How to make a garland of stars with your own hands. How to make garlands of stars. From paper tartlets

On New Year's Day, a paper garland is used to decorate the holiday tree and as an independent decor. It is easy to make it from scrap materials with your own hands. There are several options for creating such decoration.

Garland of paper lanterns

New Year's lantern garland can be used as a night light

The finished decoration can be placed on top of electric lanterns. Only before this is it carefully inspected, checking the wires for integrity.

To create lanterns you will need the following materials:

• scissors;
• colored paper;
• a simple pencil;
• ruler;
• needle;
• glue;
• thread.

Making a garland takes place in several stages:

1. Cut a strip 7–8 cm wide from a sheet of colored paper.
2. Mark a piece of paper using a pencil along a ruler. You should get vertical strips of equal size.
3. Repeat the procedure, but use a needle instead of a pencil. Then it is easier to bend the parts in places where the lines outlined in pencil are pressed with a needle.
4. In the middle of the workpiece - perpendicular to the lines on it - mark a zigzag with a pencil and push it with a needle.
5. Assemble the resulting workpiece into an accordion. It is important to pay attention to the oblique areas in the middle of the workpiece.
6. Using glue or thread and a needle, assemble the accordion into a lantern.
7. String several lanterns on a thread.

The diagram shows the sequence of actions when making a flashlight

A garland of paper lanterns is perfect not only for the New Year, but also for usual time for interior decoration, shop windows, etc.

Decor made of three-dimensional stars for the New Year

If you make stars from white material, then you can color them with paints or felt-tip pens

To create decoration use ordinary white paper, color or packaging. You can take paper intended for scrapbooking.

Materials for making stars:

• paper;
• scissors;
• eraser;
• protractor;
• compass or saucer;
• ruler;
• simple pencil.

The work is performed in a certain order:

1. Turn the paper over reverse side. Using a compass, draw a circle on it - the diameter of the star. Instead of a compass, you can use a saucer - attach it to the paper and trace it with a pencil. Draw a straight line from the edge to the center.
2. Using a protractor, measure an angle of 72°. Draw a straight line. Repeat the procedure along the entire diameter. The result should be 5 lines with the same distance between them.
3. In the middle between the straight lines, draw additional ones - you can use a dotted line. Connect the resulting lines into a star shape. Erase the circle and other extra lines with an eraser. WITH right side Mark a connecting strip from each edge of the star.

   To make a garland, it is good to use elements of different colors and sizes.

4. Cut the resulting workpiece and bend along the guide lines. If the paper is thick, the folds are creased with scissors or a ruler to give them maximum expressiveness. Then the workpiece should be bent.
5. Using the same principle, make the second half of the star. Coat the connecting strips with glue and glue the two parts together.

   The result is a three-dimensional star

Paper ball decoration

The garland can be hung in any position - both horizontal and vertical

To make a garland you will need:

• colored paper;
• compass;
• scissors;
• glue;
• needle with thread.

Work order:

If you glue a rectangle to each figure from below, you will get baskets with balloons. Then, in the interval between them, you can string clouds cut out of paper onto a garland.

Volumetric paper snowflakes

It is advisable to choose cardboard with a density of 65 g/m2. cm. The larger the square, the higher the paper density should be.

To make jewelry, you need materials and tools:

• cardboard - 6 squares;
• scissors;
• stapler;
• glue;
• threads;
• pencil.

Paper garlands - a simple and inexpensive option holiday decor. Children are always interested in making New Year's decorations, experiencing pleasure from the process itself and rejoicing at its result.

Hello, dear blog readers! Let's continue New Year's theme about crafts. And today we have an amazing review. By the way, there is already one review, follow the link and get inspired. Nowadays it has become very fashionable to create stylish things with your own hands. And it really makes me happy.

If you want to decorate a room beautifully and create a New Year's atmosphere, of course, create it yourself. We create our own moods. Previously, people waited for the New Year; the smell of tangerines is still associated with the holiday. Our parents did all this for us, so we were looking forward to this evening. Now we must create an atmosphere of magic and kindness for our children.

That is why we make delightful paper crafts that will later decorate our home, children's room, and group in the kindergarten. And will give you a festive mood. And we will make, of course, from different materials. The brighter and more unusual, the better the result.

And evenings like these, when you make crafts with your children, can become family traditions. And children will associate the holiday with mom and dad with their family. Isn't this a miracle? In our daily routine, sometimes we don’t have time to be with our family. You come home from work, and it’s already evening and you have to put the kids to bed. Time flies very quickly.

My favorite phrase: let’s not put everything off and let’s get creative.

DIY paper garland for the New Year

Let's try to start making the simplest and most interesting crafts. All we need to create is hands and children. As you know, children have the most developed imagination. The most versatile paper craft that will decorate your home, room or group. Go.

For work we need the following materials:

• paper;
• pencils or paints;
• scissors

Take a sheet of paper, fold it in half, and then cut it.

Next, we fold one piece like an accordion and draw a snowman on it. If you don’t have artistic talents, then you shouldn’t despair. We take a template from the Internet, print it out, cut it out and trace it. As a child, I always did this. If I needed to draw something, I outlined the drawing. She leaned the desired drawing against the glass, and placed a blank sheet of paper on it. And this is how the translation turned out. Did you do that? Oh, let's get back to our creativity. Everything was drawn. Nose, buttons, branch. We will cut all this out.

Cut out the snowman and color it brightly. Or you can just leave it white.

Glue with glue or tape. And we get a lot of gorgeous snowmen. We can add a Christmas tree to them and New Year's toys. Let's use our imagination and create beauty. What else can I say? We gave you an example of work, then everything depends on you.

For example, make something like this bright craft very easy. In order to get everything right the first time, we will take a white sheet of paper. Let's fold it and from the bend we will draw a Christmas tree, a snowman, a house, a ball, in general, everything related to the holiday. Then carefully cut everything out.

and now look how the work looks in the end.

Colorful, this work already gives New Year's mood. This beauty can be used to decorate a group in a kindergarten or a children’s room. Children will admire such beauty. Craft and create a holiday.

The most, the most at the most simple craft. See photo below.

Yeah, it's just a masterpiece. Everyone does it and every year! Make the stripes and your child will do the rest for you. And you feel good and the child is busy. We bring to your attention this beauty option.

The next craft option is very wintery. And make it quickly. We draw clouds and snowflakes, then we draw a snowman and color him. And of course, we carefully cut it all out. We glue everything onto a thread, but we are making a three-dimensional snowman, so a needle will help us. We thread the needle and first carefully pierce the snowman’s head, and then make a voluminous body. We secure our composition with a snowflake and a knot.

Since our theme is New Year’s, the work will all be winter. But for others holidays We will prepare a review of the garlands for you separately. The main thing is just not to forget.

If you think a little, you can come up with such beauty. Big gifts everywhere. You will have to tinker with this work and it will take a little more time than you would like.

Take cardboard and cut it into small strips. We create the frame of our gift from them. Then we wrap it in colored paper or specially for gifts. We pierce our boxes with a needle and get this cute little thing.

If you have small, inquisitive children, be sure to keep an eye on them. Since they will 100% open gifts and see what's inside. The next work also caught my eye. It was executed, so to speak, unusually.

New Year's paper garland templates for cutting

Here's Santa Claus with gifts. The entire manufacturing process is the same. We take the paper, fold it several times, apply Santa Claus, trace all the details, and then carefully cut everything out.

Angels to you for Christmas

Next template with different items. How to make a garland out of them. Everything is actually very simple, take paper of a delicate color and fold it, then trace the template and cut it out. To make the decorations colorful, cut them out of colored paper or paint them with paints.

All of the listed works and templates are created from paper. We can offer you other more complex work options. Naturally, it’s easy to create from paper, and this is a huge plus in such creativity. We invite the children to help you. But if there is thermal glue in the work, then you need to refuse help. Let's move on to other work.

DIY garlands for the New Year to decorate a room made of paper

It doesn’t take much time to decorate a room beautifully. You just need to make the decor with your own hands. Well, since we are talking about paper crafts, we will create jewelry from this material. Judging by the diagrams and template, creating such beauty is very simple.

The brighter the material, the more colorful your room will be. You can take it specially for crafts New Year's paper. Usually, needlewomen use scrap paper; it is true that it is more expensive, but you can choose it with drawings, and it is much denser.

How do you like this decoration option? Christmas trees and stars. The manufacturing process is simple. We draw or trace the template, then cut it out and fix it to the thread.

Here are some paper ideas for you. They look amazing and create a festive mood. To work you will need:

• Glue;
• beads;
• singing;
• satin ribbons
• everything you have at your fingertips.

We cut out objects from paper and then decorate them with different things. IN in this case, we have listed the materials for work above.

Look how juicy and bright the following decoration looks.

And this is the entrance to scrap paper.

I think the creative process is no longer worth telling, since all works are created according to the same principle. The only difference is the technique and material. If you want your child to work with you, then of course choose simpler crafts. Cutting and gluing, as well as decorating winter heroes, are just up to the task.

The origami technique is right there. It’s a difficult job, of course, but it’s voluminous and will perfectly decorate a child’s room. This craft will take a lot of time, so start making it early.

There are a lot of small details, and the work itself using this technique is painstaking. I don't have enough patience for such a craft. I envy people who can make such a masterpiece with pure envy.

Since we started talking about origami techniques, I want to show you this cute Santa Claus. We make it according to the instructions. We need to create several of them, since the end result is a garland.

So that Santa Claus does not get bored hanging by a thread, we will create a granddaughter for him.

We add Christmas trees, snowflakes for Santa Claus, the Snow Maiden, and a New Year's ball. And then you’ll definitely get an interesting New Year’s garland. Imagine with your kids. I will never get tired of saying that any work you create is unique. If someone wants to repeat it, it won’t be the same.

We continue the paper theme and show you ideas for inspiration. The next option is unusual and we will need scrap paper to create it. We draw the mittens, and then carefully cut them out. We fasten everything with a thread or satin ribbon. This decoration can also be used to decorate windows.

There are many wonderful crafts and they are all good in their own way and worthy of attention.

Children's garland for the New Year

There is a lot that a child can do with his own hands. True, sometimes he needs a little help from you, and then he will move mountains for you to praise him. The simplest children's projects to create a festive atmosphere. And of course these are rings.

Then, in terms of ease of implementation, comes the next craft.

Flags are always in fashion in any weather. There is only one thing, but! To make them more New Year's, draw stars or Happy New Year greetings on them.

It will be interesting for children to create such beauty. Before making it, we cut out the strips, and then carefully glue everything into a ball shape. If the child is over 5 years old, then adults first explain what needs to be done. This way the child concentrates on the result faster. Yes, yes it's true.

In fact, if you want, you can create any New Year’s beauty that will delight your eyes. For a child, draw circles, triangles, flags, stars, Christmas trees. And there are many, many things that can be drawn. Next, he cuts everything out and, together with you, glues it to the summer one. That's all. Creative activity will always be useful to a child, and not only because it develops hand motor skills and thinking. And in the future, the child will also know for himself what he really wants to do. Not because you said so, but because he himself wanted it that way.

Today we looked at a large review of New Year's paper garlands. The process itself was not described in many examples. Why we wrote a little higher and we won’t repeat it. You come up with any craft yourself, for example, we didn’t say that snowflakes will also turn out to be very beautiful, let’s even say snow work.

Since our review is only from paper, we tried to find as many wonderful products for you as possible. We did not mix other crafts made from non-paper materials. For example, a felt work is an idea for inspiration. But that's a completely different story!

We are very grateful to you for coming to our blog again and again. We hope that on our website you will find inspiration for new works. After all, sometimes you look at a craftsman’s craft and new ideas appear in your head that you want to bring to life. We remind you that the site also has New Year’s articles for you.

Thank you very much for your attention!

Very little remains until New Year's holidays. And although the Metal White Rat will come into its own only on January 25, we must prepare for the meeting now. Think over the menu that should include. Think about how to decorate a house, apartment,...

The totem likes everything original, so hand-made or garlands are perfect. The rat loves shine and soft colors. She will especially like gold and silver, white, shades of the pastel spectrum, orange, purple. You shouldn’t use everything in one decoration at once; it’s better to give preference to one.

I offer you several interesting options, which everyone will surely like and will decorate your home. Many jobs can be done with children or even offered to do something during labor lessons at school.

How to make New Year's garlands with the symbol of the year with your own hands - Rat (Mouse) templates

Themed decorations are the simplest and most original way appease the symbol of the year. Cute, almost cartoonish, images will surely delight children. Therefore, such garlands will decorate a children's room, groups in kindergarten.

To work we will need:

• thick paper;
• scissors;
• hole puncher;
• braid.

Operating procedure:

Download animal templates. The images are mirrored. This is done so that the garland looks the same from any side. Carefully cut out the shape and glue it together. Use a hole punch to make holes in the animals' ears and thread the ribbon through them.

The finished decoration can be mounted under the ceiling. You can also make simple flags with images.

Catch the flag template and single images of animals. Right-click, download, and then simply enlarge to the size you need. You can also draw the blank by hand.

Another option is to fix it in a spiral on the Christmas tree. You can place the same or different images on one garland.

And try to create another decoration in Japanese technology origami. Such work can be entrusted to children 9-10 years old. They will surely love how a simple piece of paper turns into a very cute mouse.

To work we will need:

• paper (regular or special for origami) 15x15 cm;
• rope;
• wide ribbon.

Operating procedure:

Fold the sheet diagonally twice. Make sure that the corners meet clearly, the fold lines are clear and even. Position the workpiece so that the square becomes a diamond. Bring the bottom vertex on the left and right to the center line. Repeat the same steps from the top.

Expand. Fold along the folds, creating a triangle fold in the center. These are future ears. You should get an elongated rhombus. Immediately determine where the mouse’s muzzle will be (in this master class it’s on the bottom) and where the tail will be. Take each triangle-ear by the top point and lead it to the base. Iron all folds carefully.

The diagram looks like this.

Lead the lower part of the workpiece with its apex to the triangle, which is formed by the bends next to the “ears”. The vertices should touch. Iron the fold, bend it back. Turn the workpiece over. Fold the halves towards the middle on both sides. Turn inside out. The result is a muzzle.

Grasp the top point of the remaining part of the workpiece. Lower it down, folding it in half. Mark the fold. Carefully unfold and fold the middle inward. Then bend the tip so that it fits slightly inside the first fold. Hide any excess by simply folding it under. This will create the tail and back.

Return to the ears. Fold the top so that it lines up with the back. Take pencils, felt-tip pens and draw a mustache and eyes for the mouse. Attach the finished symbols of the year to a rope with some distance from each other. I use it for this decorative clothespins or bright paper clips.

I suggest tying bows from a wide ribbon between the mice. Its color should match the tone of the central design elements.

Garland of flags made of paper and paper clips for the New Year 2020

It is not difficult to imagine that such multi-colored chains can become the basis of beautiful garlands. You can hang them in this form on a small Christmas tree, they will look bright. But you can also make children’s favorite flags. And come up with your own version of decoration.

What you need to prepare to create a craft:

• a box of multi-colored paper clips;
• colored paper (you can use leftovers from previous creative works, since you will still need to cut the paper into thin strips);
• glue;
• a snowflake-shaped hole punch for decoration (or stickers, printouts of snowflake designs, pens to draw them on, etc.);
• scissors.

How to do

To create the frame, take colored paper clips, coated with enamel or painted in another way. For the flags themselves you will need colored paper. Cut thin strips from it. The width should not exceed the length of the paperclip. Draw a bird on one side so that you can later cut out the corner of the flag.

Thread one side of the strip through a paperclip and pull through. Fold the strip in half crosswise. Glue the ends together. Cut out the bottom part with a birdie shape to create a flag.

Prepare many strips of the same size for decoration.

Insert a different color of paper into the hole of each brightly colored paperclip and turn it into flags in the same way. Use glue and scissors.

Using a shaped hole punch, make a snowfall using not only white, but also colored paper. This way you can mix 3 colors in each link.

Glue snowflakes on both sides of each flag (or use another decoration method, such as adding snowmen, penguins, bullfinches, or other winter objects).

All that remains is to fasten the paper clips using the standard method to form a long chain of flags. The result is a wonderful New Year's garland that will become an unusual holiday decoration.

Homemade garland from candy wrappers

You can collect a huge number of candy wrappers of different colors, patterns, textures, you shouldn’t throw away this wealth, because you can make New Year’s crafts from it. It is enough to come up with some fragments that can be endlessly alternated and assembled onto a thread, and you will get an interesting decoration.

To work you will need:

• mix candy wrappers and foil;
• thread and needle;
• stapler if necessary;
• scissors if necessary.

Prepare different wrappers. It is advisable to use different shades, and the sizes can either be the same, or cut them with scissors. All completed parts will be attached to a strong thread.

Step by step work

Roll the silver foil into balls of approximately the same size. They, like beads, will be strung on a thread.

To make fan-shaped pieces to create alternating links, fold each candy wrapper like an accordion. Then bend the resulting strips in the center. Use your fingers to press down on this area to secure the bend.

Take a long thread and thread the needle, tie a knot at the end of the thread. Thread the first foil ball through, then thread the folded part of the fan through.

Thus, alternate the details. Thread the balls and then the wide pieces. You can use a stapler to fasten the side parts, and the garland becomes one whole.

Assemble a snake from a large number of segments. If you use the original wrappers of different colors, then the whole structure will turn out to be colorful.

I suggested a great way to utilize the wealth that children collect after each candy they eat. And after the holiday, you will have even more such raw materials, so you can come up with other options for decorating the Christmas tree.

Craft Stars in the form of a garland for the New Year for kindergarten

You can create this beauty with your own hands using glitter foamiran (preferably with an adhesive base). Be sure to involve children in such creativity, because it is for them, by and large, that the room and the Christmas tree are decorated before the fabulous night. Glitter foamiran with an adhesive base is an inexpensive material for children's creativity, which is sold in sets. You can buy yourself such sparkling wealth, then make many stars of different sizes to fill the garland of the desired length. Let's look at a master class on how to make it.

What was used:

• glitter foamiran (thick, sticky on the back side);
• 2 star templates printed on a printer;
• scissors;
• strong thread (knitting yarn, but can be replaced with nylon or other thread, thin tape).

How to do

Choose 2 sheets of different colors or use the entire mix included in the set for a colorful effect. Print on paper and cut out the stars, you can use parts of two sizes or more. For convenience, stick the templates onto cardboard. Trace the outline of the stars on the back side of the selected sheets of shiny material.

Cut out all the stars along the outline. Make 2 servings if you only choose 2 sheets to work with.

For one star on the garland you will need 2 blanks, since they will be glued together with their back parts. Take a strong thread. Remove the protective paper. Place the thread on the sticky layer in the center.

Cover the top with a second similar star, trying to clearly align the corners to create a symmetrical figure.

Assemble a long garland at random, alternating parts by color and size. This adhesive-based material adheres well.

A beautiful interior or Christmas tree decoration is ready. It sparkles and sparkles, looks very beautiful, and is easy to do if you work collectively.

An easy master class on making a garland from colored paper

The name speaks for itself. The work will take very little time, but the result will please you. Such decorations are suitable for home, kindergarten or even school. The idea can be implemented in school labor lessons.

Source: https://www.youtube.com/channel/UC5ULDV816GiEvfgvrC4hNsg

To work we will need:

• double-sided colored paper;
• scissors;
• ruler;
• pencil.

Operating procedure:

Fold the paper in half lengthwise. Then again from the blind side. Iron the folds carefully. Place the workpiece with the fold down. Draw a strip 1 cm wide on top. Place marks on the fold line in increments of 1.5 cm. Draw lines. Slice the “noodles” to a horizontal line.

Turn it over. Make cuts between the cuts, also not reaching the edge 1 cm. Carefully unfold the sheet and stretch it. There should be a “network”.

Make a few more blanks in other colors. Glue them together, bringing them to the desired length. The garland can be hung on the window, secured to the tulle with pins.

DIY garland of paper snowflakes for New Year's Eve

I really like the paper analogues of winter precipitation. But I also love garlands. In this master class I propose to combine them. You will get one original decoration.

Source: https://www.youtube.com/channel/UCWqcfwUxk9a7qGqt7892FFA

To work we will need:

• white paper;
• scissors;
• pencil.

Operating procedure:

Divide a sheet of paper in half lengthwise. Then cross each half by two more stitches. Fold the resulting rectangle along its width. Each wing is brought to a fold. Fold in half again.

Starting from the fold line, draw the outline of the future snowflake. Carefully cut and then unfold.

Repeat steps 1-3 with the remaining paper. Fasten all parts of the garland together with tape. Add elements until you reach the length you need.

Snowflakes don't have to be white, they can be colored.

How to make a garland of pine cones and bows to decorate a room

Look how beautiful it is! Natural material can be painted with golden paint and bows, beads or Christmas balls. A version of such a craft is presented in this master class, and you can easily reproduce a similar copy with your children to decorate a room or even an entire classroom. The more cones you collect in the park or forest in the fall, the longer the garland you will get.

What you need to prepare for work:

• twine or thin brocade ribbon for the base;
• cones;
• golden acrylic paint with a brush or other paint to cover the surface of the pine cones;
• beautiful satin ribbon with lurex;
• glue;
• half beads;
• Christmas balls.

How to do

Take everything to work necessary materials. You can keep the bows and balloons in the same color scheme; you don’t have to use balloons if you have enough pine cones to fill the decoration. Surface natural material cover with golden acrylic paint. If you use a brush, this coating will be uneven. Full coloring can be achieved using spray paint.

Prepare the base of the garland, such as twine or thin brocade ribbon. Attach the cones at some distance from each other using a glue gun.

For additional decoration, prepare bows from satin ribbon, and decorate the middles of the bows with beautiful half-beads.

Glue each resulting bow to the top of the pine cone to hide the places where it is attached to the twine. This way, you will already have a beautiful garland modeled, but you can also decorate it additionally.

Stick small balls between natural materials. There you have it, something wonderful is ready. Christmas decoration, which can be hung on the Christmas tree or on the wall. It is unusual, looks elegant, festive and lifts your spirits.

Step-by-step production of the New Year's garland “Snowmen” for windows

On New Year's Eve, glass surfaces are often painted in my family. But how difficult it is to wash them later. And I found an alternative. Making such a decoration is not as difficult as it might seem.

Source: https://www.youtube.com/channel/UCfUNn0nNcM35FBKL11tB1Iw

To work we will need:

• A4 paper;
• stationery knife;
• pencil;
• scissors.

Operating procedure:

Divide the paper into long side. Take one half. Fold it in half. Then fold each wing again, towards the fold line. Draw a snowman. Carefully cut along the outline. Open it up.

Repeat step 1-3. Then we color our characters, draw the nose, eyes, buttons and hat. We connect all the parts with tape. Or you can do all this using the applique technique - it will be even more beautiful.

Making a garland from plasticine for a wall or Christmas tree with the children

Candy decoration is popular at all times. Who among us has not made long chains of sweets and hung them on the Christmas tree or on the walls? How nice it is to gradually remove the candies from the branches and enjoy such delicious and favorite treats. This lesson also shows how to make a simple candy garland, but these will not be real sweets, but lollipops made from ball plasticine. Such a craft can be considered as a practical joke, because friends will probably want to eat delicious candies, but it turns out that they are not real at all.

What you need to prepare to make a New Year's craft:

• ball plasticine;
• stapler;
• file or thick plastic bag;
• golden ribbon or serpentine;
• thread (optional).

How to make a decoration

Prepare plasticine for work. Candies reminiscent of candies will be made from it. You can tie “treats” to the thread or simply staple them together. First, prepare these small pieces.

Turn each into a small slice triangular shape. Connect them together, alternating colors. These slices should be approximately the same size.

To make each lollipop round, fasten together about 4 pieces of two colors around the circumference. You will get two-color caramels. Then continue working the next day, when the plasticine has dried well.

Cut the prepared file or thick plastic bag into squares. Wrap a piece of candy in each one. Also prepare a golden ribbon to tie the ends.

Twist the candy wrappers, the candies will be clearly visible through the transparent plastic, they will be in no way inferior to the real thing. Tie bows at the ends with gold ribbon.

Using a stapler, assemble a garland or tie each candy onto a thread. The result was a beautiful New Year's decoration - bright and believable.

Ideas for making garlands with your own hands from all sorts of things

Shortly before the New Year, all housewives begin to sort through all the boxes, boxes, bags in search of what is high time to throw away. But I ask you not to rush. I offer several master classes in which I will tell you how you can easily turn unnecessary objects into a real masterpiece. I'll start with the original, very fragrant garland. Such eco-friendly jewelry is in trend today. And the Metal Rat likes them too.

And your home for the New Year 2018 can be made with paper garlands - stylish, cheap and beautiful. New Year's garlands, made with your own hands from paper (diagrams are attached below) the Yellow Dog will really like.

In Europe, this style of decoration has long occupied its niche in the field of New Year's design. Our country also has its own traditions in using this type of decoration for the New Year.

Where to begin

Modern offers of options and patterns for paper garlands are almost impossible to describe, the choice is so rich and varied. Having decided to take up this exciting craft and decorate your home with paper garlands, we perform a certain sequence of actions:

• Let’s get acquainted with a general short list of paper garlands that are easy to make even for a beginner;
• Having chosen the option you like, we proceed to a theoretical acquaintance with this technique;
• if required by the selected option paper garland, remove the required template;
• We prepare everything necessary for the work, according to the description.

List of types of paper garlands

In fact, the list of New Year's garlands, easily made with your own hands from paper using patterns, is not so short.

Take your favorite version of the New Year's garland as a basis, approach its implementation creatively and the result of simple work will pleasantly surprise you. So, let’s get acquainted with the most popular and simplest options:

• paper fringe;

• paper brushes;

• stars, flat and three-dimensional;
• Christmas trees of various stylistic designs;
• multi-colored mugs;

• multi-colored triangles;
• little animals (bunnies, foxes, deer, bears, squirrels, etc.);
• snowflakes, both at the base of the garland and on its pendants;
• paper lanterns, an endless number of options, right up to colored paper lanterns mounted on an electric garland;

• strips of multi-colored paper, a very stylish pendant that can be hung vertically or horizontally;
• paper link chain;
• figurines of New Year's symbols, including dogs;

• paper weaving origami, an easy option for beginners;
• hearts, imitation of bright New Year's cookies, which in Europe are hung on the Christmas tree;
• the chain is a snake.

Garland of circles

Very simple technology making such New Year's garlands with your own hands from paper (diagrams are used if necessary). However, what is important is the quality of the material used and the care taken in execution. When these requirements are met, the result is a very delicate and effective decoration.

Garland of circles

Required:

• colored thick double-sided paper in several colors;
• device for cutting circles (can be cut by hand);
• sewing machine;
• thin rope, braid, glue or adhesive gun (if the stitching method is sewing machine is cancelled).

Manufacturing:

Looking at the photo, you immediately understand how to make such a New Year’s garland from paper with your own hands without diagrams, everything is very easy and simple.

1. We cut the circles, sew them on the machine and that’s it, the garland is ready. When making several garlands, namely in this case, it is achieved maximum effect, the circles should be placed at different distances from each other.
2. Using the same technology, you can make beautiful garlands of hearts, stylized volumetric flowers, stars and snowflakes. Special attention You should pay attention to the selection of flowers, how many of them will be in the garland and which ones, it’s up to you to decide, the main thing is that the color scheme has a light festive palette.

Garland of stars

Garland of stars

All you need:

• green paper for stylized leaves;
• red paper for stars;
• shiny packaging ribbons;
• glue gun

Performance:

1. Using prepared templates, we cut a sufficient number of stylized leaves for our New Year's garland with our own hands from paper according to diagrams or templates. We calculate the number of leaves based on the fact that in the assembled elements of the garland they will be in one copy.
2. Next, we also cut stars of two to three sizes according to the prepared templates. To give volume to all the details, draw diagonal rays with a sharp object, trying not to damage the paper. A manicure file may be suitable for this purpose.
3. After we received volumetric sprockets, insert them into another and glue them together. Glue shiny dots cut from ribbons in the top center. We glue the entire structure to a stylized piece of paper.
4. We assemble the elements of the garland, as shown in the photo, having previously made holes for the ribbon.

Stars can also be made in a flat version, from both thin and thick paper, as well as from thin cardboard. This garland of large stars, hung together with an electric garland, looks amazing.

Garland of long strips of multi-colored paper

Such simplest option Even a teenager can make New Year's garlands with his own hands from paper (using diagrams or templates). The main thing is to choose the right material, and then you just need free time.

Photo: Garland of long strips of multi-colored paper

We prepare:

• multi-colored thick paper in rolls;
• several sheets of glitter paper for wrapping gifts;
• glue;
• rope of the required length for the garland.

Execution:

1. Cut the paper into enough a large number of strips of varying lengths from one meter to two, for example, you decide this issue yourself, depending on where the garland will hang. The width of the stripes is approximately 3 - 4 cm.
2. We carry out the work on the floor, roll all the strips into a circle and glue the ends, then leave them on the floor. We also prepare other elements of the garland, which are garlands of stitched small shiny circles, the size of a nickel.
3. We also connect the garlands of shiny nickels into a circle so that they do not get mixed up; we lay them out separately, with great care.
4. Now we make small piles of garlands, laying them out in a certain way, mixing large and small strips in each pile and placing several mixed circles of shiny garlands between them.
5. Then we string each pile onto a rope, achieving the spectacular look of a New Year's paper garland.

Garland of volumetric circles

This garland is also very simple to make, but notice how impressive it looks!

Garland of volumetric circles

Prepare:

• thick colored paper in rolls, having previously decided whether the garland will be mono-colored or multi-colored;
• thin non-stretch rope;
• colored paper contrasting with the main color of the garland elements for appliqués;
• glue.

Execution:

1. We cut wide sheets of paper, their length is determined by the desired size of the circle. We also determine the thickness of the circle, this will be the width of the prepared strips.
2. We make a test circle, for which we cut a sheet of paper and fold it in half lengthwise. We draw a line along the entire length, indicating the boundaries of the solid base of the circle. Then, we line the entire sheet into strips 3-4 cm wide, for example, stopping on the drawn longitudinal line.
3. After all the strips are carefully lined, cut them without going beyond the longitudinal line. Unfold and straighten the fringed sheet for the New Year's garland, made with your own hands from paper. Now, we glue each pair of strips one by one, lifting them up.
4. We glue appliques prepared in advance from contrasting colored paper onto the resulting circle, distributing them evenly. Paper circles We attach it to the rope for the garland using pendants made from pieces of the same rope that we prepared for the garland.

There are a sufficient number of options for such a very effective garland; its elements vary in the degree of complexity of execution, which ranges from very simple to simple.

Necessary:

• multi-colored dense and bright paper, holds its shape well;
• stapler

Execution:

1. For a very simple garland, cut identical strips of different colors from prepared paper.
2. Next, take two strips each and connect them from below using a stapler. Then, we bend the strips inward from the top, insert the next pair of strips and connect 4 strips with a stapler.
3. So we continue to make elements of the New Year's garland with our own hands from paper without diagrams and connect them together, achieving the desired length.
4. To make a more complex garland of openwork hearts, cut strips of different lengths; in total, it is enough to use two to three sizes.
5. Initially, we connect 4 strips, placing short ones at the edges. We bend the strips one by one, insert the base of the next element into them, and secure them with a stapler, as we described above.

The appearance of this New Year's garland attracts with its tenderness and is reminiscent of summer, in New Year's Eve such associations will bring special joy.

What is necessary:

• templates of flowers and leaves (as you can see in the photo, they are very simple and easy to draw yourself);
• double-sided colored paper of regular thickness and different colors;
• glue;
• fishing line

Execution:

1. We cut a large number of garland elements, according to the templates, from multi-colored paper. As you can see in the photo, there is no need to glue the yellow flowers and leaves; you just need to give them volume by bending the petals and making creases in the right places. We described how to make creases in the description of making stars.
2. We glue only the bells from white and pink paper, then we string all the elements onto a fishing line using a needle with a wide eye. To prevent the elements from slipping, after we thread the needle into the next element, we make a knot. The result was a very bright and stylish DIY New Year's garland made from paper without diagrams, but using simple templates.

Any New Year's greeting will look great on such a garland, and such beauty is done very, very simply.

Necessary:

• thick colored paper, three colors;
• white thin cardboard;
• rope;
• glue;
• thin bright paper for making letters if you decide to write an inscription on the garland.

Execution:

1. We cut out several kurugs from white cardboard, of different diameters, if this is consistent with your idea.
2. Using scissors and a sharp knife, we decorate the openwork edge of the circle, as seen in the photo.
3. Next, cut out strips of one or two widths from multi-colored paper. We fold the strips like an accordion and round off the sharp corners of the resulting multi-layer strip.
4. We open each strip like a fan, connecting the edges with glue. Laying out the fan bigger size onto an openwork circle made of white cardboard, glue it. We glue another fan of smaller diameter onto it, and a flat circle of contrasting color completes the composition.
5. On the mugs, if desired, we glue prepared letters, elements of a New Year’s garland made with our own hands from paper without diagrams, and string them onto a prepared rope, as shown in the photo.

Good afternoon. Today I want to tell you how to decorate your house for the New Year using a garland. We will do DIY New Year's garland. And I'll show you 33 ways its creation. We will crochet a garland, cut it out of paper, sculpt it out of cotton wool, and make modules for the garland out of salt dough. You'll love this collection of ideas. Moreover, there are many options within my means children's hands, which means the whole family can take part in creating New Year's decor for your home.

So, let's start creating beautiful home decorations with our own hands. Forward to New Year!

Children's garlands for the New Year

FROM PAPER.

At the very beginning, I will show you what garlands children can make for the New Year with their own hands - in classes in kindergarten, or at home with their mother.

A garland with houses is suitable for the little ones. We cut out silhouettes of houses (pentagon) from colored cardboard. From white plain paper we cut out the bottom snowdrift and the coal shape of the snow on the roof. We also cut into 2 bowls – doors separately and windows separately. The child’s task is to glue snowdrifts (down and onto the roof) and doors with windows onto the cardboard silhouettes of houses. Then the teacher himself or the mother strings the houses on threads, interspersing them with white circles of paper. To prevent the houses from sliding along the thread, you need to use a thick woolen thread and secure it with tape on back wall house. This garland will look good on the window.

Children will also enjoy making their own New Year's garland of three stars(on the right photo below). Here it is important to teach the child to apply the stars in such a way that the rays lie spread apart - they do not coincide with the lower silhouette of the star.

Garland for children

from sandmen.

We cut out silhouettes of people from rough brown cardboard and the child colors them from it (easy to work with) cotton swabs when drawing dots of buttons, cheeks and eyes. White wavy stripes are already more difficult to make, but the child can be helped.

Children can also make blanks for a garland with paper holly leaves. Berries are possible roll from red felt(in hot soapy water, roll pieces of felt into balls, like plasticine, and let dry overnight). This method is called felting.

Can make red berries from cotton wool(mix pva glue with red gouache (more glue, meunier gouache) - soak pieces of cotton wool in this red liquid, roll balls from it, dry overnight.

Or you can roll berries for a garland - from crepe paper (just roll out lumps from crumpled corrugated paper).

Red and white garland. If children (even the smallest ones) are given large white cardboard templates of Christmas tree decorations, a brush and one paint (red only). Then you will get a good result. Before this work, you need to teach the child to carry out different types lines:

• (straight(vertical and horizontal)
• criss-cross,
• rounded "like smiles"
• large round dots(you place the brush vertically and twist it with your fingers like a spindle - you get a completely even circle).

This white and red garland can be made not on the basis of cardboard, but based on SALT DOUGH(as it is in the photo above).

A glass of salt + a glass of flour + 1 tablespoon vegetable oil (so it doesn’t stick to your hands) + water(add gradually, stop adding when the dough becomes like tight plasticine.

Roll out on the table (we roll out without flour, thanks to a spoon of butter, it will not stick to the table). Cut out the shapes of Christmas tree decorations. If desired, you can apply SCREEN STAMPS to the surface of the rolled dough (even before cutting out the silhouettes). Any embossed lace, or a knitted napkin, or a piece of wallpaper with a raised convex pattern can act as a stamp. We place this “stamp” on the dough and roll it with a rolling pin - pressing so that the relief is imprinted on the surface of the dough. We dry the figures in the oven - paint them in white gouache and dry them. And then we give the child paints to apply lines, stripes and polka dots.

GARLAND New Year's

FROM CONES.

Children will also enjoy making a garland from natural materials. If you have small pine cones, they are perfect for a New Year's garland. They are quite light. If you dry the cones on a radiator or in the oven, they will open their scales and can be easily painted with gouache. bright colors. After the paint has dried, it is better to spray it with hairspray - this will make the color brighter and stop getting your hands dirty (the color is fixed). We make eyes, a beak from plasticine and sew hats from red felt (or red paper). We attach the cap to the pine cone with glue.

You can make others based on the cone New Year's characters, gnomes or Santa Claus. If he paints the pine cone white, we will get the basis for the snowman.

New Year's garlands

IDEA WITH A DEER.

The simplest garlands with deer are a flat silhouette made of cardboard, which is decorated with an applique of colored paper. In one evening you can cut out 20-30 such silhouettes. Then glue on the faces, spots, and decorate the hooves with a black marker. Separately, cut out the horns from black cardboard and attach them to a stapler.

And here interesting design module for a garland in the form of a THREE-LAYER deer. Everything in the photo is quite clear here. We cut out three silhouettes and string them with string BETWEEN THEM, inserting thick layers - either from beads, or from a cut-up cocktail tube, or simply from lumps of paper.

New Year's idea

For a garland with Santa Claus.

Here are ideas for garlands of pendants with the image of Santa Claus, the easiest way is to cut out triangles from red cardboard, glue a strip of a face and a beard made of cotton wool to them from beige paper.

Here are ideas for a quick garland from cotton pads. Here, using glue-pva (or hot glue), we attach a face made of pink paper, a mustache (from pieces of a disk), a red nose and a hat made of cardboard.

The garland looks good not with small modules, but with large elements. For example, in the photo below, the New Year's row of Santa Clauses looks impressive and bright due to its size.

New Year's garlands

FROM PAPER STRIPES.

And here is an example of a beautiful garland with lanterns. For a flashlight you need five strips - 2 long red, 2 slightly shorter green, 1 shortest red. We connect the strips with edges using a STAPLER - from the upper end and from the lower end. Then, just below the top staple fastening, we make a hole with a hole punch - to string it on a rope.

Using the same scheme, these lanterns for the garland are made. A strip of paper is folded into several folds (diamond-shaped). The edges are connected at the top with a stapler. Around this upper end we make a wrapping from a gray strip of paper (this turns out to be the base of a light bulb).

And since we touched on the topic of flashlights, here’s more for you idea of ​​three-dimensional modules-bulbs for a garland. A little later I will make and post a diagram and template for such a light bulb.

You can also twist paper strips into twisted strands. And then we will get twisted modules for quilling crafts. We make green New Year wreaths or Christmas trees from the modules and string these crafts onto a garland.

New Year's garlands

WITH BLADE modules.

In the photo below we see an example of how beautiful the blade modules look on a garland. How to make such blades three-dimensional figures I showed it in the master class below.

Using the paddle technique, you can make not only circles, but also any other SYMMETRICAL SHAPE shapes. That is, the main thing is that this figure has the same sides - right and left. Like a star (with photo below) and like a snowman, for example.

New Year's garlands

DIY FOLD BEDS.

Here is a garland with minimal paper consumption. We cut out the triangles - we bend the triangle in half vertically (along the center line). And we make cuts - from the edge and from the side of the fold line too (as shown in the diagram below - in a checkerboard pattern). After this, our triangle can be stretched - like a spring, and you will get a Christmas tree.

You can use short strips of paper to make small fans (staple them at one end) or bend them in half and glue the halves together (as shown in the photo). And then we assemble a colored garland from the fans using the same stapler (or glue). It can be hung above the door, along the wall, along the mantelpiece, along the curtain rod, along the stair railing.

Such a garland can be made from fans of different heights. And then the tall fans will look like FIR-trees. You can make it green (like a Christmas tree), and make intermediate middle fans white(like snow).

You can cut the fan so that it has a leg in the center as in the photo of the garland below.

Based on a round fan, you can make many different modules for a garland pendant for the New Year. With Santa Claus, with deer, with a snowman, with a penguin.

Garlands-STARS

for the New Year with your own hands.

And here are ideas where the garlands are made in the shape of the symbol of the New Year - a star. There is an article on our website where we make stars out of paper - there you will find a lot different ways. And here I post those that are not there.

I really like this option - it is very economical in terms of paper consumption. From just one strip of paper you can make a VOLUME large star. This is cool.

And follow the garland rule - alternate colors. In the photo below, if all the stars were the same color, the garland would be lost. And then there is an alternation of two contrasting colors and the garland hits the eye brightly

But the star is made of thick paper or cardboard. Here, please note, you need TWO-COLOR cardboard (so that all edges are colored).

Or, to save money, you can simply make such stars out of white paper (thick for drawing) and then use dry wax crayons to draw your own patterns of curls or stripes on this white paper.

But the easiest way to quickly make a star out of paper is with ready-made folds for embossed edges (so that the star immediately has a convex volume).

We fold a regular sheet of paper in the manner shown in the diagram below.

Here again we see what it looks like in the photographs.

New Year's garlands

From toilet paper rolls.

You can string these New Year's gnomes onto a garland. We paint the toilet paper tubes in different colors with gouache (or cover them with colored paper). Wool threads we fold it into a bundle in several folds - we cut off the ends of the bundle, bend it in half and glue it to the sleeve with hot glue from a gun. On top we make a hat out of paper - it can be white, or it can be colored (red like Santa Claus with a white border around the edge). The border can be made from white lace braid (button shops cost mere pennies).

If a paper roll is cut into rings, then many more modules for an indoor New Year's garland can be made from this material. For example, these snowflakes are obtained if the rings are inserted into each other - connecting them in the center with threads (the stitch is as if we are sewing a button, and cover it with glitter). The rings themselves need to be painted in the color of the snowflake (white or blue).

You can make bright flowers if you cover the back side of the ring with colored crepe corrugated paper.

Such flowers made from ruts from a sleeve can be decorated inside with a fluffy wire brush. Or quilling modules made from paper twists.

Children's garland for the New Year

WITH BELLS.

An excellent material for a DIY New Year's garland is CAPSULES from a coffee machine. Used coffee capsules look like little bells. We make a hole in the bottom of them, thread a silver or gold ribbon through it, thread a bead and tie a knot (the bead can be twisted into a piece of foil). We string bells onto a long and narrow Christmas tree brush garland (from the store) - you can do it in pairs, or you can do it one at a time and we get a long and shiny garland with bells for the New Year.

You can make bells for a New Year's garland from an egg carton, easy colored paper (pictured below). You can make bells using the blade gluing technique.

Knitted New Year's garlands

With my own hands.

On our website there is an article about how to crochet Christmas trees. And there I give instructions for creating flat Christmas trees. Like those in the photo below.

If such trees are strung on a long string, then we will get a garland to decorate the walls or mantelpiece on New Year's days. Below we see the works of Natalia Pushkina - combinations of two shades of green and red beads gave the Christmas tree a warm festive coloring.

You can create flat Christmas trees for the garland using a DIFFERENT crochet pattern. For example, like the ones in the photo below.

You can take absolutely any New Year's symbol as elements of the garland. For example, a Christmas wreath or bright light bulbs.

The wreath is knitted around a ring (plastic rings are sold in the same section of the store as buttons - these are clothing accessories). We tie such a ring with single crochets and knit lace on it. We thread a red ribbon through the lace and get a quick garland element.

You can knit small snowflakes and string them onto a garland. Many snowflake patterns crocheted, posted in a special article “ Knitted snowflakes crochet"

Or you can tie New Year's stars onto a garland, as in the photo below.

Here is a master class below, where you can see exactly how such a star fits.

Your knitted modules for a garland can depict any symbol of the New Year - Christmas decorations, holly leaves.

Below I am posting a master class on knitting a holly leaf.

From the leaves left after the garland you can make a Christmas knitted wreath like this.

These are the tips for creating a New Year's garland with your own hands that I presented here. This new year, you have the opportunity to decorate your home in an unusually bright and interesting way - together with your children.

I wish you a fun evening and a beautiful result.

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.