Braided bracelet made of leather laces for a man. Master class. Do-it-yourself men's bracelet from a cord. How to weave an intricate rope bracelet

Very bright and original braided bracelets have recently become quite popular among both children and adults. A variety of weaving methods and colors allow you to create an elegant thing with the addition of decor in the form of beads, beads, and various pendants. And the pleasure received from the process of work will cheer you up for the whole day. In addition, handmade crafts carry positive energy.

If you have a desire to create this colorful accessory, read the article below. It offers several patterns for weaving jewelry for men, women and children.

Baubles from this material are made monophonic and colored. Materials can be purchased at stores selling haberdashery, accessories and fabrics. There are leather, velvet, satin, nylon and twisted waxed threads. The founder of this type of needlework is the technique of weaving macrame.

For those who have never created such bracelets, we advise you to start with the simplest models. They are no less attractive than complex weaving. Even a child can cope with them. The work uses simple knots. Such as flat square or "Turkish head". It will take a minimum of time to work when using the most ordinary basis, but the result will exceed expectations.

You can start learning from self-twisted floss threads, and then purchase more practical materials.

Knots we use for weaving

Now consider the existing weaving patterns that can be used in the creative process.

double flat

The most widespread type of weaving. It also has other names - square, wrapping and double half knot.

Important! You must first measure the circumference of the wrist for a loose or tight fit. Do not forget that the measurement is taken taking into account the width of the fastener.

1. On some ledge or hook, knot two threads one meter long. In this case, one end should be 80 cm, and the other - 20. The short ends will serve as the base, which is braided with side threads.
2. Weaving begins on the left side, when the thread is laid on top, and then it is braided on the right side. At the same time, it is passed under the short ends, and exits between the left short and the length.
3. We tighten the knot.
4. WITH right side the same is done in mirror image.
5. The knots are stacked tightly to each other, then the chain is smooth and strong.

It also has the name "bow knot". Looks more gentle and elegant. It is made of thick and rigid rounded cords, therefore ready product looks very neat. Usually used in separate fragments pattern. The number of threads is taken equal to multiples. The more there are, the wider the craft will turn out.

Weaving is more difficult than the previous one due to the instability of the pattern, therefore, when tightening the loops, it is advisable to ensure that they do not move. To begin with, it is worth learning on some tight rope.

1. One of the ends is folded into a loop and placed on the other.
2. Now lay the second on the first, and then go under it.
3. Lower the second end into the right loop, threading under it, and placing again under this loop. We get the left loop.
4. Pull out both to align the pattern.
5. We continue knitting knots to the end of the chain.

Tatting

An example of it is shuttle lace.

1. Air loops braid the main threads along the entire length. Depending on the direction in which the fastening occurs, it can be left and right.
2. Fasten the thread on the clasp with two ends - short and long.
3. Pulling the short thread with your hand, make a knot with the other, twisting it from the bottom up and passing it forward.
4. The next knot is made behind the main thread, clasping it from the bottom up and coming out from under the working one.

Attention! In this method, the auxiliary thread should be 8–10 times shorter than the working thread.

Turkish

One of the types of the sea knot, which found its use in decorative needlework. The peculiarity of this weaving is that it is performed with the Josephine knot.

1. We make the first loop, fasten it to something.
2. Under it we knit the Josephine knot and we get three loops.
3. With the end of the thread, we add one more and we braid all four loops in the second circle with it.

Attention! You can weave a female or male bracelet in a circle from plastic laces without a fastener, using any cylindrical part equal to the volume of the wrist.

Celtic

Quite famous for its use in Christian manuscripts and monuments. For example, it was used in the ornaments of the manuscripts of the Holy Gospel and the Book of Kells.

You can make only one openwork element and tie the ends of the cord on your hand. Weaving in the form of figures various forms- round, square, triangular. It is made both from one color, and multi-color in several additions.

1. We create a loop from one end, pass the second through it. It turns out a figure like a heart.
2. With the same elongated edge, we go in turn inside all the rounded parts.
3. We make the same turns with reverse side until the entire space is filled.

How to weave a bracelet?

We have described the main weaving techniques used in making jewelry. They are used in various accessories that have both a classic strict look and a solemn elegant one.

We will need paracord - a lightweight nylon cord in two neon colors. AND the brighter it is, the more interesting the thing looks. For example, it will be green and purple.

1. Fold the green in half.
2. We have a loop on top. This is a fragment of the future fastener. You can make it in the form of ties or attach a metal one.
3. We wrap it with a purple cord so that both ends are on the left.
4. We wrap the upper half of the lower one, bringing the end of the rope to the right. It turns out that the knot grabbed the green cord, while located on the left side.
5. And then the steps are exactly repeated so that purple knots were alternately on one side, then on the other.
6. At the end, we make a thick knot, which is inserted into the loop made at the beginning of work.

with beads

For this you will need:

• carabiner for fastening;
• satin cord three meter lengths;
• round beads;
• 2 limit switches;
• 2 connecting rings;
• Super glue;
• pliers and round nose pliers.

We do this:

1. Apply glue to the inside of one of the limit switches.
2. We insert all three threads into it at the same time and clamp it with pliers. On the other hand, we thread the beads into the left cord, fixing them with a knot at the end.
3. From the side of the fastener we weave an ordinary pigtail 5–6 cm long.
4. From the left extreme segment we insert the bead, bending around it with the right cord. We continue until they run out.
5. Next, we braid the braid again. Trim the edge and glue it to the second trailer.
6. We open the connecting rings and thread them into the loop of the carabiner.
7. We string them on the limit switches and close them. You can wear the bracelet in several layers, using beads and cords of different colors.

For a man

This kind is done voluminous and multi-layered. Let's prepare two types of laces: of blue color and black, the size of four wrist volumes. We make a loop on the green, bending in half. Usually bracelets are made of natural, faux leather, waxed cord of one color or two-color. We need to work:

• two cords;
• large metal bead for fastening;
• scissors.

Work process:

Bracelet - pigtail

You will need three beautiful laces from any material about 2.5 wrist widths:

1. We fold the ends together and clamp with a clerical clip or tie a knot.
2. We fix them for some kind of hook or ledge. And weave a regular braid.
3. If you want a more voluminous bracelet, do not weave very tight. Leave tassels at the ends.

Of three laces

Such a bracelet can be made in the form of a pigtail or created with more intricate pattern. Decorate it with 9 large beads and two smaller ones. The cord is taken more than the volume of the wrist by 4 times. The accessory is made with a double flat knot.

1. The cord is divided into three parts. One of them is the size of the product with an allowance for a loose fit and fastener, the other two are the same.
2. We make two flat knots around a short segment.
3. Then we put a bead on it, crimp it with two extreme cords and again tie two knots.
4. We finish the work with two small beads located on both sides.

Of the many laces

This type of weaving can be carried out in any way with the addition of two other colors to the cord cut of one color and stacked in several layers. Which looks quite interesting and exclusive.

snake

It is usually woven from paracord or leather. Having measured the girth of the wrist, multiply this length by the number 12. This consumption will be for the entire product.

1. Fold the cord in half. We take it in our hands so that the loop looks in your direction.
2. We slightly part the ends to the sides, throw the right one on the left, bring it out under it and carry out the same actions with the left.
3. Insert the right tip into the left loop and thread it, while tightening it. We have a loop at the end for a fastener.
4. Then we throw the right lace on top of the left.
5. We lay the left end under the right one and insert it into the right loop.
6. Alternating these movements, we finish our bracelet.

Multicolored for a child

Bracelets for children can be woven from bright-colored material using any of the above methods. If desired, complement it with cheerful fittings made in the form of animal figures or hanging metal elements. Also beads and small multi-colored buttons will look good. By doing this craft with your child, you will accelerate his development. fine motor skills aesthetic taste.

To emphasize your individuality, choose a material of any texture and palette. And the schemes proposed above will help create unique masterpieces that will highlight the originality and artistic style of the owner of this jewelry.

What is the weaving of bracelets from laces will help to find out this article. Over the years, girls have adorned themselves with various accessories. They try to make such jewelry emphasize individuality, look as fashionable and modern as possible. Is it difficult to weave? Not at all. It is enough to know what exactly you want, choose the style and style of the product. Then a little imagination and Have a good mood will help to create a real masterpiece.

The Beginning of Magic

Bracelets are bright accessories with which girls, women and even men like to decorate the wrists. What are they made from? First, from gold, silver, decorate with precious stones.

Of course, you can’t make an accessory yourself, you need to buy it. Secondly, products from natural stones no less popular. Bracelets are a little cheaper. They say that each person has his own stone, it protects a person from various troubles. Thirdly, the ideal version of a fashionable product is baubles. Recently, the creation of such products has become very fashionable. Most often they are made from flagella, beads, threads and cords. This is suitable for different styles and types of clothing. Such jewelry will become a "highlight", as different accessories are used for them. You can weave yourself or purchase in a specialized store.

We will conduct a master class that will help you learn the stages of work.

The bracelet with beads looks very original. Such a product will suit even a man, but you will need to experiment with the color of the product.

For work you need to take:

• three satin cords of 1 m;
• many beads;
• carbine;
• limit switches;
• rings;
• pliers and round nose pliers.

1. We use glue for the ends. Apply inside, glue all the cords. You need to tighten it with pliers. From the other end, string in the same amount. Don't forget to tie everything in a knot.

2. Weave 6-7 cm pigtails. Pull it to the left edge, weaving it into our braid. Add a bead on the left and braid.

1. We finish the job by adding a lock. It is necessary to open the connecting ring, put on the carabiner, closing the ring. Connect the next connector to the ring, attaching it to the clasp.

How to do this is shown in the photo:

Such beautiful bracelet ik it turns out:

A bit of fantasy

How to weave a multi-colored bracelet? Let's make a beautiful silver bracelet. This classic version colors, which is suitable for different styles, to different clothes.

We need shoelaces in different colors.

Take the laces of medium thickness. Silver will be a little thinner. Calculate the place for the fastener so that there are no problems at the end of the work. Lay out the laces. Place the black in the middle and the silver on the left and right. Weave a pigtail, braiding around black.

At the end of the work you need to make a fastener. Take black fabric, cut out a square. We use a button. With the help of an awl, we make two holes in the square, threading 2 silver threads. Tie them in a knot on a cord, cut off. We fasten the button with black threads.

On the other side of the bracelet we make a loop that fits the button in size.

Remove the excess at the end so that the product is perfect. Now this accessory will definitely find a place among the beautiful products!

Fantastic works

Bracelets from leather laces look completely new. They are somewhat more expensive. But they have many advantages, for example, durability. And also they are easy to care for, you can wash, clean, without damaging the material. Leather makes the accessory solid and beautiful. The braid has a good texture, the laces come in different colors. I am glad that you can easily combine several techniques. Bracelets can be made not only from laces, but also jewelry, rings, pendants can be added to give a new look.

Progress:

Take embroidery thread leather cord, waxed rope knife or better scissors. Let's start.

1. We cut off 25 cm from the rope, make a loop at the end, and then a knot.
2. Cut off the excess, leaving 0.5 cm from the edge.

1. Place the tip of the skin near the knot. To do this, look at the diagrams below.

1. Wrap the waxed rope around until 0.5 of the tip is hidden.
2. Let's make a turn. Pull the tip into the loop, tighten to a strong knot.
3. Attach the embroidery thread to the rope and lace.

1. Wrap the string around the circle. Fasten the thread. Alternate weaving threads, stripes and threads for embroidery. Check your bracelet size.

1. Make a knot to finish the job.

These lessons are great for beginners. In general, working with bracelets is not difficult. It is enough to use high-quality material, drawings and pictures. Beginners will love the books and step by step lessons, where special attention is paid to tools.

It all depends on the desire of the master. Such products can be made by the whole family, because both adults and children like to wear bracelets.

Video on the topic of the article

You can watch video collections in which professionals show the basics of working with eyelets and laces:

Weaving bracelets on your own from laces is called differently - weaving baubles. This name is associated with childhood, many DIY crafts that were popular at the time. Schemes and methods of weaving bracelets, materials and accessories for such products depended directly on the imagination and skill of needlewomen for a long time.

It is difficult to meet a girl who has never heard of baubles and does not know how to make them. Even knowing how to weave simple patterns, you can make quite a decent decoration, both from laces and from beads. You can supplement with anything, if you have beads, leather laces, large beads, threads, and other accessories at hand, you can use them in practice.

For beginner needlewomen, there are many simple patterns and master classes on the topic of weaving bracelets, from which you will learn the secrets of making them from laces and how to make them. In particular, this master class will contribute to the development of such skills.

Transferring your thoughts to childhood, you can remember that a bauble has always been a bracelet for friends. Its main function was to bring joy to a person, to show how important a friend is to you. Children exchanged baubles different ages. Because these bracelets were easy to make and cheap.

This bracelet is quite versatile. We can say that if you do not supplement it with special accessories, then it is impossible to distinguish what gender it is intended for. Therefore, if you even want to please a man with such an ornament, do it with ease.

Today, among adults, weaving bracelets is an exclusive decoration that is made from laces. If you make it with your own hands, then it carries your idea, in any case it will be original and unique.

Having studied the weaving patterns from the main knots in this weaving technique, you are able to create masterpieces. Not applying special efforts, without spending and painstaking work, a person can perform a miracle that pleases the eye and warms with the warmth of his aura.

In today's master class, you will see how to weave a lace bracelet with your own hands at home. If you have a desire and a little time, then this instruction will help you make crafts and enjoy the process, plunging into the atmosphere of childhood and kindness.

Learning to weave bracelets from laces for beginners

• Lighter
• Lace
• Clasp
• Scissors.

You will make such a bracelet quickly and easily. You can give it to children, or keep it for yourself. As you can see from the list of required raw materials, there is nothing complicated in making this type of craft. Even the accessories themselves speak of how simple and easy it will be to perform.

1. Make a loop out of string.
2. Cut off the end of the lace with scissors, which you will work on.
3. Burn it with a lighter so that it does not get disheveled during the craft.
4. The loop you've created doesn't have to end completely. Leave the end sticking out to make a hole through which, in the future, you will thread long end lace.
5. You make loops, thread a cord through them until you get the desired length of the bracelet.
6. Cut off the end of the lace. Cauterize.
7. Attach clasps to both ends of the bracelet.

Your product is ready to use. Now, you have seen how easy it is to make a small miracle in the form of a bracelet. Wear it for joy!

Like all products that are made by hand, bracelets have a category of main and additional knots. If you know how to build the main nodes, you can do a lot of crafts by combining them with each other. For example, the classical scheme is oblique weaving. Knowing the basis of its implementation, you are able to make many decorations without even inventing anything extra.

If you are interested in the technique of weaving bracelets from threads, wire and other materials, then this master class will help you learn the basics of this craft. Except detailed instructions and colorful pictures, you can watch a video where the manufacture of bracelets is clearly and intelligibly described.

The very name "baubles" is translated from in English like an object or thing. Baubles are the result self made craftsmen who weave threads or beads in a certain way in the desired pattern. Baubles are defined as a symbol of friendship. Such interesting decoration has its own special story. It is known that hand-woven bracelets came to us from the Indians. Those, in turn, used them as decoration.

Whatever the origin of this jewelry, but in any case, its main purpose is to adorn a person’s wrist and complement his image.

Video on the topic of the article

Weaving a bracelet out of lace will be easy. What is good about this type of needlework is that it does not cost much, and it does not take much time. In addition, the source material can be very diverse. The color range is also huge in its diversity.

How to start weaving bracelets from laces

First of all, you need to decide on the color of the product and the material from which you plan to weave the bracelet.

Weaving "knots":

Simple weaving, with which light and thin bracelets are created:

In addition to simple weaving, beads are woven into lace bracelets, the product looks even more chic. Yes, and there are no difficulties in execution. Here are some ideas:

2. You need a regular cord and beads. Weave an ordinary pigtail and weave beads into it. Everything is simple.

3. And here is another example of weaving a bracelet made of laces and beads, the already well-known "Shambhala".

a) Cut off 50 cm of the cord (the most best option- waxed cord, because it is strong enough). We put on the cord the number of beads you need as they will be located in the finished bracelet.

b) Now you need to stretch the base with beads to its full length and fasten it so that it is more convenient to continue working.

c) The base is fixed, and now you can start knitting knots. To do this, you need a waxed cord 1 m long. We tie a regular knot, but so that the interlacing of the ropes is under the base from the wrong side.

d) Now you need to make another knot, right, but close to the main one (already done). As it shown on the picture.

e) We make one more of the same knot, but already the left one.

f) Now move the first bead and under it you need to make a combination of knots right left.

g) We move the next bead, but the combination of nodes under it is reversed, i.e. left-right. We continue to do the same with all the other beads, changing the combination of knots after each.

h) When the last bead remains, then under it weave a combination right-left-right.

i) Fastening cords. It is necessary to turn the bracelet over to the wrong side and pull the cord that has become left into the loop on the right side (Fig. 2). Before tightening the cord, you need to drop a drop of glue in the place where the threads fit, after tightening, cut the cord as close to the knot as possible. Here we drip more glue, and press the right cord already. Then we cut.

So, the bracelet itself is ready. It remains to make a castle for him. Untie a knot at one end of the bracelet cord. Now you need to thread both ends of the base towards each other through any bead that will be in the center of the castle.

Now weave as many knots as you need for the castle. Nodules need to be alternated (right with left). The bead that was in the middle of the castle should be woven. (But you can not add anything to the castle at all). Fasten the ends of the lock threads, as in the bracelet. That's all! The bracelet is ready.

There is also a video that shows in detail how to weave Shambhala.

Weaving bracelets from laces for men

Not only do we need jewelry, men are also not averse to wearing them. It goes without saying that men's bracelets should be made in a more restrained range, and the material for manufacturing should be special. In this case, leather laces are perfect. A bracelet made of such material will not only add uniqueness to the image, but also emphasize masculinity.

Weaving bracelets from leather laces is almost the same as options where any other materials are used. This can be verified by examples.

The first video is in English, but the translation is absolutely not needed, everything is very simple:

Another video in English, but easy to understand:

There are many options for weaving leather cord bracelets. These bracelets are suitable not only for men, but also for women. So turn on your imagination and forward to new masterpieces!

There are many various decorations that can excite a girl's fantasy and develop a love for beauty. However, not a single, even the most expensive, jewelry can be compared with handmade bracelets. The main advantage of such products is that it is realistic to make them from any materials at hand. Today we will talk about how weaving a bracelet from laces.

Beginning of weaving: preparing the essentials

Before starting work, make sure you have the right tools and materials. So, for example, to create beautiful baubles you will need the following components:

• folder-tablet with an iron clip at the top;
• two laces (two different or identical colors).

When all the necessary things are ready, take two shoelaces (in our case it is dark blue and light blue) and fix their ends with a clip on the tablet (you will get four working threads).

Tie the first knot

The principle of creating beautiful bracelets from laces has common features with macrame, therefore, it is based on the principle of tying knots. So, separate the laces so that the center and sides are blue and blue.

Next, take the first working thread (blue), wind it under the second and third at the same time, forming a number that looks like a four. Now take the fourth blue lace, bring it under the formed tail of the “blue four”, pass over the second and third and run under the first.

Tie a knot. Further weaving of a bracelet from laces will occur according to a similar principle. It remains only to observe the order of the sides (perform the above action alternately: either to the left or to the right).

We make a simple bracelet from an ordinary lace

To make a simple bracelet, take one cord, for example, red. Then step back about 5 cm from its beginning, tie the first loop (it does not tighten into a knot). Then skip another 2-3 cm and do another one. Pass the first loop through the second and, holding the edge of the lace, tighten securely.

Next, make another loop, thread it through the previous one and tighten it again. So we continue until you get a chain of peculiar air loops that can fit on your wrist with ease. After that, thread the free tail from the lace into the remaining loop, tighten and tie in a knot. This is how braided bracelets are made from laces with your own hands.

Simple bracelet with ties instead of a clasp

As an option, you can make a chain bracelet from air loops with convenient ties instead of a fastener. The principle of weaving such a bracelet is similar to the previous description of the work. However, unlike him, initially it is worth making a larger indent (about 7-9 cm) and only then wrap the cord in the first loop.

Exactly the same indentation must be performed on the opposite side. This is done as follows: when you create the last loop, pull the remaining tail into it and tighten (you will get a closed loop), fold in half, take measurements and carefully cut off the excess. Tie both ends of the lace into a bow or knot. The product is ready. We can use this weaving of a lace bracelet to create multi-colored baubles for the whole family.

How to make a bracelet with weaving "Shark Tooth"

To do this, take two shoelaces of different colors, for example, blue and white, fold them in half and attach them to the metal clip of the planchette. Ideally, it should turn out like this: the first and second stripes are blue, and the third and fourth are white.

Next, pick up the first part of the lace and put it on top of the second. After that, swipe it under the third. Place the fourth strip on top of the third, and pass the resulting tail under the first. Now slightly loosen the loops obtained on both sides so that a circle is obtained from the first and last thread. After these simple steps, you can already do the weaving of lace bracelets with your own hands. Schemes for creating such products can be found in our article.

At the next stage, we thread the tail from the fourth lace into the loop of the first and tighten the knot. We take the fourth thread. We start it under the third and second. Then we put the first one in our hand.

We pass it under the second, and bring the tip into the fourth, creating a loop. We tighten the knot. We repeat all the above steps alternately in one direction and the other. At the end of weaving, you will have a beautiful bracelet that can be tied around your hand or fastened with a nice plastic snap-in clip.

By the way, instead of laces, threads, clothesline, satin ribbons, paracord. This is a wonderful decoration and a gift, so feel free to use this kind of cord weaving when doing creative work. Schemes of such products can be found below.

How to weave "Cobra"

Another unusual type of weaving that can be made from ordinary shoelaces. To do this, again take the laces of two colors, for example, raspberry and light green. Then fold in half, pinch the ends with a clip. Take the fourth strip. Put it on top of the third and second, and then bring it to the first. Pull the tail through the first lace and pass it through the loop formed between the fourth and third strip. Tie a knot.

Take the first strip. Put it on top of the second and third, and thread the fourth lace into the resulting loop between the first and second thread. Tie in a knot. Repeat these actions on both sides alternately until the bracelet converges on your wrist. This is how beautiful weaving from a cord turns out. Schemes and variations of it can be found in our publication.

To make a bright and beautiful bracelet, you should choose the right colors for laces and other materials. For example, the black color scheme goes well with any other color. The same goes for white. Always use matches or a lighter that will allow you to painlessly cut the lace to suitable sizes. With their help, you can get rid of excess threads and prevent further weaving from unraveling.

Lace baubles: straight weave patterns

If you want to make a bracelet using straight weave, take several laces of different colors as a basis at once.

Next, we fasten the ends of the laces and begin to make a series of knots to the right and left (we do this in one color). After we weave another lace and repeat the nodal pattern the same number of times. As a result, you will get a beautiful product from different colors.

In a word, stock up on a lot of laces, be patient and don't be afraid to experiment using a variety of weaving of a lace bracelet.