How to make leather bracelets with your own hands. How to make leather bracelets with your own hands (MK and video). DIY leather bracelet - master class begins

Leather jewelry has probably existed since the time when people first learned to sew clothes from this material. Even very simple belts, bracelets, earrings and pendants made of leather or leatherette look stylish. It’s not difficult to make leather bracelets with your own hands; there are a lot of options for such accessories, and besides, you can always come up with something of your own. This will be discussed in our article.

History and myths

Making leather jewelry is quite simple. You can wear it for a long time, it is very easy to care for, and in addition, it is durable. Do leather bracelets people learned with their own hands a long time ago. Such decorations were especially popular in northern countries; mythical significance was often attributed to them.

Important! Northerners wore and still wear wrist jewelry made from animal skin. But some Indian tribes, as well as residents of remote islands and isolated areas of Africa, until recently had bracelets even made of human skin in use - and this was considered a symbol of courage and victory over the enemy.

Men prefer leather bracelets more often than the fair sex. Until a certain time, this was generally considered purely men's jewelry. However, modern ladies are very active image life, play sports and quite often take on responsibilities that until recently were considered masculine.

So why shouldn't women wear such jewelry? Moreover, a leather bracelet can be not only brutal, but also quite elegant, richly decorated with rhinestones or beads. Of course, such accessories are not suitable for every outfit. But if you prefer sporty or ethnic style- why not?

What types of bracelets are there?

No one has yet proposed a generally accepted classification of this type of leather jewelry. However, they can be divided according to the manufacturing method:

• from a single piece of leather or leatherette;
• from pieces;
• wicker

In turn, accessories made from a single piece can also be different. For example, you can make a solid bracelet or an openwork one:

• The second option takes longer, and in addition, special care is required.
• Solid bracelets can be with overlays, with embossing, with metal inserts - in a word, there is room for your imagination to run wild.

Before you sit down to work, think:

• what exactly do you want to get;
• what materials do you have.

The most important thing is the skin. You probably already have a piece, since you came up with the idea to make a decoration.

Important! Scraps from old jackets, boot tops are suitable, even a frayed belt is still suitable for smaller accessories. See if you have a relatively large piece or only pieces left - the shape of the future product will depend on this.

DIY leather bracelet - master class begins

The task of any decoration is to make your appearance more effective. This means that the accessory must, first of all, look good. This largely depends on the material. The skin should be:

• clean;
• no abrasions;
• as evenly colored as possible.

Therefore, first you need to cleanse the skin. Since you need a small piece, the simplest recipe will do. You will need:

• water;
• soap;
• ammonia;
• cotton swab.

Dissolve about 10 g of soap in half a glass of water. Add 1 tbsp. l. ammonia. Wipe the piece with this mixture and let it dry.

Scuff marks and uneven paint are also fairly easy to deal with. To do this, you need to look at the nearest shoe store and see what leather dyes they have. They usually come in aerosol packaging, sometimes in plastic bottles with a brush attached. Renew the piece and you can start making leather bracelets with your own hands.

DIY leather bracelets for men

Perhaps this is the simplest option leather jewelry. It is made from a rectangular strip. You need to prepare:

• a piece of leather;
• hammer;
• set of buttons;
• set for inserting buttons;
• tape measure;
• ball pen;
• ruler (preferably iron);
• square;
• cardboard;
• pins;
• thick needle or awl.

Important! The number of buttons depends on the width of the decoration. You can make the clasp with one button or two or three. In addition, one or two buttons can be used to decorate men's bracelet leather.

Sample:

1. Measure your wrist circumference. Since the fastener will have buttons, you need to add another one and a half to two centimeters so that the edges can be overlapped.
2. Determine the width of the future product. There is no need to leave any allowances here. The optimal width of a men's bracelet is 4-5 cm, but it can be more.
3. Draw a rectangle on the cardboard according to the measurements.
4. Cut it out (it is better to do this using a metal ruler with a sharp knife).

Important! For the template, it is better to take thin but rigid cardboard. This is especially important if you are planning to make an openwork product.

We cut the bracelet

Now the template needs to be transferred to the skin:

1. Place the skin outside down.
2. Apply the template.
3. Circle it ballpoint pen.
4. Cut with a sharp knife.

Important! You can cut either using a template or using a ruler. In principle, you can do without a cardboard pattern if the piece of leather is smooth and its corners are straight (for example, a fragment of an old belt).

Buttons and what to do with them

It’s not difficult to figure out the buttons – you can immediately see which part should be on top and which on the bottom. In principle, you can go to a studio or sewing store, where they probably have a device that allows you to do this in a few minutes. But there is nothing difficult about putting these elements on a men’s leather bracelet with your own hands.

Important! In the set for inserting buttons you will find a black circle - it is placed under the product so as not to scratch the table. There is a piece of rod there - without it you cannot install the button. In general, it is not difficult to understand which part is needed for what.

We pierce holes

You already have the blank, now you need to figure out where to make the holes. To do this, put the bracelet on your wrist and make marks. Tailor's pins are best suited for this purpose:

1. Insert one pin from the edge of the workpiece that is on top.
2. Insert the second pin into the corner below.

• The most common office hole punch makes perfect holes in leather.
• If it is not there, you will have to do it with an awl or a gypsy needle.

In any case, the hole should be the same size as from the hole punch.

We put buttons

Now - the most important thing. Each button consists of six parts - two main parts and four attachments. You need to start inserting from the part that will be on top. The upper main part looks like a mushroom - it has a cap and a short stem:

1. Insert the leg into the hole so that the cap is on the outside.
2. Put on the attachments - the one with the thread should be on top.
3. Clamp it all together with pliers or a special press.
4. Insert the bottom of the button in the same way.

Important! The cap of the button should align with the recess in the nozzle.

Decorating the bracelet

Actually, a men's leather bracelet made with your own hands is ready. But if you wish, you can decorate it. For example, insert a couple more buttons into different places. You can do it differently - decorate the decoration with a simple overlay geometric pattern.

You will need:

• multi-colored pieces of leather;
• leather glue;
• scissors;
• ball pen;
• ruler.

Make several elements - for example, brown triangles and white squares. It is best to draw them with a ballpoint pen on the wrong side. Cut out the elements. Place them on the bracelet, and then glue them with leather glue or universal glue according to the instructions.

Wide bracelet

The technology for making a bracelet 10 cm wide or more is no different from that used for strip decoration. But you need to make a pattern. The pattern for the lower part of a narrow sleeve is most suitable.

Important! You can rip open an old shirt or blouse and make a template.

Features of making a wide leather bracelet:

• The pattern will be in the form of a trapezoid.
• The buttons should be placed at equal distances.
• Of course, you will need more of them - from 5 to 10.
• You can insert eyelets and make a lace-up decoration. True, it is difficult to do such work with a hole punch and pliers - you need a press.

Women's bracelet with chain

Making women's jewelry is a somewhat more complex process, but this activity provides simply unimaginable opportunities to show your imagination. For an elegant, yet very simple, women's bracelet you will need:

• thin strap;
• long chain;
• scissors or knife;
• press or hole punch.

To make a leather bracelet:

1. Cut 2 strips of the same length. The size does not matter; the width of the decoration itself will be adjusted by the chain.
2. Mark the holes at both ends of each strip using pins or a ballpoint pen.
3. Make holes with a hole punch or awl.
4. Pass the chain through both holes of each strip.
5. Place the bracelet on your hand so that both strips touch your wrist.
6. Adjust the length of the chain - if necessary, rearrange the lock and remove excess links.

Important! This DIY leather bracelet will look very impressive if you give each strip the shape of an arrow.

DIY braided leather bracelet

A simple but effective decoration. For such a bracelet you will need a strip of leather approximately one and a half times longer than the circumference of the wrist. Think in advance how your product will fit on your wrist:

• lace-up;
• on a buckle;
• on a button or button.

To weave a bracelet you will need:

• strip of leather 2-5 cm wide;
• sharp knife;
• metal ruler;
• ball pen.

Option 1

A three-strand bracelet is woven like a regular braid:

1. Mark the wrong side of the strip, dividing it widthwise into 3 equal parts. It is better to draw with a ballpoint pen on the wrong side.
2. Cut the strands, not reaching about 1 cm from the edge.
3. Place the strip right side up.
4. Take the left strand.
5. Pass it over the second and under the third.
6. Take the strand that is now on the left.
7. Pass it over the second strand and under the third
8. Weave this way until there are 2 cm left to the end.
9. Sew the strands together to create a continuous fabric.
10. Attach the clasp.

Important! If the bracelet will be held on by a button, make air loop made of leather or thick threads. In the same way, you can weave a belt or leather bracelet with your own hands from any number of strands.

Option 2

A decoration in which only the middle strands are intertwined, while the outer ones remain straight, will look very impressive - they can be made a little wider than the middle ones.

Master class on making a leather bracelet:

1. Divide the strip into 5 parts.
2. Cut in the same way as in the previous case, that is, leaving an uncut piece of approximately 1 cm.
3. Draw the second strand from the left over the third and under the fourth.
4. Don't touch the last strand.
5. Draw the strand that is now second from the left in the same way as the previous one.
6. Braid until there is 1cm left to the edge, then sew the strands together. The extreme ones can be shortened a little.

Option 3

It is not necessary to make a braid along the entire length of the bracelet. You can first braid a braid 2-3 cm long, then leave a gap, braid the braid again, etc.

Option 4

You can make a braided lace bracelet. Weave the decoration. Make holes along the edges - one or two at a time - and insert a thin leather cord.

How to make an original leather bracelet with your own hands?

Women's accessories differ from men's in their elegance and the ability to use the most different materials For decoration.

Bracelet with voluminous decorations

If desired, you can make a leather bracelet with voluminous flowers. For this you need:

• strip of leather;
• pieces of leather of the same or a different color;
• leather glue;
• scissors;
• sample;
• pan.

How to proceed:

1. Make a bracelet from a strip of leather and attach a clasp to it.
2. To decorate your product, cut out petals - circles or ovals of the same size - from pieces of leather. It is better to do this according to a template.
3. Place the petals inside out on a clean, cold frying pan. Start heating the pan slowly. The petals will bend. As soon as they accept the required form, carefully collect them.
4. Combine 3-4 petals into a flower, and then glue or sew on the bracelet.

Important! The middle can also be made from a piece of leather, a bead, seed beads, or even a colored feather.

Openwork bracelet

It is made almost the same way as a strip bracelet. Only the strip is something like leather lace.

Important! To make such jewelry you need a very precise template - strictly according to the size of the bracelet.

All sorts of holes are cut into the template - flowers, petals, Celtic weave, and basically anything you like. Then the template needs to be placed on a strip of leather, fastened so that the pattern does not move out, outline future holes and carefully cut out. The clasp can be made with buttons or lacing.

In this article you saw a master class on making the most different bracelets made of leather for men and women. Use these basic ideas, try them out in practice, and then show your imagination and improve your jewelry, and accordingly, your image.

We will need:

1. About 2 meters of leather cord (2 mm) (the length depends on how many times you want to wrap the bracelet around your wrist. 2 meters of lace will allow you to make about 4 turns of the bracelet),
2. 1.5 meters of leather cord (1 mm),
3. 6 meters of leather cord (1 mm),
4. About 140 small beads with a hole large enough to thread a narrower (1mm) leather cord through,
5. beautiful button(optional).

Of course, you can use leather laces of other diameters, the main thing is that they can be threaded into beads.

So let's get started! The bracelet on the right (photo above) does not have a button and will be fastened with a loop at one end and a knot at the other.

First, take a 2 meter long cord and fold it in half.

Now we take a lace 1.5 meters long and tie it in a knot around the loop as shown in picture 1.

Then we lean the short end of the lace (on the left in the picture) against the center, and tightly wrap the long end around the base of the bracelet in order to make a beautiful beginning.

It is very important to work carefully as the laces are very thin and can break. You can first practice strength on some other lace.

Now tie a knot as shown in picture 2.

Then we put all the beads on long end lace (the one with a diameter of 1 mm) and tie a knot at the end so that the beads do not move out during work.

As for the short tip (the same cord with a diameter of 1 mm), it can be cut off or inserted into the first bead if the hole size allows.

So, let's move our first bead up.

Now we take a 6-meter cord and cut it into 2 identical parts (DO NOT CUT). For example, they can be wound into balls, as shown in picture 1 on the left.

We tie a knot (from a 6-meter cord) directly under the first bead.

Well, now you need to carefully follow the steps shown in pictures 4 to 14

At first there is a chance of doing something wrong, but don’t worry, you need to carefully undo what you’ve done and start again with the second bead. Or maybe everything will work out right away.

It is very important to alternate weaving “above” and on the next bead “under” the thin cord in the middle (which has beads). It is necessary to maintain alternation in order to secure the beads well and beautifully between two thicker cords (2 mm wide).

Well, do you see the alternation?

You can easily get the hang of it because this process looks more complicated than it actually is!

Don’t forget to periodically wrap the bracelet around your wrist to see its length.

To finish, place 1 end of the braided lace in the center (for example, the left one), and wrap the other end around all the other laces. Then we make a knot as at the beginning of the bracelet, shown in picture 4.

Now we take all the ends and tie them into a large knot. Pull it tight. Depending on the length you need, you can skip a little space and tie another knot and another, as shown in the last picture.

If you are using a button on the other end of the bracelet, the distance between the two knots will be the button loop.

OK it's all over Now! Your hand-woven leather bracelet is ready!

http://bellezza4u.ru/accessuari/item/61-kojanii_braslet_svoimi_rykami.html

It's time again to stretch our hands a little, exercise our imagination, tap into the creative spark within us and make something with our own hands. And not even something, but trendy leather bracelets. What's great about these bracelets is that you can wear them with anything, especially ethnic clothing. In addition, there are a huge number of different forms, colors and options, so you can always choose a leather bracelet to match your outfit. Well, it’s not even worth describing how good they look on the hand.

So, let's get down to the actual process of creating bracelets.

DIY wide leather bracelets

You will need:
. Leather straps (strips of leather with a clasp at the end)
. Ribbons
. Metal spikes
. Threads
. Super glue

You can simply glue a narrower piece of tape onto the bracelet and add some spikes.
Or you can attach spikes and entangle them with a bright thread (yellow, for example). You will get 2 wonderful bracelets.

A couple more options creative process"How to make leather bracelets"

You will need:

- leather laces - you can use thin leather ribbons
- floss threads
- glue
- scissors
- scotch
- needle

Step 1
Measure your wrist by wrapping the leather cord loosely around your wrist twice, then add an extra 10cm to tie it. Glue one end of the leather cord to the surface so that it does not move and, stepping back about 5 cm from the edge, drop a drop of glue onto the leather cord and attach your first color of floss to it.
Step 2
Continue winding the floss around the leather cord until you have a strip of the width you want, then cut off the rest of the thread, securing the end to the bracelet.
Step 3
Take a different color of thread and do the same procedure with it again. Continue doing steps 2 and 3 until you have done about 5cm of different colors.
Step 4
When you're done wrapping, take the needle and pass it under yours. If you want, you can add a small drop of glue to make sure your floss doesn't come off.

Step 5
Tie the end of the lace that is closest to the wrap around the other end of the lace. Make a simple knot. The knot should be strong, but the leather lace should pass freely back and forth and slide through it.
Advice: Before tying a leather lace, wet it a little and remember it to make it softer and easier to tie. This will also help make a strong knot.
Step 6
Leaving at least 10cm on the other side, repeat steps 1, 2, 3, and 4 again.
Step 7
When you have finished wrapping the other side of your bracelet, re-tie the loose end on the other side.

You will get wonderful multi-colored bracelets.

Well, now more complex options:
You will need everything you have on hand: leather laces and strips, beads, chains, glue, threads.

1. Bracelet with beads. Take 2 laces, place beads between them and attach the beads to the laces by passing threads through them and entangling the laces with these threads. In the photo: the first from the wrist.

2. Multi-strand bracelet with beads. Just grab some suede threads, a couple of end clasps, and seed beads with holes for your threads to fit through. String your beads and beads onto strings, tying the thread after each with a knot. Secure the fasteners at the ends.

3. Braided bracelet with beads. It is too easy way. Just start braiding your hair with suede threads, adding beads here and there, secure the clasps at the ends, and you're done. This woven bracelet can also be made with a chain. Just add a thin chain instead of one of the threads and start braiding.

Don't stop your imagination. You can make your own options and variations. The main thing is that you don’t have to buy such wonderful bracelets in the store.

DIY leather bracelets (video)

Outdated jacket old bag or a piece of leather lying around in the bins is an ideal material for creating stylish jewelry.

In this master class you will learn how to make a leather bracelet with your own hands from tin can and a small piece soft skin. For decoration, you can take any stone that you have, buy a natural mineral, or use an imitation made of plastic or glass. Here's the role decorative element Amber plays.

Preparation of materials and tools

To transform a tin can, a damaged piece of amber and several small pieces of leather into a massive and stylish women's bracelet, you will need the following tools and materials:

• pieces of soft and thin genuine leather;
• amber;
• transparent universal glue “Dragon”;
• canned food tin;
• metal scissors;
• scissors;
• ball pen.

If you don't have a stone, you can make one from polymer clay, for example, by .

Step-by-step master class with photos

First, make a metal frame for your leather bracelet. Tin from a can of canned olives or olives is best suited; it is thinner and at the same time holds its shape well.

Using tin snips, cut out a rectangle and trim the corners, rounding them.

Give the frame an oval shape. Try it on your hand and, if necessary, reduce the length.

Make a backing from the wrong side. To do this, use a ballpoint pen to trace the outline of the frame on a piece of leather. For this stage, you can take material with defects, for example, with uneven coloring or rougher material.

Using scissors, cut out the backing, allowing an allowance of one centimeter around the entire perimeter. Spread the entire back side with transparent universal glue “Dragon” or “Moment”.

Glue the backing to the inside of the frame. Fold the seam allowance to the outside, and make folds from excess leather at the ends. Please note that the leather, lubricated with glue, stretches well. Therefore, at the edges of the blank for the leather bracelet, stretch it slightly.

Let the glue dry for a couple of minutes and use scissors to trim the folds as close to the plane of the bracelet as possible.

Decorate a women's bracelet with fine beautiful skin and stone. To do this, take a segment three times larger in area. Apply clear glue generously to the middle and to the stone.

Mark approximately the center point on the product and start gluing the skin from this place. Place amber in the same place. While the glue is still wet, use your fingers to form folds around the stone. Cover the chipped area with drapery.

Add glue to the remaining surface and glue the leather decor along the entire outer surface of the bracelet.

Shape the decorative drapery to your liking. Fold the edges inward. If possible, try to keep as few folds as possible on the inside of the product. Trim off the excess.

After a couple of minutes, cut off as many folds of leather as possible from the inside of the bracelet.

Cut out another piece for the back side. Measure the workpiece by placing it against the surface.

Apply glue to the entire surface of the part.

Carefully glue the part to the inside, thus hiding the edges that are folded on the outside. Start gluing from the ends of the product.

Once the glue has completely dried, give your leather bracelet its final shape by pressing it into a small oval with your hands for a few seconds.

A thin metal base will help maintain its shape and add elasticity to the structure. Using this technique, you can decorate women’s leather bracelets with your own hands and other elements, for example, shells, sea ​​stones and glass, metal parts and even interesting beads. In any case, your masterpiece will be unique.

We also have a tutorial on making a leather bracelet with your own hands, but it uses a cord weaving technique. If you still have some skin left, decorate for yourself or as a gift. It’s very exciting to create, it always works out in the end unusual souvenir or costume jewelry.

Other instructions for making jewelry in different techniques. Join us on in social networks, to receive news about publications, look at crafts and other participants, and sell yours.

.
We offer interesting master classes on creating unique bracelets from simple to more complex ones. It is not difficult to learn this craft.

Prepare a piece of leather belt that looks presentable (without scuffs or protruding threads). Before cutting off a segment, measure the width of your wrist, be sure to leave a small margin so that you can sew on a clasp.

Select several suitable beads to decorate your jewelry. It is better that the beads are flat, then the jewelry will be more comfortable to wear.

Carefully begin sewing decorative elements to the leather belt using a needle and thread of a suitable color.

Fill the entire space of the bracelet symmetrically with beads.

Buttons are used as clasps in factory leather bracelets. If there is no special riveter, then prepare regular sewing accessories. The wider the decoration, the more buttons it is better to use.

Using strong shoe thread, carefully sew the button elements to the ends of the bracelet.

This method will allow you to get an invisible fastener. But a button or clasp from old jewelry is also suitable as a fastener.

As you can see, you can make a leather bracelet with your own hands in a few minutes and at minimal cost.

A thick old leather belt can be easily and happily turned into a stylish bracelet. This is a pleasant activity that will captivate you and allow you to realize yourself in needlework. We don't need any special tools. This handmade idea does not require any financial costs. You can cut the leather with a stationery knife. We will sew on the beads with an ordinary strong needle. There will definitely be beads in stock. You can buy colored lace. It's quite inexpensive. We choose the color of the lace depending on own preferences. The bracelet bracelet is made like this:
Cut the blank from the belt. It should be of medium thickness so that you can braid it later. We cut this workpiece not completely into three thin strips of equal width.

We make a hole in the part where we will have a buttonhole.

Cut two pieces of colored thin lace. Their length should be longer than the leather blank, since we will be forming a buttonhole from the lace.
We thread both pieces of lace through the hole.

We tie a knot so that we get a loop into which our beautiful metal button will pass with medium effort. We secure this loop with thread.

We braid a braid from five parts (three leather and two parts from a lace).

We wrap a colored cord around the end of the bracelet. We tie it in a knot.

We sew the button so that the length of the bracelet suits us. To do this, mark the location where the button is attached when trying it on your own wrist.
Use a blade to cut off the excess ends of the braid. We tie two wooden beads to the ends of the lace.

We sew beads, all kinds of metal decorative elements, beads with invisible stitches.

We enjoy wearing a stylish bracelet that we made with our own hands. An old belt turned into a real designer piece of jewelry.

Other options for alterations and the use of old things can be found in.

Master class on making a bright leather bracelet

A stylish leather bracelet is an essential attribute fashionable look. The variety of these accessories today is enormous. And despite this, it is still quite difficult to choose what will suit us in a particular situation. Therefore, we suggest making stylish decoration on one's own. A bracelet will be made that will complement an airy dress with leopard print, or any other “leopard” item. The whole secret lies in the stone that we will use. This is a moss opal that resembles the color of a leopard. To highlight the stone, we will use bright red leather. We will place a metal base inside the bracelet.

Materials for making jewelry:

— genuine leather of bright red color;
— moss opal 2.5x1.7 cm;
— metal base 18x2 cm;
— cord (5 cm);
- instant glue;
- scissors;
- ruler.

Lay it out in front of you genuine leather. We place a metal base on top of it. Using a ruler, measure the dimensions of the future decoration. We mark the center where we will attach the stone, and the edges.

We attach moss opal to the center of the workpiece. Generously coat its flat side with glue and apply it to the skin. We wait until the glue dries completely.

Glue a metal base to the wrong side of the leather. In this case, we lubricate only the central part (under the stone) of the base with glue, leaving the edges unfixed for now.

We take a small piece of cord.

Lubricate it with glue and wrap it around the stone from the wrong side of the leather.
We stretch the skin over the cord so that we get a convex frame of the stone.

Lubricate the metal base with glue. Apply the skin on one side first. Let's do light wave on the surface of the skin. To do this, gently tighten the skin with your fingers in the center and smooth out the rest of the skin.

We do the same on the other side.

Trim off excess skin. We leave a little margin for the inside of the decoration, literally 1.1 cm.

Lubricate with glue reverse side metal base. Carefully glue one of the edges of the leather, tucking it inward.

Glue the second edge of the skin. We make sure that the edges lie as evenly as possible and that there is no gap left at the junction.

We also fold the skin at the junction of the two ends of the bracelet and hide it inside.

Remove traces of glue from the surface of the leather. Carefully bend the metal base.

The bright leather bracelet is ready!

AFGHAN BRAID
This type of weaving is widespread in the East. This is how waist belts, horse harnesses, bag handles, etc. are woven. Having learned how to weave such a bracelet, you will at the same time learn a simple and durable way to connect leather strips without using metal fittings.


1. Cut two strips of leather 5mm wide and 160mm long.
2. Using a blunt awl, mark the edges of the slots according to the dimensions given here or change them as desired.
RULE: a) the distance between the slots is equal to half the width of the strip;
b) the number of slots on the strips differs by one (for us it is six and seven).
3. Make the slits with a chisel with a blade width of 6 mm.
4. Sharpen the ends of the strips with a chisel or knife.
5. Take the strip with seven slots in your left hand with the end free from the slots facing you. Use a smoothing iron or a screwdriver to widen the nearest slot. Pass the short end of the six-slit strip down through this widened slit, pull lightly and straighten the weave.
6. Sand the short end of the strip with six slots and glue strips with seven slots to the bakhtarma.
7. Using an ironing pin, widen the nearest slot on the six-slit strip and pass the seven-slot strip through this slot from the bottom up.
8. The principle of weaving is clear. Pass the bottom strip through the top strip each time.
9. Upon completion of weaving, sand the short end of the strip with seven slots and glue strips with six slots to the bakhtarma.
10. The choice of bracelet length is yours. Trim the excess from the ends of the strips. Punch holes. Install the bartack.

SINGLE PUZZLE


This and the next bracelet represent the embodiment in leather logical problems about braids. We refer lovers of such problems to books on entertaining mathematics.
1. Trim exactly one edge of the cooked skin.
2. Mark the ends of the slots, and then cut them with a knife. The length of the slots is 160 mm, the width of the cords is 3-4 mm.
3. Now trim the second edge of the bracelet.
4. Weaving. Mentally mark the top and bottom of the weave and number the cords from left to right: 1,2,3.
First cycle: - 3rd between 1st and 2nd;
- the bottom of the weave between the 1st and 2nd (turning out the cords should not bother you);
- 2nd on 1st, 3rd on 2nd;
- the bottom of the weave between the 3rd and 2nd. After the end of the cycle, the normal arrangement of the cords is restored.
Second cycle: This cycle can be repeated 2-3 times until the weaving is completed.
- 1st to 3rd;
- the bottom of the weave between the 1st and 2nd;
- 2nd on 1st, 3rd on 2nd;
- the bottom of the weave between the 2nd and 3rd.
Stop when weaving becomes impossible due to the tight arrangement of the elements.
5. Using a blunt awl or ironing iron and tweezers, distribute the weave evenly over the bracelet. Trim the edges with a semicircular chisel, punch holes for the fastening, and install the fastening.

DOUBLE PUZZLE


A variant of the puzzle in which six strips of weaving are used instead of three. In this case, each pair of stripes is taken as one strip, and weaving is performed in the same way as in the case of a single puzzle. Options with nine stripes are possible, with three stripes being taken as one.

GIRL'S BRAID

1. Cut three cords 220-250 mm long and 3 mm wide.
2. Gather the side surfaces of the cords with glue into one strip. The length of such an assembled strip is 25 mm. The opposite end of the cords should be free. Insert the assembled end into a clothespin or clamp.

3. Mentally number the cords from left to right: 1,2,3.
Weaving pattern: 3rd on 2nd, 1st on 3rd, 2nd on 1st, 3rd on 2nd, etc.
Make sure the cords are evenly spaced in the braid.
4. When the length of the braided part reaches 140 mm, clamp the edge of the braided part with a large clothespin or clamp so that the unbraided ends of the cords remain free. Gather the unbraided ends into a single strip with glue.
5. Chop the edges of the bracelet with a chisel so that the length of the unbraided ends is 10 mm.
6. Make two pieces to decorate the ends of the bracelet. Details are shown in the picture.
7. Sand the unbraided ends of the bracelet from the mesh side.
8. Connect the ends of the bracelet with the details of the ends with “Moment” glue, gluing the decorated parts to the ends of the bracelet.
9. Make and install the bartack.

FOUR CORDS BRAID

1. Cut four cords 220-250 mm long and 4 mm wide.
2. Gather the side surfaces of the ends of the cords with glue into one strip. The length of such a strip is 25 mm. The opposite end of the cords should be free. Clamp the assembled end with a clothespin.
3. Mentally number the cords from left to right from 1st to 4th.
Weaving pattern: 5th on the 2nd, 1st on the 3rd, 4th under the 2nd and on the 1st.
Next, the weaving pattern is as follows: the leftmost “ON” and the rightmost “UNDER and ON”.
4. Repeat steps. 4-9" Maiden's braid" The details of the design of the ends of the bracelet are similar to those given above. Change the width of the gluing area according to the width of the cords.

CIRCULAR BRAID

To make it, you will need, in addition to thin leather, a rope around which cords are braided.
1. Cut four cords 250 mm long and prepare a rope of the same length with a diameter of 3 to 5 mm.
2. Glue the ends of the cords to the end of the rope in a circle. The length of the glued section is approximately 15-20 mm. Additionally, secure the place where the cords are glued together by tightly wrapping them with thread.
3. Divide the cords into two pairs - left and right. Mentally number the cords from left to right from 1st to 4th, take the left cords in your left hand, and the right cords in your right.
4. Weave according to the pattern: pass the 1st cord behind the rope and pass it between the 3rd and 4th, lay it on the 3rd, draw the 4th cord behind the rope and pass it between the rope and the 2nd, lay it on the 1st. Next we weave like this:
the leftmost cord goes under the rightmost cord, the rightmost cord goes under the leftmost cord.
5. When the length of the braided part reaches 130-140 mm, the end of the braid should be secured. To do this, wrap the end of the weave with thread. Glue the loose ends to the rope.
6. Trim the unbraided sections. Their length should be 10 mm.
7. Make two end trim pieces.
8. Lubricate the unbraided ends with Moment glue and leave to dry. Now lubricate the details of the ends with glue on the bakhtarma side.
9. Roll the tubes of design details around the unwoven ends of the bracelet so that the threads are completely covered. Flatten the ends of these tubes by lightly tapping them with a shoe hammer. It is possible that the gluing area on the tube itself will have to be additionally glued.
10. Punch holes for the bartack and install it.

HARLEQUIN


This is a variant of a circular braid, which is woven with two pairs of cords, one of them light, the other dark. Place a pair of dark cords on the left and a pair of light cords on the right and follow all the instructions for weaving the previous bracelet.

The article uses materials from the book by Ilya Mitsel “Skin. Braided and embossed bracelets."