these veins:
Use your imagination, change the size of the stitches, try to be neat in your work and not clutter it up with unnecessary stitches:
Decorate ready product beads. So you give originality and originality to the creation. Fantasize!
Needlework as an aid in development
This type of creativity is in demand not only among girls. It is perfect for their modern mothers and advanced grandmothers. Each generation will find its positive aspects in this hobby:
- development fine motor skills and as a result of mental formation
- spatial thinking
- imagination
- sense of taste and style
- diligence and diligence
- diligence and attention
- perseverance
From a psychological point of view, it
- finding a way to self-assertion
- release of energy through the hands
- finding inner harmony
- making friends with interests
Such skills develop the child and fill the heart of the older generation with joy. Working together brings all family members together.
Embroidery with roses for inspiration
MASTER-CLASS OF EMBROIDERY OF ROSES
Roses are embroidered with satin stitch, cross-stitch, beaded and, of course, made from ribbons that look so much like delicate petals. This is what we will do now.
COLLECTED ROSES
Enough simple craft, which is done using the technique of gathering with thread or wire tape. Ribbons of any length and width are suitable for such a rose. To begin with, you can take a four-centimeter-wide tape and practice to approach the manufacture of a flower fully armed. Combining several beautiful multi-colored roses, adding leaves and other decorations to them, you can quickly make a brooch or hair clip.
You can start with a wire tape four centimeters wide, and from 46 to 60 in length. You can make a rose by gathering on wire or using a U-stitch. To make a smaller rose, for example, you need to take a smaller wire ribbon for a brooch (the width remains the same - four centimeters, and the length should be 20-25 centimeters).
ROSES FROM WIRE TAPE OWN HANDS
- It is necessary to expose one and a half centimeters of wire at one end of the tape and connect them together. From the opposite end of the tape, gather on the wire, sliding the fabric to the fixed edge.
- After you get a lush assembly, the remaining ends need to be fastened together. Bend one end of the wire tape (long enough for the flower to hold up) and sew in place.
- Now we twist all the length we have.
- Do not forget to make stitches, this will secure the rows. At the end of the twisting, the raw edge of the ribbon must be folded under the base of the flower and sewn securely.
- All excess tape and wire are removed, and the resulting rose is sewn to the right place or sits on the stem.
U-shaped shirring
- Before laying a line, you need to remove one wire.
- Then, on the rest, the assembly is done. One end of the tape is folded and twisted in the same way as in the previous version. As you twist, it is necessary to secure the assembly with stitches.
- The rest of the tape is folded under the base of the rose and stitched through all layers for a stronger fixation. The rose is ready to be sewn on or planted on a stem.
If you want the rose to look different, when twisting the ribbon, its top edge must be folded down.
BUDS FROM RIBBONS
Small pink and flat buds are made from ribbons 1.5-2 cm wide and 5 cm long. Well suited for a flat composition. For a cup, you need to take a green ribbon 2.5-6 cm. For such small buds, the remains of ribbons are well suited.
- The ribbon from which the bud will be made is folded, gathered tightly and secured with a thread.
- The gathered bud is wrapped with cup tape and sewn together.
- The ends of the bud are cut off, and the bud itself is sewn to the bead or used at your discretion.
FOLDED SATIN RIBBON ROSES
This technique is used to quickly make roses. Folding is a rather difficult technique to master, but, on the other hand, the fastest. Once you've learned how to fold your ribbon at will, you'll want to fold any ribbon you see.
You can practice on a tape four centimeters wide and from 30 to 50 in length. Sometimes, you can simply fold the tape and cut it when it reaches right size roses.
It must be remembered that the edges of the rose should be at the same level so that the center does not bulge forward.
- We bend the tape on the right side.
- Bend across the previous fold again, and then wrap around several times so that you get a twisted center of the flower. Such a beautiful curl will be the secret of the future flower. For greater reliability, you can flash it. You don't need to cut the thread.
- We bend the tape on the left side. To increase the space between the folds of the rose, the center of the bud needs to be slightly rejected. We twist it along the diagonal of the bent tape. To better secure the layers of the flower, they need to be stitched.
- Again we bend the tape on the left side and twist it with a fold around the flower. There should be enough space between the layers for the petals to breathe. Fasten with stitches. This sequence of actions is repeated several times, depending on the size of the future rose. Don't be afraid to experiment. by the most the worst option may be the unraveling of the tape and the repetition of all actions again.
- At the final stage of work, we bend the tape down and sew the raw edge to the base of the flower.
- The excess tape is cut off, and the newly made rose is attached to the right place.
- If you want to attach a stem to a rose, you need to insert a wire into the base of the finished flower and fix it with glue.
You need to pay attention to the shape of the petals. As a rule, the edges of roses are not processed according to the folds, so they look unnatural and uninteresting. To make the rose more natural, you can properly process the edges: pinch or turn the ribbon in some places in the desired direction, the rose will become like a living thing.
Master class from Nataliya k
For work you will need: A pink and green satin ribbon, 1.5 cm wide (about 2 meters each), canvas (burlap or other fabric - I do not recommend starting with dense fabrics, because it is more difficult to pull a needle with a ribbon through a dense fabric) ,threads to match the ribbons (mulina), a special needle for embroidery with ribbons "chenille" - a thick needle with a large eye and a sharp tip.
It is good to embroider with this needle on fabrics with fine weaving: silk, organza), or a “tapestry” (“knitwear”) needle - with a large eye and a blunt tip, it is more convenient to embroider on canvas, burlap, knitwear.
For a rose, lay 5 carcass threads emanating radiantly from the center, taking into account the diameter of the rose (in this case beam 2 cm).
Bring the tape to the front side and start wrapping the gimp threads, passing the tape either above or below the gimp thread. Make sure that the tape lies face up.
Lay the tape loosely, without tightening.
Our rose is ready
Now let's make a few rosebuds with loops attached
Embroider the leaves around the buds with long stitches with curls (holding the tape with the front side up, bending the tape to the wrong side, in the opposite direction, make a puncture with a needle from above vertically in the middle of the tape, according to a certain stitch length. It turns out an acute angle with symmetrical curls of the edges in the middle of the tape
Ribbon embroidery allows you to create real voluminous masterpieces. Finished works surprise with their beauty and realism, and therefore this type of needlework is so loved by many craftswomen. Today, floral motifs are especially popular, and creating them is not at all difficult. In this article, we will walk you through the most popular ways to embroider a rose with ribbons for beginners step by step.
For work you will need the following:
- Base fabric for embroidery. For the duration of the training, we recommend choosing for this purpose
- Hoop
- : ordinary sewing, wide eye and thick
- Scissors
- Silk ribbons
Sequence of work
For those who have not previously encountered ribbon embroidery, you need to start with the basics.
How to attach a tape to a needle
First of all, we will analyze how to fix the tape on the needle:
- We put the tape in the eye of the needle.
- We make a puncture with a needle, retreating one and a half centimeters from the upper edge of the tape.
Step 3: You've got a small loop. Now carefully pull out the long edge of the tape.
The tape is securely attached to the needle and is easy to work with.
Fastening the free edge of the tape
- Wrap 0.5 cm of the free edge of the tape twice.
3. We stretch the tape to the end. We get the desired small bundle.
After the skill of fixing the ribbon on the needle is mastered, you can proceed directly to the embroidery of the rose.
How to embroider a simple rose with ribbons
Option 1
The easiest way to embroider a rose with ribbons, available for beginner embroiderers. This is a gossamer rose. It is very easy to do.
Here is your rose.
Option 2
- Take the tape and bend its cut. Twist it three or four times to form the core of the flower. (fig.1)
- Secure the core of your future rose with threads matching the color of the ribbon. (fig.2)
- Fold the edge of the tape at an angle to create a crease. This fold must be secured with ordinary stitches. (fig.3)
- Continue making folds and sewing them to the base. (fig.4)
- If you are using a wide ribbon, then fasten the pleats with a few stitches, moving up from the base of the flower. (fig.5)
- You have made the heart of the rose, which you will need to sew into the center of the outer petals. Don't make this core too big. Lay the seam along the edge of the tape and pull it to the base of the flower. Fasten. (fig.6)
- Now embroider the outer petals of the rose. (fig.7)
- With threads matching the color, sew the made rose into the middle. (fig.8) Before sewing on a rose, twist it in your hands and determine which side it looks best on. The flower looks more beautiful if the widest petal is located at the bottom.
- Now bring the needle with the ribbon under the core of the rose. Poke the needle back into the fabric again to form a loop. Do not tighten it too much, let it be wavy or twisted. This will create a beautiful petal. (fig.9)
- Fill all the empty space at the core of your rose with these petals. (Fig. 10)
Option 3
If the task is how to embroider a small rose with ribbons, we suggest choosing the following simple technique:
1 We fix the tape on the needle. We display the tape from the bottom up in the place of the center of the future bud.
2 We retreat 7 cm, place the free edge of the tape on the needle, which is directed to the place where the tape and fabric are attached.
3. We collect the tape into an accordion in increments of about 1 cm.
4 We drag the tape through the fabric from top to bottom as close as possible to the center of the bud. We get a small rose.
Such miniature flowers look beautiful when there are several of them at a short distance from each other.
Master class how to embroider a rose with ribbons
Option 4
This option, how to embroider a rose with ribbons, is a little more complicated, but quite accessible for beginners.
- Draw a sketch of the future flower with a pencil on the fabric.
2. We fix the tape on the needle, pull the needle up from the bottom up at the base of the flower. We twist the tape into a tourniquet and fasten it at the base of the bud, for this we pass the needle through the fabric from top to bottom.
3. We insert the thread into the second needle and sew our stem along the entire length to the fabric.
4. Similarly, we sew small branches that come from the main stem.
5. Take a white ribbon and gently fold it into a bud. At the base of the bud, we make a few ordinary stitches with a thread so that it does not fall apart. The resulting product is set aside for now.7. We embroider three petals from above from this point.
8. We sew the finished bud, made by us earlier, into the center of the flower.
9. We fix the white ribbon on the needle and embroider the rest of the petals. We drag the needle with the tape from the bottom up in the center of the bud and from this point we bring out the petals: we pass the needle into the fabric from top to bottom and slightly twist the loop formed. On the wrong side of the fabric, we draw the ribbon to the center of the bud, pull it out at our starting point and embroider the next petal not far from the previous ones.10. The number of petal loops varies depending on how lush we want to get a bud.
11. Now it remains to add leaflets to the product. To do this, we fix a green ribbon on the needle and bring it out from the bottom up to the base of the sheet. Next, we make a pass for the length of the sheet and sew its outer edge to the fabric.
12. From the wrong side, we draw the tape into the base of the next sheet and repeat the procedure. If you wish, you can use the same technique to make one leaf not green, but white color, and it will turn into a small rosebud.
13. When the embroidery process is finished, you can paint it. We start painting the bud with paint, starting from the center.Our ribbon rose is ready!
So, we looked at how to embroider a rose with ribbons for beginners in several ways.
We wish you good luck in your work!
Roses. A master class for beginners regarding this particular flower will be discussed in this article. Using embroidered with ribbons flowers easy to give new life old bag or a blouse that has been accidentally stained.
Roses are loved by many, which means they are versatile and perfect not only for decorating clothes or interior items, but they can also be used to create postcards or in gift wrapping. Learning how to create such beauty is not at all difficult. All that is required of you is a lot of desire and a little patience. And, of course, a few tapes.
Preparation of materials for work
In order to step by step the embroidery with rose ribbons can be easily studied, you should select the necessary materials and tools. In general, you can use absolutely any fabric for embroidery, but still pick up canvas or burlap for training.
A needle for embroidery with ribbons should have a large eye and a sharp tip. Of course, if you are embroidering on canvas, you can use a tool with a blunt tip. But this option is only suitable for canvas. The ribbon you choose can be any width. But still, a width of one and a half or two centimeters is considered the most suitable. In this case, embroidery satin ribbons roses are considered the most correct. Also, in some cases, you will need embroidery thread. To make the work look neat, select a thread that will match the ribbon as much as possible in terms of color characteristics. And do not forget about the hoop for stretching the fabric and scissors.
Embroidery ribbons. in a simplified version
If you still think that embroidering with ribbons is difficult, but you really want to make such a product, there is another option for you. It is simpler than embroidery. It is like a false embroidery with rose ribbons. A master class for beginners in this version will explain how to fold roses from satin ribbons.
You need to take a ribbon, determine its center and bend in this place at an angle of ninety degrees. Then alternately turn the edges on top of each other, and at the end pull one of them and fasten the flower with threads. To do this, simply sew it through. After you collect the required number of copies, these flowers can simply be placed on the product and sewn on. Then you can complement the overall picture with simple ribbon knots and embroidered stems.
How to get started
Before embroidering roses with ribbons, a master class for beginners suggests studying some important points. First of all, a neat knot should be created on the ribbon. It should be large enough to securely fasten the tape. It should not jump out at the most inopportune moment, so that all the embroidery with rose ribbons is not spoiled. Schemas are not often used in this work, but it is still worth doing some markup. The markup will allow you not to violate the correct proportions in your composition. You will see where you need a flower or other element, as well as represent its dimensions.
So, to make a fastening knot, you just need to fold the edge of the tape two times and flash it. Now your tape in work will definitely not slip anywhere. Most importantly, try to make it look neat from the wrong side of the product.
Ribbon embroidery roses. Scheme
Even the most experienced craftswomen when creating big works schemes are used. This allows you to better navigate the picture and not miss the size of the flower. If you have finished circuit, then it will be much easier to embroider.
You can prepare templates of the plot you like for repeated use. In this type of needlework, the same option can be so modified that no one will guess. You just need to change the color or size of the ribbon or complement the work with beads. To create a similar pattern, make a sketch on thick cardboard, and then use a thick needle to create holes in the places of the intended stitches. Using a pencil, transfer the dots to the fabric and start embroidering.
Progress
In this section, we will consider embroidery with rose ribbons step by step. To get started, take a ribbon and twist a small bud out of it. This will be the center of your future flower. So that it does not have any chance to fall apart, sew it and attach it to the canvas.
After the bud is fixed, take a piece of tape about two meters long and begin to form a flower. This length is enough for a fairly lush rose, and if you want a smaller flower, then you need a smaller amount of ribbon. When creating medium-sized stitches, lay them around the bud so that the shiny side of the tape remains constantly on top. This will give your picture brightness. Try also experimenting with wider ribbons, then you will get larger and more expressive roses.
naughty tapes
You are deeply mistaken if you expect the tape to immediately fall the way you want it to. Not at all. At first, it can twist in the wrong direction or bristle in the most unpredictable places. And in this case, only patience and training can become your assistants. Look at the critical moments of your flower and, armed with a thread to match the ribbon, just feel free to hem the petals where you see fit. With this action, you will surely be able to "lay" your rose in the way the plot requires.
Shutdown
You need to dream up a little more and work a little to get the finished embroidery with ribbons. A bouquet of roses should be supplemented with small buds. And also do not forget about the leaves and stems.
To make the stems, you need to either sew them with a thin green ribbon using or twist the ribbon and sew it to the surface of the fabric using threads. The leaves are made with a wide ribbon in one stitch or narrow, but in two stitches. To complete the plot, sew on beads, imitating dew on the petals, or add some other sew-on elements. A basket or vase in which you can place your bouquet will add originality and complexity to the composition.
Tape over at the beginning light shade sew the basket with horizontal stitches. Then twist the second (darker) tape into a bundle and sew in a vertical direction so that new stitches form a checkerboard pattern with the previous ones.
Now we need to create a pen. First, sew small stitches of the same color along the contour, and then take a longer piece of another tape and go through each stitch with it, while performing twisting movements. Can you make a ribbon basket? different shades. The main thing is not to tighten the ribbons in any case so that the basket does not turn out flat.
Rose embroidery on threads
Another interesting and uncomplicated method can be embroidered with rose ribbons. A thread tutorial for beginners is ideal for those who are new to embroidery. In this embodiment, it is not necessary to twist the inner bud separately. You should fasten the thread on the fabric in a certain place and make five stitches in different directions from this point.
In general, the picture should resemble a star, and all stitches should be the same in length. The degree of splendor of the rose will depend on the length of the thread stitch. Bring the tape out at the point where the stitches came out and start laying it in a circle. In this case, in turn, draw the tape over or under the thread. The flower should not be tightened. Instead of a thread, you can use a thin tape. The flower should be quite lush and voluminous.
Decoration and care
In order to get a finally completed embroidery with roses, paintings or other products with it, you need to finalize them. If this is a picture, then it should be taken to the workshop and a frame should be selected for it.
And if this is a piece of clothing or an interior item, then this product needs to be finished. If you are going to place the picture under glass, then you should use special frames that will allow you to save the volume of the picture.
Things with embroidery can get dirty quickly enough, they should be washed or even dry-cleaned. But such products should be washed by hand and in no case wring out or rub. IN otherwise the drawing can be significantly deformed.
Do not wash those products on which tinting of tapes was carried out.
